kgdb.c 14.1 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598
/* taken from arch/powerpc/kernel/ppc-stub.c */

/****************************************************************************

		THIS SOFTWARE IS NOT COPYRIGHTED

   HP offers the following for use in the public domain.  HP makes no
   warranty with regard to the software or its performance and the
   user accepts the software "AS IS" with all faults.

   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

****************************************************************************/

/****************************************************************************
 *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
 *
 *  Module name: remcom.c $
 *  Revision: 1.34 $
 *  Date: 91/03/09 12:29:49 $
 *  Contributor:     Lake Stevens Instrument Division$
 *
 *  Description:     low level support for gdb debugger. $
 *
 *  Considerations:  only works on target hardware $
 *
 *  Written by:      Glenn Engel $
 *  ModuleState:     Experimental $
 *
 *  NOTES:           See Below $
 *
 *  Modified for SPARC by Stu Grossman, Cygnus Support.
 *
 *  This code has been extensively tested on the Fujitsu SPARClite demo board.
 *
 *  To enable debugger support, two things need to happen.  One, a
 *  call to set_debug_traps() is necessary in order to allow any breakpoints
 *  or error conditions to be properly intercepted and reported to gdb.
 *  Two, a breakpoint needs to be generated to begin communication.  This
 *  is most easily accomplished by a call to breakpoint().  Breakpoint()
 *  simulates a breakpoint by executing a trap #1.
 *
 *************
 *
 *    The following gdb commands are supported:
 *
 * command          function                               Return value
 *
 *    g             return the value of the CPU registers  hex data or ENN
 *    G             set the value of the CPU registers     OK or ENN
 *    qOffsets      Get section offsets.  Reply is Text=xxx;Data=yyy;Bss=zzz
 *
 *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
 *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
 *
 *    c             Resume at current address              SNN   ( signal NN)
 *    cAA..AA       Continue at address AA..AA             SNN
 *
 *    s             Step one instruction                   SNN
 *    sAA..AA       Step one instruction from AA..AA       SNN
 *
 *    k             kill
 *
 *    ?             What was the last sigval ?             SNN   (signal NN)
 *
 *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
 *							   baud rate
 *
 * All commands and responses are sent with a packet which includes a
 * checksum.  A packet consists of
 *
 * $<packet info>#<checksum>.
 *
 * where
 * <packet info> :: <characters representing the command or response>
 * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
 *
 * When a packet is received, it is first acknowledged with either '+' or '-'.
 * '+' indicates a successful transfer.  '-' indicates a failed transfer.
 *
 * Example:
 *
 * Host:                  Reply:
 * $m0,10#2a               +$00010203040506070809101112131415#42
 *
 ****************************************************************************/

#include <common.h>

#include <kgdb.h>
#include <command.h>

#undef KGDB_DEBUG

/*
 * BUFMAX defines the maximum number of characters in inbound/outbound buffers
 */
#define BUFMAX 1024
static char remcomInBuffer[BUFMAX];
static char remcomOutBuffer[BUFMAX];
static char remcomRegBuffer[BUFMAX];

static int initialized = 0;
static int kgdb_active;
static struct pt_regs entry_regs;
static long error_jmp_buf[BUFMAX/2];
static int longjmp_on_fault = 0;
#ifdef KGDB_DEBUG
static int kdebug = 1;
#endif

static const char hexchars[]="0123456789abcdef";

/* Convert ch from a hex digit to an int */
static int
hex(unsigned char ch)
{
	if (ch >= 'a' && ch <= 'f')
		return ch-'a'+10;
	if (ch >= '0' && ch <= '9')
		return ch-'0';
	if (ch >= 'A' && ch <= 'F')
		return ch-'A'+10;
	return -1;
}

/* Convert the memory pointed to by mem into hex, placing result in buf.
 * Return a pointer to the last char put in buf (null).
 */
static unsigned char *
mem2hex(char *mem, char *buf, int count)
{
	char *tmp;
	unsigned char ch;

	/*
	 * We use the upper half of buf as an intermediate buffer for the
	 * raw memory copy.  Hex conversion will work against this one.
	 */
	tmp = buf + count;
	longjmp_on_fault = 1;

	memcpy(tmp, mem, count);

	while (count-- > 0) {
		ch = *tmp++;
		*buf++ = hexchars[ch >> 4];
		*buf++ = hexchars[ch & 0xf];
	}
	*buf = 0;
	longjmp_on_fault = 0;
	return (unsigned char *)buf;
}

/* convert the hex array pointed to by buf into binary to be placed in mem
 * return a pointer to the character AFTER the last byte fetched from buf.
*/
static char *
hex2mem(char *buf, char *mem, int count)
{
	int hexValue;
	char *tmp_raw, *tmp_hex;

	/*
	 * We use the upper half of buf as an intermediate buffer for the
	 * raw memory that is converted from hex.
	 */
	tmp_raw = buf + count * 2;
	tmp_hex = tmp_raw - 1;

	longjmp_on_fault = 1;
	while (tmp_hex >= buf) {
		tmp_raw--;
		hexValue = hex(*tmp_hex--);
		if (hexValue < 0)
			kgdb_error(KGDBERR_NOTHEXDIG);
		*tmp_raw = hexValue;
		hexValue = hex(*tmp_hex--);
		if (hexValue < 0)
			kgdb_error(KGDBERR_NOTHEXDIG);
		*tmp_raw |= hexValue << 4;

	}

	memcpy(mem, tmp_raw, count);

	kgdb_flush_cache_range((void *)mem, (void *)(mem+count));
	longjmp_on_fault = 0;

	return buf;
}

/*
 * While we find nice hex chars, build an int.
 * Return number of chars processed.
 */
static int
hexToInt(char **ptr, int *intValue)
{
	int numChars = 0;
	int hexValue;

	*intValue = 0;

	longjmp_on_fault = 1;
	while (**ptr) {
		hexValue = hex(**ptr);
		if (hexValue < 0)
			break;

		*intValue = (*intValue << 4) | hexValue;
		numChars ++;

		(*ptr)++;
	}
	longjmp_on_fault = 0;

	return (numChars);
}

/* scan for the sequence $<data>#<checksum>     */
static void
getpacket(char *buffer)
{
	unsigned char checksum;
	unsigned char xmitcsum;
	int i;
	int count;
	unsigned char ch;

	do {
		/* wait around for the start character, ignore all other
		 * characters */
		while ((ch = (getDebugChar() & 0x7f)) != '$') {
#ifdef KGDB_DEBUG
			if (kdebug)
				putc(ch);
#endif
			;
		}

		checksum = 0;
		xmitcsum = -1;

		count = 0;

		/* now, read until a # or end of buffer is found */
		while (count < BUFMAX) {
			ch = getDebugChar() & 0x7f;
			if (ch == '#')
				break;
			checksum = checksum + ch;
			buffer[count] = ch;
			count = count + 1;
		}

		if (count >= BUFMAX)
			continue;

		buffer[count] = 0;

		if (ch == '#') {
			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
			xmitcsum |= hex(getDebugChar() & 0x7f);
			if (checksum != xmitcsum)
				putDebugChar('-');	/* failed checksum */
			else {
				putDebugChar('+'); /* successful transfer */
				/* if a sequence char is present, reply the ID */
				if (buffer[2] == ':') {
					putDebugChar(buffer[0]);
					putDebugChar(buffer[1]);
					/* remove sequence chars from buffer */
					count = strlen(buffer);
					for (i=3; i <= count; i++)
						buffer[i-3] = buffer[i];
				}
			}
		}
	} while (checksum != xmitcsum);
}

/* send the packet in buffer.  */
static void
putpacket(unsigned char *buffer)
{
	unsigned char checksum;
	int count;
	unsigned char ch, recv;

	/*  $<packet info>#<checksum>. */
	do {
		putDebugChar('$');
		checksum = 0;
		count = 0;

		while ((ch = buffer[count])) {
			putDebugChar(ch);
			checksum += ch;
			count += 1;
		}

		putDebugChar('#');
		putDebugChar(hexchars[checksum >> 4]);
		putDebugChar(hexchars[checksum & 0xf]);
		recv = getDebugChar();
	} while ((recv & 0x7f) != '+');
}

/*
 * This function does all command processing for interfacing to gdb.
 */
static int
handle_exception (struct pt_regs *regs)
{
	int addr;
	int length;
	char *ptr;
	kgdb_data kd;
	int i;

	if (!initialized) {
		printf("kgdb: exception before kgdb is initialized! huh?\n");
		return (0);
	}

	/* probably should check which exception occured as well */
	if (longjmp_on_fault) {
		longjmp_on_fault = 0;
		kgdb_longjmp(error_jmp_buf, KGDBERR_MEMFAULT);
		panic("kgdb longjump failed!\n");
	}

	if (kgdb_active) {
		printf("kgdb: unexpected exception from within kgdb\n");
		return (0);
	}
	kgdb_active = 1;

	kgdb_interruptible(0);

	printf("kgdb: handle_exception; trap [0x%x]\n", kgdb_trap(regs));

	if (kgdb_setjmp(error_jmp_buf) != 0)
		panic("kgdb: error or fault in entry init!\n");

	kgdb_enter(regs, &kd);

	entry_regs = *regs;

	ptr = remcomOutBuffer;

	*ptr++ = 'T';

	*ptr++ = hexchars[kd.sigval >> 4];
	*ptr++ = hexchars[kd.sigval & 0xf];

	for (i = 0; i < kd.nregs; i++) {
		kgdb_reg *rp = &kd.regs[i];

		*ptr++ = hexchars[rp->num >> 4];
		*ptr++ = hexchars[rp->num & 0xf];
		*ptr++ = ':';
		ptr = (char *)mem2hex((char *)&rp->val, ptr, 4);
		*ptr++ = ';';
	}

	*ptr = 0;

#ifdef KGDB_DEBUG
	if (kdebug)
		printf("kgdb: remcomOutBuffer: %s\n", remcomOutBuffer);
#endif

	putpacket((unsigned char *)&remcomOutBuffer);

	while (1) {
		volatile int errnum;

		remcomOutBuffer[0] = 0;

		getpacket(remcomInBuffer);
		ptr = &remcomInBuffer[1];

#ifdef KGDB_DEBUG
		if (kdebug)
			printf("kgdb:  remcomInBuffer: %s\n", remcomInBuffer);
#endif

		errnum = kgdb_setjmp(error_jmp_buf);

		if (errnum == 0) switch (remcomInBuffer[0]) {

		case '?':               /* report most recent signal */
			remcomOutBuffer[0] = 'S';
			remcomOutBuffer[1] = hexchars[kd.sigval >> 4];
			remcomOutBuffer[2] = hexchars[kd.sigval & 0xf];
			remcomOutBuffer[3] = 0;
			break;

#ifdef KGDB_DEBUG
		case 'd':
			/* toggle debug flag */
			kdebug ^= 1;
			break;
#endif

		case 'g':	/* return the value of the CPU registers. */
			length = kgdb_getregs(regs, remcomRegBuffer, BUFMAX);
			mem2hex(remcomRegBuffer, remcomOutBuffer, length);
			break;

		case 'G':   /* set the value of the CPU registers */
			length = strlen(ptr);
			if ((length & 1) != 0) kgdb_error(KGDBERR_BADPARAMS);
			hex2mem(ptr, remcomRegBuffer, length/2);
			kgdb_putregs(regs, remcomRegBuffer, length/2);
			strcpy(remcomOutBuffer,"OK");
			break;

		case 'm':	/* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
				/* Try to read %x,%x.  */

			if (hexToInt(&ptr, &addr)
			    && *ptr++ == ','
			    && hexToInt(&ptr, &length))	{
				mem2hex((char *)addr, remcomOutBuffer, length);
			} else {
				kgdb_error(KGDBERR_BADPARAMS);
			}
			break;

		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
			/* Try to read '%x,%x:'.  */

			if (hexToInt(&ptr, &addr)
			    && *ptr++ == ','
			    && hexToInt(&ptr, &length)
			    && *ptr++ == ':') {
				hex2mem(ptr, (char *)addr, length);
				strcpy(remcomOutBuffer, "OK");
			} else {
				kgdb_error(KGDBERR_BADPARAMS);
			}
			break;


		case 'k':    /* kill the program, actually return to monitor */
			kd.extype = KGDBEXIT_KILL;
			*regs = entry_regs;
			goto doexit;

		case 'C':    /* CSS  continue with signal SS */
			*ptr = '\0';	/* ignore the signal number for now */
			/* fall through */

		case 'c':    /* cAA..AA  Continue; address AA..AA optional */
			/* try to read optional parameter, pc unchanged if no parm */
			kd.extype = KGDBEXIT_CONTINUE;

			if (hexToInt(&ptr, &addr)) {
				kd.exaddr = addr;
				kd.extype |= KGDBEXIT_WITHADDR;
			}

			goto doexit;

		case 'S':    /* SSS  single step with signal SS */
			*ptr = '\0';	/* ignore the signal number for now */
			/* fall through */

		case 's':
			kd.extype = KGDBEXIT_SINGLE;

			if (hexToInt(&ptr, &addr)) {
				kd.exaddr = addr;
				kd.extype |= KGDBEXIT_WITHADDR;
			}

		doexit:
/* Need to flush the instruction cache here, as we may have deposited a
 * breakpoint, and the icache probably has no way of knowing that a data ref to
 * some location may have changed something that is in the instruction cache.
 */
			kgdb_flush_cache_all();
			kgdb_exit(regs, &kd);
			kgdb_active = 0;
			kgdb_interruptible(1);
			return (1);

		case 'r':		/* Reset (if user process..exit ???)*/
			panic("kgdb reset.");
			break;

		case 'P':    /* Pr=v  set reg r to value v (r and v are hex) */
			if (hexToInt(&ptr, &addr)
			    && *ptr++ == '='
			    && ((length = strlen(ptr)) & 1) == 0) {
				hex2mem(ptr, remcomRegBuffer, length/2);
				kgdb_putreg(regs, addr,
					remcomRegBuffer, length/2);
				strcpy(remcomOutBuffer,"OK");
			} else {
				kgdb_error(KGDBERR_BADPARAMS);
			}
			break;
		}			/* switch */

		if (errnum != 0)
			sprintf(remcomOutBuffer, "E%02d", errnum);

#ifdef KGDB_DEBUG
		if (kdebug)
			printf("kgdb: remcomOutBuffer: %s\n", remcomOutBuffer);
#endif

		/* reply to the request */
		putpacket((unsigned char *)&remcomOutBuffer);

	} /* while(1) */
}

/*
 * kgdb_init must be called *after* the
 * monitor is relocated into ram
 */
void
kgdb_init(void)
{
	kgdb_serial_init();
	debugger_exception_handler = handle_exception;
	initialized = 1;

	putDebugStr("kgdb ready\n");
	puts("ready\n");
}

void
kgdb_error(int errnum)
{
	longjmp_on_fault = 0;
	kgdb_longjmp(error_jmp_buf, errnum);
	panic("kgdb_error: longjmp failed!\n");
}

/* Output string in GDB O-packet format if GDB has connected. If nothing
   output, returns 0 (caller must then handle output). */
int
kgdb_output_string (const char* s, unsigned int count)
{
	char buffer[512];

	count = (count <= (sizeof(buffer) / 2 - 2))
		? count : (sizeof(buffer) / 2 - 2);

	buffer[0] = 'O';
	mem2hex ((char *)s, &buffer[1], count);
	putpacket((unsigned char *)&buffer);

	return 1;
}

void
breakpoint(void)
{
	if (!initialized) {
		printf("breakpoint() called b4 kgdb init\n");
		return;
	}

	kgdb_breakpoint(0, 0);
}

int
do_kgdb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
    printf("Entering KGDB mode via exception handler...\n\n");
    kgdb_breakpoint(argc - 1, argv + 1);
    printf("\nReturned from KGDB mode\n");
    return 0;
}

U_BOOT_CMD(
	kgdb, CONFIG_SYS_MAXARGS, 1,	do_kgdb,
	"enter gdb remote debug mode",
	"[arg0 arg1 .. argN]\n"
	"    - executes a breakpoint so that kgdb mode is\n"
	"      entered via the exception handler. To return\n"
	"      to the monitor, the remote gdb debugger must\n"
	"      execute a \"continue\" or \"quit\" command.\n"
	"\n"
	"      if a program is loaded by the remote gdb, any args\n"
	"      passed to the kgdb command are given to the loaded\n"
	"      program if it is executed (see the \"hello_world\"\n"
	"      example program in the U-Boot examples directory)."
);