config_distro_bootcmd.h 17.8 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491
/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2014
 * NVIDIA Corporation <www.nvidia.com>
 *
 * Copyright 2014 Red Hat, Inc.
 */

#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
#define _CONFIG_CMD_DISTRO_BOOTCMD_H

/*
 * A note on error handling: It is possible for BOOT_TARGET_DEVICES to
 * reference a device that is not enabled in the U-Boot configuration, e.g.
 * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given
 * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor
 * at compile time, it's not  possible to detect and report such problems via
 * a simple #ifdef/#error combination. Still, the code needs to report errors.
 * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to
 * reference a non-existent symbol, and have the name of that symbol encode
 * the error message. Consequently, this file contains references to e.g.
 * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the
 * prevalence of capitals here, this looks like a pre-processor macro and
 * hence seems like it should be all capitals, but it's really an error
 * message that includes some other pre-processor symbols in the text.
 */

#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
		"if " #devtypel " dev ${devnum}; then " \
			"devtype=" #devtypel "; " \
			"run scan_dev_for_boot_part; " \
		"fi\0"

#define BOOTENV_SHARED_BLKDEV(devtypel) \
	#devtypel "_boot=" \
	BOOTENV_SHARED_BLKDEV_BODY(devtypel)

#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \
	"bootcmd_" #devtypel #instance "=" \
		"devnum=" #instance "; " \
		"run " #devtypel "_boot\0"

#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \
	#devtypel #instance " "

#ifdef CONFIG_SANDBOX
#define BOOTENV_SHARED_HOST	BOOTENV_SHARED_BLKDEV(host)
#define BOOTENV_DEV_HOST	BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_HOST	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_HOST
#define BOOTENV_DEV_HOST \
	BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX
#define BOOTENV_DEV_NAME_HOST \
	BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX
#endif

#ifdef CONFIG_CMD_MMC
#define BOOTENV_SHARED_MMC	BOOTENV_SHARED_BLKDEV(mmc)
#define BOOTENV_DEV_MMC		BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_MMC	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_MMC
#define BOOTENV_DEV_MMC \
	BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
#define BOOTENV_DEV_NAME_MMC \
	BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
#endif

#ifdef CONFIG_CMD_UBIFS
#define BOOTENV_SHARED_UBIFS \
	"ubifs_boot=" \
		"env exists bootubipart || " \
			"env set bootubipart UBI; " \
		"env exists bootubivol || " \
			"env set bootubivol boot; " \
		"if ubi part ${bootubipart} && " \
			"ubifsmount ubi${devnum}:${bootubivol}; " \
		"then " \
			"devtype=ubi; " \
			"run scan_dev_for_boot; " \
		"fi\0"
#define BOOTENV_DEV_UBIFS	BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_UBIFS	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_UBIFS
#define BOOTENV_DEV_UBIFS \
	BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS
#define BOOTENV_DEV_NAME_UBIFS \
	BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS
#endif

#ifdef CONFIG_EFI_LOADER
#if defined(CONFIG_ARM64)
#define BOOTEFI_NAME "bootaa64.efi"
#elif defined(CONFIG_ARM)
#define BOOTEFI_NAME "bootarm.efi"
#elif defined(CONFIG_X86_RUN_32BIT)
#define BOOTEFI_NAME "bootia32.efi"
#elif defined(CONFIG_X86_RUN_64BIT)
#define BOOTEFI_NAME "bootx64.efi"
#elif defined(CONFIG_ARCH_RV32I)
#define BOOTEFI_NAME "bootriscv32.efi"
#elif defined(CONFIG_ARCH_RV64I)
#define BOOTEFI_NAME "bootriscv64.efi"
#endif
#endif

#ifdef BOOTEFI_NAME
#if defined(CONFIG_ARM) && !defined(CONFIG_ARM64)
/*
 * On 32bit ARM systems there is a reasonable number of systems that follow
 * the $soc-$board$boardver.dtb name scheme for their device trees. Use that
 * scheme if we don't have an explicit fdtfile variable.
 */
#define BOOTENV_EFI_SET_FDTFILE_FALLBACK                                  \
	"if test -z \"${fdtfile}\" -a -n \"${soc}\"; then "               \
	  "setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; "           \
	"fi; "
#else
#define BOOTENV_EFI_SET_FDTFILE_FALLBACK
#endif


#define BOOTENV_SHARED_EFI                                                \
	"boot_efi_binary="                                                \
		"if fdt addr ${fdt_addr_r}; then "                        \
			"bootefi bootmgr ${fdt_addr_r};"                  \
		"else "                                                   \
			"bootefi bootmgr ${fdtcontroladdr};"              \
		"fi;"                                                     \
		"load ${devtype} ${devnum}:${distro_bootpart} "           \
			"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; "      \
		"if fdt addr ${fdt_addr_r}; then "                        \
			"bootefi ${kernel_addr_r} ${fdt_addr_r};"         \
		"else "                                                   \
			"bootefi ${kernel_addr_r} ${fdtcontroladdr};"     \
		"fi\0"                                                    \
	\
	"load_efi_dtb="                                                   \
		"load ${devtype} ${devnum}:${distro_bootpart} "           \
			"${fdt_addr_r} ${prefix}${efi_fdtfile}\0"         \
	\
	"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0"                        \
	"scan_dev_for_efi="                                               \
		"setenv efi_fdtfile ${fdtfile}; "                         \
		BOOTENV_EFI_SET_FDTFILE_FALLBACK                          \
		"for prefix in ${efi_dtb_prefixes}; do "                  \
			"if test -e ${devtype} "                          \
					"${devnum}:${distro_bootpart} "   \
					"${prefix}${efi_fdtfile}; then "  \
				"run load_efi_dtb; "                      \
			"fi;"                                             \
		"done;"                                                   \
		"if test -e ${devtype} ${devnum}:${distro_bootpart} "     \
					"efi/boot/"BOOTEFI_NAME"; then "  \
				"echo Found EFI removable media binary "  \
					"efi/boot/"BOOTEFI_NAME"; "       \
				"run boot_efi_binary; "                   \
				"echo EFI LOAD FAILED: continuing...; "   \
		"fi; "                                                    \
		"setenv efi_fdtfile\0"
#define SCAN_DEV_FOR_EFI "run scan_dev_for_efi;"
#else
#define BOOTENV_SHARED_EFI
#define SCAN_DEV_FOR_EFI
#endif

#ifdef CONFIG_SATA
#define BOOTENV_SHARED_SATA	BOOTENV_SHARED_BLKDEV(sata)
#define BOOTENV_DEV_SATA	BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_SATA	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_SATA
#define BOOTENV_DEV_SATA \
	BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
#define BOOTENV_DEV_NAME_SATA \
	BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
#endif

#ifdef CONFIG_NVME
#define BOOTENV_RUN_NVME_INIT "run nvme_init; "
#define BOOTENV_SET_NVME_NEED_INIT "setenv nvme_need_init; "
#define BOOTENV_SHARED_NVME \
	"nvme_init=" \
		"if ${nvme_need_init}; then " \
			"setenv nvme_need_init false; " \
			"nvme scan; " \
		"fi\0" \
	\
	"nvme_boot=" \
		BOOTENV_RUN_NVME_INIT \
		BOOTENV_SHARED_BLKDEV_BODY(nvme)
#define BOOTENV_DEV_NVME	BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_NVME	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_NVME_INIT
#define BOOTENV_SET_NVME_NEED_INIT
#define BOOTENV_SHARED_NVME
#define BOOTENV_DEV_NVME \
	BOOT_TARGET_DEVICES_references_NVME_without_CONFIG_NVME
#define BOOTENV_DEV_NAME_NVME \
	BOOT_TARGET_DEVICES_references_NVME_without_CONFIG_NVME
#endif

#ifdef CONFIG_SCSI
#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
#define BOOTENV_SET_SCSI_NEED_INIT "scsi_need_init=; "
#define BOOTENV_SHARED_SCSI \
	"scsi_init=" \
		"if ${scsi_need_init}; then " \
			"scsi_need_init=false; " \
			"scsi scan; " \
		"fi\0" \
	\
	"scsi_boot=" \
		BOOTENV_RUN_SCSI_INIT \
		BOOTENV_SHARED_BLKDEV_BODY(scsi)
#define BOOTENV_DEV_SCSI	BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_SCSI	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_SCSI_INIT
#define BOOTENV_SET_SCSI_NEED_INIT
#define BOOTENV_SHARED_SCSI
#define BOOTENV_DEV_SCSI \
	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
#define BOOTENV_DEV_NAME_SCSI \
	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
#endif

#ifdef CONFIG_IDE
#define BOOTENV_RUN_IDE_INIT "run ide_init; "
#define BOOTENV_SET_IDE_NEED_INIT "setenv ide_need_init; "
#define BOOTENV_SHARED_IDE \
	"ide_init=" \
		"if ${ide_need_init}; then " \
			"setenv ide_need_init false; " \
			"ide reset; " \
		"fi\0" \
	\
	"ide_boot=" \
		BOOTENV_RUN_IDE_INIT \
		BOOTENV_SHARED_BLKDEV_BODY(ide)
#define BOOTENV_DEV_IDE		BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_IDE	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_IDE_INIT
#define BOOTENV_SET_IDE_NEED_INIT
#define BOOTENV_SHARED_IDE
#define BOOTENV_DEV_IDE \
	BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
#define BOOTENV_DEV_NAME_IDE \
	BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
#endif

#if defined(CONFIG_DM_PCI)
#define BOOTENV_RUN_PCI_ENUM "run boot_pci_enum; "
#define BOOTENV_SHARED_PCI \
	"boot_pci_enum=pci enum\0"
#else
#define BOOTENV_RUN_PCI_ENUM
#define BOOTENV_SHARED_PCI
#endif

#ifdef CONFIG_CMD_USB
#define BOOTENV_RUN_NET_USB_START "run boot_net_usb_start; "
#define BOOTENV_SHARED_USB \
	"boot_net_usb_start=usb start\0" \
	"usb_boot=" \
		"usb start; " \
		BOOTENV_SHARED_BLKDEV_BODY(usb)
#define BOOTENV_DEV_USB		BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_USB	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_NET_USB_START
#define BOOTENV_SHARED_USB
#define BOOTENV_DEV_USB \
	BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
#define BOOTENV_DEV_NAME_USB \
	BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
#endif

#ifdef CONFIG_CMD_VIRTIO
#define BOOTENV_RUN_VIRTIO_INIT "run virtio_init; "
#define BOOTENV_SET_VIRTIO_NEED_INIT "virtio_need_init=; "
#define BOOTENV_SHARED_VIRTIO \
	"virtio_init=" \
		"if ${virtio_need_init}; then " \
			"virtio_need_init=false; " \
			"virtio scan; " \
		"fi\0" \
	\
	"virtio_boot=" \
		BOOTENV_RUN_PCI_ENUM \
		BOOTENV_RUN_VIRTIO_INIT \
		BOOTENV_SHARED_BLKDEV_BODY(virtio)
#define BOOTENV_DEV_VIRTIO	BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_VIRTIO	BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_RUN_VIRTIO_INIT
#define BOOTENV_SET_VIRTIO_NEED_INIT
#define BOOTENV_SHARED_VIRTIO
#define BOOTENV_DEV_VIRTIO \
	BOOT_TARGET_DEVICES_references_VIRTIO_without_CONFIG_CMD_VIRTIO
#define BOOTENV_DEV_NAME_VIRTIO \
	BOOT_TARGET_DEVICES_references_VIRTIO_without_CONFIG_CMD_VIRTIO
#endif

#if defined(CONFIG_CMD_DHCP)
#if defined(CONFIG_EFI_LOADER)
/* http://www.iana.org/assignments/dhcpv6-parameters/dhcpv6-parameters.xml */
#if defined(CONFIG_ARM64) || defined(__aarch64__)
#define BOOTENV_EFI_PXE_ARCH "0xb"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00011:UNDI:003000"
#elif defined(CONFIG_ARM) || defined(__arm__)
#define BOOTENV_EFI_PXE_ARCH "0xa"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00010:UNDI:003000"
#elif defined(CONFIG_X86) || defined(__x86_64__)
#define BOOTENV_EFI_PXE_ARCH "0x7"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00007:UNDI:003000"
#elif defined(__i386__)
#define BOOTENV_EFI_PXE_ARCH "0x6"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00006:UNDI:003000"
#elif defined(CONFIG_ARCH_RV32I) || ((defined(__riscv) && __riscv_xlen == 32))
#define BOOTENV_EFI_PXE_ARCH "0x19"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00025:UNDI:003000"
#elif defined(CONFIG_ARCH_RV64I) || ((defined(__riscv) && __riscv_xlen == 64))
#define BOOTENV_EFI_PXE_ARCH "0x1b"
#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00027:UNDI:003000"
#elif defined(CONFIG_SANDBOX)
# error "sandbox EFI support is only supported on ARM and x86"
#else
#error Please specify an EFI client identifier
#endif

/*
 * Ask the dhcp server for an EFI binary. If we get one, check for a
 * device tree in the same folder. Then boot everything. If the file was
 * not an EFI binary, we just return from the bootefi command and continue.
 */
#define BOOTENV_EFI_RUN_DHCP \
	"setenv efi_fdtfile ${fdtfile}; "                                 \
	BOOTENV_EFI_SET_FDTFILE_FALLBACK                                  \
	"setenv efi_old_vci ${bootp_vci};"                                \
	"setenv efi_old_arch ${bootp_arch};"                              \
	"setenv bootp_vci " BOOTENV_EFI_PXE_VCI ";"                       \
	"setenv bootp_arch " BOOTENV_EFI_PXE_ARCH ";"                     \
	"if dhcp ${kernel_addr_r}; then "                                 \
		"tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};"              \
		"if fdt addr ${fdt_addr_r}; then "                        \
			"bootefi ${kernel_addr_r} ${fdt_addr_r}; "        \
		"else "                                                   \
			"bootefi ${kernel_addr_r} ${fdtcontroladdr};"     \
		"fi;"                                                     \
	"fi;"                                                             \
	"setenv bootp_vci ${efi_old_vci};"                                \
	"setenv bootp_arch ${efi_old_arch};"                              \
	"setenv efi_fdtfile;"                                             \
	"setenv efi_old_arch;"                                            \
	"setenv efi_old_vci;"
#else
#define BOOTENV_EFI_RUN_DHCP
#endif
#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
	"bootcmd_dhcp=" \
		BOOTENV_RUN_NET_USB_START \
		BOOTENV_RUN_PCI_ENUM \
		"if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
			"source ${scriptaddr}; " \
		"fi;" \
		BOOTENV_EFI_RUN_DHCP \
		"\0"
#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
	"dhcp "
#else
#define BOOTENV_DEV_DHCP \
	BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
#define BOOTENV_DEV_NAME_DHCP \
	BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
#endif

#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
	"bootcmd_pxe=" \
		BOOTENV_RUN_NET_USB_START \
		BOOTENV_RUN_PCI_ENUM \
		"dhcp; " \
		"if pxe get; then " \
			"pxe boot; " \
		"fi\0"
#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \
	"pxe "
#else
#define BOOTENV_DEV_PXE \
	BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
#define BOOTENV_DEV_NAME_PXE \
	BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
#endif

#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \
	BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance)
#define BOOTENV_BOOT_TARGETS \
	"boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"

#define BOOTENV_DEV(devtypeu, devtypel, instance) \
	BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
#define BOOTENV \
	BOOTENV_SHARED_HOST \
	BOOTENV_SHARED_MMC \
	BOOTENV_SHARED_PCI \
	BOOTENV_SHARED_USB \
	BOOTENV_SHARED_SATA \
	BOOTENV_SHARED_SCSI \
	BOOTENV_SHARED_NVME \
	BOOTENV_SHARED_IDE \
	BOOTENV_SHARED_UBIFS \
	BOOTENV_SHARED_EFI \
	BOOTENV_SHARED_VIRTIO \
	"boot_prefixes=/ /boot/\0" \
	"boot_scripts=boot.scr.uimg boot.scr\0" \
	"boot_script_dhcp=boot.scr.uimg\0" \
	BOOTENV_BOOT_TARGETS \
	\
	"boot_syslinux_conf=extlinux/extlinux.conf\0" \
	"boot_extlinux="                                                  \
		"sysboot ${devtype} ${devnum}:${distro_bootpart} any "    \
			"${scriptaddr} ${prefix}${boot_syslinux_conf}\0"  \
	\
	"scan_dev_for_extlinux="                                          \
		"if test -e ${devtype} "                                  \
				"${devnum}:${distro_bootpart} "           \
				"${prefix}${boot_syslinux_conf}; then "   \
			"echo Found ${prefix}${boot_syslinux_conf}; "     \
			"run boot_extlinux; "                             \
			"echo SCRIPT FAILED: continuing...; "             \
		"fi\0"                                                    \
	\
	"boot_a_script="                                                  \
		"load ${devtype} ${devnum}:${distro_bootpart} "           \
			"${scriptaddr} ${prefix}${script}; "              \
		"source ${scriptaddr}\0"                                  \
	\
	"scan_dev_for_scripts="                                           \
		"for script in ${boot_scripts}; do "                      \
			"if test -e ${devtype} "                          \
					"${devnum}:${distro_bootpart} "   \
					"${prefix}${script}; then "       \
				"echo Found U-Boot script "               \
					"${prefix}${script}; "            \
				"run boot_a_script; "                     \
				"echo SCRIPT FAILED: continuing...; "     \
			"fi; "                                            \
		"done\0"                                                  \
	\
	"scan_dev_for_boot="                                              \
		"echo Scanning ${devtype} "                               \
				"${devnum}:${distro_bootpart}...; "       \
		"for prefix in ${boot_prefixes}; do "                     \
			"run scan_dev_for_extlinux; "                     \
			"run scan_dev_for_scripts; "                      \
		"done;"                                                   \
		SCAN_DEV_FOR_EFI                                          \
		"\0"                                                      \
	\
	"scan_dev_for_boot_part="                                         \
		"part list ${devtype} ${devnum} -bootable devplist; "     \
		"env exists devplist || setenv devplist 1; "              \
		"for distro_bootpart in ${devplist}; do "                 \
			"if fstype ${devtype} "                           \
					"${devnum}:${distro_bootpart} "   \
					"bootfstype; then "               \
				"run scan_dev_for_boot; "                 \
			"fi; "                                            \
		"done; "                                                  \
		"setenv devplist\0"					  \
	\
	BOOT_TARGET_DEVICES(BOOTENV_DEV)                                  \
	\
	"distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT                      \
		BOOTENV_SET_NVME_NEED_INIT                                \
		BOOTENV_SET_IDE_NEED_INIT                                 \
		BOOTENV_SET_VIRTIO_NEED_INIT                              \
		"for target in ${boot_targets}; do "                      \
			"run bootcmd_${target}; "                         \
		"done\0"

#ifndef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
#endif

#endif  /* _CONFIG_CMD_DISTRO_BOOTCMD_H */