Eric Lee / smarc-uboot

skge.c 133 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 
/******************************************************************************
 *
 * Name:    skge.c
 * Project:	GEnesis, PCI Gigabit Ethernet Adapter
 * Version:	$Revision: 1.46 $
 * Date:       	$Date: 2003/02/25 14:16:36 $
 * Purpose:	The main driver source module
 *
 ******************************************************************************/

/******************************************************************************
 *
 *	(C)Copyright 1998-2003 SysKonnect GmbH.
 *
 *	Driver for SysKonnect Gigabit Ethernet Server Adapters:
 *
 *	SK-9871 (single link 1000Base-ZX)
 *	SK-9872 (dual link   1000Base-ZX)
 *	SK-9861 (single link 1000Base-SX, VF45 Volition Plug)
 *	SK-9862 (dual link   1000Base-SX, VF45 Volition Plug)
 *	SK-9841 (single link 1000Base-LX)
 *	SK-9842 (dual link   1000Base-LX)
 *	SK-9843 (single link 1000Base-SX)
 *	SK-9844 (dual link   1000Base-SX)
 *	SK-9821 (single link 1000Base-T)
 *	SK-9822 (dual link   1000Base-T)
 *	SK-9881 (single link 1000Base-SX V2 LC)
 *	SK-9871 (single link 1000Base-ZX V2)
 *	SK-9861 (single link 1000Base-SX V2, VF45 Volition Plug)
 *	SK-9841 (single link 1000Base-LX V2)
 *	SK-9843 (single link 1000Base-SX V2)
 *	SK-9821 (single link 1000Base-T V2)
 *
 *	Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and
 *	SysKonnects GEnesis Solaris driver
 *	Author: Christoph Goos (cgoos@syskonnect.de)
 *	        Mirko Lindner (mlindner@syskonnect.de)
 *
 *	Address all question to: linux@syskonnect.de
 *
 *	The technical manual for the adapters is available from SysKonnect's
 *	web pages: www.syskonnect.com
 *	Goto "Support" and search Knowledge Base for "manual".
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	The information in this file is provided "AS IS" without warranty.
 *
 ******************************************************************************/

/******************************************************************************
 *
 * History:
 *
 *	$Log: skge.c,v $
 *	Revision 1.46  2003/02/25 14:16:36  mlindner
 *	Fix: Copyright statement
 *
 *	Revision 1.45  2003/02/25 13:25:55  mlindner
 *	Add: Performance improvements
 *	Add: Support for various vendors
 *	Fix: Init function
 *
 *	Revision 1.44  2003/01/09 09:25:26  mlindner
 *	Fix: Remove useless init_module/cleanup_module forward declarations
 *
 *	Revision 1.43  2002/11/29 08:42:41  mlindner
 *	Fix: Boot message
 *
 *	Revision 1.42  2002/11/28 13:30:23  mlindner
 *	Add: New frame check
 *
 *	Revision 1.41  2002/11/27 13:55:18  mlindner
 *	Fix: Drop wrong csum packets
 *	Fix: Initialize proc_entry after hw check
 *
 *	Revision 1.40  2002/10/31 07:50:37  tschilli
 *	Function SkGeInitAssignRamToQueues() from common module inserted.
 *	Autonegotiation is set to ON for all adapters.
 *	LinkSpeedUsed is used in link up status report.
 *	Role parameter will show up for 1000 Mbps links only.
 *	GetConfiguration() inserted after init level 1 in SkGeChangeMtu().
 *	All return values of SkGeInit() and SkGeInitPort() are checked.
 *
 *	Revision 1.39  2002/10/02 12:56:05  mlindner
 *	Add: Support for Yukon
 *	Add: Support for ZEROCOPY, scatter-gather and hw checksum
 *	Add: New transmit ring function (use SG and TCP/UDP hardware checksumming)
 *	Add: New init function
 *	Add: Speed check and setup
 *	Add: Merge source for kernel 2.2.x and 2.4.x
 *	Add: Opcode check for tcp
 *	Add: Frame length check
 *	Fix: Transmit complete interrupt
 *	Fix: Interrupt moderation
 *
 *	Revision 1.29.2.13  2002/01/14 12:44:52  mlindner
 *	Fix: Rlmt modes
 *
 *	Revision 1.29.2.12  2001/12/07 12:06:18  mlindner
 *	Fix: malloc -> slab changes
 *
 *	Revision 1.29.2.11  2001/12/06 15:19:20  mlindner
 *	Add: DMA attributes
 *	Fix: Module initialisation
 *	Fix: pci_map_single and pci_unmap_single replaced
 *
 *	Revision 1.29.2.10  2001/12/06 09:56:50  mlindner
 *	Corrected some printk's
 *
 *	Revision 1.29.2.9  2001/09/05 12:15:34  mlindner
 *	Add: LBFO Changes
 *	Fix: Counter Errors (Jumbo == to long errors)
 *	Fix: Changed pAC->PciDev declaration
 *	Fix: too short counters
 *
 *	Revision 1.29.2.8  2001/06/25 12:10:44  mlindner
 *	fix: ReceiveIrq() changed.
 *
 *	Revision 1.29.2.7  2001/06/25 08:07:05  mlindner
 *	fix: RLMT locking in ReceiveIrq() changed.
 *
 *	Revision 1.29.2.6  2001/05/21 07:59:29  mlindner
 *	fix: MTU init problems
 *
 *	Revision 1.29.2.5  2001/05/08 11:25:08  mlindner
 *	fix: removed VLAN error message
 *
 *	Revision 1.29.2.4  2001/05/04 13:31:43  gklug
 *	fix: do not handle eth_copy on bad fragments received.
 *
 *	Revision 1.29.2.3  2001/04/23 08:06:43  mlindner
 *	Fix: error handling
 *
 *	Revision 1.29.2.2  2001/03/15 12:04:54  mlindner
 *	Fixed memory problem
 *
 *	Revision 1.29.2.1  2001/03/12 16:41:44  mlindner
 *	add: procfs function
 *	add: dual-net function
 *	add: RLMT networks
 *	add: extended PNMI features
 *
 *	Kernel 2.4.x specific:
 *	Revision 1.xx  2000/09/12 13:31:56  cgoos
 *	Fixed missign "dev=NULL in skge_probe.
 *	Added counting for jumbo frames (corrects error statistic).
 *	Removed VLAN tag check (enables VLAN support).
 *
 *	Kernel 2.2.x specific:
 *	Revision 1.29  2000/02/21 13:31:56  cgoos
 *	Fixed "unused" warning for UltraSPARC change.
 *
 *	Partially kernel 2.2.x specific:
 *	Revision 1.28  2000/02/21 10:32:36  cgoos
 *	Added fixes for UltraSPARC.
 *	Now printing RlmtMode and PrefPort setting at startup.
 *	Changed XmitFrame return value.
 *	Fixed rx checksum calculation for BIG ENDIAN systems.
 *	Fixed rx jumbo frames counted as ierrors.
 *
 *
 *	Revision 1.27  1999/11/25 09:06:28  cgoos
 *	Changed base_addr to unsigned long.
 *
 *	Revision 1.26  1999/11/22 13:29:16  cgoos
 *	Changed license header to GPL.
 *	Changes for inclusion in linux kernel (2.2.13).
 *	Removed 2.0.x defines.
 *	Changed SkGeProbe to skge_probe.
 *	Added checks in SkGeIoctl.
 *
 *	Revision 1.25  1999/10/07 14:47:52  cgoos
 *	Changed 984x to 98xx.
 *
 *	Revision 1.24  1999/09/30 07:21:01  cgoos
 *	Removed SK_RLMT_SLOW_LOOKAHEAD option.
 *	Giving spanning tree packets also to OS now.
 *
 *	Revision 1.23  1999/09/29 07:36:50  cgoos
 *	Changed assignment for IsBc/IsMc.
 *
 *	Revision 1.22  1999/09/28 12:57:09  cgoos
 *	Added CheckQueue also to Single-Port-ISR.
 *
 *	Revision 1.21  1999/09/28 12:42:41  cgoos
 *	Changed parameter strings for RlmtMode.
 *
 *	Revision 1.20  1999/09/28 12:37:57  cgoos
 *	Added CheckQueue for fast delivery of RLMT frames.
 *
 *	Revision 1.19  1999/09/16 07:57:25  cgoos
 *	Copperfield changes.
 *
 *	Revision 1.18  1999/09/03 13:06:30  cgoos
 *	Fixed RlmtMode=CheckSeg bug: wrong DEV_KFREE_SKB in RLMT_SEND caused
 *	double allocated skb's.
 *	FrameStat in ReceiveIrq was accessed via wrong Rxd.
 *	Queue size for async. standby Tx queue was zero.
 *	FillRxLimit of 0 could cause problems with ReQueue, changed to 1.
 *	Removed debug output of checksum statistic.
 *
 *	Revision 1.17  1999/08/11 13:55:27  cgoos
 *	Transmit descriptor polling was not reenabled after SkGePortInit.
 *
 *	Revision 1.16  1999/07/27 15:17:29  cgoos
 *	Added some "\n" in output strings (removed while debuging...).
 *
 *	Revision 1.15  1999/07/23 12:09:30  cgoos
 *	Performance optimization, rx checksumming, large frame support.
 *
 *	Revision 1.14  1999/07/14 11:26:27  cgoos
 *	Removed Link LED settings (now in RLMT).
 *	Added status output at NET UP.
 *	Fixed SMP problems with Tx and SWITCH running in parallel.
 *	Fixed return code problem at RLMT_SEND event.
 *
 *	Revision 1.13  1999/04/07 10:11:42  cgoos
 *	Fixed Single Port problems.
 *	Fixed Multi-Adapter problems.
 *	Always display startup string.
 *
 *	Revision 1.12  1999/03/29 12:26:37  cgoos
 *	Reversed locking to fine granularity.
 *	Fixed skb double alloc problem (caused by incorrect xmit return code).
 *	Enhanced function descriptions.
 *
 *	Revision 1.11  1999/03/15 13:10:51  cgoos
 *	Changed device identifier in output string to ethX.
 *
 *	Revision 1.10  1999/03/15 12:12:34  cgoos
 *	Changed copyright notice.
 *
 *	Revision 1.9  1999/03/15 12:10:17  cgoos
 *	Changed locking to one driver lock.
 *	Added check of SK_AC-size (for consistency with library).
 *
 *	Revision 1.8  1999/03/08 11:44:02  cgoos
 *	Fixed missing dev->tbusy in SkGeXmit.
 *	Changed large frame (jumbo) buffer number.
 *	Added copying of short frames.
 *
 *	Revision 1.7  1999/03/04 13:26:57  cgoos
 *	Fixed spinlock calls for SMP.
 *
 *	Revision 1.6  1999/03/02 09:53:51  cgoos
 *	Added descriptor revertion for big endian machines.
 *
 *	Revision 1.5  1999/03/01 08:50:59  cgoos
 *	Fixed SkGeChangeMtu.
 *	Fixed pci config space accesses.
 *
 *	Revision 1.4  1999/02/18 15:48:44  cgoos
 *	Corrected some printk's.
 *
 *	Revision 1.3  1999/02/18 12:45:55  cgoos
 *	Changed SK_MAX_CARD_PARAM to default 16
 *
 *	Revision 1.2  1999/02/18 10:55:32  cgoos
 *	Removed SkGeDrvTimeStamp function.
 *	Printing "ethX:" before adapter type at adapter init.
 *
 *
 *	10-Feb-1999 cg	Created, based on Linux' acenic.c, 3c59x.c and
 *			SysKonnects GEnesis Solaris driver
 *
 ******************************************************************************/

/******************************************************************************
 *
 * Possible compiler options (#define xxx / -Dxxx):
 *
 *	debugging can be enable by changing SK_DEBUG_CHKMOD and
 *	SK_DEBUG_CHKCAT in makefile (described there).
 *
 ******************************************************************************/

/******************************************************************************
 *
 * Description:
 *
 *	This is the main module of the Linux GE driver.
 *
 *	All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h
 *	are part of SysKonnect's COMMON MODULES for the SK-98xx adapters.
 *	Those are used for drivers on multiple OS', so some thing may seem
 *	unnecessary complicated on Linux. Please do not try to 'clean up'
 *	them without VERY good reasons, because this will make it more
 *	difficult to keep the Linux driver in synchronisation with the
 *	other versions.
 *
 * Include file hierarchy:
 *
 *	<linux/module.h>
 *
 *	"h/skdrv1st.h"
 *		<linux/version.h>
 *		<linux/types.h>
 *		<linux/kernel.h>
 *		<linux/string.h>
 *		<linux/errno.h>
 *		<linux/ioport.h>
 *		<linux/slab.h>
 *		<linux/interrupt.h>
 *		<linux/pci.h>
 *		<asm/byteorder.h>
 *		<asm/bitops.h>
 *		<asm/io.h>
 *		<linux/netdevice.h>
 *		<linux/etherdevice.h>
 *		<linux/skbuff.h>
 *	    those three depending on kernel version used:
 *		<linux/bios32.h>
 *		<linux/init.h>
 *		<asm/uaccess.h>
 *		<net/checksum.h>
 *
 *		"h/skerror.h"
 *		"h/skdebug.h"
 *		"h/sktypes.h"
 *		"h/lm80.h"
 *		"h/xmac_ii.h"
 *
 *      "h/skdrv2nd.h"
 *		"h/skqueue.h"
 *		"h/skgehwt.h"
 *		"h/sktimer.h"
 *		"h/ski2c.h"
 *		"h/skgepnmi.h"
 *		"h/skvpd.h"
 *		"h/skgehw.h"
 *		"h/skgeinit.h"
 *		"h/skaddr.h"
 *		"h/skgesirq.h"
 *		"h/skcsum.h"
 *		"h/skrlmt.h"
 *
 ******************************************************************************/

#include <config.h>

#ifdef CONFIG_SK98

#include	"h/skversion.h"
#if 0
#include	<linux/module.h>
#include	<linux/init.h>
#include 	<linux/proc_fs.h>
#endif
#include	"h/skdrv1st.h"
#include	"h/skdrv2nd.h"


/* defines ******************************************************************/
/* for debuging on x86 only */
/* #define BREAKPOINT() asm(" int $3"); */

/* use the scatter-gather functionality with sendfile() */
#if 0
#define SK_ZEROCOPY
#endif

/* use of a transmit complete interrupt */
#define USE_TX_COMPLETE

/* use interrupt moderation (for tx complete only) */
#define USE_INT_MOD
#define INTS_PER_SEC	1000

/*
 * threshold for copying small receive frames
 * set to 0 to avoid copying, set to 9001 to copy all frames
 */
#define SK_COPY_THRESHOLD	50

/* number of adapters that can be configured via command line params */
#define SK_MAX_CARD_PARAM	16


/*
 * use those defines for a compile-in version of the driver instead
 * of command line parameters
 */
/* #define LINK_SPEED_A	{"Auto", }		*/
/* #define LINK_SPEED_B	{"Auto", }		*/
/* #define AUTO_NEG_A	{"Sense", }		*/
/* #define AUTO_NEG_B	{"Sense", }		*/
/* #define DUP_CAP_A	{"Both", }		*/
/* #define DUP_CAP_B	{"Both", }		*/
/* #define FLOW_CTRL_A	{"SymOrRem", }		*/
/* #define FLOW_CTRL_B	{"SymOrRem", }		*/
/* #define ROLE_A	{"Auto", }		*/
/* #define ROLE_B	{"Auto", }		*/
/* #define PREF_PORT	{"A", }			*/
/* #define RLMT_MODE	{"CheckLinkState", }	*/

#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb)
#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb)
#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb)

/* function prototypes ******************************************************/
static void	FreeResources(struct SK_NET_DEVICE *dev);
static int	SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC);
static SK_BOOL	BoardAllocMem(SK_AC *pAC);
static void	BoardFreeMem(SK_AC *pAC);
static void	BoardInitMem(SK_AC *pAC);
static void	SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**,
			int*, SK_BOOL);

#if 0
static void	SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs);
static void	SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs);
static int	SkGeOpen(struct SK_NET_DEVICE *dev);
static int	SkGeClose(struct SK_NET_DEVICE *dev);
static int	SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev);
static int	SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p);
static void	SkGeSetRxMode(struct SK_NET_DEVICE *dev);
static struct	net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
static int	SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
#else
void	SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs);
void	SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs);
int	SkGeOpen(struct SK_NET_DEVICE *dev);
int	SkGeClose(struct SK_NET_DEVICE *dev);
int	SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev);
#endif
static void	GetConfiguration(SK_AC*);
static void	ProductStr(SK_AC*);
static int	XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
static void	FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
static void	FillRxRing(SK_AC*, RX_PORT*);
static SK_BOOL	FillRxDescriptor(SK_AC*, RX_PORT*);
#if 0
static void	ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL);
#else
void	ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL);
#endif
static void ClearAndStartRx(SK_AC*, int);
static void	ClearTxIrq(SK_AC*, int, int);
static void	ClearRxRing(SK_AC*, RX_PORT*);
static void	ClearTxRing(SK_AC*, TX_PORT*);
#if 0
static void	SetQueueSizes(SK_AC	*pAC);

static int	SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu);
#endif
static void	PortReInitBmu(SK_AC*, int);
#if 0
static int	SkGeIocMib(DEV_NET*, unsigned int, int);
static int	XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*);
#endif

/*Extern */

/* external Proc function */
extern int proc_read(
	char	*buffer,
	char	**buffer_location,
	off_t	offset,
	int		buffer_length,
	int		*eof,
	void	*data);

#ifdef DEBUG
static void	DumpMsg(struct sk_buff*, char*);
static void	DumpData(char*, int);
static void	DumpLong(char*, int);
#endif
void dump_frag( SK_U8 *data, int length);

/* global variables *********************************************************/
#if 0
static const char *BootString = BOOT_STRING;
#endif
struct SK_NET_DEVICE *SkGeRootDev = NULL;
static int probed __initdata = 0;

/* local variables **********************************************************/
static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}};
static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};


/* local variables **********************************************************/
const char SK_Root_Dir_entry[8];

#if 0
static struct proc_dir_entry	*pSkRootDir;
#endif


static struct pci_device_id supported[] = {
	{PCI_VENDOR_ID_3COM, 0x1700},
	{PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE},
	{PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU},
	{}
};


/*****************************************************************************
 *
 * 	skge_probe - find all SK-98xx adapters
 *
 * Description:
 *	This function scans the PCI bus for SK-98xx adapters. Resources for
 *	each adapter are allocated and the adapter is brought into Init 1
 *	state.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
#if 0
static int __init skge_probe (void)
#else
int skge_probe (struct eth_device ** ret_dev)
#endif
{
#if 0
	int			proc_root_initialized = 0;
#endif
	int			boards_found = 0;
#if 0
	int			vendor_flag = SK_FALSE;
#endif
	SK_AC			*pAC;
	DEV_NET			*pNet = NULL;
#if 0
	struct proc_dir_entry	*pProcFile;
	struct pci_dev	*pdev = NULL;
	unsigned long		base_address;
#else
	u32			base_address;
#endif
	struct SK_NET_DEVICE *dev = NULL;
#if 0
	SK_BOOL DeviceFound = SK_FALSE;
#endif
	SK_BOOL BootStringCount = SK_FALSE;
#if 1
	pci_dev_t devno;
#endif

	if (probed)
		return -ENODEV;
	probed++;

	if (!pci_present())		/* is PCI support present? */
		return -ENODEV;

#if 0
		while((pdev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET << 8, pdev)))
#else
		while((devno = pci_find_devices (supported, boards_found)) >= 0)
#endif
		{

		dev = NULL;
		pNet = NULL;


#if 0
		SK_PCI_ISCOMPLIANT(vendor_flag, pdev);
		if (!vendor_flag)
			continue;
#endif

/*		if ((pdev->vendor != PCI_VENDOR_ID_SYSKONNECT) &&
			((pdev->device != PCI_DEVICE_ID_SYSKONNECT_GE) ||
			(pdev->device != PCI_DEVICE_ID_SYSKONNECT_YU))){
			continue;
		}
*/
#if 0
		/* Configure DMA attributes. */
		if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffff) &&
			pci_set_dma_mask(pdev, (u64) 0xffffffff))
			continue;
#endif


#if 0
		if ((dev = init_etherdev(dev, sizeof(DEV_NET))) == NULL) {
			printk(KERN_ERR "Unable to allocate etherdev "
			       "structure!\n");
			break;
		}
#else
		dev = malloc (sizeof *dev);
		memset(dev, 0, sizeof(*dev));
		dev->priv = malloc(sizeof(DEV_NET));
#endif

		if (dev->priv == NULL) {
			printk(KERN_ERR "Unable to allocate adapter "
			       "structure!\n");
			break;
		}

		pNet = dev->priv;
		pNet->pAC = kmalloc(sizeof(SK_AC), GFP_KERNEL);
		if (pNet->pAC == NULL){
			kfree(dev->priv);
			printk(KERN_ERR "Unable to allocate adapter "
			       "structure!\n");
			break;
		}

		/* Print message */
		if (!BootStringCount) {
			/* set display flag to TRUE so that */
			/* we only display this string ONCE */
			BootStringCount = SK_TRUE;
#ifdef SK98_INFO
			printk("%s\n", BootString);
#endif
		}

		memset(pNet->pAC, 0, sizeof(SK_AC));
		pAC = pNet->pAC;
#if 0
		pAC->PciDev = pdev;
		pAC->PciDevId = pdev->device;
		pAC->dev[0] = dev;
		pAC->dev[1] = dev;
#else
		pAC->PciDev = devno;
		ret_dev[0] = pAC->dev[0] = dev;
		ret_dev[1] = pAC->dev[1] = dev;
#endif
		sprintf(pAC->Name, "SysKonnect SK-98xx");
		pAC->CheckQueue = SK_FALSE;

		pNet->Mtu = 1500;
		pNet->Up = 0;
#if 0
		dev->irq = pdev->irq;

		dev->open =		&SkGeOpen;
		dev->stop =		&SkGeClose;
		dev->hard_start_xmit =	&SkGeXmit;
		dev->get_stats =	&SkGeStats;
		dev->set_multicast_list = &SkGeSetRxMode;
		dev->set_mac_address =	&SkGeSetMacAddr;
		dev->do_ioctl =		&SkGeIoctl;
		dev->change_mtu =	&SkGeChangeMtu;
		dev->flags &= 		~IFF_RUNNING;
#endif

#ifdef SK_ZEROCOPY
		if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
			/* Use only if yukon hardware */
			/* SK and ZEROCOPY - fly baby... */
			dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
		}
#endif

#if 0
		/*
		 * Dummy value.
		 */
		dev->base_addr = 42;
		pci_set_master(pdev);

		pci_set_master(pdev);
		base_address = pci_resource_start (pdev, 0);
#else
		pci_write_config_dword(devno,
				       PCI_COMMAND,
				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
		pci_read_config_dword (devno, PCI_BASE_ADDRESS_0,
				       &base_address);
#endif

#ifdef SK_BIG_ENDIAN
		/*
		 * On big endian machines, we use the adapter's aibility of
		 * reading the descriptors as big endian.
		 */
		{
		SK_U32		our2;
			SkPciReadCfgDWord(pAC, PCI_OUR_REG_2, &our2);
			our2 |= PCI_REV_DESC;
			SkPciWriteCfgDWord(pAC, PCI_OUR_REG_2, our2);
		}
#endif

		/*
		 * Remap the regs into kernel space.
		 */
#if 0
		pAC->IoBase = (char*)ioremap(base_address, 0x4000);
#else
		pAC->IoBase = (char*)pci_mem_to_phys(devno, base_address);
#endif

		if (!pAC->IoBase){
			printk(KERN_ERR "%s:  Unable to map I/O register, "
			       "SK 98xx No. %i will be disabled.\n",
			       dev->name, boards_found);
			kfree(dev);
			break;
		}

		pAC->Index = boards_found;
		if (SkGeBoardInit(dev, pAC)) {
			FreeResources(dev);
			kfree(dev);
			continue;
		}

#if 0
		memcpy((caddr_t) &dev->dev_addr,
			(caddr_t) &pAC->Addr.Net[0].CurrentMacAddress, 6);
#else
		memcpy((caddr_t) &dev->enetaddr,
			(caddr_t) &pAC->Addr.Net[0].CurrentMacAddress, 6);
#endif

#if 0
		/* First adapter... Create proc and print message */
		if (!DeviceFound) {
			DeviceFound = SK_TRUE;
			SK_MEMCPY(&SK_Root_Dir_entry, BootString,
				sizeof(SK_Root_Dir_entry) - 1);

			/*Create proc (directory)*/
			if(!proc_root_initialized) {
				pSkRootDir = create_proc_entry(SK_Root_Dir_entry,
					S_IFDIR | S_IWUSR | S_IRUGO | S_IXUGO, proc_net);
				proc_root_initialized = 1;
			}

			pSkRootDir->owner = THIS_MODULE;
		}


		/* Create proc file */
		pProcFile = create_proc_entry(dev->name,
			S_IFREG | S_IXUSR | S_IWGRP | S_IROTH,
			pSkRootDir);


		pProcFile->read_proc = proc_read;
		pProcFile->write_proc = NULL;
		pProcFile->nlink = 1;
		pProcFile->size = sizeof(dev->name + 1);
		pProcFile->data = (void *)pProcFile;
#endif

		pNet->PortNr = 0;
		pNet->NetNr = 0;

#ifdef SK_ZEROCOPY
			if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
				/* SG and ZEROCOPY - fly baby... */
				dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
			}
#endif

		boards_found++;

		/* More then one port found */
		if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
#if 0
			if ((dev = init_etherdev(NULL, sizeof(DEV_NET))) == 0) {
				printk(KERN_ERR "Unable to allocate etherdev "
					"structure!\n");
				break;
			}
#else
			dev = malloc (sizeof *dev);
			memset(dev, 0, sizeof(*dev));
			dev->priv = malloc(sizeof(DEV_NET));
#endif

			pAC->dev[1] = dev;
			pNet = dev->priv;
			pNet->PortNr = 1;
			pNet->NetNr = 1;
			pNet->pAC = pAC;
			pNet->Mtu = 1500;
			pNet->Up = 0;

#if 0
			dev->open =		&SkGeOpen;
			dev->stop =		&SkGeClose;
			dev->hard_start_xmit =	&SkGeXmit;
			dev->get_stats =	&SkGeStats;
			dev->set_multicast_list = &SkGeSetRxMode;
			dev->set_mac_address =	&SkGeSetMacAddr;
			dev->do_ioctl =		&SkGeIoctl;
			dev->change_mtu =	&SkGeChangeMtu;
			dev->flags &= 		~IFF_RUNNING;
#endif

#ifdef SK_ZEROCOPY
			if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
				/* SG and ZEROCOPY - fly baby... */
				dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
			}
#endif

#if 0
			pProcFile = create_proc_entry(dev->name,
				S_IFREG | S_IXUSR | S_IWGRP | S_IROTH,
				pSkRootDir);


			pProcFile->read_proc = proc_read;
			pProcFile->write_proc = NULL;
			pProcFile->nlink = 1;
			pProcFile->size = sizeof(dev->name + 1);
			pProcFile->data = (void *)pProcFile;
#endif

#if 0
			memcpy((caddr_t) &dev->dev_addr,
			(caddr_t) &pAC->Addr.Net[1].CurrentMacAddress, 6);
#else
			memcpy((caddr_t) &dev->enetaddr,
			(caddr_t) &pAC->Addr.Net[1].CurrentMacAddress, 6);
#endif

			printk("%s: %s\n", dev->name, pAC->DeviceStr);
			printk("      PrefPort:B  RlmtMode:Dual Check Link State\n");

		}


		/* Save the hardware revision */
		pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
			(pAC->GIni.GIPciHwRev & 0x0F);

		/*
		 * This is bollocks, but we need to tell the net-init
		 * code that it shall go for the next device.
		 */
#if 0
#ifndef MODULE
		dev->base_addr = 0;
#endif
#endif
	}

	/*
	 * If we're at this point we're going through skge_probe() for
	 * the first time.  Return success (0) if we've initialized 1
	 * or more boards. Otherwise, return failure (-ENODEV).
	 */

	return boards_found;
} /* skge_probe */


/*****************************************************************************
 *
 * 	FreeResources - release resources allocated for adapter
 *
 * Description:
 *	This function releases the IRQ, unmaps the IO and
 *	frees the desriptor ring.
 *
 * Returns: N/A
 *
 */
static void FreeResources(struct SK_NET_DEVICE *dev)
{
SK_U32 AllocFlag;
DEV_NET		*pNet;
SK_AC		*pAC;

	if (dev->priv) {
		pNet = (DEV_NET*) dev->priv;
		pAC = pNet->pAC;
		AllocFlag = pAC->AllocFlag;
#if 0
		if (AllocFlag & SK_ALLOC_IRQ) {
			free_irq(dev->irq, dev);
		}
		if (pAC->IoBase) {
			iounmap(pAC->IoBase);
		}
#endif
		if (pAC->pDescrMem) {
			BoardFreeMem(pAC);
		}
	}

} /* FreeResources */

#if 0
MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver");
MODULE_LICENSE("GPL");
MODULE_PARM(Speed_A,    "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(Speed_B,    "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(AutoNeg_A,  "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(AutoNeg_B,  "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(DupCap_A,   "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(DupCap_B,   "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(FlowCtrl_A, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(FlowCtrl_B, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(Role_A,	    "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(Role_B,	    "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(PrefPort,   "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
MODULE_PARM(RlmtMode,   "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s");
/* not used, just there because every driver should have them: */
MODULE_PARM(options,    "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "i");
MODULE_PARM(debug,      "i");
#endif


#ifdef LINK_SPEED_A
static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED_A;
#else
static char *Speed_A[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef LINK_SPEED_B
static char *Speed_B[SK_MAX_CARD_PARAM] = LINK_SPEED_B;
#else
static char *Speed_B[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef AUTO_NEG_A
static char *AutoNeg_A[SK_MAX_CARD_PARAM] = AUTO_NEG_A;
#else
static char *AutoNeg_A[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef DUP_CAP_A
static char *DupCap_A[SK_MAX_CARD_PARAM] = DUP_CAP_A;
#else
static char *DupCap_A[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef FLOW_CTRL_A
static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = FLOW_CTRL_A;
#else
static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef ROLE_A
static char *Role_A[SK_MAX_CARD_PARAM] = ROLE_A;
#else
static char *Role_A[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef AUTO_NEG_B
static char *AutoNeg_B[SK_MAX_CARD_PARAM] = AUTO_NEG_B;
#else
static char *AutoNeg_B[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef DUP_CAP_B
static char *DupCap_B[SK_MAX_CARD_PARAM] = DUP_CAP_B;
#else
static char *DupCap_B[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef FLOW_CTRL_B
static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = FLOW_CTRL_B;
#else
static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef ROLE_B
static char *Role_B[SK_MAX_CARD_PARAM] = ROLE_B;
#else
static char *Role_B[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef PREF_PORT
static char *PrefPort[SK_MAX_CARD_PARAM] = PREF_PORT;
#else
static char *PrefPort[SK_MAX_CARD_PARAM] = {"", };
#endif

#ifdef RLMT_MODE
static char *RlmtMode[SK_MAX_CARD_PARAM] = RLMT_MODE;
#else
static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", };
#endif

#if 0
static int debug = 0; /* not used */
static int options[SK_MAX_CARD_PARAM] = {0, }; /* not used */


/*****************************************************************************
 *
 * 	skge_init_module - module initialization function
 *
 * Description:
 *	Very simple, only call skge_probe and return approriate result.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
static int __init skge_init_module(void)
{
	int cards;
	SkGeRootDev = NULL;

	/* just to avoid warnings ... */
	debug = 0;
	options[0] = 0;

	cards = skge_probe();
	if (cards == 0) {
		printk("sk98lin: No adapter found.\n");
	}
	return cards ? 0 : -ENODEV;
} /* skge_init_module */


/*****************************************************************************
 *
 * 	skge_cleanup_module - module unload function
 *
 * Description:
 *	Disable adapter if it is still running, free resources,
 *	free device struct.
 *
 * Returns: N/A
 */
static void __exit skge_cleanup_module(void)
{
DEV_NET		*pNet;
SK_AC		*pAC;
struct SK_NET_DEVICE *next;
unsigned long Flags;
SK_EVPARA EvPara;

	while (SkGeRootDev) {
		pNet = (DEV_NET*) SkGeRootDev->priv;
		pAC = pNet->pAC;
		next = pAC->Next;

		netif_stop_queue(SkGeRootDev);
		SkGeYellowLED(pAC, pAC->IoBase, 0);

		if(pAC->BoardLevel == 2) {
			/* board is still alive */
			spin_lock_irqsave(&pAC->SlowPathLock, Flags);
			EvPara.Para32[0] = 0;
			EvPara.Para32[1] = -1;
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
			EvPara.Para32[0] = 1;
			EvPara.Para32[1] = -1;
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
			SkEventDispatcher(pAC, pAC->IoBase);
			/* disable interrupts */
			SK_OUT32(pAC->IoBase, B0_IMSK, 0);
			SkGeDeInit(pAC, pAC->IoBase);
			spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
			pAC->BoardLevel = 0;
			/* We do NOT check here, if IRQ was pending, of course*/
		}

		if(pAC->BoardLevel == 1) {
			/* board is still alive */
			SkGeDeInit(pAC, pAC->IoBase);
			pAC->BoardLevel = 0;
		}

		if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 2){
			unregister_netdev(pAC->dev[1]);
			kfree(pAC->dev[1]);
		}

		FreeResources(SkGeRootDev);

		SkGeRootDev->get_stats = NULL;
		/*
		 * otherwise unregister_netdev calls get_stats with
		 * invalid IO ...  :-(
		 */
		unregister_netdev(SkGeRootDev);
		kfree(SkGeRootDev);
		kfree(pAC);
		SkGeRootDev = next;
	}

	/* clear proc-dir */
	remove_proc_entry(pSkRootDir->name, proc_net);

} /* skge_cleanup_module */

module_init(skge_init_module);
module_exit(skge_cleanup_module);
#endif


/*****************************************************************************
 *
 * 	SkGeBoardInit - do level 0 and 1 initialization
 *
 * Description:
 *	This function prepares the board hardware for running. The desriptor
 *	ring is set up, the IRQ is allocated and the configuration settings
 *	are examined.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
static int __init SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
{
short	i;
unsigned long Flags;
char	*DescrString = "sk98lin: Driver for Linux"; /* this is given to PNMI */
char	*VerStr	= VER_STRING;
#if 0
int	Ret;			/* return code of request_irq */
#endif
SK_BOOL	DualNet;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("IoBase: %08lX\n", (unsigned long)pAC->IoBase));
	for (i=0; i<SK_MAX_MACS; i++) {
		pAC->TxPort[i][0].HwAddr = pAC->IoBase + TxQueueAddr[i][0];
		pAC->TxPort[i][0].PortIndex = i;
		pAC->RxPort[i].HwAddr = pAC->IoBase + RxQueueAddr[i];
		pAC->RxPort[i].PortIndex = i;
	}

	/* Initialize the mutexes */
	for (i=0; i<SK_MAX_MACS; i++) {
		spin_lock_init(&pAC->TxPort[i][0].TxDesRingLock);
		spin_lock_init(&pAC->RxPort[i].RxDesRingLock);
	}
	spin_lock_init(&pAC->SlowPathLock);

	/* level 0 init common modules here */

	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
	/* Does a RESET on board ...*/
	if (SkGeInit(pAC, pAC->IoBase, 0) != 0) {
		printk("HWInit (0) failed.\n");
		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
		return(-EAGAIN);
	}
	SkI2cInit(  pAC, pAC->IoBase, 0);
	SkEventInit(pAC, pAC->IoBase, 0);
	SkPnmiInit( pAC, pAC->IoBase, 0);
	SkAddrInit( pAC, pAC->IoBase, 0);
	SkRlmtInit( pAC, pAC->IoBase, 0);
	SkTimerInit(pAC, pAC->IoBase, 0);

	pAC->BoardLevel = 0;
	pAC->RxBufSize = ETH_BUF_SIZE;

	SK_PNMI_SET_DRIVER_DESCR(pAC, DescrString);
	SK_PNMI_SET_DRIVER_VER(pAC, VerStr);

	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);

	/* level 1 init common modules here (HW init) */
	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
	if (SkGeInit(pAC, pAC->IoBase, 1) != 0) {
		printk("HWInit (1) failed.\n");
		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
		return(-EAGAIN);
	}
	SkI2cInit(  pAC, pAC->IoBase, 1);
	SkEventInit(pAC, pAC->IoBase, 1);
	SkPnmiInit( pAC, pAC->IoBase, 1);
	SkAddrInit( pAC, pAC->IoBase, 1);
	SkRlmtInit( pAC, pAC->IoBase, 1);
	SkTimerInit(pAC, pAC->IoBase, 1);

	GetConfiguration(pAC);
	if (pAC->RlmtNets == 2) {
		pAC->GIni.GIPortUsage = SK_MUL_LINK;
	}

	pAC->BoardLevel = 1;
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);

#if 0
	if (pAC->GIni.GIMacsFound == 2) {
		 Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
	} else if (pAC->GIni.GIMacsFound == 1) {
		Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ,
			pAC->Name, dev);
	} else {
		printk(KERN_WARNING "%s: Illegal number of ports: %d\n",
		       dev->name, pAC->GIni.GIMacsFound);
		return -EAGAIN;
	}

	if (Ret) {
		printk(KERN_WARNING "%s: Requested IRQ %d is busy.\n",
		       dev->name, dev->irq);
		return -EAGAIN;
	}
#endif
	pAC->AllocFlag |= SK_ALLOC_IRQ;

	/* Alloc memory for this board (Mem for RxD/TxD) : */
	if(!BoardAllocMem(pAC)) {
		printk("No memory for descriptor rings.\n");
		return(-EAGAIN);
	}

	SkCsSetReceiveFlags(pAC,
		SKCS_PROTO_IP | SKCS_PROTO_TCP | SKCS_PROTO_UDP,
		&pAC->CsOfs1, &pAC->CsOfs2, 0);
	pAC->CsOfs = (pAC->CsOfs2 << 16) | pAC->CsOfs1;

	BoardInitMem(pAC);
#if 0
	SetQueueSizes(pAC);
#else
	/* tschilling: New common function with minimum size check. */
	DualNet = SK_FALSE;
	if (pAC->RlmtNets == 2) {
		DualNet = SK_TRUE;
	}

	if (SkGeInitAssignRamToQueues(
		pAC,
		pAC->ActivePort,
		DualNet)) {
		BoardFreeMem(pAC);
		printk("SkGeInitAssignRamToQueues failed.\n");
		return(-EAGAIN);
	}
#endif

	/* Print adapter specific string from vpd */
	ProductStr(pAC);
#ifdef SK98_INFO
	printk("%s: %s\n", dev->name, pAC->DeviceStr);

	/* Print configuration settings */
	printk("      PrefPort:%c  RlmtMode:%s\n",
		'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber,
		(pAC->RlmtMode==0)  ? "Check Link State" :
		((pAC->RlmtMode==1) ? "Check Link State" :
		((pAC->RlmtMode==3) ? "Check Local Port" :
		((pAC->RlmtMode==7) ? "Check Segmentation" :
		((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error")))));
#endif

	SkGeYellowLED(pAC, pAC->IoBase, 1);

	/*
	 * Register the device here
	 */
	pAC->Next = SkGeRootDev;
	SkGeRootDev = dev;

	return (0);
} /* SkGeBoardInit */


/*****************************************************************************
 *
 * 	BoardAllocMem - allocate the memory for the descriptor rings
 *
 * Description:
 *	This function allocates the memory for all descriptor rings.
 *	Each ring is aligned for the desriptor alignment and no ring
 *	has a 4 GByte boundary in it (because the upper 32 bit must
 *	be constant for all descriptiors in one rings).
 *
 * Returns:
 *	SK_TRUE, if all memory could be allocated
 *	SK_FALSE, if not
 */
static SK_BOOL BoardAllocMem(
SK_AC	*pAC)
{
caddr_t		pDescrMem;	/* pointer to descriptor memory area */
size_t		AllocLength;	/* length of complete descriptor area */
int		i;		/* loop counter */
unsigned long	BusAddr;


	/* rings plus one for alignment (do not cross 4 GB boundary) */
	/* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */
#if (BITS_PER_LONG == 32)
	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
#else
	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
		+ RX_RING_SIZE + 8;
#endif

	pDescrMem = pci_alloc_consistent(pAC->PciDev, AllocLength,
					 &pAC->pDescrMemDMA);

	if (pDescrMem == NULL) {
		return (SK_FALSE);
	}
	pAC->pDescrMem = pDescrMem;
	BusAddr = (unsigned long) pAC->pDescrMemDMA;

	/* Descriptors need 8 byte alignment, and this is ensured
	 * by pci_alloc_consistent.
	 */
	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
			("TX%d/A: pDescrMem: %lX,   PhysDescrMem: %lX\n",
			i, (unsigned long) pDescrMem,
			BusAddr));
		pAC->TxPort[i][0].pTxDescrRing = pDescrMem;
		pAC->TxPort[i][0].VTxDescrRing = BusAddr;
		pDescrMem += TX_RING_SIZE;
		BusAddr += TX_RING_SIZE;

		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
			("RX%d: pDescrMem: %lX,   PhysDescrMem: %lX\n",
			i, (unsigned long) pDescrMem,
			(unsigned long)BusAddr));
		pAC->RxPort[i].pRxDescrRing = pDescrMem;
		pAC->RxPort[i].VRxDescrRing = BusAddr;
		pDescrMem += RX_RING_SIZE;
		BusAddr += RX_RING_SIZE;
	} /* for */

	return (SK_TRUE);
} /* BoardAllocMem */


/****************************************************************************
 *
 *	BoardFreeMem - reverse of BoardAllocMem
 *
 * Description:
 *	Free all memory allocated in BoardAllocMem: adapter context,
 *	descriptor rings, locks.
 *
 * Returns:	N/A
 */
static void BoardFreeMem(
SK_AC		*pAC)
{
size_t		AllocLength;	/* length of complete descriptor area */

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("BoardFreeMem\n"));
#if (BITS_PER_LONG == 32)
	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
#else
	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
		+ RX_RING_SIZE + 8;
#endif

	pci_free_consistent(pAC->PciDev, AllocLength,
			    pAC->pDescrMem, pAC->pDescrMemDMA);
	pAC->pDescrMem = NULL;
} /* BoardFreeMem */


/*****************************************************************************
 *
 * 	BoardInitMem - initiate the descriptor rings
 *
 * Description:
 *	This function sets the descriptor rings up in memory.
 *	The adapter is initialized with the descriptor start addresses.
 *
 * Returns:	N/A
 */
static void BoardInitMem(
SK_AC	*pAC)	/* pointer to adapter context */
{
int	i;		/* loop counter */
int	RxDescrSize;	/* the size of a rx descriptor rounded up to alignment*/
int	TxDescrSize;	/* the size of a tx descriptor rounded up to alignment*/

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("BoardInitMem\n"));

	RxDescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
	pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize;
	TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
	pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize;

	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		SetupRing(
			pAC,
			pAC->TxPort[i][0].pTxDescrRing,
			pAC->TxPort[i][0].VTxDescrRing,
			(RXD**)&pAC->TxPort[i][0].pTxdRingHead,
			(RXD**)&pAC->TxPort[i][0].pTxdRingTail,
			(RXD**)&pAC->TxPort[i][0].pTxdRingPrev,
			&pAC->TxPort[i][0].TxdRingFree,
			SK_TRUE);
		SetupRing(
			pAC,
			pAC->RxPort[i].pRxDescrRing,
			pAC->RxPort[i].VRxDescrRing,
			&pAC->RxPort[i].pRxdRingHead,
			&pAC->RxPort[i].pRxdRingTail,
			&pAC->RxPort[i].pRxdRingPrev,
			&pAC->RxPort[i].RxdRingFree,
			SK_FALSE);
	}
} /* BoardInitMem */


/*****************************************************************************
 *
 * 	SetupRing - create one descriptor ring
 *
 * Description:
 *	This function creates one descriptor ring in the given memory area.
 *	The head, tail and number of free descriptors in the ring are set.
 *
 * Returns:
 *	none
 */
static void SetupRing(
SK_AC		*pAC,
void		*pMemArea,	/* a pointer to the memory area for the ring */
uintptr_t	VMemArea,	/* the virtual bus address of the memory area */
RXD		**ppRingHead,	/* address where the head should be written */
RXD		**ppRingTail,	/* address where the tail should be written */
RXD		**ppRingPrev,	/* address where the tail should be written */
int		*pRingFree,	/* address where the # of free descr. goes */
SK_BOOL		IsTx)		/* flag: is this a tx ring */
{
int	i;		/* loop counter */
int	DescrSize;	/* the size of a descriptor rounded up to alignment*/
int	DescrNum;	/* number of descriptors per ring */
RXD	*pDescr;	/* pointer to a descriptor (receive or transmit) */
RXD	*pNextDescr;	/* pointer to the next descriptor */
RXD	*pPrevDescr;	/* pointer to the previous descriptor */
uintptr_t VNextDescr;	/* the virtual bus address of the next descriptor */

	if (IsTx == SK_TRUE) {
		DescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) *
			DESCR_ALIGN;
		DescrNum = TX_RING_SIZE / DescrSize;
	} else {
		DescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) *
			DESCR_ALIGN;
		DescrNum = RX_RING_SIZE / DescrSize;
	}

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
		("Descriptor size: %d   Descriptor Number: %d\n",
		DescrSize,DescrNum));

	pDescr = (RXD*) pMemArea;
	pPrevDescr = NULL;
	pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
	VNextDescr = VMemArea + DescrSize;
	for(i=0; i<DescrNum; i++) {
		/* set the pointers right */
		pDescr->VNextRxd = VNextDescr & 0xffffffffULL;
		pDescr->pNextRxd = pNextDescr;
		pDescr->TcpSumStarts = pAC->CsOfs;

		/* advance one step */
		pPrevDescr = pDescr;
		pDescr = pNextDescr;
		pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
		VNextDescr += DescrSize;
	}
	pPrevDescr->pNextRxd = (RXD*) pMemArea;
	pPrevDescr->VNextRxd = VMemArea;
	pDescr = (RXD*) pMemArea;
	*ppRingHead = (RXD*) pMemArea;
	*ppRingTail = *ppRingHead;
	*ppRingPrev = pPrevDescr;
	*pRingFree = DescrNum;
} /* SetupRing */


/*****************************************************************************
 *
 * 	PortReInitBmu - re-initiate the descriptor rings for one port
 *
 * Description:
 *	This function reinitializes the descriptor rings of one port
 *	in memory. The port must be stopped before.
 *	The HW is initialized with the descriptor start addresses.
 *
 * Returns:
 *	none
 */
static void PortReInitBmu(
SK_AC	*pAC,		/* pointer to adapter context */
int	PortIndex)	/* index of the port for which to re-init */
{
	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("PortReInitBmu "));

	/* set address of first descriptor of ring in BMU */
	SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+
		TX_Q_CUR_DESCR_LOW,
		(uint32_t)(((caddr_t)
		(pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
		pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
		pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) &
		0xFFFFFFFF));
	SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+
		TX_Q_DESCR_HIGH,
		(uint32_t)(((caddr_t)
		(pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
		pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
		pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) >> 32));
	SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+RX_Q_CUR_DESCR_LOW,
		(uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
		pAC->RxPort[PortIndex].pRxDescrRing +
		pAC->RxPort[PortIndex].VRxDescrRing) & 0xFFFFFFFF));
	SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+RX_Q_DESCR_HIGH,
		(uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
		pAC->RxPort[PortIndex].pRxDescrRing +
		pAC->RxPort[PortIndex].VRxDescrRing) >> 32));
} /* PortReInitBmu */


/****************************************************************************
 *
 *	SkGeIsr - handle adapter interrupts
 *
 * Description:
 *	The interrupt routine is called when the network adapter
 *	generates an interrupt. It may also be called if another device
 *	shares this interrupt vector with the driver.
 *
 * Returns: N/A
 *
 */
#if 0
static void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs)
#else
void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs)
#endif
{
struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
DEV_NET		*pNet;
SK_AC		*pAC;
SK_U32		IntSrc;		/* interrupts source register contents */

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	/*
	 * Check and process if its our interrupt
	 */
	SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
	if (IntSrc == 0) {
		return;
	}

	while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
#if 0 /* software irq currently not used */
		if (IntSrc & IRQ_SW) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("Software IRQ\n"));
		}
#endif
		if (IntSrc & IRQ_EOF_RX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF RX1 IRQ\n"));
			ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
			SK_PNMI_CNT_RX_INTR(pAC, 0);
		}
		if (IntSrc & IRQ_EOF_RX2) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF RX2 IRQ\n"));
			ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);
			SK_PNMI_CNT_RX_INTR(pAC, 1);
		}
#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
		if (IntSrc & IRQ_EOF_AS_TX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF AS TX1 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC, 0);
			spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
			FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
			spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
		}
		if (IntSrc & IRQ_EOF_AS_TX2) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF AS TX2 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC, 1);
			spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
			FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]);
			spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
		}
#if 0 /* only if sync. queues used */
		if (IntSrc & IRQ_EOF_SY_TX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF SY TX1 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC, 1);
			spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
			FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
			spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
			ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
		}
		if (IntSrc & IRQ_EOF_SY_TX2) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF SY TX2 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC, 1);
			spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
			FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH);
			spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
			ClearTxIrq(pAC, 1, TX_PRIO_HIGH);
		}
#endif
#endif

		/* do all IO at once */
		if (IntSrc & IRQ_EOF_RX1)
			ClearAndStartRx(pAC, 0);
		if (IntSrc & IRQ_EOF_RX2)
			ClearAndStartRx(pAC, 1);
#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
		if (IntSrc & IRQ_EOF_AS_TX1)
			ClearTxIrq(pAC, 0, TX_PRIO_LOW);
		if (IntSrc & IRQ_EOF_AS_TX2)
			ClearTxIrq(pAC, 1, TX_PRIO_LOW);
#endif
		SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
	} /* while (IntSrc & IRQ_MASK != 0) */

	if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
			("SPECIAL IRQ DP-Cards => %x\n", IntSrc));
		pAC->CheckQueue = SK_FALSE;
		spin_lock(&pAC->SlowPathLock);
		if (IntSrc & SPECIAL_IRQS)
			SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);

		SkEventDispatcher(pAC, pAC->IoBase);
		spin_unlock(&pAC->SlowPathLock);
	}
	/*
	 * do it all again is case we cleared an interrupt that
	 * came in after handling the ring (OUTs may be delayed
	 * in hardware buffers, but are through after IN)
	 */

	ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
	ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);

	if (pAC->CheckQueue) {
		pAC->CheckQueue = SK_FALSE;
		spin_lock(&pAC->SlowPathLock);
		SkEventDispatcher(pAC, pAC->IoBase);
		spin_unlock(&pAC->SlowPathLock);
	}


	/* IRQ is processed - Enable IRQs again*/
	SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);

	return;
} /* SkGeIsr */


/****************************************************************************
 *
 *	SkGeIsrOnePort - handle adapter interrupts for single port adapter
 *
 * Description:
 *	The interrupt routine is called when the network adapter
 *	generates an interrupt. It may also be called if another device
 *	shares this interrupt vector with the driver.
 *	This is the same as above, but handles only one port.
 *
 * Returns: N/A
 *
 */
#if 0
static void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs)
#else
void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs)
#endif
{
struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
DEV_NET		*pNet;
SK_AC		*pAC;
SK_U32		IntSrc;		/* interrupts source register contents */

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	/*
	 * Check and process if its our interrupt
	 */
	SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
	if (IntSrc == 0) {
		return;
	}

	while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
#if 0 /* software irq currently not used */
		if (IntSrc & IRQ_SW) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("Software IRQ\n"));
		}
#endif
		if (IntSrc & IRQ_EOF_RX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF RX1 IRQ\n"));
			ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
			SK_PNMI_CNT_RX_INTR(pAC, 0);
		}
#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
		if (IntSrc & IRQ_EOF_AS_TX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF AS TX1 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC, 0);
			spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
			FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
			spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
		}
#if 0 /* only if sync. queues used */
		if (IntSrc & IRQ_EOF_SY_TX1) {
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_INT_SRC,
				("EOF SY TX1 IRQ\n"));
			SK_PNMI_CNT_TX_INTR(pAC, 0);
			spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
			FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
			spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
			ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
		}
#endif
#endif

		/* do all IO at once */
		if (IntSrc & IRQ_EOF_RX1)
			ClearAndStartRx(pAC, 0);
#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
		if (IntSrc & IRQ_EOF_AS_TX1)
			ClearTxIrq(pAC, 0, TX_PRIO_LOW);
#endif
		SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
	} /* while (IntSrc & IRQ_MASK != 0) */

	if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
			("SPECIAL IRQ SP-Cards => %x\n", IntSrc));
		pAC->CheckQueue = SK_FALSE;
		spin_lock(&pAC->SlowPathLock);
		if (IntSrc & SPECIAL_IRQS)
			SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);

		SkEventDispatcher(pAC, pAC->IoBase);
		spin_unlock(&pAC->SlowPathLock);
	}
	/*
	 * do it all again is case we cleared an interrupt that
	 * came in after handling the ring (OUTs may be delayed
	 * in hardware buffers, but are through after IN)
	 */
	ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);

	/* IRQ is processed - Enable IRQs again*/
	SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);

	return;
} /* SkGeIsrOnePort */


/****************************************************************************
 *
 *	SkGeOpen - handle start of initialized adapter
 *
 * Description:
 *	This function starts the initialized adapter.
 *	The board level variable is set and the adapter is
 *	brought to full functionality.
 *	The device flags are set for operation.
 *	Do all necessary level 2 initialization, enable interrupts and
 *	give start command to RLMT.
 *
 * Returns:
 *	0 on success
 *	!= 0 on error
 */
#if 0
static int SkGeOpen(
#else
int SkGeOpen(
#endif
struct SK_NET_DEVICE	*dev)
{
	DEV_NET			*pNet;
	SK_AC			*pAC;
	unsigned long	Flags;		/* for spin lock */
	int				i;
	SK_EVPARA		EvPara;		/* an event parameter union */

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC));

	if (pAC->BoardLevel == 0) {
		/* level 1 init common modules here */
		if (SkGeInit(pAC, pAC->IoBase, 1) != 0) {
			printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name);
			return (-1);
		}
		SkI2cInit	(pAC, pAC->IoBase, 1);
		SkEventInit	(pAC, pAC->IoBase, 1);
		SkPnmiInit	(pAC, pAC->IoBase, 1);
		SkAddrInit	(pAC, pAC->IoBase, 1);
		SkRlmtInit	(pAC, pAC->IoBase, 1);
		SkTimerInit	(pAC, pAC->IoBase, 1);
		pAC->BoardLevel = 1;
	}

	if (pAC->BoardLevel != 2) {
		/* tschilling: Level 2 init modules here, check return value. */
		if (SkGeInit(pAC, pAC->IoBase, 2) != 0) {
			printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name);
			return (-1);
		}
		SkI2cInit	(pAC, pAC->IoBase, 2);
		SkEventInit	(pAC, pAC->IoBase, 2);
		SkPnmiInit	(pAC, pAC->IoBase, 2);
		SkAddrInit	(pAC, pAC->IoBase, 2);
		SkRlmtInit	(pAC, pAC->IoBase, 2);
		SkTimerInit	(pAC, pAC->IoBase, 2);
		pAC->BoardLevel = 2;
	}

	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		/* Enable transmit descriptor polling. */
		SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
		FillRxRing(pAC, &pAC->RxPort[i]);
	}
	SkGeYellowLED(pAC, pAC->IoBase, 1);

#ifdef USE_INT_MOD
/* moderate only TX complete interrupts (these are not time critical) */
#define IRQ_MOD_MASK (IRQ_EOF_AS_TX1 | IRQ_EOF_AS_TX2)
	{
		unsigned long ModBase;
		ModBase = 53125000 / INTS_PER_SEC;
		SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
		SK_OUT32(pAC->IoBase, B2_IRQM_MSK, IRQ_MOD_MASK);
		SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
	}
#endif

	/* enable Interrupts */
	SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);
	SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);

	spin_lock_irqsave(&pAC->SlowPathLock, Flags);

	if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) {
		EvPara.Para32[0] = pAC->RlmtNets;
		EvPara.Para32[1] = -1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS,
			EvPara);
		EvPara.Para32[0] = pAC->RlmtMode;
		EvPara.Para32[1] = 0;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE,
			EvPara);
	}

	EvPara.Para32[0] = pNet->NetNr;
	EvPara.Para32[1] = -1;
	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
	SkEventDispatcher(pAC, pAC->IoBase);
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);

	pAC->MaxPorts++;
	pNet->Up = 1;

	MOD_INC_USE_COUNT;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeOpen suceeded\n"));

	return (0);
} /* SkGeOpen */


/****************************************************************************
 *
 *	SkGeClose - Stop initialized adapter
 *
 * Description:
 *	Close initialized adapter.
 *
 * Returns:
 *	0 - on success
 *	error code - on error
 */
#if 0
static int SkGeClose(
#else
int SkGeClose(
#endif
struct SK_NET_DEVICE	*dev)
{
	DEV_NET			*pNet;
	SK_AC			*pAC;

	unsigned long	Flags;		/* for spin lock */
	int				i;
	int				PortIdx;
	SK_EVPARA		EvPara;

	netif_stop_queue(dev);
	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	if (pAC->RlmtNets == 1)
		PortIdx = pAC->ActivePort;
	else
		PortIdx = pNet->NetNr;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeClose: pAC=0x%lX ", (unsigned long)pAC));

	/*
	 * Clear multicast table, promiscuous mode ....
	 */
	SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
	SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
		SK_PROM_MODE_NONE);

	if (pAC->MaxPorts == 1) {
		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
		/* disable interrupts */
		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
		EvPara.Para32[0] = pNet->NetNr;
		EvPara.Para32[1] = -1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
		SkEventDispatcher(pAC, pAC->IoBase);
		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
		/* stop the hardware */
		SkGeDeInit(pAC, pAC->IoBase);
		pAC->BoardLevel = 0;
		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
	} else {

		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
		EvPara.Para32[0] = pNet->NetNr;
		EvPara.Para32[1] = -1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
		SkEventDispatcher(pAC, pAC->IoBase);
		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);

		/* Stop port */
		spin_lock_irqsave(&pAC->TxPort[pNet->PortNr]
			[TX_PRIO_LOW].TxDesRingLock, Flags);
		SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr,
			SK_STOP_ALL, SK_HARD_RST);
		spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr]
			[TX_PRIO_LOW].TxDesRingLock, Flags);
	}

	if (pAC->RlmtNets == 1) {
		/* clear all descriptor rings */
		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
			ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
			ClearRxRing(pAC, &pAC->RxPort[i]);
			ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]);
		}
	} else {
		/* clear port descriptor rings */
		ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr], SK_TRUE);
		ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]);
		ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]);
	}

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeClose: done "));

	pAC->MaxPorts--;
	pNet->Up = 0;
	MOD_DEC_USE_COUNT;

	return (0);
} /* SkGeClose */


/*****************************************************************************
 *
 * 	SkGeXmit - Linux frame transmit function
 *
 * Description:
 *	The system calls this function to send frames onto the wire.
 *	It puts the frame in the tx descriptor ring. If the ring is
 *	full then, the 'tbusy' flag is set.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 * WARNING: returning 1 in 'tbusy' case caused system crashes (double
 *	allocated skb's) !!!
 */
#if 0
static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev)
#else
int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev)
#endif
{
DEV_NET		*pNet;
SK_AC		*pAC;
int			Rc;	/* return code of XmitFrame */

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

#if 0
	if ((!skb_shinfo(skb)->nr_frags) ||
#else
	if (1 ||
#endif
		(pAC->GIni.GIChipId == CHIP_ID_GENESIS)) {
		/* Don't activate scatter-gather and hardware checksum */

		if (pAC->RlmtNets == 2)
			Rc = XmitFrame(
				pAC,
				&pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
				skb);
		else
			Rc = XmitFrame(
				pAC,
				&pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
				skb);
	} else {
#if 0
		/* scatter-gather and hardware TCP checksumming anabled*/
		if (pAC->RlmtNets == 2)
			Rc = XmitFrameSG(
				pAC,
				&pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
				skb);
		else
			Rc = XmitFrameSG(
				pAC,
				&pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
				skb);
#endif
	}

	/* Transmitter out of resources? */
	if (Rc <= 0) {
		netif_stop_queue(dev);
	}

	/* If not taken, give buffer ownership back to the
	 * queueing layer.
	 */
	if (Rc < 0)
		return (1);

#if 0
	dev->trans_start = jiffies;
#endif
	return (0);
} /* SkGeXmit */


/*****************************************************************************
 *
 * 	XmitFrame - fill one socket buffer into the transmit ring
 *
 * Description:
 *	This function puts a message into the transmit descriptor ring
 *	if there is a descriptors left.
 *	Linux skb's consist of only one continuous buffer.
 *	The first step locks the ring. It is held locked
 *	all time to avoid problems with SWITCH_../PORT_RESET.
 *	Then the descriptoris allocated.
 *	The second part is linking the buffer to the descriptor.
 *	At the very last, the Control field of the descriptor
 *	is made valid for the BMU and a start TX command is given
 *	if necessary.
 *
 * Returns:
 *	> 0 - on succes: the number of bytes in the message
 *	= 0 - on resource shortage: this frame sent or dropped, now
 *		the ring is full ( -> set tbusy)
 *	< 0 - on failure: other problems ( -> return failure to upper layers)
 */
static int XmitFrame(
SK_AC 		*pAC,		/* pointer to adapter context */
TX_PORT		*pTxPort,	/* pointer to struct of port to send to */
struct sk_buff	*pMessage)	/* pointer to send-message */
{
TXD		*pTxd;		/* the rxd to fill */
unsigned long	Flags;
SK_U64		PhysAddr;
int		BytesSend;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
		("X"));

	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
#ifndef USE_TX_COMPLETE
	FreeTxDescriptors(pAC, pTxPort);
#endif
	if (pTxPort->TxdRingFree == 0) {
		/* no enough free descriptors in ring at the moment */
		FreeTxDescriptors(pAC, pTxPort);
		if (pTxPort->TxdRingFree == 0) {
			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
			SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_TX_PROGRESS,
				("XmitFrame failed\n"));
			/* this message can not be sent now */
			/* Because tbusy seems to be set, the message should not be freed here */
			/* It will be used by the scheduler of the ethernet handler */
			return (-1);
		}
	}
	/* advance head counter behind descriptor needed for this frame */
	pTxd = pTxPort->pTxdRingHead;
	pTxPort->pTxdRingHead = pTxd->pNextTxd;
	pTxPort->TxdRingFree--;
	/* the needed descriptor is reserved now */

	/*
	 * everything allocated ok, so add buffer to descriptor
	 */

#ifdef SK_DUMP_TX
	DumpMsg(pMessage, "XmitFrame");
#endif

	/* set up descriptor and CONTROL dword */
#if 0
	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
		virt_to_page(pMessage->data),
		((unsigned long) pMessage->data &
		~PAGE_MASK),
		pMessage->len,
		PCI_DMA_TODEVICE);
#else
	PhysAddr = (SK_U64) pci_phys_to_mem(pAC->PciDev, (u32) pMessage->data);
#endif
	pTxd->VDataLow = (SK_U32)  (PhysAddr & 0xffffffff);
	pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
	pTxd->pMBuf = pMessage;
	pTxd->TBControl = TX_CTRL_OWN_BMU | TX_CTRL_STF |
		TX_CTRL_CHECK_DEFAULT | TX_CTRL_SOFTWARE |
#ifdef USE_TX_COMPLETE
		TX_CTRL_EOF | TX_CTRL_EOF_IRQ | pMessage->len;
#else
		TX_CTRL_EOF | pMessage->len;
#endif

	if ((pTxPort->pTxdRingPrev->TBControl & TX_CTRL_OWN_BMU) == 0) {
		/* previous descriptor already done, so give tx start cmd */
		/* StartTx(pAC, pTxPort->HwAddr); */
		SK_OUT8(pTxPort->HwAddr, TX_Q_CTRL, TX_Q_CTRL_START);
	}
	pTxPort->pTxdRingPrev = pTxd;


	BytesSend = pMessage->len;
	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
	/* after releasing the lock, the skb may be immidiately freed */
	if (pTxPort->TxdRingFree != 0)
		return (BytesSend);
	else
		return (0);

} /* XmitFrame */

/*****************************************************************************
 *
 * 	XmitFrameSG - fill one socket buffer into the transmit ring
 *                (use SG and TCP/UDP hardware checksumming)
 *
 * Description:
 *	This function puts a message into the transmit descriptor ring
 *	if there is a descriptors left.
 *
 * Returns:
 *	> 0 - on succes: the number of bytes in the message
 *	= 0 - on resource shortage: this frame sent or dropped, now
 *		the ring is full ( -> set tbusy)
 *	< 0 - on failure: other problems ( -> return failure to upper layers)
 */
#if 0
static int XmitFrameSG(
SK_AC 		*pAC,			/* pointer to adapter context */
TX_PORT		*pTxPort,		/* pointer to struct of port to send to */
struct sk_buff	*pMessage)	/* pointer to send-message */
{

	int 		i;
	int			BytesSend;
	int			hlength;
	int			protocol;
	skb_frag_t		*sk_frag;
	TXD			*pTxd;
	TXD			*pTxdFst;
	TXD			*pTxdLst;
	SK_U64		PhysAddr;
	unsigned long	Flags;

	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
#ifndef USE_TX_COMPLETE
	FreeTxDescriptors(pAC, pTxPort);
#endif
	if ((skb_shinfo(pMessage)->nr_frags +1) > pTxPort->TxdRingFree) {
		FreeTxDescriptors(pAC, pTxPort);
		if ((skb_shinfo(pMessage)->nr_frags + 1) > pTxPort->TxdRingFree) {
			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
			SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_TX_PROGRESS,
				("XmitFrameSG failed - Ring full\n"));
				/* this message can not be sent now */
			return(-1);
		}
	}


	pTxd = pTxPort->pTxdRingHead;
	pTxdFst = pTxd;
	pTxdLst = pTxd;
	BytesSend = 0;
	protocol = 0;

	/* map first fragment (header) */
	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
			virt_to_page(pMessage->data),
			((unsigned long) pMessage->data & ~PAGE_MASK),
			skb_headlen(pMessage),
			PCI_DMA_TODEVICE);

	pTxd->VDataLow = (SK_U32)  (PhysAddr & 0xffffffff);
	pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);

	/* HW checksum? */
	if (pMessage->ip_summed == CHECKSUM_HW) {
		pTxd->TBControl = TX_CTRL_STF |
				  TX_CTRL_ST_FWD |
				  skb_headlen(pMessage);

		/* We have to use the opcode for tcp here because the opcode for
		udp is not working in the hardware yet (revision 2.0)*/
		protocol = ((SK_U8)pMessage->data[23] & 0xf);
		if ((protocol == 17) && (pAC->GIni.GIChipRev != 0))
			pTxd->TBControl |=  BMU_UDP_CHECK;
		else
			pTxd->TBControl |= BMU_TCP_CHECK ;

		hlength = ((SK_U8)pMessage->data[14] & 0xf) * 4;
		pTxd->TcpSumOfs = 0; /* PH-Checksum already claculated */
		pTxd->TcpSumSt = 14+hlength+16;
		pTxd->TcpSumWr = 14+hlength;

	} else {
		pTxd->TBControl = TX_CTRL_CHECK_DEFAULT |
				  TX_CTRL_SOFTWARE |
				  TX_CTRL_STF |
				  skb_headlen(pMessage);
	}

	pTxd = pTxd->pNextTxd;
	pTxPort->TxdRingFree--;
	BytesSend += skb_headlen(pMessage);


	/* Map SG fragments */
	for (i = 0; i < skb_shinfo(pMessage)->nr_frags; i++) {
		sk_frag = &skb_shinfo(pMessage)->frags[i];

		/* we already have the proper value in entry */
		PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
						 sk_frag->page,
						 sk_frag->page_offset,
						 sk_frag->size,
						 PCI_DMA_TODEVICE);

		pTxd->VDataLow = (SK_U32)  (PhysAddr & 0xffffffff);
		pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
		pTxd->pMBuf = pMessage;

		/* HW checksum */
		if (pMessage->ip_summed == CHECKSUM_HW) {
			pTxd->TBControl = TX_CTRL_OWN_BMU |
					  TX_CTRL_SOFTWARE |
					  TX_CTRL_ST_FWD;

			/* We have to use the opcode for tcp here because the opcode for
			udp is not working in the hardware yet (revision 2.0)*/
			if ((protocol == 17) && (pAC->GIni.GIChipRev != 0))
				pTxd->TBControl |= BMU_UDP_CHECK ;
			else
				pTxd->TBControl |= BMU_TCP_CHECK ;

		} else {
			pTxd->TBControl = TX_CTRL_CHECK_DEFAULT |
					  TX_CTRL_SOFTWARE |
					  TX_CTRL_OWN_BMU;
		}

		/* Last fragment  */
		if( (i+1) == skb_shinfo(pMessage)->nr_frags )  {
#ifdef USE_TX_COMPLETE
			pTxd->TBControl |= TX_CTRL_EOF |
					   TX_CTRL_EOF_IRQ |
					   sk_frag->size;
#else
			pTxd->TBControl |= TX_CTRL_EOF |
					   sk_frag->size;
#endif
			pTxdFst->TBControl |= TX_CTRL_OWN_BMU |
					      TX_CTRL_SOFTWARE;

		} else {
			pTxd->TBControl |= sk_frag->size;
		}
		pTxdLst = pTxd;
		pTxd = pTxd->pNextTxd;
		pTxPort->TxdRingFree--;
		BytesSend += sk_frag->size;
	}

	if ((pTxPort->pTxdRingPrev->TBControl & TX_CTRL_OWN_BMU) == 0) {
		/* previous descriptor already done, so give tx start cmd */
		/* StartTx(pAC, pTxPort->HwAddr); */
		SK_OUT8(pTxPort->HwAddr, TX_Q_CTRL, TX_Q_CTRL_START);
	}

	pTxPort->pTxdRingPrev = pTxdLst;
	pTxPort->pTxdRingHead = pTxd;

	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);

	if (pTxPort->TxdRingFree > 0)
		return (BytesSend);
	else
		return (0);
}
#endif


void dump_frag( SK_U8 *data, int length)
{
	int i;

	printk("Length: %d\n", length);
	for( i=0; i < length; i++ ) {
		printk(" %02x", (SK_U8)*(data + i) );
		if( !((i+1) % 20) )
		  printk("\n");
	}
	printk("\n\n");

}


/*****************************************************************************
 *
 * 	FreeTxDescriptors - release descriptors from the descriptor ring
 *
 * Description:
 *	This function releases descriptors from a transmit ring if they
 *	have been sent by the BMU.
 *	If a descriptors is sent, it can be freed and the message can
 *	be freed, too.
 *	The SOFTWARE controllable bit is used to prevent running around a
 *	completely free ring for ever. If this bit is no set in the
 *	frame (by XmitFrame), this frame has never been sent or is
 *	already freed.
 *	The Tx descriptor ring lock must be held while calling this function !!!
 *
 * Returns:
 *	none
 */
static void FreeTxDescriptors(
SK_AC	*pAC,		/* pointer to the adapter context */
TX_PORT	*pTxPort)	/* pointer to destination port structure */
{
TXD	*pTxd;		/* pointer to the checked descriptor */
TXD	*pNewTail;	/* pointer to 'end' of the ring */
SK_U32	Control;	/* TBControl field of descriptor */
SK_U64	PhysAddr;	/* address of DMA mapping */

	pNewTail = pTxPort->pTxdRingTail;
	pTxd = pNewTail;
	/*
	 * loop forever; exits if TX_CTRL_SOFTWARE bit not set in start frame
	 * or TX_CTRL_OWN_BMU bit set in any frame
	 */
	while (1) {
		Control = pTxd->TBControl;
		if ((Control & TX_CTRL_SOFTWARE) == 0) {
			/*
			 * software controllable bit is set in first
			 * fragment when given to BMU. Not set means that
			 * this fragment was never sent or is already
			 * freed ( -> ring completely free now).
			 */
			pTxPort->pTxdRingTail = pTxd;
			netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
			return;
		}
		if (Control & TX_CTRL_OWN_BMU) {
			pTxPort->pTxdRingTail = pTxd;
			if (pTxPort->TxdRingFree > 0) {
				netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
			}
			return;
		}

		/* release the DMA mapping */
		PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32;
		PhysAddr |= (SK_U64) pTxd->VDataLow;
		pci_unmap_page(pAC->PciDev, PhysAddr,
				 pTxd->pMBuf->len,
				 PCI_DMA_TODEVICE);

		if (Control & TX_CTRL_EOF)
			DEV_KFREE_SKB_ANY(pTxd->pMBuf);	/* free message */

		pTxPort->TxdRingFree++;
		pTxd->TBControl &= ~TX_CTRL_SOFTWARE;
		pTxd = pTxd->pNextTxd; /* point behind fragment with EOF */
	} /* while(forever) */
} /* FreeTxDescriptors */

/*****************************************************************************
 *
 * 	FillRxRing - fill the receive ring with valid descriptors
 *
 * Description:
 *	This function fills the receive ring descriptors with data
 *	segments and makes them valid for the BMU.
 *	The active ring is filled completely, if possible.
 *	The non-active ring is filled only partial to save memory.
 *
 * Description of rx ring structure:
 *	head - points to the descriptor which will be used next by the BMU
 *	tail - points to the next descriptor to give to the BMU
 *
 * Returns:	N/A
 */
static void FillRxRing(
SK_AC		*pAC,		/* pointer to the adapter context */
RX_PORT		*pRxPort)	/* ptr to port struct for which the ring
				   should be filled */
{
unsigned long	Flags;

	spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
	while (pRxPort->RxdRingFree > pRxPort->RxFillLimit) {
		if(!FillRxDescriptor(pAC, pRxPort))
			break;
	}
	spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
} /* FillRxRing */


/*****************************************************************************
 *
 * 	FillRxDescriptor - fill one buffer into the receive ring
 *
 * Description:
 *	The function allocates a new receive buffer and
 *	puts it into the next descriptor.
 *
 * Returns:
 *	SK_TRUE - a buffer was added to the ring
 *	SK_FALSE - a buffer could not be added
 */
static SK_BOOL FillRxDescriptor(
SK_AC		*pAC,		/* pointer to the adapter context struct */
RX_PORT		*pRxPort)	/* ptr to port struct of ring to fill */
{
struct sk_buff	*pMsgBlock;	/* pointer to a new message block */
RXD		*pRxd;		/* the rxd to fill */
SK_U16		Length;		/* data fragment length */
SK_U64		PhysAddr;	/* physical address of a rx buffer */

	pMsgBlock = alloc_skb(pAC->RxBufSize, GFP_ATOMIC);
	if (pMsgBlock == NULL) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
			SK_DBGCAT_DRV_ENTRY,
			("%s: Allocation of rx buffer failed !\n",
			pAC->dev[pRxPort->PortIndex]->name));
		SK_PNMI_CNT_NO_RX_BUF(pAC, pRxPort->PortIndex);
		return(SK_FALSE);
	}
	skb_reserve(pMsgBlock, 2); /* to align IP frames */
	/* skb allocated ok, so add buffer */
	pRxd = pRxPort->pRxdRingTail;
	pRxPort->pRxdRingTail = pRxd->pNextRxd;
	pRxPort->RxdRingFree--;
	Length = pAC->RxBufSize;
#if 0
	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
		virt_to_page(pMsgBlock->data),
		((unsigned long) pMsgBlock->data &
		~PAGE_MASK),
		pAC->RxBufSize - 2,
		PCI_DMA_FROMDEVICE);
#else
	PhysAddr = (SK_U64) pci_phys_to_mem(pAC->PciDev, (u32)pMsgBlock->data);
#endif
	pRxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff);
	pRxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
	pRxd->pMBuf = pMsgBlock;
	pRxd->RBControl = RX_CTRL_OWN_BMU | RX_CTRL_STF |
		RX_CTRL_EOF_IRQ | RX_CTRL_CHECK_CSUM | Length;
	return (SK_TRUE);

} /* FillRxDescriptor */


/*****************************************************************************
 *
 * 	ReQueueRxBuffer - fill one buffer back into the receive ring
 *
 * Description:
 *	Fill a given buffer back into the rx ring. The buffer
 *	has been previously allocated and aligned, and its phys.
 *	address calculated, so this is no more necessary.
 *
 * Returns: N/A
 */
static void ReQueueRxBuffer(
SK_AC		*pAC,		/* pointer to the adapter context struct */
RX_PORT		*pRxPort,	/* ptr to port struct of ring to fill */
struct sk_buff	*pMsg,		/* pointer to the buffer */
SK_U32		PhysHigh,	/* phys address high dword */
SK_U32		PhysLow)	/* phys address low dword */
{
RXD		*pRxd;		/* the rxd to fill */
SK_U16		Length;		/* data fragment length */

	pRxd = pRxPort->pRxdRingTail;
	pRxPort->pRxdRingTail = pRxd->pNextRxd;
	pRxPort->RxdRingFree--;
	Length = pAC->RxBufSize;
	pRxd->VDataLow = PhysLow;
	pRxd->VDataHigh = PhysHigh;
	pRxd->pMBuf = pMsg;
	pRxd->RBControl = RX_CTRL_OWN_BMU | RX_CTRL_STF |
		RX_CTRL_EOF_IRQ | RX_CTRL_CHECK_CSUM | Length;
	return;
} /* ReQueueRxBuffer */


/*****************************************************************************
 *
 * 	ReceiveIrq - handle a receive IRQ
 *
 * Description:
 *	This function is called when a receive IRQ is set.
 *	It walks the receive descriptor ring and sends up all
 *	frames that are complete.
 *
 * Returns:	N/A
 */
#if 0
static void ReceiveIrq(
#else
void ReceiveIrq(
#endif
	SK_AC		*pAC,			/* pointer to adapter context */
	RX_PORT		*pRxPort,		/* pointer to receive port struct */
	SK_BOOL		SlowPathLock)	/* indicates if SlowPathLock is needed */
{
RXD				*pRxd;			/* pointer to receive descriptors */
SK_U32			Control;		/* control field of descriptor */
struct sk_buff	*pMsg;			/* pointer to message holding frame */
struct sk_buff	*pNewMsg;		/* pointer to a new message for copying frame */
int				FrameLength;	/* total length of received frame */
SK_MBUF			*pRlmtMbuf;		/* ptr to a buffer for giving a frame to rlmt */
SK_EVPARA		EvPara;			/* an event parameter union */
unsigned long	Flags;			/* for spin lock */
int				PortIndex = pRxPort->PortIndex;
unsigned int	Offset;
unsigned int	NumBytes;
unsigned int	ForRlmt;
SK_BOOL			IsBc;
SK_BOOL			IsMc;
SK_BOOL  IsBadFrame; 			/* Bad frame */

SK_U32			FrameStat;
unsigned short	Csum1;
unsigned short	Csum2;
unsigned short	Type;
#if 0
int				Result;
#endif
SK_U64			PhysAddr;

rx_start:
	/* do forever; exit if RX_CTRL_OWN_BMU found */
	for ( pRxd = pRxPort->pRxdRingHead ;
		  pRxPort->RxdRingFree < pAC->RxDescrPerRing ;
		  pRxd = pRxd->pNextRxd,
		  pRxPort->pRxdRingHead = pRxd,
		  pRxPort->RxdRingFree ++) {

		/*
		 * For a better understanding of this loop
		 * Go through every descriptor beginning at the head
		 * Please note: the ring might be completely received so the OWN bit
		 * set is not a good crirteria to leave that loop.
		 * Therefore the RingFree counter is used.
		 * On entry of this loop pRxd is a pointer to the Rxd that needs
		 * to be checked next.
		 */

		Control = pRxd->RBControl;

		/* check if this descriptor is ready */
		if ((Control & RX_CTRL_OWN_BMU) != 0) {
			/* this descriptor is not yet ready */
			/* This is the usual end of the loop */
			/* We don't need to start the ring again */
			FillRxRing(pAC, pRxPort);
			return;
		}

		/* get length of frame and check it */
		FrameLength = Control & RX_CTRL_LEN_MASK;
		if (FrameLength > pAC->RxBufSize) {
			goto rx_failed;
		}

		/* check for STF and EOF */
		if ((Control & (RX_CTRL_STF | RX_CTRL_EOF)) !=
			(RX_CTRL_STF | RX_CTRL_EOF)) {
			goto rx_failed;
		}

		/* here we have a complete frame in the ring */
		pMsg = pRxd->pMBuf;

		FrameStat = pRxd->FrameStat;

		/* check for frame length mismatch */
#define XMR_FS_LEN_SHIFT        18
#define GMR_FS_LEN_SHIFT        16
		if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
			if (FrameLength != (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)) {
				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
					SK_DBGCAT_DRV_RX_PROGRESS,
					("skge: Frame length mismatch (%u/%u).\n",
					FrameLength,
					(SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
				goto rx_failed;
			}
		}
		else {
			if (FrameLength != (SK_U32) (FrameStat >> GMR_FS_LEN_SHIFT)) {
				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
					SK_DBGCAT_DRV_RX_PROGRESS,
					("skge: Frame length mismatch (%u/%u).\n",
					FrameLength,
					(SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
				goto rx_failed;
			}
		}

		/* Set Rx Status */
		if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
			IsBc = (FrameStat & XMR_FS_BC) != 0;
			IsMc = (FrameStat & XMR_FS_MC) != 0;
			IsBadFrame = (FrameStat &
				(XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0;
		} else {
			IsBc = (FrameStat & GMR_FS_BC) != 0;
			IsMc = (FrameStat & GMR_FS_MC) != 0;
			IsBadFrame = (((FrameStat & GMR_FS_ANY_ERR) != 0) ||
							((FrameStat & GMR_FS_RX_OK) == 0));
		}

		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
			("Received frame of length %d on port %d\n",
			FrameLength, PortIndex));
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
			("Number of free rx descriptors: %d\n",
			pRxPort->RxdRingFree));
/* DumpMsg(pMsg, "Rx");	*/

		if ((Control & RX_CTRL_STAT_VALID) != RX_CTRL_STAT_VALID ||
			(IsBadFrame)) {
#if 0
			(FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0) {
#endif
			/* there is a receive error in this frame */
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_RX_PROGRESS,
				("skge: Error in received frame, dropped!\n"
				"Control: %x\nRxStat: %x\n",
				Control, FrameStat));

			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
			PhysAddr |= (SK_U64) pRxd->VDataLow;
			pci_dma_sync_single(pAC->PciDev,
						(dma_addr_t) PhysAddr,
						FrameLength,
						PCI_DMA_FROMDEVICE);
			ReQueueRxBuffer(pAC, pRxPort, pMsg,
				pRxd->VDataHigh, pRxd->VDataLow);

			continue;
		}

		/*
		 * if short frame then copy data to reduce memory waste
		 */
		if ((FrameLength < SK_COPY_THRESHOLD) &&
			((pNewMsg = alloc_skb(FrameLength+2, GFP_ATOMIC)) != NULL)) {
			/*
			 * Short frame detected and allocation successfull
			 */
			/* use new skb and copy data */
			skb_reserve(pNewMsg, 2);
			skb_put(pNewMsg, FrameLength);
			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
			PhysAddr |= (SK_U64) pRxd->VDataLow;

			pci_dma_sync_single(pAC->PciDev,
						(dma_addr_t) PhysAddr,
						FrameLength,
						PCI_DMA_FROMDEVICE);
			eth_copy_and_sum(pNewMsg, pMsg->data,
				FrameLength, 0);
			ReQueueRxBuffer(pAC, pRxPort, pMsg,
				pRxd->VDataHigh, pRxd->VDataLow);
			pMsg = pNewMsg;

		}
		else {
			/*
			 * if large frame, or SKB allocation failed, pass
			 * the SKB directly to the networking
			 */

			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
			PhysAddr |= (SK_U64) pRxd->VDataLow;

			/* release the DMA mapping */
			pci_unmap_single(pAC->PciDev,
					 PhysAddr,
					 pAC->RxBufSize - 2,
					 PCI_DMA_FROMDEVICE);

			/* set length in message */
			skb_put(pMsg, FrameLength);
			/* hardware checksum */
			Type = ntohs(*((short*)&pMsg->data[12]));
			if (Type == 0x800) {
				Csum1=le16_to_cpu(pRxd->TcpSums & 0xffff);
				Csum2=le16_to_cpu((pRxd->TcpSums >> 16) & 0xffff);
#if 0
				if ((((Csum1 & 0xfffe) && (Csum2 & 0xfffe)) &&
					(pAC->GIni.GIChipId == CHIP_ID_GENESIS)) ||
					(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
					Result = SkCsGetReceiveInfo(pAC,
						&pMsg->data[14],
						Csum1, Csum2, pRxPort->PortIndex);
					if (Result ==
						SKCS_STATUS_IP_FRAGMENT ||
						Result ==
						SKCS_STATUS_IP_CSUM_OK ||
						Result ==
						SKCS_STATUS_TCP_CSUM_OK ||
						Result ==
						SKCS_STATUS_UDP_CSUM_OK) {
							pMsg->ip_summed =
							CHECKSUM_UNNECESSARY;
					} else {
						SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
						SK_DBGCAT_DRV_RX_PROGRESS,
						("skge: CRC error. Frame dropped!\n"));
						goto rx_failed;
					}
				}/* checksumControl calculation valid */
#endif
			} /* IP frame */
		} /* frame > SK_COPY_TRESHOLD */

		SK_DBG_MSG(NULL, SK_DBGMOD_DRV,	1,("V"));
		ForRlmt = SK_RLMT_RX_PROTOCOL;
#if 0
		IsBc = (FrameStat & XMR_FS_BC)==XMR_FS_BC;
#endif
		SK_RLMT_PRE_LOOKAHEAD(pAC, PortIndex, FrameLength,
			IsBc, &Offset, &NumBytes);
		if (NumBytes != 0) {
#if 0
			IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC;
#endif
			SK_RLMT_LOOKAHEAD(pAC, PortIndex,
				&pMsg->data[Offset],
				IsBc, IsMc, &ForRlmt);
		}
		if (ForRlmt == SK_RLMT_RX_PROTOCOL) {
					SK_DBG_MSG(NULL, SK_DBGMOD_DRV,	1,("W"));
			/* send up only frames from active port */
			if ((PortIndex == pAC->ActivePort) ||
				(pAC->RlmtNets == 2)) {
				/* frame for upper layer */
				SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("U"));
#ifdef xDEBUG
				DumpMsg(pMsg, "Rx");
#endif
				SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,
					FrameLength, pRxPort->PortIndex);

#if 0
				pMsg->dev = pAC->dev[pRxPort->PortIndex];
				pMsg->protocol = eth_type_trans(pMsg,
					pAC->dev[pRxPort->PortIndex]);
				netif_rx(pMsg);
				pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
#else
				NetReceive(pMsg->data, pMsg->len);
				dev_kfree_skb_any(pMsg);
#endif
			}
			else {
				/* drop frame */
				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
					SK_DBGCAT_DRV_RX_PROGRESS,
					("D"));
				DEV_KFREE_SKB(pMsg);
			}

		} /* if not for rlmt */
		else {
			/* packet for rlmt */
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
				SK_DBGCAT_DRV_RX_PROGRESS, ("R"));
			pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC,
				pAC->IoBase, FrameLength);
			if (pRlmtMbuf != NULL) {
				pRlmtMbuf->pNext = NULL;
				pRlmtMbuf->Length = FrameLength;
				pRlmtMbuf->PortIdx = PortIndex;
				EvPara.pParaPtr = pRlmtMbuf;
				memcpy((char*)(pRlmtMbuf->pData),
					   (char*)(pMsg->data),
					   FrameLength);

				/* SlowPathLock needed? */
				if (SlowPathLock == SK_TRUE) {
					spin_lock_irqsave(&pAC->SlowPathLock, Flags);
					SkEventQueue(pAC, SKGE_RLMT,
						SK_RLMT_PACKET_RECEIVED,
						EvPara);
					pAC->CheckQueue = SK_TRUE;
					spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
				} else {
					SkEventQueue(pAC, SKGE_RLMT,
						SK_RLMT_PACKET_RECEIVED,
						EvPara);
					pAC->CheckQueue = SK_TRUE;
				}

				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
					SK_DBGCAT_DRV_RX_PROGRESS,
					("Q"));
			}
#if 0
			if ((pAC->dev[pRxPort->PortIndex]->flags &
				(IFF_PROMISC | IFF_ALLMULTI)) != 0 ||
				(ForRlmt & SK_RLMT_RX_PROTOCOL) ==
				SK_RLMT_RX_PROTOCOL) {
				pMsg->dev = pAC->dev[pRxPort->PortIndex];
				pMsg->protocol = eth_type_trans(pMsg,
					pAC->dev[pRxPort->PortIndex]);
				netif_rx(pMsg);
				pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
			}
#else
			if (0) {
			}
#endif
			else {
				DEV_KFREE_SKB(pMsg);
			}

		} /* if packet for rlmt */
	} /* for ... scanning the RXD ring */

	/* RXD ring is empty -> fill and restart */
	FillRxRing(pAC, pRxPort);
	/* do not start if called from Close */
	if (pAC->BoardLevel > 0) {
		ClearAndStartRx(pAC, PortIndex);
	}
	return;

rx_failed:
	/* remove error frame */
	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
		("Schrottdescriptor, length: 0x%x\n", FrameLength));

	/* release the DMA mapping */

	PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
	PhysAddr |= (SK_U64) pRxd->VDataLow;
	pci_unmap_page(pAC->PciDev,
			 PhysAddr,
			 pAC->RxBufSize - 2,
			 PCI_DMA_FROMDEVICE);
	DEV_KFREE_SKB_IRQ(pRxd->pMBuf);
	pRxd->pMBuf = NULL;
	pRxPort->RxdRingFree++;
	pRxPort->pRxdRingHead = pRxd->pNextRxd;
	goto rx_start;

} /* ReceiveIrq */


/*****************************************************************************
 *
 * 	ClearAndStartRx - give a start receive command to BMU, clear IRQ
 *
 * Description:
 *	This function sends a start command and a clear interrupt
 *	command for one receive queue to the BMU.
 *
 * Returns: N/A
 *	none
 */
static void ClearAndStartRx(
SK_AC	*pAC,		/* pointer to the adapter context */
int	PortIndex)	/* index of the receive port (XMAC) */
{
	SK_OUT8(pAC->IoBase, RxQueueAddr[PortIndex]+RX_Q_CTRL,
		RX_Q_CTRL_START | RX_Q_CTRL_CLR_I_EOF);
} /* ClearAndStartRx */


/*****************************************************************************
 *
 * 	ClearTxIrq - give a clear transmit IRQ command to BMU
 *
 * Description:
 *	This function sends a clear tx IRQ command for one
 *	transmit queue to the BMU.
 *
 * Returns: N/A
 */
static void ClearTxIrq(
SK_AC	*pAC,		/* pointer to the adapter context */
int	PortIndex,	/* index of the transmit port (XMAC) */
int	Prio)		/* priority or normal queue */
{
	SK_OUT8(pAC->IoBase, TxQueueAddr[PortIndex][Prio]+TX_Q_CTRL,
		TX_Q_CTRL_CLR_I_EOF);
} /* ClearTxIrq */


/*****************************************************************************
 *
 * 	ClearRxRing - remove all buffers from the receive ring
 *
 * Description:
 *	This function removes all receive buffers from the ring.
 *	The receive BMU must be stopped before calling this function.
 *
 * Returns: N/A
 */
static void ClearRxRing(
SK_AC	*pAC,		/* pointer to adapter context */
RX_PORT	*pRxPort)	/* pointer to rx port struct */
{
RXD		*pRxd;	/* pointer to the current descriptor */
unsigned long	Flags;
SK_U64		PhysAddr;

	if (pRxPort->RxdRingFree == pAC->RxDescrPerRing) {
		return;
	}
	spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
	pRxd = pRxPort->pRxdRingHead;
	do {
		if (pRxd->pMBuf != NULL) {

			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
			PhysAddr |= (SK_U64) pRxd->VDataLow;
			pci_unmap_page(pAC->PciDev,
					 PhysAddr,
					 pAC->RxBufSize - 2,
					 PCI_DMA_FROMDEVICE);
			DEV_KFREE_SKB(pRxd->pMBuf);
			pRxd->pMBuf = NULL;
		}
		pRxd->RBControl &= RX_CTRL_OWN_BMU;
		pRxd = pRxd->pNextRxd;
		pRxPort->RxdRingFree++;
	} while (pRxd != pRxPort->pRxdRingTail);
	pRxPort->pRxdRingTail = pRxPort->pRxdRingHead;
	spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
} /* ClearRxRing */


/*****************************************************************************
 *
 *	ClearTxRing - remove all buffers from the transmit ring
 *
 * Description:
 *	This function removes all transmit buffers from the ring.
 *	The transmit BMU must be stopped before calling this function
 *	and transmitting at the upper level must be disabled.
 *	The BMU own bit of all descriptors is cleared, the rest is
 *	done by calling FreeTxDescriptors.
 *
 * Returns: N/A
 */
static void ClearTxRing(
SK_AC	*pAC,		/* pointer to adapter context */
TX_PORT	*pTxPort)	/* pointer to tx prt struct */
{
TXD		*pTxd;		/* pointer to the current descriptor */
int		i;
unsigned long	Flags;

	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
	pTxd = pTxPort->pTxdRingHead;
	for (i=0; i<pAC->TxDescrPerRing; i++) {
		pTxd->TBControl &= ~TX_CTRL_OWN_BMU;
		pTxd = pTxd->pNextTxd;
	}
	FreeTxDescriptors(pAC, pTxPort);
	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
} /* ClearTxRing */


#if 0
/*****************************************************************************
 *
 * 	SetQueueSizes - configure the sizes of rx and tx queues
 *
 * Description:
 *	This function assigns the sizes for active and passive port
 *	to the appropriate HWinit structure variables.
 *	The passive port(s) get standard values, all remaining RAM
 *	is given to the active port.
 *	The queue sizes are in kbyte and must be multiple of 8.
 *	The limits for the number of buffers filled into the rx rings
 *	is also set in this routine.
 *
 * Returns:
 *	none
 */
static void SetQueueSizes(
SK_AC	*pAC)	/* pointer to the adapter context */
{
int	StandbyRam;	/* adapter RAM used for a standby port */
int	RemainingRam;	/* adapter RAM available for the active port */
int	RxRam;		/* RAM used for the active port receive queue */
int	i;		/* loop counter */

if (pAC->RlmtNets == 1) {
	StandbyRam = SK_RLMT_STANDBY_QRXSIZE + SK_RLMT_STANDBY_QXASIZE +
		SK_RLMT_STANDBY_QXSSIZE;
	RemainingRam = pAC->GIni.GIRamSize -
		(pAC->GIni.GIMacsFound-1) * StandbyRam;
	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		pAC->GIni.GP[i].PRxQSize = SK_RLMT_STANDBY_QRXSIZE;
		pAC->GIni.GP[i].PXSQSize = SK_RLMT_STANDBY_QXSSIZE;
		pAC->GIni.GP[i].PXAQSize = SK_RLMT_STANDBY_QXASIZE;
	}
	RxRam = (RemainingRam * 8 / 10) & ~7;
	pAC->GIni.GP[pAC->ActivePort].PRxQSize = RxRam;
	pAC->GIni.GP[pAC->ActivePort].PXSQSize = 0;
	pAC->GIni.GP[pAC->ActivePort].PXAQSize =
		(RemainingRam - RxRam) & ~7;
	pAC->RxQueueSize = RxRam;
	pAC->TxSQueueSize = 0;
	pAC->TxAQueueSize = (RemainingRam - RxRam) & ~7;
	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("queue sizes settings - rx:%d  txA:%d txS:%d\n",
		pAC->RxQueueSize,pAC->TxAQueueSize, pAC->TxSQueueSize));
} else {
	RemainingRam = pAC->GIni.GIRamSize/pAC->GIni.GIMacsFound;
	RxRam = (RemainingRam * 8 / 10) & ~7;
	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		pAC->GIni.GP[i].PRxQSize = RxRam;
		pAC->GIni.GP[i].PXSQSize = 0;
		pAC->GIni.GP[i].PXAQSize = (RemainingRam - RxRam) & ~7;
	}

	pAC->RxQueueSize = RxRam;
	pAC->TxSQueueSize = 0;
	pAC->TxAQueueSize = (RemainingRam - RxRam) & ~7;
}
	for (i=0; i<SK_MAX_MACS; i++) {
		pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing;
	}

	if (pAC->RlmtNets == 2) {
		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 100;
		}
	} else {
		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 100;
		}
		/*
		 * Do not set the Limit to 0, because this could cause
		 * wrap around with ReQueue'ed buffers (a buffer could
		 * be requeued in the same position, made accessable to
		 * the hardware, and the hardware could change its
		 * contents!
		 */
		pAC->RxPort[pAC->ActivePort].RxFillLimit = 1;
	}

#ifdef DEBUG
	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
			("i: %d,  RxQSize: %d,  PXSQsize: %d, PXAQSize: %d\n",
			i,
			pAC->GIni.GP[i].PRxQSize,
			pAC->GIni.GP[i].PXSQSize,
			pAC->GIni.GP[i].PXAQSize));
	}
#endif
} /* SetQueueSizes */


/*****************************************************************************
 *
 * 	SkGeSetMacAddr - Set the hardware MAC address
 *
 * Description:
 *	This function sets the MAC address used by the adapter.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p)
{

DEV_NET *pNet = (DEV_NET*) dev->priv;
SK_AC	*pAC = pNet->pAC;

struct sockaddr	*addr = p;
unsigned long	Flags;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeSetMacAddr starts now...\n"));
	if(netif_running(dev))
		return -EBUSY;

	memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);

	spin_lock_irqsave(&pAC->SlowPathLock, Flags);

	if (pAC->RlmtNets == 2)
		SkAddrOverride(pAC, pAC->IoBase, pNet->NetNr,
			(SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);
	else
		SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort,
			(SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);


	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
	return 0;
} /* SkGeSetMacAddr */
#endif


/*****************************************************************************
 *
 * 	SkGeSetRxMode - set receive mode
 *
 * Description:
 *	This function sets the receive mode of an adapter. The adapter
 *	supports promiscuous mode, allmulticast mode and a number of
 *	multicast addresses. If more multicast addresses the available
 *	are selected, a hash function in the hardware is used.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
#if 0
static void SkGeSetRxMode(struct SK_NET_DEVICE *dev)
{

DEV_NET		*pNet;
SK_AC		*pAC;

struct dev_mc_list	*pMcList;
int			i;
int			PortIdx;
unsigned long		Flags;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeSetRxMode starts now... "));

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;
	if (pAC->RlmtNets == 1)
		PortIdx = pAC->ActivePort;
	else
		PortIdx = pNet->NetNr;

	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
	if (dev->flags & IFF_PROMISC) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
			("PROMISCUOUS mode\n"));
		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
			SK_PROM_MODE_LLC);
	} else if (dev->flags & IFF_ALLMULTI) {
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
			("ALLMULTI mode\n"));
		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
			SK_PROM_MODE_ALL_MC);
	} else {
		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
			SK_PROM_MODE_NONE);
		SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);

		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
			("Number of MC entries: %d ", dev->mc_count));

		pMcList = dev->mc_list;
		for (i=0; i<dev->mc_count; i++, pMcList = pMcList->next) {
			SkAddrMcAdd(pAC, pAC->IoBase, PortIdx,
				(SK_MAC_ADDR*)pMcList->dmi_addr, 0);
			SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_MCA,
				("%02x:%02x:%02x:%02x:%02x:%02x\n",
				pMcList->dmi_addr[0],
				pMcList->dmi_addr[1],
				pMcList->dmi_addr[2],
				pMcList->dmi_addr[3],
				pMcList->dmi_addr[4],
				pMcList->dmi_addr[5]));
		}
		SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx);
	}
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);

	return;
} /* SkGeSetRxMode */


/*****************************************************************************
 *
 * 	SkGeChangeMtu - set the MTU to another value
 *
 * Description:
 *	This function sets is called whenever the MTU size is changed
 *	(ifconfig mtu xxx dev ethX). If the MTU is bigger than standard
 *	ethernet MTU size, long frame support is activated.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu)
{
DEV_NET		*pNet;
DEV_NET		*pOtherNet;
SK_AC		*pAC;
unsigned long	Flags;
int		i;
SK_EVPARA 	EvPara;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeChangeMtu starts now...\n"));

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) {
		return -EINVAL;
	}

	if(pAC->BoardLevel != 2) {
		return -EINVAL;
	}

	pNet->Mtu = NewMtu;
	pOtherNet = (DEV_NET*)pAC->dev[1 - pNet->NetNr]->priv;
	if ((pOtherNet->Mtu > 1500) && (NewMtu <= 1500) && (pOtherNet->Up==1)) {
		return(0);
	}

	EvPara.Para32[0] = pNet->NetNr;
	EvPara.Para32[1] = -1;

	pAC->RxBufSize = NewMtu + 32;
	dev->mtu = NewMtu;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("New MTU: %d\n", NewMtu));

	/* prevent reconfiguration while changing the MTU */

	/* disable interrupts */
	SK_OUT32(pAC->IoBase, B0_IMSK, 0);
	spin_lock_irqsave(&pAC->SlowPathLock, Flags);

	/* Found more than one port */
	if ((pAC->GIni.GIMacsFound == 2 ) &&
		(pAC->RlmtNets == 2)) {
			/* Stop both ports */
			EvPara.Para32[0] = 0;
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
			EvPara.Para32[0] = 1;
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
	} else {
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
	}

	SkEventDispatcher(pAC, pAC->IoBase);

	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		spin_lock_irqsave(
			&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock, Flags);
		netif_stop_queue(pAC->dev[i]);

	}

	/*
	 * adjust number of rx buffers allocated
	 */
	if (NewMtu > 1500) {
		/* use less rx buffers */
		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
			/* Found more than one port */
			if ((pAC->GIni.GIMacsFound == 2 ) &&
				(pAC->RlmtNets == 2)) {
					pAC->RxPort[i].RxFillLimit =
						pAC->RxDescrPerRing - 100;
			} else {
				if (i == pAC->ActivePort)
					pAC->RxPort[i].RxFillLimit =
						pAC->RxDescrPerRing - 100;
				else
					pAC->RxPort[i].RxFillLimit =
						pAC->RxDescrPerRing - 10;
			}
		}
	}
	else {
		/* use normal amount of rx buffers */
		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
			/* Found more than one port */
			if ((pAC->GIni.GIMacsFound == 2 ) &&
				(pAC->RlmtNets == 2)) {
					pAC->RxPort[i].RxFillLimit = 1;
			} else {
				if (i == pAC->ActivePort)
					pAC->RxPort[i].RxFillLimit = 1;
				else
					pAC->RxPort[i].RxFillLimit =
						pAC->RxDescrPerRing - 100;
			}
		}
	}

	SkGeDeInit(pAC, pAC->IoBase);

	/*
	 * enable/disable hardware support for long frames
	 */
	if (NewMtu > 1500) {
/*		pAC->JumboActivated = SK_TRUE; /#* is never set back !!! */
		pAC->GIni.GIPortUsage = SK_JUMBO_LINK;
	}
	else {
		if ((pAC->GIni.GIMacsFound == 2 ) &&
			(pAC->RlmtNets == 2)) {
			pAC->GIni.GIPortUsage = SK_MUL_LINK;
		} else {
			pAC->GIni.GIPortUsage = SK_RED_LINK;
		}
	}

	SkGeInit(   pAC, pAC->IoBase, 1);
	SkI2cInit(  pAC, pAC->IoBase, 1);
	SkEventInit(pAC, pAC->IoBase, 1);
	SkPnmiInit( pAC, pAC->IoBase, 1);
	SkAddrInit( pAC, pAC->IoBase, 1);
	SkRlmtInit( pAC, pAC->IoBase, 1);
	SkTimerInit(pAC, pAC->IoBase, 1);

	/*
	 * tschilling:
	 * Speed and others are set back to default in level 1 init!
	 */
	GetConfiguration(pAC);

	SkGeInit(   pAC, pAC->IoBase, 2);
	SkI2cInit(  pAC, pAC->IoBase, 2);
	SkEventInit(pAC, pAC->IoBase, 2);
	SkPnmiInit( pAC, pAC->IoBase, 2);
	SkAddrInit( pAC, pAC->IoBase, 2);
	SkRlmtInit( pAC, pAC->IoBase, 2);
	SkTimerInit(pAC, pAC->IoBase, 2);

	/*
	 * clear and reinit the rx rings here
	 */
	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
		ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
		ClearRxRing(pAC, &pAC->RxPort[i]);
		FillRxRing(pAC, &pAC->RxPort[i]);

		/* Enable transmit descriptor polling. */
		SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
		FillRxRing(pAC, &pAC->RxPort[i]);
	};

	SkGeYellowLED(pAC, pAC->IoBase, 1);

#ifdef USE_INT_MOD
	{
		unsigned long ModBase;
		ModBase = 53125000 / INTS_PER_SEC;
		SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
		SK_OUT32(pAC->IoBase, B2_IRQM_MSK, IRQ_MOD_MASK);
		SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
	}
#endif

	netif_start_queue(pAC->dev[pNet->PortNr]);
	for (i=pAC->GIni.GIMacsFound-1; i>=0; i--) {
		spin_unlock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock);
	}

	/* enable Interrupts */
	SK_OUT32(pAC->IoBase, B0_IMSK, IRQ_MASK);
	SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);

	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
	SkEventDispatcher(pAC, pAC->IoBase);

	/* Found more than one port */
	if ((pAC->GIni.GIMacsFound == 2 ) &&
		(pAC->RlmtNets == 2)) {
			/* Start both ports */
			EvPara.Para32[0] = pAC->RlmtNets;
			EvPara.Para32[1] = -1;
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS,
				EvPara);


			EvPara.Para32[1] = -1;
			EvPara.Para32[0] = pNet->PortNr;
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);

			if (pOtherNet->Up) {
				EvPara.Para32[0] = pOtherNet->PortNr;
				SkEventQueue(pAC, SKGE_RLMT,
					SK_RLMT_START, EvPara);
			}
	} else {
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
	}

	SkEventDispatcher(pAC, pAC->IoBase);
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);

	return 0;
} /* SkGeChangeMtu */


/*****************************************************************************
 *
 * 	SkGeStats - return ethernet device statistics
 *
 * Description:
 *	This function return statistic data about the ethernet device
 *	to the operating system.
 *
 * Returns:
 *	pointer to the statistic structure.
 */
static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev)
{
DEV_NET *pNet = (DEV_NET*) dev->priv;
SK_AC	*pAC = pNet->pAC;
SK_PNMI_STRUCT_DATA *pPnmiStruct;       /* structure for all Pnmi-Data */
SK_PNMI_STAT    *pPnmiStat;             /* pointer to virtual XMAC stat. data */
SK_PNMI_CONF    *pPnmiConf;             /* pointer to virtual link config. */
unsigned int    Size;                   /* size of pnmi struct */
unsigned long	Flags;			/* for spin lock */

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeStats starts now...\n"));
	pPnmiStruct = &pAC->PnmiStruct;
	memset(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA));
	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
	Size = SK_PNMI_STRUCT_SIZE;
		SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr);
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
	pPnmiStat = &pPnmiStruct->Stat[0];
	pPnmiConf = &pPnmiStruct->Conf[0];

	pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF;
	pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF;
	pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts;
	pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts;

	if (pNet->Mtu <= 1500) {
		pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF;
	} else {
		pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts -
			pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF);
	}


	if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12)
		pAC->stats.rx_errors = pAC->stats.rx_errors - pPnmiStat->StatRxShortsCts;

	pAC->stats.tx_errors = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;
	pAC->stats.rx_dropped = (SK_U32) pPnmiStruct->RxNoBufCts & 0xFFFFFFFF;
	pAC->stats.tx_dropped = (SK_U32) pPnmiStruct->TxNoBufCts & 0xFFFFFFFF;
	pAC->stats.multicast = (SK_U32) pPnmiStat->StatRxMulticastOkCts & 0xFFFFFFFF;
	pAC->stats.collisions = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;

	/* detailed rx_errors: */
	pAC->stats.rx_length_errors = (SK_U32) pPnmiStat->StatRxRuntCts & 0xFFFFFFFF;
	pAC->stats.rx_over_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
	pAC->stats.rx_crc_errors = (SK_U32) pPnmiStat->StatRxFcsCts & 0xFFFFFFFF;
	pAC->stats.rx_frame_errors = (SK_U32) pPnmiStat->StatRxFramingCts & 0xFFFFFFFF;
	pAC->stats.rx_fifo_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
	pAC->stats.rx_missed_errors = (SK_U32) pPnmiStat->StatRxMissedCts & 0xFFFFFFFF;

	/* detailed tx_errors */
	pAC->stats.tx_aborted_errors = (SK_U32) 0;
	pAC->stats.tx_carrier_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
	pAC->stats.tx_fifo_errors = (SK_U32) pPnmiStat->StatTxFifoUnderrunCts & 0xFFFFFFFF;
	pAC->stats.tx_heartbeat_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
	pAC->stats.tx_window_errors = (SK_U32) 0;

	return(&pAC->stats);
} /* SkGeStats */


/*****************************************************************************
 *
 * 	SkGeIoctl - IO-control function
 *
 * Description:
 *	This function is called if an ioctl is issued on the device.
 *	There are three subfunction for reading, writing and test-writing
 *	the private MIB data structure (usefull for SysKonnect-internal tools).
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd)
{
DEV_NET		*pNet;
SK_AC		*pAC;

SK_GE_IOCTL	Ioctl;
unsigned int	Err = 0;
int		Size;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeIoctl starts now...\n"));

	pNet = (DEV_NET*) dev->priv;
	pAC = pNet->pAC;

	if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) {
		return -EFAULT;
	}

	switch(cmd) {
	case SK_IOCTL_SETMIB:
	case SK_IOCTL_PRESETMIB:
		if (!capable(CAP_NET_ADMIN)) return -EPERM;
	case SK_IOCTL_GETMIB:
		if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData,
			Ioctl.Len<sizeof(pAC->PnmiStruct)?
			Ioctl.Len : sizeof(pAC->PnmiStruct))) {
			return -EFAULT;
		}
		Size = SkGeIocMib(pNet, Ioctl.Len, cmd);
		if(copy_to_user(Ioctl.pData, &pAC->PnmiStruct,
			Ioctl.Len<Size? Ioctl.Len : Size)) {
			return -EFAULT;
		}
		Ioctl.Len = Size;
		if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
			return -EFAULT;
		}
		break;
	default:
		Err = -EOPNOTSUPP;
	}
	return(Err);
} /* SkGeIoctl */


/*****************************************************************************
 *
 * 	SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
 *
 * Description:
 *	This function reads/writes the MIB data using PNMI (Private Network
 *	Management Interface).
 *	The destination for the data must be provided with the
 *	ioctl call and is given to the driver in the form of
 *	a user space address.
 *	Copying from the user-provided data area into kernel messages
 *	and back is done by copy_from_user and copy_to_user calls in
 *	SkGeIoctl.
 *
 * Returns:
 *	returned size from PNMI call
 */
static int SkGeIocMib(
DEV_NET		*pNet,	/* pointer to the adapter context */
unsigned int	Size,	/* length of ioctl data */
int		mode)	/* flag for set/preset */
{
unsigned long	Flags;	/* for spin lock */
SK_AC		*pAC;

	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("SkGeIocMib starts now...\n"));
	pAC = pNet->pAC;
	/* access MIB */
	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
	switch(mode) {
	case SK_IOCTL_GETMIB:
		SkPnmiGetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
			pNet->NetNr);
		break;
	case SK_IOCTL_PRESETMIB:
		SkPnmiPreSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
			pNet->NetNr);
		break;
	case SK_IOCTL_SETMIB:
		SkPnmiSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
			pNet->NetNr);
		break;
	default:
		break;
	}
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
		("MIB data access succeeded\n"));
	return (Size);
} /* SkGeIocMib */
#endif


/*****************************************************************************
 *
 * 	GetConfiguration - read configuration information
 *
 * Description:
 *	This function reads per-adapter configuration information from
 *	the options provided on the command line.
 *
 * Returns:
 *	none
 */
static void GetConfiguration(
SK_AC	*pAC)	/* pointer to the adapter context structure */
{
SK_I32	Port;		/* preferred port */
int	LinkSpeed;	/* Link speed */
int	AutoNeg;	/* auto negotiation off (0) or on (1) */
int	DuplexCap;	/* duplex capabilities (0=both, 1=full, 2=half */
int	MSMode;		/* master / slave mode selection */
SK_BOOL	AutoSet;
SK_BOOL DupSet;
/*
 *	The two parameters AutoNeg. and DuplexCap. map to one configuration
 *	parameter. The mapping is described by this table:
 *	DuplexCap ->	|	both	|	full	|	half	|
 *	AutoNeg		|		|		|		|
 *	-----------------------------------------------------------------
 *	Off		|    illegal	|	Full	|	Half	|
 *	-----------------------------------------------------------------
 *	On		|   AutoBoth	|   AutoFull	|   AutoHalf	|
 *	-----------------------------------------------------------------
 *	Sense		|   AutoSense	|   AutoSense	|   AutoSense	|
 */
int	Capabilities[3][3] =
		{ {		  -1, SK_LMODE_FULL,     SK_LMODE_HALF},
		  {SK_LMODE_AUTOBOTH, SK_LMODE_AUTOFULL, SK_LMODE_AUTOHALF},
		  {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} };
#define DC_BOTH	0
#define DC_FULL 1
#define DC_HALF 2
#define AN_OFF	0
#define AN_ON	1
#define AN_SENS	2

	/* settings for port A */
	/* settings link speed */
	LinkSpeed = SK_LSPEED_AUTO; 	/* default: do auto select */
	if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		Speed_A[pAC->Index] != NULL) {
		if (strcmp(Speed_A[pAC->Index],"")==0) {
			LinkSpeed = SK_LSPEED_AUTO;
		}
		else if (strcmp(Speed_A[pAC->Index],"Auto")==0) {
			LinkSpeed = SK_LSPEED_AUTO;
		}
		else if (strcmp(Speed_A[pAC->Index],"10")==0) {
			LinkSpeed = SK_LSPEED_10MBPS;
		}
		else if (strcmp(Speed_A[pAC->Index],"100")==0) {
			LinkSpeed = SK_LSPEED_100MBPS;
		}
		else if (strcmp(Speed_A[pAC->Index],"1000")==0) {
			LinkSpeed = SK_LSPEED_1000MBPS;
		}
		else printk("%s: Illegal value for Speed_A\n",
			pAC->dev[0]->name);
	}

	/* Check speed parameter */
	/* Only copper type adapter and GE V2 cards */
	if (((pAC->GIni.GIChipId != CHIP_ID_YUKON) ||
		(pAC->GIni.GICopperType != SK_TRUE)) &&
		((LinkSpeed != SK_LSPEED_AUTO) &&
		(LinkSpeed != SK_LSPEED_1000MBPS))) {
		printk("%s: Illegal value for Speed_A. "
			"Not a copper card or GE V2 card\n    Using "
			"speed 1000\n", pAC->dev[0]->name);
		LinkSpeed = SK_LSPEED_1000MBPS;
	}
	pAC->GIni.GP[0].PLinkSpeed = LinkSpeed;

	/* Autonegotiation */
	AutoNeg = AN_ON; /* tschilling: Default: Autonegotiation on! */
	AutoSet = SK_FALSE;
	if (AutoNeg_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		AutoNeg_A[pAC->Index] != NULL) {
		AutoSet = SK_TRUE;
		if (strcmp(AutoNeg_A[pAC->Index],"")==0) {
			AutoSet = SK_FALSE;
		}
		else if (strcmp(AutoNeg_A[pAC->Index],"On")==0) {
			AutoNeg = AN_ON;
		}
		else if (strcmp(AutoNeg_A[pAC->Index],"Off")==0) {
			AutoNeg = AN_OFF;
		}
		else if (strcmp(AutoNeg_A[pAC->Index],"Sense")==0) {
			AutoNeg = AN_SENS;
		}
		else printk("%s: Illegal value for AutoNeg_A\n",
			pAC->dev[0]->name);
	}

	DuplexCap = DC_BOTH;
	DupSet = SK_FALSE;
	if (DupCap_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		DupCap_A[pAC->Index] != NULL) {
		DupSet = SK_TRUE;
		if (strcmp(DupCap_A[pAC->Index],"")==0) {
			DupSet = SK_FALSE;
		}
		else if (strcmp(DupCap_A[pAC->Index],"Both")==0) {
			DuplexCap = DC_BOTH;
		}
		else if (strcmp(DupCap_A[pAC->Index],"Full")==0) {
			DuplexCap = DC_FULL;
		}
		else if (strcmp(DupCap_A[pAC->Index],"Half")==0) {
			DuplexCap = DC_HALF;
		}
		else printk("%s: Illegal value for DupCap_A\n",
			pAC->dev[0]->name);
	}

	/* check for illegal combinations */
	if (AutoSet && AutoNeg==AN_SENS && DupSet) {
		printk("%s, Port A: DuplexCapabilities"
			" ignored using Sense mode\n", pAC->dev[0]->name);
	}
	if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
		printk("%s, Port A: Illegal combination"
			" of values AutoNeg. and DuplexCap.\n    Using "
			"Full Duplex\n", pAC->dev[0]->name);

		DuplexCap = DC_FULL;
	}
	if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
		DuplexCap = DC_FULL;
	}

	if (!AutoSet && DupSet) {
		printk("%s, Port A: Duplex setting not"
			" possible in\n    default AutoNegotiation mode"
			" (Sense).\n    Using AutoNegotiation On\n",
			pAC->dev[0]->name);
		AutoNeg = AN_ON;
	}

	/* set the desired mode */
	pAC->GIni.GP[0].PLinkModeConf =
		Capabilities[AutoNeg][DuplexCap];

	pAC->GIni.GP[0].PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
	if (FlowCtrl_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		FlowCtrl_A[pAC->Index] != NULL) {
		if (strcmp(FlowCtrl_A[pAC->Index],"") == 0) {
		}
		else if (strcmp(FlowCtrl_A[pAC->Index],"SymOrRem") == 0) {
			pAC->GIni.GP[0].PFlowCtrlMode =
				SK_FLOW_MODE_SYM_OR_REM;
		}
		else if (strcmp(FlowCtrl_A[pAC->Index],"Sym")==0) {
			pAC->GIni.GP[0].PFlowCtrlMode =
				SK_FLOW_MODE_SYMMETRIC;
		}
		else if (strcmp(FlowCtrl_A[pAC->Index],"LocSend")==0) {
			pAC->GIni.GP[0].PFlowCtrlMode =
				SK_FLOW_MODE_LOC_SEND;
		}
		else if (strcmp(FlowCtrl_A[pAC->Index],"None")==0) {
			pAC->GIni.GP[0].PFlowCtrlMode =
				SK_FLOW_MODE_NONE;
		}
		else printk("Illegal value for FlowCtrl_A\n");
	}
	if (AutoNeg==AN_OFF && pAC->GIni.GP[0].PFlowCtrlMode!=
		SK_FLOW_MODE_NONE) {
		printk("%s, Port A: FlowControl"
			" impossible without AutoNegotiation,"
			" disabled\n", pAC->dev[0]->name);
		pAC->GIni.GP[0].PFlowCtrlMode = SK_FLOW_MODE_NONE;
	}

	MSMode = SK_MS_MODE_AUTO; /* default: do auto select */
	if (Role_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		Role_A[pAC->Index] != NULL) {
		if (strcmp(Role_A[pAC->Index],"")==0) {
		}
		else if (strcmp(Role_A[pAC->Index],"Auto")==0) {
			MSMode = SK_MS_MODE_AUTO;
		}
		else if (strcmp(Role_A[pAC->Index],"Master")==0) {
			MSMode = SK_MS_MODE_MASTER;
		}
		else if (strcmp(Role_A[pAC->Index],"Slave")==0) {
			MSMode = SK_MS_MODE_SLAVE;
		}
		else printk("%s: Illegal value for Role_A\n",
			pAC->dev[0]->name);
	}
	pAC->GIni.GP[0].PMSMode = MSMode;


	/* settings for port B */
	/* settings link speed */
	LinkSpeed = SK_LSPEED_AUTO; 	/* default: do auto select */
	if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		Speed_B[pAC->Index] != NULL) {
		if (strcmp(Speed_B[pAC->Index],"")==0) {
			LinkSpeed = SK_LSPEED_AUTO;
		}
		else if (strcmp(Speed_B[pAC->Index],"Auto")==0) {
			LinkSpeed = SK_LSPEED_AUTO;
		}
		else if (strcmp(Speed_B[pAC->Index],"10")==0) {
			LinkSpeed = SK_LSPEED_10MBPS;
		}
		else if (strcmp(Speed_B[pAC->Index],"100")==0) {
			LinkSpeed = SK_LSPEED_100MBPS;
		}
		else if (strcmp(Speed_B[pAC->Index],"1000")==0) {
			LinkSpeed = SK_LSPEED_1000MBPS;
		}
		else printk("%s: Illegal value for Speed_B\n",
			pAC->dev[1]->name);
	}

	/* Check speed parameter */
	/* Only copper type adapter and GE V2 cards */
	if (((pAC->GIni.GIChipId != CHIP_ID_YUKON) ||
		(pAC->GIni.GICopperType != SK_TRUE)) &&
		((LinkSpeed != SK_LSPEED_AUTO) &&
		(LinkSpeed != SK_LSPEED_1000MBPS))) {
		printk("%s: Illegal value for Speed_B. "
			"Not a copper card or GE V2 card\n    Using "
			"speed 1000\n", pAC->dev[1]->name);
		LinkSpeed = SK_LSPEED_1000MBPS;
	}
	pAC->GIni.GP[1].PLinkSpeed = LinkSpeed;

	/* Auto negotiation */
	AutoNeg = AN_SENS; /* default: do auto Sense */
	AutoSet = SK_FALSE;
	if (AutoNeg_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		AutoNeg_B[pAC->Index] != NULL) {
		AutoSet = SK_TRUE;
		if (strcmp(AutoNeg_B[pAC->Index],"")==0) {
			AutoSet = SK_FALSE;
		}
		else if (strcmp(AutoNeg_B[pAC->Index],"On")==0) {
			AutoNeg = AN_ON;
		}
		else if (strcmp(AutoNeg_B[pAC->Index],"Off")==0) {
			AutoNeg = AN_OFF;
		}
		else if (strcmp(AutoNeg_B[pAC->Index],"Sense")==0) {
			AutoNeg = AN_SENS;
		}
		else printk("Illegal value for AutoNeg_B\n");
	}

	DuplexCap = DC_BOTH;
	DupSet = SK_FALSE;
	if (DupCap_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		DupCap_B[pAC->Index] != NULL) {
		DupSet = SK_TRUE;
		if (strcmp(DupCap_B[pAC->Index],"")==0) {
			DupSet = SK_FALSE;
		}
		else if (strcmp(DupCap_B[pAC->Index],"Both")==0) {
			DuplexCap = DC_BOTH;
		}
		else if (strcmp(DupCap_B[pAC->Index],"Full")==0) {
			DuplexCap = DC_FULL;
		}
		else if (strcmp(DupCap_B[pAC->Index],"Half")==0) {
			DuplexCap = DC_HALF;
		}
		else printk("Illegal value for DupCap_B\n");
	}

	/* check for illegal combinations */
	if (AutoSet && AutoNeg==AN_SENS && DupSet) {
		printk("%s, Port B: DuplexCapabilities"
			" ignored using Sense mode\n", pAC->dev[1]->name);
	}
	if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
		printk("%s, Port B: Illegal combination"
			" of values AutoNeg. and DuplexCap.\n    Using "
			"Full Duplex\n", pAC->dev[1]->name);

		DuplexCap = DC_FULL;
	}
	if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
		DuplexCap = DC_FULL;
	}

	if (!AutoSet && DupSet) {
		printk("%s, Port B: Duplex setting not"
			" possible in\n    default AutoNegotiation mode"
			" (Sense).\n    Using AutoNegotiation On\n",
			pAC->dev[1]->name);
		AutoNeg = AN_ON;
	}

	/* set the desired mode */
	pAC->GIni.GP[1].PLinkModeConf =
		Capabilities[AutoNeg][DuplexCap];

	pAC->GIni.GP[1].PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
	if (FlowCtrl_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		FlowCtrl_B[pAC->Index] != NULL) {
		if (strcmp(FlowCtrl_B[pAC->Index],"") == 0) {
		}
		else if (strcmp(FlowCtrl_B[pAC->Index],"SymOrRem") == 0) {
			pAC->GIni.GP[1].PFlowCtrlMode =
				SK_FLOW_MODE_SYM_OR_REM;
		}
		else if (strcmp(FlowCtrl_B[pAC->Index],"Sym")==0) {
			pAC->GIni.GP[1].PFlowCtrlMode =
				SK_FLOW_MODE_SYMMETRIC;
		}
		else if (strcmp(FlowCtrl_B[pAC->Index],"LocSend")==0) {
			pAC->GIni.GP[1].PFlowCtrlMode =
				SK_FLOW_MODE_LOC_SEND;
		}
		else if (strcmp(FlowCtrl_B[pAC->Index],"None")==0) {
			pAC->GIni.GP[1].PFlowCtrlMode =
				SK_FLOW_MODE_NONE;
		}
		else printk("Illegal value for FlowCtrl_B\n");
	}
	if (AutoNeg==AN_OFF && pAC->GIni.GP[1].PFlowCtrlMode!=
		SK_FLOW_MODE_NONE) {
		printk("%s, Port B: FlowControl"
			" impossible without AutoNegotiation,"
			" disabled\n", pAC->dev[1]->name);
		pAC->GIni.GP[1].PFlowCtrlMode = SK_FLOW_MODE_NONE;
	}

	MSMode = SK_MS_MODE_AUTO; /* default: do auto select */
	if (Role_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		Role_B[pAC->Index] != NULL) {
		if (strcmp(Role_B[pAC->Index],"")==0) {
		}
		else if (strcmp(Role_B[pAC->Index],"Auto")==0) {
			MSMode = SK_MS_MODE_AUTO;
		}
		else if (strcmp(Role_B[pAC->Index],"Master")==0) {
			MSMode = SK_MS_MODE_MASTER;
		}
		else if (strcmp(Role_B[pAC->Index],"Slave")==0) {
			MSMode = SK_MS_MODE_SLAVE;
		}
		else printk("%s: Illegal value for Role_B\n",
			pAC->dev[1]->name);
	}
	pAC->GIni.GP[1].PMSMode = MSMode;


	/* settings for both ports */
	pAC->ActivePort = 0;
	if (PrefPort != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		PrefPort[pAC->Index] != NULL) {
		if (strcmp(PrefPort[pAC->Index],"") == 0) { /* Auto */
			pAC->ActivePort = 0;
			pAC->Rlmt.Net[0].Preference = -1; /* auto */
			pAC->Rlmt.Net[0].PrefPort = 0;
		}
		else if (strcmp(PrefPort[pAC->Index],"A") == 0) {
			/*
			 * do not set ActivePort here, thus a port
			 * switch is issued after net up.
			 */
			Port = 0;
			pAC->Rlmt.Net[0].Preference = Port;
			pAC->Rlmt.Net[0].PrefPort = Port;
		}
		else if (strcmp(PrefPort[pAC->Index],"B") == 0) {
			/*
			 * do not set ActivePort here, thus a port
			 * switch is issued after net up.
			 */
			Port = 1;
			pAC->Rlmt.Net[0].Preference = Port;
			pAC->Rlmt.Net[0].PrefPort = Port;
		}
		else printk("%s: Illegal value for PrefPort\n",
			pAC->dev[0]->name);
	}

	pAC->RlmtNets = 1;

	if (RlmtMode != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
		RlmtMode[pAC->Index] != NULL) {
		if (strcmp(RlmtMode[pAC->Index], "") == 0) {
			pAC->RlmtMode = 0;
		}
		else if (strcmp(RlmtMode[pAC->Index], "CheckLinkState") == 0) {
			pAC->RlmtMode = SK_RLMT_CHECK_LINK;
		}
		else if (strcmp(RlmtMode[pAC->Index], "CheckLocalPort") == 0) {
			pAC->RlmtMode = SK_RLMT_CHECK_LINK |
				SK_RLMT_CHECK_LOC_LINK;
		}
		else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) {
			pAC->RlmtMode = SK_RLMT_CHECK_LINK |
				SK_RLMT_CHECK_LOC_LINK |
				SK_RLMT_CHECK_SEG;
		}
		else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) &&
			(pAC->GIni.GIMacsFound == 2)) {
				pAC->RlmtMode = SK_RLMT_CHECK_LINK;
				pAC->RlmtNets = 2;
		}
		else {
			printk("%s: Illegal value for"
				" RlmtMode, using default\n", pAC->dev[0]->name);
			pAC->RlmtMode = 0;
		}
	}
	else {
		pAC->RlmtMode = 0;
	}
} /* GetConfiguration */


/*****************************************************************************
 *
 * 	ProductStr - return a adapter identification string from vpd
 *
 * Description:
 *	This function reads the product name string from the vpd area
 *	and puts it the field pAC->DeviceString.
 *
 * Returns: N/A
 */
static void ProductStr(
SK_AC	*pAC		/* pointer to adapter context */
)
{
int	StrLen = 80;		/* length of the string, defined in SK_AC */
char	Keyword[] = VPD_NAME;	/* vpd productname identifier */
int	ReturnCode;		/* return code from vpd_read */
unsigned long Flags;

	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
	ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, pAC->DeviceStr,
		&StrLen);
	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
	if (ReturnCode != 0) {
		/* there was an error reading the vpd data */
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
			("Error reading VPD data: %d\n", ReturnCode));
		pAC->DeviceStr[0] = '\0';
	}
} /* ProductStr */


/****************************************************************************/
/* functions for common modules *********************************************/
/****************************************************************************/


/*****************************************************************************
 *
 *	SkDrvAllocRlmtMbuf - allocate an RLMT mbuf
 *
 * Description:
 *	This routine returns an RLMT mbuf or NULL. The RLMT Mbuf structure
 *	is embedded into a socket buff data area.
 *
 * Context:
 *	runtime
 *
 * Returns:
 *	NULL or pointer to Mbuf.
 */
SK_MBUF *SkDrvAllocRlmtMbuf(
SK_AC		*pAC,		/* pointer to adapter context */
SK_IOC		IoC,		/* the IO-context */
unsigned	BufferSize)	/* size of the requested buffer */
{
SK_MBUF		*pRlmtMbuf;	/* pointer to a new rlmt-mbuf structure */
struct sk_buff	*pMsgBlock;	/* pointer to a new message block */

	pMsgBlock = alloc_skb(BufferSize + sizeof(SK_MBUF), GFP_ATOMIC);
	if (pMsgBlock == NULL) {
		return (NULL);
	}
	pRlmtMbuf = (SK_MBUF*) pMsgBlock->data;
	skb_reserve(pMsgBlock, sizeof(SK_MBUF));
	pRlmtMbuf->pNext = NULL;
	pRlmtMbuf->pOs = pMsgBlock;
	pRlmtMbuf->pData = pMsgBlock->data;	/* Data buffer. */
	pRlmtMbuf->Size = BufferSize;		/* Data buffer size. */
	pRlmtMbuf->Length = 0;		/* Length of packet (<= Size). */
	return (pRlmtMbuf);

} /* SkDrvAllocRlmtMbuf */


/*****************************************************************************
 *
 *	SkDrvFreeRlmtMbuf - free an RLMT mbuf
 *
 * Description:
 *	This routine frees one or more RLMT mbuf(s).
 *
 * Context:
 *	runtime
 *
 * Returns:
 *	Nothing
 */
void  SkDrvFreeRlmtMbuf(
SK_AC		*pAC,		/* pointer to adapter context */
SK_IOC		IoC,		/* the IO-context */
SK_MBUF		*pMbuf)		/* size of the requested buffer */
{
SK_MBUF		*pFreeMbuf;
SK_MBUF		*pNextMbuf;

	pFreeMbuf = pMbuf;
	do {
		pNextMbuf = pFreeMbuf->pNext;
		DEV_KFREE_SKB_ANY(pFreeMbuf->pOs);
		pFreeMbuf = pNextMbuf;
	} while ( pFreeMbuf != NULL );
} /* SkDrvFreeRlmtMbuf */


/*****************************************************************************
 *
 *	SkOsGetTime - provide a time value
 *
 * Description:
 *	This routine provides a time value. The unit is 1/HZ (defined by Linux).
 *	It is not used for absolute time, but only for time differences.
 *
 *
 * Returns:
 *	Time value
 */
SK_U64 SkOsGetTime(SK_AC *pAC)
{
#if 0
	return jiffies;
#else
	return get_timer(0);
#endif
} /* SkOsGetTime */


/*****************************************************************************
 *
 *	SkPciReadCfgDWord - read a 32 bit value from pci config space
 *
 * Description:
 *	This routine reads a 32 bit value from the pci configuration
 *	space.
 *
 * Returns:
 *	0 - indicate everything worked ok.
 *	!= 0 - error indication
 */
int SkPciReadCfgDWord(
SK_AC *pAC,		/* Adapter Control structure pointer */
int PciAddr,		/* PCI register address */
SK_U32 *pVal)		/* pointer to store the read value */
{
	pci_read_config_dword(pAC->PciDev, PciAddr, pVal);
	return(0);
} /* SkPciReadCfgDWord */


/*****************************************************************************
 *
 *	SkPciReadCfgWord - read a 16 bit value from pci config space
 *
 * Description:
 *	This routine reads a 16 bit value from the pci configuration
 *	space.
 *
 * Returns:
 *	0 - indicate everything worked ok.
 *	!= 0 - error indication
 */
int SkPciReadCfgWord(
SK_AC *pAC,	/* Adapter Control structure pointer */
int PciAddr,		/* PCI register address */
SK_U16 *pVal)		/* pointer to store the read value */
{
	pci_read_config_word(pAC->PciDev, PciAddr, pVal);
	return(0);
} /* SkPciReadCfgWord */


/*****************************************************************************
 *
 *	SkPciReadCfgByte - read a 8 bit value from pci config space
 *
 * Description:
 *	This routine reads a 8 bit value from the pci configuration
 *	space.
 *
 * Returns:
 *	0 - indicate everything worked ok.
 *	!= 0 - error indication
 */
int SkPciReadCfgByte(
SK_AC *pAC,	/* Adapter Control structure pointer */
int PciAddr,		/* PCI register address */
SK_U8 *pVal)		/* pointer to store the read value */
{
	pci_read_config_byte(pAC->PciDev, PciAddr, pVal);
	return(0);
} /* SkPciReadCfgByte */


/*****************************************************************************
 *
 *	SkPciWriteCfgDWord - write a 32 bit value to pci config space
 *
 * Description:
 *	This routine writes a 32 bit value to the pci configuration
 *	space.
 *
 * Returns:
 *	0 - indicate everything worked ok.
 *	!= 0 - error indication
 */
int SkPciWriteCfgDWord(
SK_AC *pAC,	/* Adapter Control structure pointer */
int PciAddr,		/* PCI register address */
SK_U32 Val)		/* pointer to store the read value */
{
	pci_write_config_dword(pAC->PciDev, PciAddr, Val);
	return(0);
} /* SkPciWriteCfgDWord */


/*****************************************************************************
 *
 *	SkPciWriteCfgWord - write a 16 bit value to pci config space
 *
 * Description:
 *	This routine writes a 16 bit value to the pci configuration
 *	space. The flag PciConfigUp indicates whether the config space
 *	is accesible or must be set up first.
 *
 * Returns:
 *	0 - indicate everything worked ok.
 *	!= 0 - error indication
 */
int SkPciWriteCfgWord(
SK_AC *pAC,	/* Adapter Control structure pointer */
int PciAddr,		/* PCI register address */
SK_U16 Val)		/* pointer to store the read value */
{
	pci_write_config_word(pAC->PciDev, PciAddr, Val);
	return(0);
} /* SkPciWriteCfgWord */


/*****************************************************************************
 *
 *	SkPciWriteCfgWord - write a 8 bit value to pci config space
 *
 * Description:
 *	This routine writes a 8 bit value to the pci configuration
 *	space. The flag PciConfigUp indicates whether the config space
 *	is accesible or must be set up first.
 *
 * Returns:
 *	0 - indicate everything worked ok.
 *	!= 0 - error indication
 */
int SkPciWriteCfgByte(
SK_AC *pAC,	/* Adapter Control structure pointer */
int PciAddr,		/* PCI register address */
SK_U8 Val)		/* pointer to store the read value */
{
	pci_write_config_byte(pAC->PciDev, PciAddr, Val);
	return(0);
} /* SkPciWriteCfgByte */


/*****************************************************************************
 *
 *	SkDrvEvent - handle driver events
 *
 * Description:
 *	This function handles events from all modules directed to the driver
 *
 * Context:
 *	Is called under protection of slow path lock.
 *
 * Returns:
 *	0 if everything ok
 *	< 0  on error
 *
 */
int SkDrvEvent(
SK_AC *pAC,		/* pointer to adapter context */
SK_IOC IoC,		/* io-context */
SK_U32 Event,		/* event-id */
SK_EVPARA Param)	/* event-parameter */
{
SK_MBUF		*pRlmtMbuf;	/* pointer to a rlmt-mbuf structure */
struct sk_buff	*pMsg;		/* pointer to a message block */
int		FromPort;	/* the port from which we switch away */
int		ToPort;		/* the port we switch to */
SK_EVPARA	NewPara;	/* parameter for further events */
#if 0
int		Stat;
#endif
unsigned long	Flags;
SK_BOOL		DualNet;

	switch (Event) {
	case SK_DRV_ADAP_FAIL:
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("ADAPTER FAIL EVENT\n"));
		printk("%s: Adapter failed.\n", pAC->dev[0]->name);
		/* disable interrupts */
		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
		/* cgoos */
		break;
	case SK_DRV_PORT_FAIL:
		FromPort = Param.Para32[0];
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("PORT FAIL EVENT, Port: %d\n", FromPort));
		if (FromPort == 0) {
			printk("%s: Port A failed.\n", pAC->dev[0]->name);
		} else {
			printk("%s: Port B failed.\n", pAC->dev[1]->name);
		}
		/* cgoos */
		break;
	case SK_DRV_PORT_RESET:	 /* SK_U32 PortIdx */
		/* action list 4 */
		FromPort = Param.Para32[0];
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("PORT RESET EVENT, Port: %d ", FromPort));
		NewPara.Para64 = FromPort;
		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
		spin_lock_irqsave(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);
		SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST);
#if 0
		pAC->dev[Param.Para32[0]]->flags &= ~IFF_RUNNING;
#endif
		spin_unlock_irqrestore(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);

		/* clear rx ring from received frames */
		ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE);

		ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
		spin_lock_irqsave(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);

		/* tschilling: Handling of return value inserted. */
		if (SkGeInitPort(pAC, IoC, FromPort)) {
			if (FromPort == 0) {
				printk("%s: SkGeInitPort A failed.\n", pAC->dev[0]->name);
			} else {
				printk("%s: SkGeInitPort B failed.\n", pAC->dev[1]->name);
			}
		}
		SkAddrMcUpdate(pAC,IoC, FromPort);
		PortReInitBmu(pAC, FromPort);
		SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
		ClearAndStartRx(pAC, FromPort);
		spin_unlock_irqrestore(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);
		break;
	case SK_DRV_NET_UP:	 /* SK_U32 PortIdx */
		/* action list 5 */
		FromPort = Param.Para32[0];
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("NET UP EVENT, Port: %d ", Param.Para32[0]));
#ifdef SK98_INFO
		printk("%s: network connection up using"
			" port %c\n", pAC->dev[Param.Para32[0]]->name, 'A'+Param.Para32[0]);

		/* tschilling: Values changed according to LinkSpeedUsed. */
		Stat = pAC->GIni.GP[FromPort].PLinkSpeedUsed;
		if (Stat == SK_LSPEED_STAT_10MBPS) {
			printk("    speed:           10\n");
		} else if (Stat == SK_LSPEED_STAT_100MBPS) {
			printk("    speed:           100\n");
		} else if (Stat == SK_LSPEED_STAT_1000MBPS) {
			printk("    speed:           1000\n");
		} else {
			printk("    speed:           unknown\n");
		}

		Stat = pAC->GIni.GP[FromPort].PLinkModeStatus;
		if (Stat == SK_LMODE_STAT_AUTOHALF ||
			Stat == SK_LMODE_STAT_AUTOFULL) {
			printk("    autonegotiation: yes\n");
		}
		else {
			printk("    autonegotiation: no\n");
		}
		if (Stat == SK_LMODE_STAT_AUTOHALF ||
			Stat == SK_LMODE_STAT_HALF) {
			printk("    duplex mode:     half\n");
		}
		else {
			printk("    duplex mode:     full\n");
		}
		Stat = pAC->GIni.GP[FromPort].PFlowCtrlStatus;
		if (Stat == SK_FLOW_STAT_REM_SEND ) {
			printk("    flowctrl:        remote send\n");
		}
		else if (Stat == SK_FLOW_STAT_LOC_SEND ){
			printk("    flowctrl:        local send\n");
		}
		else if (Stat == SK_FLOW_STAT_SYMMETRIC ){
			printk("    flowctrl:        symmetric\n");
		}
		else {
			printk("    flowctrl:        none\n");
		}

		/* tschilling: Check against CopperType now. */
		if ((pAC->GIni.GICopperType == SK_TRUE) &&
			(pAC->GIni.GP[FromPort].PLinkSpeedUsed ==
			SK_LSPEED_STAT_1000MBPS)) {
			Stat = pAC->GIni.GP[FromPort].PMSStatus;
			if (Stat == SK_MS_STAT_MASTER ) {
				printk("    role:            master\n");
			}
			else if (Stat == SK_MS_STAT_SLAVE ) {
				printk("    role:            slave\n");
			}
			else {
				printk("    role:            ???\n");
			}
		}

#ifdef SK_ZEROCOPY
		if (pAC->GIni.GIChipId == CHIP_ID_YUKON)
			printk("    scatter-gather:  enabled\n");
		else
			printk("    scatter-gather:  disabled\n");

#else
			printk("    scatter-gather:  disabled\n");
#endif
#endif /* SK98_INFO */

		if ((Param.Para32[0] != pAC->ActivePort) &&
			(pAC->RlmtNets == 1)) {
			NewPara.Para32[0] = pAC->ActivePort;
			NewPara.Para32[1] = Param.Para32[0];
			SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_INTERN,
				NewPara);
		}

		/* Inform the world that link protocol is up. */
#if 0
		pAC->dev[Param.Para32[0]]->flags |= IFF_RUNNING;
#endif

		break;
	case SK_DRV_NET_DOWN:	 /* SK_U32 Reason */
		/* action list 7 */
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("NET DOWN EVENT "));
#ifdef SK98_INFO
		printk("%s: network connection down\n", pAC->dev[Param.Para32[1]]->name);
#endif
#if 0
		pAC->dev[Param.Para32[1]]->flags &= ~IFF_RUNNING;
#endif
		break;
	case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("PORT SWITCH HARD "));
	case SK_DRV_SWITCH_SOFT: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
	/* action list 6 */
		printk("%s: switching to port %c\n", pAC->dev[0]->name,
			'A'+Param.Para32[1]);
	case SK_DRV_SWITCH_INTERN: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
		FromPort = Param.Para32[0];
		ToPort = Param.Para32[1];
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("PORT SWITCH EVENT, From: %d  To: %d (Pref %d) ",
			FromPort, ToPort, pAC->Rlmt.Net[0].PrefPort));
		NewPara.Para64 = FromPort;
		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
		NewPara.Para64 = ToPort;
		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
		spin_lock_irqsave(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);
		spin_lock_irqsave(
			&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
		SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST);
		SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST);
		spin_unlock_irqrestore(
			&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
		spin_unlock_irqrestore(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);

		ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */
		ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */

		ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
		ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]);
		spin_lock_irqsave(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);
		spin_lock_irqsave(
			&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
		pAC->ActivePort = ToPort;
#if 0
		SetQueueSizes(pAC);
#else
		/* tschilling: New common function with minimum size check. */
		DualNet = SK_FALSE;
		if (pAC->RlmtNets == 2) {
			DualNet = SK_TRUE;
		}

		if (SkGeInitAssignRamToQueues(
			pAC,
			pAC->ActivePort,
			DualNet)) {
			spin_unlock_irqrestore(
				&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
			spin_unlock_irqrestore(
				&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
				Flags);
			printk("SkGeInitAssignRamToQueues failed.\n");
			break;
		}
#endif
		/* tschilling: Handling of return values inserted. */
		if (SkGeInitPort(pAC, IoC, FromPort) ||
			SkGeInitPort(pAC, IoC, ToPort)) {
			printk("%s: SkGeInitPort failed.\n", pAC->dev[0]->name);
		}
		if (Event == SK_DRV_SWITCH_SOFT) {
			SkMacRxTxEnable(pAC, IoC, FromPort);
		}
		SkMacRxTxEnable(pAC, IoC, ToPort);
		SkAddrSwap(pAC, IoC, FromPort, ToPort);
		SkAddrMcUpdate(pAC, IoC, FromPort);
		SkAddrMcUpdate(pAC, IoC, ToPort);
		PortReInitBmu(pAC, FromPort);
		PortReInitBmu(pAC, ToPort);
		SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
		SkGePollTxD(pAC, IoC, ToPort, SK_TRUE);
		ClearAndStartRx(pAC, FromPort);
		ClearAndStartRx(pAC, ToPort);
		spin_unlock_irqrestore(
			&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags);
		spin_unlock_irqrestore(
			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
			Flags);
		break;
	case SK_DRV_RLMT_SEND:	 /* SK_MBUF *pMb */
		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
			("RLS "));
		pRlmtMbuf = (SK_MBUF*) Param.pParaPtr;
		pMsg = (struct sk_buff*) pRlmtMbuf->pOs;
		skb_put(pMsg, pRlmtMbuf->Length);
		if (XmitFrame(pAC, &pAC->TxPort[pRlmtMbuf->PortIdx][TX_PRIO_LOW],
			pMsg) < 0)

			DEV_KFREE_SKB_ANY(pMsg);
		break;
	default:
		break;
	}
	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
		("END EVENT "));

	return (0);
} /* SkDrvEvent */


/*****************************************************************************
 *
 *	SkErrorLog - log errors
 *
 * Description:
 *	This function logs errors to the system buffer and to the console
 *
 * Returns:
 *	0 if everything ok
 *	< 0  on error
 *
 */
void SkErrorLog(
SK_AC	*pAC,
int	ErrClass,
int	ErrNum,
char	*pErrorMsg)
{
char	ClassStr[80];

	switch (ErrClass) {
	case SK_ERRCL_OTHER:
		strcpy(ClassStr, "Other error");
		break;
	case SK_ERRCL_CONFIG:
		strcpy(ClassStr, "Configuration error");
		break;
	case SK_ERRCL_INIT:
		strcpy(ClassStr, "Initialization error");
		break;
	case SK_ERRCL_NORES:
		strcpy(ClassStr, "Out of resources error");
		break;
	case SK_ERRCL_SW:
		strcpy(ClassStr, "internal Software error");
		break;
	case SK_ERRCL_HW:
		strcpy(ClassStr, "Hardware failure");
		break;
	case SK_ERRCL_COMM:
		strcpy(ClassStr, "Communication error");
		break;
	}
	printk(KERN_INFO "%s: -- ERROR --\n        Class:  %s\n"
		"        Nr:  0x%x\n        Msg:  %s\n", pAC->dev[0]->name,
		ClassStr, ErrNum, pErrorMsg);

} /* SkErrorLog */

#ifdef DEBUG
/****************************************************************************/
/* "debug only" section *****************************************************/
/****************************************************************************/


/*****************************************************************************
 *
 *	DumpMsg - print a frame
 *
 * Description:
 *	This function prints frames to the system logfile/to the console.
 *
 * Returns: N/A
 *
 */
static void DumpMsg(struct sk_buff *skb, char *str)
{
	int	msglen;

	if (skb == NULL) {
		printk("DumpMsg(): NULL-Message\n");
		return;
	}

	if (skb->data == NULL) {
		printk("DumpMsg(): Message empty\n");
		return;
	}

	msglen = skb->len;
	if (msglen > 64)
		msglen = 64;

	printk("--- Begin of message from %s , len %d (from %d) ----\n", str, msglen, skb->len);

	DumpData((char *)skb->data, msglen);

	printk("------- End of message ---------\n");
} /* DumpMsg */


/*****************************************************************************
 *
 *	DumpData - print a data area
 *
 * Description:
 *	This function prints a area of data to the system logfile/to the
 *	console.
 *
 * Returns: N/A
 *
 */
static void DumpData(char *p, int size)
{
register int    i;
int	haddr, addr;
char	hex_buffer[180];
char	asc_buffer[180];
char	HEXCHAR[] = "0123456789ABCDEF";

	addr = 0;
	haddr = 0;
	hex_buffer[0] = 0;
	asc_buffer[0] = 0;
	for (i=0; i < size; ) {
		if (*p >= '0' && *p <='z')
			asc_buffer[addr] = *p;
		else
			asc_buffer[addr] = '.';
		addr++;
		asc_buffer[addr] = 0;
		hex_buffer[haddr] = HEXCHAR[(*p & 0xf0) >> 4];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[*p & 0x0f];
		haddr++;
		hex_buffer[haddr] = ' ';
		haddr++;
		hex_buffer[haddr] = 0;
		p++;
		i++;
		if (i%16 == 0) {
			printk("%s  %s\n", hex_buffer, asc_buffer);
			addr = 0;
			haddr = 0;
		}
	}
} /* DumpData */


/*****************************************************************************
 *
 *	DumpLong - print a data area as long values
 *
 * Description:
 *	This function prints a area of data to the system logfile/to the
 *	console.
 *
 * Returns: N/A
 *
 */
static void DumpLong(char *pc, int size)
{
register int    i;
int	haddr, addr;
char	hex_buffer[180];
char	asc_buffer[180];
char	HEXCHAR[] = "0123456789ABCDEF";
long	*p;
int	l;

	addr = 0;
	haddr = 0;
	hex_buffer[0] = 0;
	asc_buffer[0] = 0;
	p = (long*) pc;
	for (i=0; i < size; ) {
		l = (long) *p;
		hex_buffer[haddr] = HEXCHAR[(l >> 28) & 0xf];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[(l >> 24) & 0xf];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[(l >> 20) & 0xf];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[(l >> 16) & 0xf];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[(l >> 12) & 0xf];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[(l >> 8) & 0xf];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[(l >> 4) & 0xf];
		haddr++;
		hex_buffer[haddr] = HEXCHAR[l & 0x0f];
		haddr++;
		hex_buffer[haddr] = ' ';
		haddr++;
		hex_buffer[haddr] = 0;
		p++;
		i++;
		if (i%8 == 0) {
			printk("%4x %s\n", (i-8)*4, hex_buffer);
			haddr = 0;
		}
	}
	printk("------------------------\n");
} /* DumpLong */

#endif

#endif /* CONFIG_SK98 */