sf_internal.h
4.71 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
/*
* SPI flash internal definitions
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SF_INTERNAL_H_
#define _SF_INTERNAL_H_
#define SPI_FLASH_3B_ADDR_LEN 3
#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
#define SPI_FLASH_16MB_BOUN 0x1000000
/* CFI Manufacture ID's */
#define SPI_FLASH_CFI_MFR_SPANSION 0x01
#define SPI_FLASH_CFI_MFR_STMICRO 0x20
#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2
#define SPI_FLASH_CFI_MFR_WINBOND 0xef
/* Erase commands */
#define CMD_ERASE_4K 0x20
#define CMD_ERASE_32K 0x52
#define CMD_ERASE_CHIP 0xc7
#define CMD_ERASE_64K 0xd8
/* Write commands */
#define CMD_WRITE_STATUS 0x01
#define CMD_PAGE_PROGRAM 0x02
#define CMD_WRITE_DISABLE 0x04
#define CMD_READ_STATUS 0x05
#define CMD_QUAD_PAGE_PROGRAM 0x32
#define CMD_READ_STATUS1 0x35
#define CMD_WRITE_ENABLE 0x06
#define CMD_READ_CONFIG 0x35
#define CMD_FLAG_STATUS 0x70
/* Read commands */
#define CMD_READ_ARRAY_SLOW 0x03
#define CMD_READ_ARRAY_FAST 0x0b
#define CMD_READ_DUAL_OUTPUT_FAST 0x3b
#define CMD_READ_DUAL_IO_FAST 0xbb
#define CMD_READ_QUAD_OUTPUT_FAST 0x6b
#define CMD_READ_QUAD_IO_FAST 0xeb
#define CMD_READ_ID 0x9f
/* Bank addr access commands */
#ifdef CONFIG_SPI_FLASH_BAR
# define CMD_BANKADDR_BRWR 0x17
# define CMD_BANKADDR_BRRD 0x16
# define CMD_EXTNADDR_WREAR 0xC5
# define CMD_EXTNADDR_RDEAR 0xC8
#endif
/* Common status */
#define STATUS_WIP (1 << 0)
#define STATUS_QEB_WINSPAN (1 << 1)
#define STATUS_QEB_MXIC (1 << 6)
#define STATUS_PEC (1 << 7)
/* Flash timeout values */
#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
/* SST specific */
#ifdef CONFIG_SPI_FLASH_SST
# define SST_WP 0x01 /* Supports AAI word program */
# define CMD_SST_BP 0x02 /* Byte Program */
# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
const void *buf);
#endif
/* Send a single-byte command to the device and read the response */
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
/*
* Send a multi-byte command to the device and read the response. Used
* for flash array reads, etc.
*/
int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/*
* Send a multi-byte command to the device followed by (optional)
* data. Used for programming the flash array, etc.
*/
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len);
/* Flash erase(sectors) operation, support all possible erase commands */
int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
/* Read the status register */
int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs);
/* Program the status register */
int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws);
/* Read the config register */
int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc);
/* Program the config register */
int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc);
/* Enable writing on the SPI flash */
static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
{
return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
}
/* Disable writing on the SPI flash */
static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
{
return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
}
/*
* Send the read status command to the device and wait for the wip
* (write-in-progress) bit to clear itself.
*/
int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout);
/*
* Used for spi_flash write operation
* - SPI claim
* - spi_flash_cmd_write_enable
* - spi_flash_cmd_write
* - spi_flash_cmd_wait_ready
* - SPI release
*/
int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, const void *buf, size_t buf_len);
/*
* Flash write operation, support all possible write commands.
* Write the requested data out breaking it up into multiple write
* commands as needed per the write size.
*/
int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
size_t len, const void *buf);
/*
* Same as spi_flash_cmd_read() except it also claims/releases the SPI
* bus. Used as common part of the ->read() operation.
*/
int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/* Flash read operation, support all possible read commands */
int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
size_t len, void *data);
#endif /* _SF_INTERNAL_H_ */