designware_i2c_pci.c
4.05 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
* Copyright 2019 Google Inc
*/
#include <common.h>
#include <dm.h>
#include <spl.h>
#include <asm/lpss.h>
#include "designware_i2c.h"
enum {
VANILLA = 0, /* standard I2C with no tweaks */
INTEL_APL, /* Apollo Lake I2C */
};
/* BayTrail HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg byt_config = {
.ss_hcnt = 0x200,
.fs_hcnt = 0x55,
.ss_lcnt = 0x200,
.fs_lcnt = 0x99,
.sda_hold = 0x6,
};
/* Have a weak function for now - possibly should be a new uclass */
__weak void lpss_reset_release(void *regs);
static int designware_i2c_pci_ofdata_to_platdata(struct udevice *dev)
{
struct dw_i2c *priv = dev_get_priv(dev);
if (spl_phase() < PHASE_SPL) {
u32 base;
int ret;
ret = dev_read_u32(dev, "early-regs", &base);
if (ret)
return log_msg_ret("early-regs", ret);
/* Set i2c base address */
dm_pci_write_config32(dev, PCI_BASE_ADDRESS_0, base);
/* Enable memory access and bus master */
dm_pci_write_config32(dev, PCI_COMMAND, PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER);
}
if (spl_phase() < PHASE_BOARD_F) {
/* Handle early, fixed mapping into a different address space */
priv->regs = (struct i2c_regs *)dm_pci_read_bar32(dev, 0);
} else {
priv->regs = (struct i2c_regs *)
dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
}
if (!priv->regs)
return -EINVAL;
/* Save base address from PCI BAR */
if (IS_ENABLED(CONFIG_INTEL_BAYTRAIL))
/* Use BayTrail specific timing values */
priv->scl_sda_cfg = &byt_config;
if (dev_get_driver_data(dev) == INTEL_APL)
priv->has_spk_cnt = true;
return designware_i2c_ofdata_to_platdata(dev);
}
static int designware_i2c_pci_probe(struct udevice *dev)
{
struct dw_i2c *priv = dev_get_priv(dev);
if (dev_get_driver_data(dev) == INTEL_APL) {
/* Ensure controller is in D0 state */
lpss_set_power_state(dev, STATE_D0);
lpss_reset_release(priv->regs);
}
return designware_i2c_probe(dev);
}
static int designware_i2c_pci_bind(struct udevice *dev)
{
char name[20];
/*
* Create a unique device name for PCI type devices
* ToDo:
* Setting req_seq in the driver is probably not recommended.
* But without a DT alias the number is not configured. And
* using this driver is impossible for PCIe I2C devices.
* This can be removed, once a better (correct) way for this
* is found and implemented.
*
* TODO(sjg@chromium.org): Perhaps if uclasses had platdata this would
* be possible. We cannot use static data in drivers since they may be
* used in SPL or before relocation.
*/
dev->req_seq = gd->arch.dw_i2c_num_cards++;
sprintf(name, "i2c_designware#%u", dev->req_seq);
device_set_name(dev, name);
return 0;
}
static const struct udevice_id designware_i2c_pci_ids[] = {
{ .compatible = "snps,designware-i2c-pci" },
{ .compatible = "intel,apl-i2c", .data = INTEL_APL },
{ }
};
U_BOOT_DRIVER(i2c_designware_pci) = {
.name = "i2c_designware_pci",
.id = UCLASS_I2C,
.of_match = designware_i2c_pci_ids,
.bind = designware_i2c_pci_bind,
.ofdata_to_platdata = designware_i2c_pci_ofdata_to_platdata,
.probe = designware_i2c_pci_probe,
.priv_auto_alloc_size = sizeof(struct dw_i2c),
.remove = designware_i2c_remove,
.flags = DM_FLAG_OS_PREPARE,
.ops = &designware_i2c_ops,
};
static struct pci_device_id designware_pci_supported[] = {
/* Intel BayTrail has 7 I2C controller located on the PCI bus */
{ PCI_VDEVICE(INTEL, 0x0f41) },
{ PCI_VDEVICE(INTEL, 0x0f42) },
{ PCI_VDEVICE(INTEL, 0x0f43) },
{ PCI_VDEVICE(INTEL, 0x0f44) },
{ PCI_VDEVICE(INTEL, 0x0f45) },
{ PCI_VDEVICE(INTEL, 0x0f46) },
{ PCI_VDEVICE(INTEL, 0x0f47) },
{ PCI_VDEVICE(INTEL, 0x5aac), .driver_data = INTEL_APL },
{ PCI_VDEVICE(INTEL, 0x5aae), .driver_data = INTEL_APL },
{ PCI_VDEVICE(INTEL, 0x5ab0), .driver_data = INTEL_APL },
{ PCI_VDEVICE(INTEL, 0x5ab2), .driver_data = INTEL_APL },
{ PCI_VDEVICE(INTEL, 0x5ab4), .driver_data = INTEL_APL },
{ PCI_VDEVICE(INTEL, 0x5ab6), .driver_data = INTEL_APL },
{},
};
U_BOOT_PCI_DEVICE(i2c_designware_pci, designware_pci_supported);