apalis-tk1.c
4.18 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
/*
* Copyright (c) 2016 Toradex, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch-tegra/ap.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <power/as3722.h>
#include "../common/tdx-common.h"
#include "pinmux-config-apalis-tk1.h"
#define LAN_RESET_N TEGRA_GPIO(S, 2)
int arch_misc_init(void)
{
if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
NVBOOTTYPE_RECOVERY)
printf("USB recovery mode\n");
return 0;
}
int checkboard(void)
{
puts("Model: Toradex Apalis TK1 2GB\n");
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
return ft_common_board_setup(blob, bd);
}
#endif
/*
* Routine: pinmux_init
* Description: Do individual peripheral pinmux configs
*/
void pinmux_init(void)
{
pinmux_clear_tristate_input_clamping();
gpio_config_table(apalis_tk1_gpio_inits,
ARRAY_SIZE(apalis_tk1_gpio_inits));
pinmux_config_pingrp_table(apalis_tk1_pingrps,
ARRAY_SIZE(apalis_tk1_pingrps));
pinmux_config_drvgrp_table(apalis_tk1_drvgrps,
ARRAY_SIZE(apalis_tk1_drvgrps));
}
#ifdef CONFIG_PCI_TEGRA
int tegra_pcie_board_init(void)
{
/* TODO: Convert to driver model
struct udevice *pmic;
int err;
err = as3722_init(&pmic);
if (err) {
error("failed to initialize AS3722 PMIC: %d\n", err);
return err;
}
err = as3722_sd_enable(pmic, 4);
if (err < 0) {
error("failed to enable SD4: %d\n", err);
return err;
}
err = as3722_sd_set_voltage(pmic, 4, 0x24);
if (err < 0) {
error("failed to set SD4 voltage: %d\n", err);
return err;
}
err = as3722_gpio_configure(pmic, 1, AS3722_GPIO_OUTPUT_VDDH |
AS3722_GPIO_INVERT);
if (err < 0) {
error("failed to configure GPIO#1 as output: %d\n", err);
return err;
}
err = as3722_gpio_direction_output(pmic, 2, 1);
if (err < 0) {
error("failed to set GPIO#2 high: %d\n", err);
return err;
}
*/
/* Reset I210 Gigabit Ethernet Controller */
gpio_request(LAN_RESET_N, "LAN_RESET_N");
gpio_direction_output(LAN_RESET_N, 0);
/*
* Make sure we don't get any back feeding from LAN_WAKE_N resp.
* DEV_OFF_N
*/
gpio_request(TEGRA_GPIO(O, 5), "LAN_WAKE_N");
gpio_direction_output(TEGRA_GPIO(O, 5), 0);
gpio_request(TEGRA_GPIO(O, 6), "LAN_DEV_OFF_N");
gpio_direction_output(TEGRA_GPIO(O, 6), 0);
/* Make sure LDO9 and LDO10 are initially enabled @ 0V */
/* TODO: Convert to driver model
err = as3722_ldo_enable(pmic, 9);
if (err < 0) {
error("failed to enable LDO9: %d\n", err);
return err;
}
err = as3722_ldo_enable(pmic, 10);
if (err < 0) {
error("failed to enable LDO10: %d\n", err);
return err;
}
err = as3722_ldo_set_voltage(pmic, 9, 0x80);
if (err < 0) {
error("failed to set LDO9 voltage: %d\n", err);
return err;
}
err = as3722_ldo_set_voltage(pmic, 10, 0x80);
if (err < 0) {
error("failed to set LDO10 voltage: %d\n", err);
return err;
}
*/
mdelay(100);
/* Make sure controller gets enabled by disabling DEV_OFF_N */
gpio_set_value(TEGRA_GPIO(O, 6), 1);
/* Enable LDO9 and LDO10 for +V3.3_ETH on patched prototypes */
/* TODO: Convert to driver model
err = as3722_ldo_set_voltage(pmic, 9, 0xff);
if (err < 0) {
error("failed to set LDO9 voltage: %d\n", err);
return err;
}
err = as3722_ldo_set_voltage(pmic, 10, 0xff);
if (err < 0) {
error("failed to set LDO10 voltage: %d\n", err);
return err;
}
*/
mdelay(100);
gpio_set_value(LAN_RESET_N, 1);
#ifdef APALIS_TK1_PCIE_EVALBOARD_INIT
#define PEX_PERST_N TEGRA_GPIO(DD, 1) /* Apalis GPIO7 */
#define RESET_MOCI_CTRL TEGRA_GPIO(U, 4)
/* Reset PLX PEX 8605 PCIe Switch plus PCIe devices on Apalis Evaluation
Board */
gpio_request(PEX_PERST_N, "PEX_PERST_N");
gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL");
gpio_direction_output(PEX_PERST_N, 0);
gpio_direction_output(RESET_MOCI_CTRL, 0);
/* Must be asserted for 100 ms after power and clocks are stable */
mdelay(100);
gpio_set_value(PEX_PERST_N, 1);
/* Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not Guaranteed Until
900 us After PEX_PERST# De-assertion */
mdelay(1);
gpio_set_value(RESET_MOCI_CTRL, 1);
#endif /* APALIS_T30_PCIE_EVALBOARD_INIT */
return 0;
}
#endif /* CONFIG_PCI_TEGRA */