intel_flash.h
6.6 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
/*
* acceptable chips types are:
*
* 28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A
*/
/* register addresses, valid only following an CHIP_CMD_RD_ID command */
#define CHIP_ADDR_REG_MAN 0x000000 /* manufacturer's id */
#define CHIP_ADDR_REG_DEV 0x000001 /* device id */
#define CHIP_ADDR_REG_CFGM 0x000003 /* master lock config */
#define CHIP_ADDR_REG_CFG(b) (((b)<<16)|2) /* lock config for block b */
/* Commands */
#define CHIP_CMD_RST 0xFF /* reset flash */
#define CHIP_CMD_RD_ID 0x90 /* read the id and lock bits */
#define CHIP_CMD_RD_QUERY 0x98 /* read device capabilities */
#define CHIP_CMD_RD_STAT 0x70 /* read the status register */
#define CHIP_CMD_CLR_STAT 0x50 /* clear the staus register */
#define CHIP_CMD_WR_BUF 0xE8 /* clear the staus register */
#define CHIP_CMD_PROG 0x40 /* program word command */
#define CHIP_CMD_ERASE1 0x20 /* 1st word for block erase */
#define CHIP_CMD_ERASE2 0xD0 /* 2nd word for block erase */
#define CHIP_CMD_ERASE_SUSP 0xB0 /* suspend block erase */
#define CHIP_CMD_LOCK 0x60 /* 1st word for all lock cmds */
#define CHIP_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */
#define CHIP_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */
#define CHIP_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */
/* status register bits */
#define CHIP_STAT_DPS 0x02 /* Device Protect Status */
#define CHIP_STAT_VPPS 0x08 /* VPP Status */
#define CHIP_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */
#define CHIP_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */
#define CHIP_STAT_ESS 0x40 /* Erase Suspend Status */
#define CHIP_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */
#define CHIP_STAT_ERR (CHIP_STAT_VPPS | CHIP_STAT_DPS | \
CHIP_STAT_ECLBS | CHIP_STAT_PSLBS)
/* ID and Lock Configuration */
#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
#define CHIP_RD_ID_DEV CONFIG_SYS_FLASH_ID
/* dimensions */
#define CHIP_WIDTH 2 /* chips are in 16 bit mode */
#define CHIP_WSHIFT 1 /* (log2 of CHIP_WIDTH) */
#define CHIP_NBLOCKS 128
#define CHIP_BLKSZ (128 * 1024) /* of 128Kbytes each */
#define CHIP_SIZE (CHIP_BLKSZ * CHIP_NBLOCKS)
/********************** DEFINES for Hymod Flash ******************************/
/*
* The hymod board has 2 x 28F320J5 chips running in
* 16 bit mode, for a 32 bit wide bank.
*/
typedef unsigned short bank_word_t; /* 8/16/32/64bit unsigned int */
typedef volatile bank_word_t *bank_addr_t;
typedef unsigned long bank_size_t; /* want this big - >= 32 bit */
#define BANK_CHIP_WIDTH 1 /* each bank is 1 chip wide */
#define BANK_CHIP_WSHIFT 0 /* (log2 of BANK_CHIP_WIDTH) */
#define BANK_WIDTH (CHIP_WIDTH * BANK_CHIP_WIDTH)
#define BANK_WSHIFT (CHIP_WSHIFT + BANK_CHIP_WSHIFT)
#define BANK_NBLOCKS CHIP_NBLOCKS
#define BANK_BLKSZ (CHIP_BLKSZ * BANK_CHIP_WIDTH)
#define BANK_SIZE (CHIP_SIZE * BANK_CHIP_WIDTH)
#define MAX_BANKS 1 /* only one bank possible */
/* align bank addresses and sizes to bank word boundaries */
#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
& ~(BANK_WIDTH - 1)))
#define BANK_SIZE_WORD_ALIGN(s) ((bank_size_t)BANK_ADDR_WORD_ALIGN( \
(bank_size_t)(s) + (BANK_WIDTH - 1)))
/* align bank addresses and sizes to bank block boundaries */
#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
& ~(BANK_BLKSZ - 1)))
#define BANK_SIZE_BLK_ALIGN(s) ((bank_size_t)BANK_ADDR_BLK_ALIGN( \
(bank_size_t)(s) + (BANK_BLKSZ - 1)))
/* align bank addresses and sizes to bank boundaries */
#define BANK_ADDR_BANK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
& ~(BANK_SIZE - 1)))
#define BANK_SIZE_BANK_ALIGN(s) ((bank_size_t)BANK_ADDR_BANK_ALIGN( \
(bank_size_t)(s) + (BANK_SIZE - 1)))
/* add an offset to a bank address */
#define BANK_ADDR_OFFSET(a, o) (bank_addr_t)((bank_size_t)(a) + \
(bank_size_t)(o))
/* get base address of bank b, given flash base address a */
#define BANK_ADDR_BASE(a, b) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
(bank_size_t)(b) * BANK_SIZE)
/* adjust a bank address to start of next word, block or bank */
#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
BANK_WIDTH)
#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
BANK_BLKSZ)
#define BANK_ADDR_NEXT_BANK(a) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
BANK_SIZE)
/* get bank address of chip register r given a bank base address a */
#define BANK_ADDR_REG(a, r) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
((bank_size_t)(r) << BANK_WSHIFT))
/* make a bank address for each chip register address */
#define BANK_ADDR_REG_MAN(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN)
#define BANK_ADDR_REG_DEV(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV)
#define BANK_ADDR_REG_CFGM(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM)
#define BANK_ADDR_REG_CFG(b,a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b))
/*
* replicate a chip cmd/stat/rd value into each byte position within a word
* so that multiple chips are accessed in a single word i/o operation
*
* this must be as wide as the bank_word_t type, and take into account the
* chip width and bank layout
*/
#define BANK_FILL_WORD(o) ((bank_word_t)(o))
/* make a bank word value for each chip cmd/stat/rd value */
/* Commands */
#define BANK_CMD_RST BANK_FILL_WORD(CHIP_CMD_RST)
#define BANK_CMD_RD_ID BANK_FILL_WORD(CHIP_CMD_RD_ID)
#define BANK_CMD_RD_STAT BANK_FILL_WORD(CHIP_CMD_RD_STAT)
#define BANK_CMD_CLR_STAT BANK_FILL_WORD(CHIP_CMD_CLR_STAT)
#define BANK_CMD_ERASE1 BANK_FILL_WORD(CHIP_CMD_ERASE1)
#define BANK_CMD_ERASE2 BANK_FILL_WORD(CHIP_CMD_ERASE2)
#define BANK_CMD_PROG BANK_FILL_WORD(CHIP_CMD_PROG)
#define BANK_CMD_LOCK BANK_FILL_WORD(CHIP_CMD_LOCK)
#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK)
#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR)
#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK)
/* status register bits */
#define BANK_STAT_DPS BANK_FILL_WORD(CHIP_STAT_DPS)
#define BANK_STAT_PSS BANK_FILL_WORD(CHIP_STAT_PSS)
#define BANK_STAT_VPPS BANK_FILL_WORD(CHIP_STAT_VPPS)
#define BANK_STAT_PSLBS BANK_FILL_WORD(CHIP_STAT_PSLBS)
#define BANK_STAT_ECLBS BANK_FILL_WORD(CHIP_STAT_ECLBS)
#define BANK_STAT_ESS BANK_FILL_WORD(CHIP_STAT_ESS)
#define BANK_STAT_RDY BANK_FILL_WORD(CHIP_STAT_RDY)
#define BANK_STAT_ERR BANK_FILL_WORD(CHIP_STAT_ERR)
/* ID and Lock Configuration */
#define BANK_RD_ID_LOCK BANK_FILL_WORD(CHIP_RD_ID_LOCK)
#define BANK_RD_ID_MAN BANK_FILL_WORD(CHIP_RD_ID_MAN)
#define BANK_RD_ID_DEV BANK_FILL_WORD(CHIP_RD_ID_DEV)