sil680.c 2.67 KB
/*
 * (C) Copyright 2007
 * Gary Jennejohn, DENX Software Engineering, garyj@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
/* sil680.c - ide support functions for the Sil0680A controller */

/*
 * The following parameters must be defined in the configuration file
 * of the target board:
 *
 * #define CONFIG_IDE_SIL680
 *
 * #define CONFIG_PCI_PNP
 * NOTE it may also be necessary to define this if the default of 8 is
 * incorrect for the target board (e.g. the sequoia board requires 0).
 * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0
 *
 * #define CONFIG_CMD_IDE
 * #undef  CONFIG_IDE_8xx_DIRECT
 * #undef  CONFIG_IDE_LED
 * #undef  CONFIG_IDE_RESET
 * #define CONFIG_IDE_PREINIT
 * #define CONFIG_SYS_IDE_MAXBUS		2 - modify to suit
 * #define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
 * #define CONFIG_SYS_ATA_BASE_ADDR	0
 * #define CONFIG_SYS_ATA_IDE0_OFFSET	0
 * #define CONFIG_SYS_ATA_IDE1_OFFSET	0
 * #define CONFIG_SYS_ATA_DATA_OFFSET	0
 * #define CONFIG_SYS_ATA_REG_OFFSET	0
 * #define CONFIG_SYS_ATA_ALT_OFFSET	0x0004
 *
 * The mapping for PCI IO-space.
 * NOTE this is the value for the sequoia board. Modify to suit.
 * #define CONFIG_SYS_PCI0_IO_SPACE   0xE8000000
 */

#include <common.h>
#include <ata.h>
#include <ide.h>
#include <pci.h>

extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];

int ide_preinit (void)
{
	int status;
	pci_dev_t devbusfn;
	int l;

	status = 1;
	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
		ide_bus_offset[l] = -ATA_STATUS;
	}
	devbusfn = pci_find_device (0x1095, 0x0680, 0);
	if (devbusfn != -1) {
		status = 0;

		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
				       (u32 *) &ide_bus_offset[0]);
		ide_bus_offset[0] &= 0xfffffff8;
		ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
				       (u32 *) &ide_bus_offset[1]);
		ide_bus_offset[1] &= 0xfffffff8;
		ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
		/* init various things - taken from the Linux driver */
		/* set PIO mode */
		pci_write_config_byte(devbusfn, 0x80, 0x00);
		pci_write_config_byte(devbusfn, 0x84, 0x00);
		/* IDE0 */
		pci_write_config_byte(devbusfn,  0xA1, 0x02);
		pci_write_config_word(devbusfn,  0xA2, 0x328A);
		pci_write_config_dword(devbusfn, 0xA4, 0x62DD62DD);
		pci_write_config_dword(devbusfn, 0xA8, 0x43924392);
		pci_write_config_dword(devbusfn, 0xAC, 0x40094009);
		/* IDE1 */
		pci_write_config_byte(devbusfn,  0xB1, 0x02);
		pci_write_config_word(devbusfn,  0xB2, 0x328A);
		pci_write_config_dword(devbusfn, 0xB4, 0x62DD62DD);
		pci_write_config_dword(devbusfn, 0xB8, 0x43924392);
		pci_write_config_dword(devbusfn, 0xBC, 0x40094009);
	}
	return (status);
}

void ide_set_reset (int flag) {
	return;
}