natsemi.c 22.9 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882
/*
   natsemi.c: A U-Boot driver for the NatSemi DP8381x series.
   Author: Mark A. Rakes (mark_rakes@vivato.net)

   Adapted from an Etherboot driver written by:

   Copyright (C) 2001 Entity Cyber, Inc.

   This development of this Etherboot driver was funded by

      Sicom Systems: http://www.sicompos.com/

   Author: Marty Connor (mdc@thinguin.org)
   Adapted from a Linux driver which was written by Donald Becker

   This software may be used and distributed according to the terms
   of the GNU Public License (GPL), incorporated herein by reference.

   Original Copyright Notice:

   Written/copyright 1999-2001 by Donald Becker.

   This software may be used and distributed according to the terms of
   the GNU General Public License (GPL), incorporated herein by reference.
   Drivers based on or derived from this code fall under the GPL and must
   retain the authorship, copyright and license notice.  This file is not
   a complete program and may only be used when the entire operating
   system is licensed under the GPL.  License for under other terms may be
   available.  Contact the original author for details.

   The original author may be reached as becker@scyld.com, or at
   Scyld Computing Corporation
   410 Severn Ave., Suite 210
   Annapolis MD 21403

   Support information and updates available at
   http://www.scyld.com/network/netsemi.html

   References:
   http://www.scyld.com/expert/100mbps.html
   http://www.scyld.com/expert/NWay.html
   Datasheet is available from:
   http://www.national.com/pf/DP/DP83815.html
*/

/* Revision History
 * October 2002 mar	1.0
 *   Initial U-Boot Release.  Tested with Netgear FA311 board
 *   and dp83815 chipset on custom board
*/

/* Includes */
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
#include <asm/io.h>
#include <pci.h>

/* defines */
#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/

#define DSIZE		0x00000FFF
#define ETH_ALEN	6
#define CRC_SIZE	4
#define TOUT_LOOP	500000
#define TX_BUF_SIZE	1536
#define RX_BUF_SIZE	1536
#define NUM_RX_DESC	4	/* Number of Rx descriptor registers. */

/* Offsets to the device registers.
   Unlike software-only systems, device drivers interact with complex hardware.
   It's not useful to define symbolic names for every register bit in the
   device.  */
enum register_offsets {
	ChipCmd	= 0x00,
	ChipConfig	= 0x04,
	EECtrl		= 0x08,
	IntrMask	= 0x14,
	IntrEnable	= 0x18,
	TxRingPtr	= 0x20,
	TxConfig	= 0x24,
	RxRingPtr	= 0x30,
	RxConfig	= 0x34,
	ClkRun		= 0x3C,
	RxFilterAddr	= 0x48,
	RxFilterData	= 0x4C,
	SiliconRev	= 0x58,
	PCIPM		= 0x44,
	BasicControl	= 0x80,
	BasicStatus	= 0x84,
	/* These are from the spec, around page 78... on a separate table. */
	PGSEL		= 0xCC,
	PMDCSR		= 0xE4,
	TSTDAT		= 0xFC,
	DSPCFG		= 0xF4,
	SDCFG		= 0x8C
};

/* Bit in ChipCmd. */
enum ChipCmdBits {
	ChipReset	= 0x100,
	RxReset		= 0x20,
	TxReset		= 0x10,
	RxOff		= 0x08,
	RxOn		= 0x04,
	TxOff		= 0x02,
	TxOn		= 0x01
};

enum ChipConfigBits {
	LinkSts	= 0x80000000,
	HundSpeed	= 0x40000000,
	FullDuplex	= 0x20000000,
	TenPolarity	= 0x10000000,
	AnegDone	= 0x08000000,
	AnegEnBothBoth	= 0x0000E000,
	AnegDis100Full	= 0x0000C000,
	AnegEn100Both	= 0x0000A000,
	AnegDis100Half	= 0x00008000,
	AnegEnBothHalf	= 0x00006000,
	AnegDis10Full	= 0x00004000,
	AnegEn10Both	= 0x00002000,
	DuplexMask	= 0x00008000,
	SpeedMask	= 0x00004000,
	AnegMask	= 0x00002000,
	AnegDis10Half	= 0x00000000,
	ExtPhy		= 0x00001000,
	PhyRst		= 0x00000400,
	PhyDis		= 0x00000200,
	BootRomDisable	= 0x00000004,
	BEMode		= 0x00000001,
};

enum TxConfig_bits {
	TxDrthMask	= 0x3f,
	TxFlthMask	= 0x3f00,
	TxMxdmaMask	= 0x700000,
	TxMxdma_512	= 0x0,
	TxMxdma_4	= 0x100000,
	TxMxdma_8	= 0x200000,
	TxMxdma_16	= 0x300000,
	TxMxdma_32	= 0x400000,
	TxMxdma_64	= 0x500000,
	TxMxdma_128	= 0x600000,
	TxMxdma_256	= 0x700000,
	TxCollRetry	= 0x800000,
	TxAutoPad	= 0x10000000,
	TxMacLoop	= 0x20000000,
	TxHeartIgn	= 0x40000000,
	TxCarrierIgn	= 0x80000000
};

enum RxConfig_bits {
	RxDrthMask	= 0x3e,
	RxMxdmaMask	= 0x700000,
	RxMxdma_512	= 0x0,
	RxMxdma_4	= 0x100000,
	RxMxdma_8	= 0x200000,
	RxMxdma_16	= 0x300000,
	RxMxdma_32	= 0x400000,
	RxMxdma_64	= 0x500000,
	RxMxdma_128	= 0x600000,
	RxMxdma_256	= 0x700000,
	RxAcceptLong	= 0x8000000,
	RxAcceptTx	= 0x10000000,
	RxAcceptRunt	= 0x40000000,
	RxAcceptErr	= 0x80000000
};

/* Bits in the RxMode register. */
enum rx_mode_bits {
	AcceptErr	= 0x20,
	AcceptRunt	= 0x10,
	AcceptBroadcast	= 0xC0000000,
	AcceptMulticast	= 0x00200000,
	AcceptAllMulticast = 0x20000000,
	AcceptAllPhys	= 0x10000000,
	AcceptMyPhys	= 0x08000000
};

typedef struct _BufferDesc {
	u32 link;
	vu_long cmdsts;
	u32 bufptr;
	u32 software_use;
} BufferDesc;

/* Bits in network_desc.status */
enum desc_status_bits {
	DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
	DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
	DescSizeMask = 0xfff,

	DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
	DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
	DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
	DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,

	DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
	DescRxDest = 0x01800000, DescRxLong = 0x00400000,
	DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
	DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
	DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
};

/* Globals */
#ifdef NATSEMI_DEBUG
static int natsemi_debug = 0;	/* 1 verbose debugging, 0 normal */
#endif
static u32 SavedClkRun;
static unsigned int cur_rx;
static unsigned int advertising;
static unsigned int rx_config;
static unsigned int tx_config;

/* Note: transmit and receive buffers and descriptors must be
   longword aligned */
static BufferDesc txd __attribute__ ((aligned(4)));
static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(4)));

static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(4)));
static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
    __attribute__ ((aligned(4)));

/* Function Prototypes */
#if 0
static void write_eeprom(struct eth_device *dev, long addr, int location,
			 short value);
#endif
static int read_eeprom(struct eth_device *dev, long addr, int location);
static int mdio_read(struct eth_device *dev, int phy_id, int location);
static int natsemi_init(struct eth_device *dev, bd_t * bis);
static void natsemi_reset(struct eth_device *dev);
static void natsemi_init_rxfilter(struct eth_device *dev);
static void natsemi_init_txd(struct eth_device *dev);
static void natsemi_init_rxd(struct eth_device *dev);
static void natsemi_set_rx_mode(struct eth_device *dev);
static void natsemi_check_duplex(struct eth_device *dev);
static int natsemi_send(struct eth_device *dev, void *packet, int length);
static int natsemi_poll(struct eth_device *dev);
static void natsemi_disable(struct eth_device *dev);

static struct pci_device_id supported[] = {
	{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815},
	{}
};

#define bus_to_phys(a)	pci_mem_to_phys((pci_dev_t)dev->priv, a)
#define phys_to_bus(a)	pci_phys_to_mem((pci_dev_t)dev->priv, a)

static inline int
INW(struct eth_device *dev, u_long addr)
{
	return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
}

static int
INL(struct eth_device *dev, u_long addr)
{
	return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
}

static inline void
OUTW(struct eth_device *dev, int command, u_long addr)
{
	*(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
}

static inline void
OUTL(struct eth_device *dev, int command, u_long addr)
{
	*(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
}

/*
 * Function: natsemi_initialize
 *
 * Description: Retrieves the MAC address of the card, and sets up some
 * globals required by other routines,  and initializes the NIC, making it
 * ready to send and receive packets.
 *
 * Side effects:
 *            leaves the natsemi initialized, and ready to receive packets.
 *
 * Returns:   struct eth_device *:          pointer to NIC data structure
 */

int
natsemi_initialize(bd_t * bis)
{
	pci_dev_t devno;
	int card_number = 0;
	struct eth_device *dev;
	u32 iobase, status, chip_config;
	int i, idx = 0;
	int prev_eedata;
	u32 tmp;

	while (1) {
		/* Find PCI device(s) */
		if ((devno = pci_find_devices(supported, idx++)) < 0) {
			break;
		}

		pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
		iobase &= ~0x3;	/* bit 1: unused and bit 0: I/O Space Indicator */

		pci_write_config_dword(devno, PCI_COMMAND,
				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);

		/* Check if I/O accesses and Bus Mastering are enabled. */
		pci_read_config_dword(devno, PCI_COMMAND, &status);
		if (!(status & PCI_COMMAND_MEMORY)) {
			printf("Error: Can not enable MEM access.\n");
			continue;
		} else if (!(status & PCI_COMMAND_MASTER)) {
			printf("Error: Can not enable Bus Mastering.\n");
			continue;
		}

		dev = (struct eth_device *) malloc(sizeof *dev);
		if (!dev) {
			printf("natsemi: Can not allocate memory\n");
			break;
		}
		memset(dev, 0, sizeof(*dev));

		sprintf(dev->name, "dp83815#%d", card_number);
		dev->iobase = bus_to_phys(iobase);
#ifdef NATSEMI_DEBUG
		printf("natsemi: NatSemi ns8381[56] @ %#x\n", dev->iobase);
#endif
		dev->priv = (void *) devno;
		dev->init = natsemi_init;
		dev->halt = natsemi_disable;
		dev->send = natsemi_send;
		dev->recv = natsemi_poll;

		eth_register(dev);

		card_number++;

		/* Set the latency timer for value. */
		pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);

		udelay(10 * 1000);

		/* natsemi has a non-standard PM control register
		 * in PCI config space.  Some boards apparently need
		 * to be brought to D0 in this manner.  */
		pci_read_config_dword(devno, PCIPM, &tmp);
		if (tmp & (0x03 | 0x100)) {
			/* D0 state, disable PME assertion */
			u32 newtmp = tmp & ~(0x03 | 0x100);
			pci_write_config_dword(devno, PCIPM, newtmp);
		}

		printf("natsemi: EEPROM contents:\n");
		for (i = 0; i <= EEPROM_SIZE; i++) {
			short eedata = read_eeprom(dev, EECtrl, i);
			printf(" %04hx", eedata);
		}
		printf("\n");

		/* get MAC address */
		prev_eedata = read_eeprom(dev, EECtrl, 6);
		for (i = 0; i < 3; i++) {
			int eedata = read_eeprom(dev, EECtrl, i + 7);
			dev->enetaddr[i*2] = (eedata << 1) + (prev_eedata >> 15);
			dev->enetaddr[i*2+1] = eedata >> 7;
			prev_eedata = eedata;
		}

		/* Reset the chip to erase any previous misconfiguration. */
		OUTL(dev, ChipReset, ChipCmd);

		advertising = mdio_read(dev, 1, 4);
		chip_config = INL(dev, ChipConfig);
#ifdef NATSEMI_DEBUG
		printf("%s: Transceiver status %#08X advertising %#08X\n",
			dev->name, (int) INL(dev, BasicStatus), advertising);
		printf("%s: Transceiver default autoneg. %s 10%s %s duplex.\n",
			dev->name, chip_config & AnegMask ? "enabled, advertise" :
			"disabled, force", chip_config & SpeedMask ? "0" : "",
			chip_config & DuplexMask ? "full" : "half");
#endif
		chip_config |= AnegEnBothBoth;
#ifdef NATSEMI_DEBUG
		printf("%s: changed to autoneg. %s 10%s %s duplex.\n",
			dev->name, chip_config & AnegMask ? "enabled, advertise" :
			"disabled, force", chip_config & SpeedMask ? "0" : "",
			chip_config & DuplexMask ? "full" : "half");
#endif
		/*write new autoneg bits, reset phy*/
		OUTL(dev, (chip_config | PhyRst), ChipConfig);
		/*un-reset phy*/
		OUTL(dev, chip_config, ChipConfig);

		/* Disable PME:
		 * The PME bit is initialized from the EEPROM contents.
		 * PCI cards probably have PME disabled, but motherboard
		 * implementations may have PME set to enable WakeOnLan.
		 * With PME set the chip will scan incoming packets but
		 * nothing will be written to memory. */
		SavedClkRun = INL(dev, ClkRun);
		OUTL(dev, SavedClkRun & ~0x100, ClkRun);
	}
	return card_number;
}

/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
   The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses.  */

/* Delay between EEPROM clock transitions.
   No extra delay is needed with 33MHz PCI, but future 66MHz
   access may need a delay. */
#define eeprom_delay(ee_addr)	INL(dev, ee_addr)

enum EEPROM_Ctrl_Bits {
	EE_ShiftClk = 0x04,
	EE_DataIn = 0x01,
	EE_ChipSelect = 0x08,
	EE_DataOut = 0x02
};

#define EE_Write0 (EE_ChipSelect)
#define EE_Write1 (EE_ChipSelect | EE_DataIn)
/* The EEPROM commands include the alway-set leading bit. */
enum EEPROM_Cmds {
	EE_WrEnCmd = (4 << 6), EE_WriteCmd = (5 << 6),
	EE_ReadCmd = (6 << 6), EE_EraseCmd = (7 << 6),
};

#if 0
static void
write_eeprom(struct eth_device *dev, long addr, int location, short value)
{
	int i;
	int ee_addr = (typeof(ee_addr))addr;
	short wren_cmd = EE_WrEnCmd | 0x30; /*wren is 100 + 11XXXX*/
	short write_cmd = location | EE_WriteCmd;

#ifdef NATSEMI_DEBUG
	printf("write_eeprom: %08x, %04hx, %04hx\n",
		dev->iobase + ee_addr, write_cmd, value);
#endif
	/* Shift the write enable command bits out. */
	for (i = 9; i >= 0; i--) {
		short cmdval = (wren_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, cmdval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}

	OUTL(dev, 0, ee_addr); /*bring chip select low*/
	OUTL(dev, EE_ShiftClk, ee_addr);
	eeprom_delay(ee_addr);

	/* Shift the write command bits out. */
	for (i = 9; i >= 0; i--) {
		short cmdval = (write_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, cmdval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}

	for (i = 0; i < 16; i++) {
		short cmdval = (value & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, cmdval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}

	OUTL(dev, 0, ee_addr); /*bring chip select low*/
	OUTL(dev, EE_ShiftClk, ee_addr);
	for (i = 0; i < 200000; i++) {
		OUTL(dev, EE_Write0, ee_addr); /*poll for done*/
		if (INL(dev, ee_addr) & EE_DataOut) {
		    break; /*finished*/
		}
	}
	eeprom_delay(ee_addr);

	/* Terminate the EEPROM access. */
	OUTL(dev, EE_Write0, ee_addr);
	OUTL(dev, 0, ee_addr);
	return;
}
#endif

static int
read_eeprom(struct eth_device *dev, long addr, int location)
{
	int i;
	int retval = 0;
	int ee_addr = (typeof(ee_addr))addr;
	int read_cmd = location | EE_ReadCmd;

	OUTL(dev, EE_Write0, ee_addr);

	/* Shift the read command bits out. */
	for (i = 10; i >= 0; i--) {
		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
		OUTL(dev, dataval, ee_addr);
		eeprom_delay(ee_addr);
		OUTL(dev, dataval | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
	}
	OUTL(dev, EE_ChipSelect, ee_addr);
	eeprom_delay(ee_addr);

	for (i = 0; i < 16; i++) {
		OUTL(dev, EE_ChipSelect | EE_ShiftClk, ee_addr);
		eeprom_delay(ee_addr);
		retval |= (INL(dev, ee_addr) & EE_DataOut) ? 1 << i : 0;
		OUTL(dev, EE_ChipSelect, ee_addr);
		eeprom_delay(ee_addr);
	}

	/* Terminate the EEPROM access. */
	OUTL(dev, EE_Write0, ee_addr);
	OUTL(dev, 0, ee_addr);
#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
		printf("read_eeprom: %08x, %08x, retval %08x\n",
			dev->iobase + ee_addr, read_cmd, retval);
#endif
	return retval;
}

/*  MII transceiver control section.
	The 83815 series has an internal transceiver, and we present the
	management registers as if they were MII connected. */

static int
mdio_read(struct eth_device *dev, int phy_id, int location)
{
	if (phy_id == 1 && location < 32)
		return INL(dev, BasicControl+(location<<2))&0xffff;
	else
		return 0xffff;
}

/* Function: natsemi_init
 *
 * Description: resets the ethernet controller chip and configures
 *    registers and data structures required for sending and receiving packets.
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * returns:	int.
 */

static int
natsemi_init(struct eth_device *dev, bd_t * bis)
{

	natsemi_reset(dev);

	/* Disable PME:
	 * The PME bit is initialized from the EEPROM contents.
	 * PCI cards probably have PME disabled, but motherboard
	 * implementations may have PME set to enable WakeOnLan.
	 * With PME set the chip will scan incoming packets but
	 * nothing will be written to memory. */
	OUTL(dev, SavedClkRun & ~0x100, ClkRun);

	natsemi_init_rxfilter(dev);
	natsemi_init_txd(dev);
	natsemi_init_rxd(dev);

	/* Configure the PCI bus bursts and FIFO thresholds. */
	tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | (0x1002);
	rx_config = RxMxdma_256 | 0x20;

#ifdef NATSEMI_DEBUG
	printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
	printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
#endif
	OUTL(dev, tx_config, TxConfig);
	OUTL(dev, rx_config, RxConfig);

	natsemi_check_duplex(dev);
	natsemi_set_rx_mode(dev);

	OUTL(dev, (RxOn | TxOn), ChipCmd);
	return 1;
}

/*
 * Function: natsemi_reset
 *
 * Description: soft resets the controller chip
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */
static void
natsemi_reset(struct eth_device *dev)
{
	OUTL(dev, ChipReset, ChipCmd);

	/* On page 78 of the spec, they recommend some settings for "optimum
	   performance" to be done in sequence.  These settings optimize some
	   of the 100Mbit autodetection circuitry.  Also, we only want to do
	   this for rev C of the chip.  */
	if (INL(dev, SiliconRev) == 0x302) {
		OUTW(dev, 0x0001, PGSEL);
		OUTW(dev, 0x189C, PMDCSR);
		OUTW(dev, 0x0000, TSTDAT);
		OUTW(dev, 0x5040, DSPCFG);
		OUTW(dev, 0x008C, SDCFG);
	}
	/* Disable interrupts using the mask. */
	OUTL(dev, 0, IntrMask);
	OUTL(dev, 0, IntrEnable);
}

/* Function: natsemi_init_rxfilter
 *
 * Description: sets receive filter address to our MAC address
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * returns:   void.
 */

static void
natsemi_init_rxfilter(struct eth_device *dev)
{
	int i;

	for (i = 0; i < ETH_ALEN; i += 2) {
		OUTL(dev, i, RxFilterAddr);
		OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
		     RxFilterData);
	}
}

/*
 * Function: natsemi_init_txd
 *
 * Description: initializes the Tx descriptor
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * returns:   void.
 */

static void
natsemi_init_txd(struct eth_device *dev)
{
	txd.link = (u32) 0;
	txd.cmdsts = (u32) 0;
	txd.bufptr = (u32) & txb[0];

	/* load Transmit Descriptor Register */
	OUTL(dev, (u32) & txd, TxRingPtr);
#ifdef NATSEMI_DEBUG
	printf("natsemi_init_txd: TX descriptor reg loaded with: %#08X\n",
	       INL(dev, TxRingPtr));
#endif
}

/* Function: natsemi_init_rxd
 *
 * Description: initializes the Rx descriptor ring
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */

static void
natsemi_init_rxd(struct eth_device *dev)
{
	int i;

	cur_rx = 0;

	/* init RX descriptor */
	for (i = 0; i < NUM_RX_DESC; i++) {
		rxd[i].link =
		    cpu_to_le32((i + 1 <
				 NUM_RX_DESC) ? (u32) & rxd[i +
							    1] : (u32) &
				rxd[0]);
		rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
		rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
#ifdef NATSEMI_DEBUG
		printf
		    ("natsemi_init_rxd: rxd[%d]=%p link=%X cmdsts=%lX bufptr=%X\n",
			i, &rxd[i], le32_to_cpu(rxd[i].link),
				rxd[i].cmdsts, rxd[i].bufptr);
#endif
	}

	/* load Receive Descriptor Register */
	OUTL(dev, (u32) & rxd[0], RxRingPtr);

#ifdef NATSEMI_DEBUG
	printf("natsemi_init_rxd: RX descriptor register loaded with: %X\n",
	       INL(dev, RxRingPtr));
#endif
}

/* Function: natsemi_set_rx_mode
 *
 * Description:
 *    sets the receive mode to accept all broadcast packets and packets
 *    with our MAC address, and reject all multicast packets.
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */

static void
natsemi_set_rx_mode(struct eth_device *dev)
{
	u32 rx_mode = AcceptBroadcast | AcceptMyPhys;

	OUTL(dev, rx_mode, RxFilterAddr);
}

static void
natsemi_check_duplex(struct eth_device *dev)
{
	int duplex = INL(dev, ChipConfig) & FullDuplex ? 1 : 0;

#ifdef NATSEMI_DEBUG
	printf("%s: Setting %s-duplex based on negotiated link"
	       " capability.\n", dev->name, duplex ? "full" : "half");
#endif
	if (duplex) {
		rx_config |= RxAcceptTx;
		tx_config |= (TxCarrierIgn | TxHeartIgn);
	} else {
		rx_config &= ~RxAcceptTx;
		tx_config &= ~(TxCarrierIgn | TxHeartIgn);
	}
	OUTL(dev, tx_config, TxConfig);
	OUTL(dev, rx_config, RxConfig);
}

/* Function: natsemi_send
 *
 * Description: transmits a packet and waits for completion or timeout.
 *
 * Returns:   void.  */
static int natsemi_send(struct eth_device *dev, void *packet, int length)
{
	u32 i, status = 0;
	u32 tx_status = 0;
	u32 *tx_ptr = &tx_status;
	vu_long *res = (vu_long *)tx_ptr;

	/* Stop the transmitter */
	OUTL(dev, TxOff, ChipCmd);

#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
		printf("natsemi_send: sending %d bytes\n", (int) length);
#endif

	/* set the transmit buffer descriptor and enable Transmit State Machine */
	txd.link = cpu_to_le32(0);
	txd.bufptr = cpu_to_le32(phys_to_bus((u32) packet));
	txd.cmdsts = cpu_to_le32(DescOwn | length);

	/* load Transmit Descriptor Register */
	OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
	    printf("natsemi_send: TX descriptor register loaded with: %#08X\n",
	     INL(dev, TxRingPtr));
#endif
	/* restart the transmitter */
	OUTL(dev, TxOn, ChipCmd);

	for (i = 0;
	     (*res = le32_to_cpu(txd.cmdsts)) & DescOwn;
	     i++) {
		if (i >= TOUT_LOOP) {
			printf
			    ("%s: tx error buffer not ready: txd.cmdsts == %#X\n",
			     dev->name, tx_status);
			goto Done;
		}
	}

	if (!(tx_status & DescPktOK)) {
		printf("natsemi_send: Transmit error, Tx status %X.\n",
		       tx_status);
		goto Done;
	}

	status = 1;
      Done:
	return status;
}

/* Function: natsemi_poll
 *
 * Description: checks for a received packet and returns it if found.
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   1 if    packet was received.
 *            0 if no packet was received.
 *
 * Side effects:
 *            Returns (copies) the packet to the array dev->packet.
 *            Returns the length of the packet.
 */

static int
natsemi_poll(struct eth_device *dev)
{
	int retstat = 0;
	int length = 0;
	u32 rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);

	if (!(rx_status & (u32) DescOwn))
		return retstat;
#ifdef NATSEMI_DEBUG
	if (natsemi_debug)
		printf("natsemi_poll: got a packet: cur_rx:%d, status:%X\n",
		       cur_rx, rx_status);
#endif
	length = (rx_status & DSIZE) - CRC_SIZE;

	if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
		printf
		    ("natsemi_poll: Corrupted packet received, buffer status = %X\n",
		     rx_status);
		retstat = 0;
	} else {		/* give packet to higher level routine */
		NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
		retstat = 1;
	}

	/* return the descriptor and buffer to receive ring */
	rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
	rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);

	if (++cur_rx == NUM_RX_DESC)
		cur_rx = 0;

	/* re-enable the potentially idle receive state machine */
	OUTL(dev, RxOn, ChipCmd);

	return retstat;
}

/* Function: natsemi_disable
 *
 * Description: Turns off interrupts and stops Tx and Rx engines
 *
 * Arguments: struct eth_device *dev:          NIC data structure
 *
 * Returns:   void.
 */

static void
natsemi_disable(struct eth_device *dev)
{
	/* Disable interrupts using the mask. */
	OUTL(dev, 0, IntrMask);
	OUTL(dev, 0, IntrEnable);

	/* Stop the chip's Tx and Rx processes. */
	OUTL(dev, RxOff | TxOff, ChipCmd);

	/* Restore PME enable bit */
	OUTL(dev, SavedClkRun, ClkRun);
}