88pm800.c 14.7 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634
/*
 * Base driver for Marvell 88PM800
 *
 * Copyright (C) 2012 Marvell International Ltd.
 * Haojian Zhuang <haojian.zhuang@marvell.com>
 * Joseph(Yossi) Hanin <yhanin@marvell.com>
 * Qiao Zhou <zhouqiao@marvell.com>
 *
 * This file is subject to the terms and conditions of the GNU General
 * Public License. See the file "COPYING" in the main directory of this
 * archive for more details.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
#include <linux/mfd/88pm80x.h>
#include <linux/slab.h>

/* Interrupt Registers */
#define PM800_INT_STATUS1		(0x05)
#define PM800_ONKEY_INT_STS1		(1 << 0)
#define PM800_EXTON_INT_STS1		(1 << 1)
#define PM800_CHG_INT_STS1			(1 << 2)
#define PM800_BAT_INT_STS1			(1 << 3)
#define PM800_RTC_INT_STS1			(1 << 4)
#define PM800_CLASSD_OC_INT_STS1	(1 << 5)

#define PM800_INT_STATUS2		(0x06)
#define PM800_VBAT_INT_STS2		(1 << 0)
#define PM800_VSYS_INT_STS2		(1 << 1)
#define PM800_VCHG_INT_STS2		(1 << 2)
#define PM800_TINT_INT_STS2		(1 << 3)
#define PM800_GPADC0_INT_STS2	(1 << 4)
#define PM800_TBAT_INT_STS2		(1 << 5)
#define PM800_GPADC2_INT_STS2	(1 << 6)
#define PM800_GPADC3_INT_STS2	(1 << 7)

#define PM800_INT_STATUS3		(0x07)

#define PM800_INT_STATUS4		(0x08)
#define PM800_GPIO0_INT_STS4		(1 << 0)
#define PM800_GPIO1_INT_STS4		(1 << 1)
#define PM800_GPIO2_INT_STS4		(1 << 2)
#define PM800_GPIO3_INT_STS4		(1 << 3)
#define PM800_GPIO4_INT_STS4		(1 << 4)

#define PM800_INT_ENA_1		(0x09)
#define PM800_ONKEY_INT_ENA1		(1 << 0)
#define PM800_EXTON_INT_ENA1		(1 << 1)
#define PM800_CHG_INT_ENA1			(1 << 2)
#define PM800_BAT_INT_ENA1			(1 << 3)
#define PM800_RTC_INT_ENA1			(1 << 4)
#define PM800_CLASSD_OC_INT_ENA1	(1 << 5)

#define PM800_INT_ENA_2		(0x0A)
#define PM800_VBAT_INT_ENA2		(1 << 0)
#define PM800_VSYS_INT_ENA2		(1 << 1)
#define PM800_VCHG_INT_ENA2		(1 << 2)
#define PM800_TINT_INT_ENA2		(1 << 3)

#define PM800_INT_ENA_3		(0x0B)
#define PM800_GPADC0_INT_ENA3		(1 << 0)
#define PM800_GPADC1_INT_ENA3		(1 << 1)
#define PM800_GPADC2_INT_ENA3		(1 << 2)
#define PM800_GPADC3_INT_ENA3		(1 << 3)
#define PM800_GPADC4_INT_ENA3		(1 << 4)

#define PM800_INT_ENA_4		(0x0C)
#define PM800_GPIO0_INT_ENA4		(1 << 0)
#define PM800_GPIO1_INT_ENA4		(1 << 1)
#define PM800_GPIO2_INT_ENA4		(1 << 2)
#define PM800_GPIO3_INT_ENA4		(1 << 3)
#define PM800_GPIO4_INT_ENA4		(1 << 4)

/* number of INT_ENA & INT_STATUS regs */
#define PM800_INT_REG_NUM			(4)

/* Interrupt Number in 88PM800 */
enum {
	PM800_IRQ_ONKEY,	/*EN1b0 *//*0 */
	PM800_IRQ_EXTON,	/*EN1b1 */
	PM800_IRQ_CHG,		/*EN1b2 */
	PM800_IRQ_BAT,		/*EN1b3 */
	PM800_IRQ_RTC,		/*EN1b4 */
	PM800_IRQ_CLASSD,	/*EN1b5 *//*5 */
	PM800_IRQ_VBAT,		/*EN2b0 */
	PM800_IRQ_VSYS,		/*EN2b1 */
	PM800_IRQ_VCHG,		/*EN2b2 */
	PM800_IRQ_TINT,		/*EN2b3 */
	PM800_IRQ_GPADC0,	/*EN3b0 *//*10 */
	PM800_IRQ_GPADC1,	/*EN3b1 */
	PM800_IRQ_GPADC2,	/*EN3b2 */
	PM800_IRQ_GPADC3,	/*EN3b3 */
	PM800_IRQ_GPADC4,	/*EN3b4 */
	PM800_IRQ_GPIO0,	/*EN4b0 *//*15 */
	PM800_IRQ_GPIO1,	/*EN4b1 */
	PM800_IRQ_GPIO2,	/*EN4b2 */
	PM800_IRQ_GPIO3,	/*EN4b3 */
	PM800_IRQ_GPIO4,	/*EN4b4 *//*19 */
	PM800_MAX_IRQ,
};

/* PM800: generation identification number */
#define PM800_CHIP_GEN_ID_NUM	0x3

static const struct i2c_device_id pm80x_id_table[] = {
	{"88PM800", 0},
	{} /* NULL terminated */
};
MODULE_DEVICE_TABLE(i2c, pm80x_id_table);

static struct resource rtc_resources[] = {
	{
	 .name = "88pm80x-rtc",
	 .start = PM800_IRQ_RTC,
	 .end = PM800_IRQ_RTC,
	 .flags = IORESOURCE_IRQ,
	 },
};

static struct mfd_cell rtc_devs[] = {
	{
	 .name = "88pm80x-rtc",
	 .num_resources = ARRAY_SIZE(rtc_resources),
	 .resources = &rtc_resources[0],
	 .id = -1,
	 },
};

static struct resource onkey_resources[] = {
	{
	 .name = "88pm80x-onkey",
	 .start = PM800_IRQ_ONKEY,
	 .end = PM800_IRQ_ONKEY,
	 .flags = IORESOURCE_IRQ,
	 },
};

static const struct mfd_cell onkey_devs[] = {
	{
	 .name = "88pm80x-onkey",
	 .num_resources = 1,
	 .resources = &onkey_resources[0],
	 .id = -1,
	 },
};

static const struct mfd_cell regulator_devs[] = {
	{
	 .name = "88pm80x-regulator",
	 .id = -1,
	},
};

static const struct regmap_irq pm800_irqs[] = {
	/* INT0 */
	[PM800_IRQ_ONKEY] = {
		.mask = PM800_ONKEY_INT_ENA1,
	},
	[PM800_IRQ_EXTON] = {
		.mask = PM800_EXTON_INT_ENA1,
	},
	[PM800_IRQ_CHG] = {
		.mask = PM800_CHG_INT_ENA1,
	},
	[PM800_IRQ_BAT] = {
		.mask = PM800_BAT_INT_ENA1,
	},
	[PM800_IRQ_RTC] = {
		.mask = PM800_RTC_INT_ENA1,
	},
	[PM800_IRQ_CLASSD] = {
		.mask = PM800_CLASSD_OC_INT_ENA1,
	},
	/* INT1 */
	[PM800_IRQ_VBAT] = {
		.reg_offset = 1,
		.mask = PM800_VBAT_INT_ENA2,
	},
	[PM800_IRQ_VSYS] = {
		.reg_offset = 1,
		.mask = PM800_VSYS_INT_ENA2,
	},
	[PM800_IRQ_VCHG] = {
		.reg_offset = 1,
		.mask = PM800_VCHG_INT_ENA2,
	},
	[PM800_IRQ_TINT] = {
		.reg_offset = 1,
		.mask = PM800_TINT_INT_ENA2,
	},
	/* INT2 */
	[PM800_IRQ_GPADC0] = {
		.reg_offset = 2,
		.mask = PM800_GPADC0_INT_ENA3,
	},
	[PM800_IRQ_GPADC1] = {
		.reg_offset = 2,
		.mask = PM800_GPADC1_INT_ENA3,
	},
	[PM800_IRQ_GPADC2] = {
		.reg_offset = 2,
		.mask = PM800_GPADC2_INT_ENA3,
	},
	[PM800_IRQ_GPADC3] = {
		.reg_offset = 2,
		.mask = PM800_GPADC3_INT_ENA3,
	},
	[PM800_IRQ_GPADC4] = {
		.reg_offset = 2,
		.mask = PM800_GPADC4_INT_ENA3,
	},
	/* INT3 */
	[PM800_IRQ_GPIO0] = {
		.reg_offset = 3,
		.mask = PM800_GPIO0_INT_ENA4,
	},
	[PM800_IRQ_GPIO1] = {
		.reg_offset = 3,
		.mask = PM800_GPIO1_INT_ENA4,
	},
	[PM800_IRQ_GPIO2] = {
		.reg_offset = 3,
		.mask = PM800_GPIO2_INT_ENA4,
	},
	[PM800_IRQ_GPIO3] = {
		.reg_offset = 3,
		.mask = PM800_GPIO3_INT_ENA4,
	},
	[PM800_IRQ_GPIO4] = {
		.reg_offset = 3,
		.mask = PM800_GPIO4_INT_ENA4,
	},
};

static int device_gpadc_init(struct pm80x_chip *chip,
				       struct pm80x_platform_data *pdata)
{
	struct pm80x_subchip *subchip = chip->subchip;
	struct regmap *map = subchip->regmap_gpadc;
	int data = 0, mask = 0, ret = 0;

	if (!map) {
		dev_warn(chip->dev,
			 "Warning: gpadc regmap is not available!\n");
		return -EINVAL;
	}
	/*
	 * initialize GPADC without activating it turn on GPADC
	 * measurments
	 */
	ret = regmap_update_bits(map,
				 PM800_GPADC_MISC_CONFIG2,
				 PM800_GPADC_MISC_GPFSM_EN,
				 PM800_GPADC_MISC_GPFSM_EN);
	if (ret < 0)
		goto out;
	/*
	 * This function configures the ADC as requires for
	 * CP implementation.CP does not "own" the ADC configuration
	 * registers and relies on AP.
	 * Reason: enable automatic ADC measurements needed
	 * for CP to get VBAT and RF temperature readings.
	 */
	ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN1,
				 PM800_MEAS_EN1_VBAT, PM800_MEAS_EN1_VBAT);
	if (ret < 0)
		goto out;
	ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN2,
				 (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN),
				 (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN));
	if (ret < 0)
		goto out;

	/*
	 * the defult of PM800 is GPADC operates at 100Ks/s rate
	 * and Number of GPADC slots with active current bias prior
	 * to GPADC sampling = 1 slot for all GPADCs set for
	 * Temprature mesurmants
	 */
	mask = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
		PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);

	if (pdata && (pdata->batt_det == 0))
		data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
			PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
	else
		data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN2 |
			PM800_GPADC_GP_BIAS_EN3);

	ret = regmap_update_bits(map, PM800_GP_BIAS_ENA1, mask, data);
	if (ret < 0)
		goto out;

	dev_info(chip->dev, "pm800 device_gpadc_init: Done\n");
	return 0;

out:
	dev_info(chip->dev, "pm800 device_gpadc_init: Failed!\n");
	return ret;
}

static int device_onkey_init(struct pm80x_chip *chip,
				struct pm80x_platform_data *pdata)
{
	int ret;

	ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
			      ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
			      NULL);
	if (ret) {
		dev_err(chip->dev, "Failed to add onkey subdev\n");
		return ret;
	}

	return 0;
}

static int device_rtc_init(struct pm80x_chip *chip,
				struct pm80x_platform_data *pdata)
{
	int ret;

	if (pdata) {
		rtc_devs[0].platform_data = pdata->rtc;
		rtc_devs[0].pdata_size =
				pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0;
	}
	ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
			      ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
	if (ret) {
		dev_err(chip->dev, "Failed to add rtc subdev\n");
		return ret;
	}

	return 0;
}

static int device_regulator_init(struct pm80x_chip *chip,
					   struct pm80x_platform_data *pdata)
{
	int ret;

	ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
			      ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
	if (ret) {
		dev_err(chip->dev, "Failed to add regulator subdev\n");
		return ret;
	}

	return 0;
}

static int device_irq_init_800(struct pm80x_chip *chip)
{
	struct regmap *map = chip->regmap;
	unsigned long flags = IRQF_ONESHOT;
	int data, mask, ret = -EINVAL;

	if (!map || !chip->irq) {
		dev_err(chip->dev, "incorrect parameters\n");
		return -EINVAL;
	}

	/*
	 * irq_mode defines the way of clearing interrupt. it's read-clear by
	 * default.
	 */
	mask =
	    PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
	    PM800_WAKEUP2_INT_MASK;

	data = PM800_WAKEUP2_INT_CLEAR;
	ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);

	if (ret < 0)
		goto out;

	ret =
	    regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
				chip->regmap_irq_chip, &chip->irq_data);

out:
	return ret;
}

static void device_irq_exit_800(struct pm80x_chip *chip)
{
	regmap_del_irq_chip(chip->irq, chip->irq_data);
}

static struct regmap_irq_chip pm800_irq_chip = {
	.name = "88pm800",
	.irqs = pm800_irqs,
	.num_irqs = ARRAY_SIZE(pm800_irqs),

	.num_regs = 4,
	.status_base = PM800_INT_STATUS1,
	.mask_base = PM800_INT_ENA_1,
	.ack_base = PM800_INT_STATUS1,
	.mask_invert = 1,
};

static int pm800_pages_init(struct pm80x_chip *chip)
{
	struct pm80x_subchip *subchip;
	struct i2c_client *client = chip->client;

	int ret = 0;

	subchip = chip->subchip;
	if (!subchip || !subchip->power_page_addr || !subchip->gpadc_page_addr)
		return -ENODEV;

	/* PM800 block power page */
	subchip->power_page = i2c_new_dummy(client->adapter,
					    subchip->power_page_addr);
	if (subchip->power_page == NULL) {
		ret = -ENODEV;
		goto out;
	}

	subchip->regmap_power = devm_regmap_init_i2c(subchip->power_page,
						     &pm80x_regmap_config);
	if (IS_ERR(subchip->regmap_power)) {
		ret = PTR_ERR(subchip->regmap_power);
		dev_err(chip->dev,
			"Failed to allocate regmap_power: %d\n", ret);
		goto out;
	}

	i2c_set_clientdata(subchip->power_page, chip);

	/* PM800 block GPADC */
	subchip->gpadc_page = i2c_new_dummy(client->adapter,
					    subchip->gpadc_page_addr);
	if (subchip->gpadc_page == NULL) {
		ret = -ENODEV;
		goto out;
	}

	subchip->regmap_gpadc = devm_regmap_init_i2c(subchip->gpadc_page,
						     &pm80x_regmap_config);
	if (IS_ERR(subchip->regmap_gpadc)) {
		ret = PTR_ERR(subchip->regmap_gpadc);
		dev_err(chip->dev,
			"Failed to allocate regmap_gpadc: %d\n", ret);
		goto out;
	}
	i2c_set_clientdata(subchip->gpadc_page, chip);

out:
	return ret;
}

static void pm800_pages_exit(struct pm80x_chip *chip)
{
	struct pm80x_subchip *subchip;

	subchip = chip->subchip;

	if (subchip && subchip->power_page)
		i2c_unregister_device(subchip->power_page);

	if (subchip && subchip->gpadc_page)
		i2c_unregister_device(subchip->gpadc_page);
}

static int device_800_init(struct pm80x_chip *chip,
				     struct pm80x_platform_data *pdata)
{
	int ret;
	unsigned int val;

	/*
	 * alarm wake up bit will be clear in device_irq_init(),
	 * read before that
	 */
	ret = regmap_read(chip->regmap, PM800_RTC_CONTROL, &val);
	if (ret < 0) {
		dev_err(chip->dev, "Failed to read RTC register: %d\n", ret);
		goto out;
	}
	if (val & PM800_ALARM_WAKEUP) {
		if (pdata && pdata->rtc)
			pdata->rtc->rtc_wakeup = 1;
	}

	ret = device_gpadc_init(chip, pdata);
	if (ret < 0) {
		dev_err(chip->dev, "[%s]Failed to init gpadc\n", __func__);
		goto out;
	}

	chip->regmap_irq_chip = &pm800_irq_chip;

	ret = device_irq_init_800(chip);
	if (ret < 0) {
		dev_err(chip->dev, "[%s]Failed to init pm800 irq\n", __func__);
		goto out;
	}

	ret = device_onkey_init(chip, pdata);
	if (ret) {
		dev_err(chip->dev, "Failed to add onkey subdev\n");
		goto out_dev;
	}

	ret = device_rtc_init(chip, pdata);
	if (ret) {
		dev_err(chip->dev, "Failed to add rtc subdev\n");
		goto out;
	}

	ret = device_regulator_init(chip, pdata);
	if (ret) {
		dev_err(chip->dev, "Failed to add regulators subdev\n");
		goto out;
	}

	return 0;
out_dev:
	mfd_remove_devices(chip->dev);
	device_irq_exit_800(chip);
out:
	return ret;
}

static int pm800_probe(struct i2c_client *client,
				 const struct i2c_device_id *id)
{
	int ret = 0;
	struct pm80x_chip *chip;
	struct pm80x_platform_data *pdata = dev_get_platdata(&client->dev);
	struct pm80x_subchip *subchip;

	ret = pm80x_init(client);
	if (ret) {
		dev_err(&client->dev, "pm800_init fail\n");
		goto out_init;
	}

	chip = i2c_get_clientdata(client);

	/* init subchip for PM800 */
	subchip =
	    devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
			 GFP_KERNEL);
	if (!subchip) {
		ret = -ENOMEM;
		goto err_subchip_alloc;
	}

	/* pm800 has 2 addtional pages to support power and gpadc. */
	subchip->power_page_addr = client->addr + 1;
	subchip->gpadc_page_addr = client->addr + 2;
	chip->subchip = subchip;

	ret = pm800_pages_init(chip);
	if (ret) {
		dev_err(&client->dev, "pm800_pages_init failed!\n");
		goto err_device_init;
	}

	ret = device_800_init(chip, pdata);
	if (ret) {
		dev_err(chip->dev, "Failed to initialize 88pm800 devices\n");
		goto err_device_init;
	}

	if (pdata && pdata->plat_config)
		pdata->plat_config(chip, pdata);

	return 0;

err_device_init:
	pm800_pages_exit(chip);
err_subchip_alloc:
	pm80x_deinit();
out_init:
	return ret;
}

static int pm800_remove(struct i2c_client *client)
{
	struct pm80x_chip *chip = i2c_get_clientdata(client);

	mfd_remove_devices(chip->dev);
	device_irq_exit_800(chip);

	pm800_pages_exit(chip);
	pm80x_deinit();

	return 0;
}

static struct i2c_driver pm800_driver = {
	.driver = {
		.name = "88PM800",
		.owner = THIS_MODULE,
		.pm = &pm80x_pm_ops,
		},
	.probe = pm800_probe,
	.remove = pm800_remove,
	.id_table = pm80x_id_table,
};

static int __init pm800_i2c_init(void)
{
	return i2c_add_driver(&pm800_driver);
}
subsys_initcall(pm800_i2c_init);

static void __exit pm800_i2c_exit(void)
{
	i2c_del_driver(&pm800_driver);
}
module_exit(pm800_i2c_exit);

MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM800");
MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
MODULE_LICENSE("GPL");