dra7x-evm-lcd-osd101t2045.dtsi
2.64 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
/*
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
aliases {
display0 = &lcd;
display1 = &hdmi0;
};
lcd_bl: backlight {
compatible = "led-backlight";
leds = <&backlight_led>;
brightness-levels = <0 243 245 247 248 249 251 252 255>;
default-brightness-level = <8>;
enable-gpios = <&pcf_lcd 13 GPIO_ACTIVE_LOW>;
};
lcd: display {
/*
* TODO: Not a DPI panel, but a dummy DSI video mode panel.
* This needs to be changed later when we can support DSI VM
* panels properly.
*/
compatible = "osd,osd101t2045-53ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
panel-timing {
clock-frequency = <154000000>;
hactive = <1920>;
vactive = <1200>;
hfront-porch = <112>;
hback-porch = <32>;
hsync-len = <16>;
vfront-porch = <16>;
vback-porch = <16>;
vsync-len = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
port {
lcd_in: endpoint {
remote-endpoint = <&tc358768_out>;
};
};
};
tc358768_refclk: tc358768_refclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <20000000>;
};
};
&i2c1 {
tc358768@0e {
compatible = "toshiba,tc358768";
reg = <0x0e>;
clocks = <&tc358768_refclk>;
clock-names = "refclk";
reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tc358768_in: endpoint {
remote-endpoint = <&dpi_out>;
data-lines = <24>;
};
};
port@1 {
reg = <1>;
tc358768_out: endpoint {
remote-endpoint = <&lcd_in>;
lanes = <0 1 2 3 4 5 6 7 8 9>;
};
};
};
};
tlc59108: tlc59116@40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,tlc59108";
reg = <0x40>;
backlight_led: bl@2 {
label = "backlight";
reg = <0x2>;
};
};
pcf_display_board: gpio@27 {
compatible = "nxp,pcf8575";
reg = <0x27>;
gpio-controller;
#gpio-cells = <2>;
};
touchscreen: edt-ft5506@38 {
status = "okay";
compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
reg = <0x38>;
/* GPIO line is inverted before going to touch panel */
reset-gpios = <&pcf_display_board 5 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <1920>;
touchscreen-size-y = <1200>;
};
};
&dss {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpi_out: endpoint {
remote-endpoint = <&tc358768_in>;
data-lines = <24>;
};
};
};
};