clk-u300.c 37.7 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194
/*
 * U300 clock implementation
 * Copyright (C) 2007-2012 ST-Ericsson AB
 * License terms: GNU General Public License (GPL) version 2
 * Author: Linus Walleij <linus.walleij@stericsson.com>
 * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
 */
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
#include <linux/of.h>

/* APP side SYSCON registers */
/* CLK Control Register 16bit (R/W) */
#define U300_SYSCON_CCR						(0x0000)
#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
/* CLK Status Register 16bit (R/W) */
#define U300_SYSCON_CSR						(0x0004)
#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
/* Reset lines for SLOW devices 16bit (R/W) */
#define U300_SYSCON_RSR						(0x0014)
#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
/* Reset lines for FAST devices 16bit (R/W) */
#define U300_SYSCON_RFR						(0x0018)
#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
/* Reset lines for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_RRR						(0x001c)
#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
/* Clock enable for SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CESR					(0x0020)
#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
/* Clock enable for FAST peripherals 16bit (R/W) */
#define U300_SYSCON_CEFR					(0x0024)
#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
#define U300_SYSCON_CEFR_I2S1_CLK_EN				(0x0010)
#define U300_SYSCON_CEFR_I2S0_CLK_EN				(0x0008)
#define U300_SYSCON_CEFR_I2C1_CLK_EN				(0x0004)
#define U300_SYSCON_CEFR_I2C0_CLK_EN				(0x0002)
#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
/* Clock enable for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CERR					(0x0028)
#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
/* Single block clock enable 16bit (-/W) */
#define U300_SYSCON_SBCER					(0x002c)
#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
/* Single block clock disable 16bit (-/W) */
#define U300_SYSCON_SBCDR					(0x0030)
/* Same values as above for SBCER */
/* Clock force SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CFSR					(0x003c)
#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
/* Clock force FAST peripherals 16bit (R/W) */
#define U300_SYSCON_CFFR					(0x40)
/* Values not defined. Define if you want to use them. */
/* Clock force the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CFRR					(0x44)
#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
/* PLL208 Frequency Control 16bit (R/W) */
#define U300_SYSCON_PFCR					(0x48)
#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
/* Power Management Control 16bit (R/W) */
#define U300_SYSCON_PMCR					(0x50)
#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
/* Reset Out 16bit (R/W) */
#define U300_SYSCON_RCR						(0x6c)
#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
/* EMIF Slew Rate Control 16bit (R/W) */
#define U300_SYSCON_SRCLR					(0x70)
#define U300_SYSCON_SRCLR_MASK					(0x03FF)
#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
/* EMIF Clock Control Register 16bit (R/W) */
#define U300_SYSCON_ECCR					(0x0078)
#define U300_SYSCON_ECCR_MASK					(0x000F)
#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
#define U300_SYSCON_MMF0R					(0x90)
#define U300_SYSCON_MMF0R_MASK					(0x00FF)
#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
#define U300_SYSCON_MMF1R					(0x94)
#define U300_SYSCON_MMF1R_MASK					(0x00FF)
#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
#define U300_SYSCON_MMCR					(0x9C)
#define U300_SYSCON_MMCR_MASK					(0x0003)
#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
#define U300_SYSCON_S0CCR					(0x120)
#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
#define U300_SYSCON_S1CCR					(0x124)
#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
#define U300_SYSCON_S2CCR					(0x128)
#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
#define U300_SYSCON_PICR					(0x0130)
#define U300_SYSCON_PICR_MASK					(0x00FF)
#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
#define U300_SYSCON_PISR					(0x0134)
#define U300_SYSCON_PISR_MASK					(0x000F)
#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
#define U300_SYSCON_PICLR					(0x0138)
#define U300_SYSCON_PICLR_MASK					(0x000F)
#define U300_SYSCON_PICLR_RWMASK				(0x0000)
#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
/* Clock activity observability register 0 */
#define U300_SYSCON_C0OAR					(0x140)
#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
/* Clock activity observability register 1 */
#define U300_SYSCON_C1OAR					(0x144)
#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
/* Clock activity observability register 2 */
#define U300_SYSCON_C2OAR					(0x148)
#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)


/*
 * The clocking hierarchy currently looks like this.
 * NOTE: the idea is NOT to show how the clocks are routed on the chip!
 * The ideas is to show dependencies, so a clock higher up in the
 * hierarchy has to be on in order for another clock to be on. Now,
 * both CPU and DMA can actually be on top of the hierarchy, and that
 * is not modeled currently. Instead we have the backbone AMBA bus on
 * top. This bus cannot be programmed in any way but conceptually it
 * needs to be active for the bridges and devices to transport data.
 *
 * Please be aware that a few clocks are hw controlled, which mean that
 * the hw itself can turn on/off or change the rate of the clock when
 * needed!
 *
 *  AMBA bus
 *  |
 *  +- CPU
 *  +- FSMC NANDIF NAND Flash interface
 *  +- SEMI Shared Memory interface
 *  +- ISP Image Signal Processor (U335 only)
 *  +- CDS (U335 only)
 *  +- DMA Direct Memory Access Controller
 *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
 *  +- APEX
 *  +- VIDEO_ENC AVE2/3 Video Encoder
 *  +- XGAM Graphics Accelerator Controller
 *  +- AHB
 *  |
 *  +- ahb:0 AHB Bridge
 *  |  |
 *  |  +- ahb:1 INTCON Interrupt controller
 *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
 *  |  +- ahb:4 EMIF   External Memory interface
 *  |
 *  +- fast:0 FAST bridge
 *  |  |
 *  |  +- fast:1 MMCSD MMC/SD card reader controller
 *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
 *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
 *  |  +- fast:4 I2C0  I2C channel 0 controller
 *  |  +- fast:5 I2C1  I2C channel 1 controller
 *  |  +- fast:6 SPI   SPI controller
 *  |  +- fast:7 UART1 Secondary UART (U335 only)
 *  |
 *  +- slow:0 SLOW bridge
 *     |
 *     +- slow:1 SYSCON (not possible to control)
 *     +- slow:2 WDOG Watchdog
 *     +- slow:3 UART0 primary UART
 *     +- slow:4 TIMER_APP Application timer - used in Linux
 *     +- slow:5 KEYPAD controller
 *     +- slow:6 GPIO controller
 *     +- slow:7 RTC controller
 *     +- slow:8 BT Bus Tracer (not used currently)
 *     +- slow:9 EH Event Handler (not used currently)
 *     +- slow:a TIMER_ACC Access style timer (not used currently)
 *     +- slow:b PPM (U335 only, what is that?)
 */

/* Global syscon virtual base */
static void __iomem *syscon_vbase;

/**
 * struct clk_syscon - U300 syscon clock
 * @hw: corresponding clock hardware entry
 * @hw_ctrld: whether this clock is hardware controlled (for refcount etc)
 *	and does not need any magic pokes to be enabled/disabled
 * @reset: state holder, whether this block's reset line is asserted or not
 * @res_reg: reset line enable/disable flag register
 * @res_bit: bit for resetting or taking this consumer out of reset
 * @en_reg: clock line enable/disable flag register
 * @en_bit: bit for enabling/disabling this consumer clock line
 * @clk_val: magic value to poke in the register to enable/disable
 *	this one clock
 */
struct clk_syscon {
	struct clk_hw hw;
	bool hw_ctrld;
	bool reset;
	void __iomem *res_reg;
	u8 res_bit;
	void __iomem *en_reg;
	u8 en_bit;
	u16 clk_val;
};

#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw)

static DEFINE_SPINLOCK(syscon_resetreg_lock);

/*
 * Reset control functions. We remember if a block has been
 * taken out of reset and don't remove the reset assertion again
 * and vice versa. Currently we only remove resets so the
 * enablement function is defined out.
 */
static void syscon_block_reset_enable(struct clk_syscon *sclk)
{
	unsigned long iflags;
	u16 val;

	/* Not all blocks support resetting */
	if (!sclk->res_reg)
		return;
	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
	val = readw(sclk->res_reg);
	val |= BIT(sclk->res_bit);
	writew(val, sclk->res_reg);
	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
	sclk->reset = true;
}

static void syscon_block_reset_disable(struct clk_syscon *sclk)
{
	unsigned long iflags;
	u16 val;

	/* Not all blocks support resetting */
	if (!sclk->res_reg)
		return;
	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
	val = readw(sclk->res_reg);
	val &= ~BIT(sclk->res_bit);
	writew(val, sclk->res_reg);
	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
	sclk->reset = false;
}

static int syscon_clk_prepare(struct clk_hw *hw)
{
	struct clk_syscon *sclk = to_syscon(hw);

	/* If the block is in reset, bring it out */
	if (sclk->reset)
		syscon_block_reset_disable(sclk);
	return 0;
}

static void syscon_clk_unprepare(struct clk_hw *hw)
{
	struct clk_syscon *sclk = to_syscon(hw);

	/* Please don't force the console into reset */
	if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
		return;
	/* When unpreparing, force block into reset */
	if (!sclk->reset)
		syscon_block_reset_enable(sclk);
}

static int syscon_clk_enable(struct clk_hw *hw)
{
	struct clk_syscon *sclk = to_syscon(hw);

	/* Don't touch the hardware controlled clocks */
	if (sclk->hw_ctrld)
		return 0;
	/* These cannot be controlled */
	if (sclk->clk_val == 0xFFFFU)
		return 0;

	writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER);
	return 0;
}

static void syscon_clk_disable(struct clk_hw *hw)
{
	struct clk_syscon *sclk = to_syscon(hw);

	/* Don't touch the hardware controlled clocks */
	if (sclk->hw_ctrld)
		return;
	if (sclk->clk_val == 0xFFFFU)
		return;
	/* Please don't disable the console port */
	if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
		return;

	writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR);
}

static int syscon_clk_is_enabled(struct clk_hw *hw)
{
	struct clk_syscon *sclk = to_syscon(hw);
	u16 val;

	/* If no enable register defined, it's always-on */
	if (!sclk->en_reg)
		return 1;

	val = readw(sclk->en_reg);
	val &= BIT(sclk->en_bit);

	return val ? 1 : 0;
}

static u16 syscon_get_perf(void)
{
	u16 val;

	val = readw(syscon_vbase + U300_SYSCON_CCR);
	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
	return val;
}

static unsigned long
syscon_clk_recalc_rate(struct clk_hw *hw,
		       unsigned long parent_rate)
{
	struct clk_syscon *sclk = to_syscon(hw);
	u16 perf = syscon_get_perf();

	switch(sclk->clk_val) {
	case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN:
	case U300_SYSCON_SBCER_I2C0_CLK_EN:
	case U300_SYSCON_SBCER_I2C1_CLK_EN:
	case U300_SYSCON_SBCER_MMC_CLK_EN:
	case U300_SYSCON_SBCER_SPI_CLK_EN:
		/* The FAST clocks have one progression */
		switch(perf) {
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
			return 13000000;
		default:
			return parent_rate; /* 26 MHz */
		}
	case U300_SYSCON_SBCER_DMAC_CLK_EN:
	case U300_SYSCON_SBCER_NANDIF_CLK_EN:
	case U300_SYSCON_SBCER_XGAM_CLK_EN:
		/* AMBA interconnect peripherals */
		switch(perf) {
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
			return 6500000;
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
			return 26000000;
		default:
			return parent_rate; /* 52 MHz */
		}
	case U300_SYSCON_SBCER_SEMI_CLK_EN:
	case U300_SYSCON_SBCER_EMIF_CLK_EN:
		/* EMIF speeds */
		switch(perf) {
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
			return 13000000;
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
			return 52000000;
		default:
			return 104000000;
		}
	case U300_SYSCON_SBCER_CPU_CLK_EN:
		/* And the fast CPU clock */
		switch(perf) {
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
			return 13000000;
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
			return 52000000;
		case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
			return 104000000;
		default:
			return parent_rate; /* 208 MHz */
		}
	default:
		/*
		 * The SLOW clocks and default just inherit the rate of
		 * their parent (typically PLL13 13 MHz).
		 */
		return parent_rate;
	}
}

static long
syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate,
		      unsigned long *prate)
{
	struct clk_syscon *sclk = to_syscon(hw);

	if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
		return *prate;
	/* We really only support setting the rate of the CPU clock */
	if (rate <= 13000000)
		return 13000000;
	if (rate <= 52000000)
		return 52000000;
	if (rate <= 104000000)
		return 104000000;
	return 208000000;
}

static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate,
			       unsigned long parent_rate)
{
	struct clk_syscon *sclk = to_syscon(hw);
	u16 val;

	/* We only support setting the rate of the CPU clock */
	if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
		return -EINVAL;
	switch (rate) {
	case 13000000:
		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
		break;
	case 52000000:
		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
		break;
	case 104000000:
		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
		break;
	case 208000000:
		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
		break;
	default:
		return -EINVAL;
	}
	val |= readw(syscon_vbase + U300_SYSCON_CCR) &
		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
	writew(val, syscon_vbase + U300_SYSCON_CCR);
	return 0;
}

static const struct clk_ops syscon_clk_ops = {
	.prepare = syscon_clk_prepare,
	.unprepare = syscon_clk_unprepare,
	.enable = syscon_clk_enable,
	.disable = syscon_clk_disable,
	.is_enabled = syscon_clk_is_enabled,
	.recalc_rate = syscon_clk_recalc_rate,
	.round_rate = syscon_clk_round_rate,
	.set_rate = syscon_clk_set_rate,
};

static struct clk * __init
syscon_clk_register(struct device *dev, const char *name,
		    const char *parent_name, unsigned long flags,
		    bool hw_ctrld,
		    void __iomem *res_reg, u8 res_bit,
		    void __iomem *en_reg, u8 en_bit,
		    u16 clk_val)
{
	struct clk *clk;
	struct clk_syscon *sclk;
	struct clk_init_data init;

	sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL);
	if (!sclk) {
		pr_err("could not allocate syscon clock %s\n",
			name);
		return ERR_PTR(-ENOMEM);
	}
	init.name = name;
	init.ops = &syscon_clk_ops;
	init.flags = flags;
	init.parent_names = (parent_name ? &parent_name : NULL);
	init.num_parents = (parent_name ? 1 : 0);
	sclk->hw.init = &init;
	sclk->hw_ctrld = hw_ctrld;
	/* Assume the block is in reset at registration */
	sclk->reset = true;
	sclk->res_reg = res_reg;
	sclk->res_bit = res_bit;
	sclk->en_reg = en_reg;
	sclk->en_bit = en_bit;
	sclk->clk_val = clk_val;

	clk = clk_register(dev, &sclk->hw);
	if (IS_ERR(clk))
		kfree(sclk);

	return clk;
}

#define U300_CLK_TYPE_SLOW 0
#define U300_CLK_TYPE_FAST 1
#define U300_CLK_TYPE_REST 2

/**
 * struct u300_clock - defines the bits and pieces for a certain clock
 * @type: the clock type, slow fast or rest
 * @id: the bit in the slow/fast/rest register for this clock
 * @hw_ctrld: whether the clock is hardware controlled
 * @clk_val: a value to poke in the one-write enable/disable registers
 */
struct u300_clock {
	u8 type;
	u8 id;
	bool hw_ctrld;
	u16 clk_val;
};

static struct u300_clock const u300_clk_lookup[] __initconst = {
	{
		.type = U300_CLK_TYPE_REST,
		.id = 3,
		.hw_ctrld = true,
		.clk_val = U300_SYSCON_SBCER_CPU_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_REST,
		.id = 4,
		.hw_ctrld = true,
		.clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_REST,
		.id = 5,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_REST,
		.id = 6,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_REST,
		.id = 8,
		.hw_ctrld = true,
		.clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_REST,
		.id = 9,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_REST,
		.id = 10,
		.hw_ctrld = true,
		.clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_REST,
		.id = 12,
		.hw_ctrld = false,
		/* INTCON: cannot be enabled, just taken out of reset */
		.clk_val = 0xFFFFU,
	},
	{
		.type = U300_CLK_TYPE_FAST,
		.id = 0,
		.hw_ctrld = true,
		.clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_FAST,
		.id = 1,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_FAST,
		.id = 2,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_FAST,
		.id = 5,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_MMC_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_FAST,
		.id = 6,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_SPI_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_SLOW,
		.id = 0,
		.hw_ctrld = true,
		.clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_SLOW,
		.id = 1,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_SLOW,
		.id = 4,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_SLOW,
		.id = 6,
		.hw_ctrld = true,
		/* No clock enable register bit */
		.clk_val = 0xFFFFU,
	},
	{
		.type = U300_CLK_TYPE_SLOW,
		.id = 7,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
	},
	{
		.type = U300_CLK_TYPE_SLOW,
		.id = 8,
		.hw_ctrld = false,
		.clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
	},
};

static void __init of_u300_syscon_clk_init(struct device_node *np)
{
	struct clk *clk = ERR_PTR(-EINVAL);
	const char *clk_name = np->name;
	const char *parent_name;
	void __iomem *res_reg;
	void __iomem *en_reg;
	u32 clk_type;
	u32 clk_id;
	int i;

	if (of_property_read_u32(np, "clock-type", &clk_type)) {
		pr_err("%s: syscon clock \"%s\" missing clock-type property\n",
		       __func__, clk_name);
		return;
	}
	if (of_property_read_u32(np, "clock-id", &clk_id)) {
		pr_err("%s: syscon clock \"%s\" missing clock-id property\n",
		       __func__, clk_name);
		return;
	}
	parent_name = of_clk_get_parent_name(np, 0);

	switch (clk_type) {
	case U300_CLK_TYPE_SLOW:
		res_reg = syscon_vbase + U300_SYSCON_RSR;
		en_reg = syscon_vbase + U300_SYSCON_CESR;
		break;
	case U300_CLK_TYPE_FAST:
		res_reg = syscon_vbase + U300_SYSCON_RFR;
		en_reg = syscon_vbase + U300_SYSCON_CEFR;
		break;
	case U300_CLK_TYPE_REST:
		res_reg = syscon_vbase + U300_SYSCON_RRR;
		en_reg = syscon_vbase + U300_SYSCON_CERR;
		break;
	default:
		pr_err("unknown clock type %x specified\n", clk_type);
		return;
	}

	for (i = 0; i < ARRAY_SIZE(u300_clk_lookup); i++) {
		const struct u300_clock *u3clk = &u300_clk_lookup[i];

		if (u3clk->type == clk_type && u3clk->id == clk_id)
			clk = syscon_clk_register(NULL,
						  clk_name, parent_name,
						  0, u3clk->hw_ctrld,
						  res_reg, u3clk->id,
						  en_reg, u3clk->id,
						  u3clk->clk_val);
	}

	if (!IS_ERR(clk)) {
		of_clk_add_provider(np, of_clk_src_simple_get, clk);

		/*
		 * Some few system clocks - device tree does not
		 * represent clocks without a corresponding device node.
		 * for now we add these three clocks here.
		 */
		if (clk_type == U300_CLK_TYPE_REST && clk_id == 5)
			clk_register_clkdev(clk, NULL, "pl172");
		if (clk_type == U300_CLK_TYPE_REST && clk_id == 9)
			clk_register_clkdev(clk, NULL, "semi");
		if (clk_type == U300_CLK_TYPE_REST && clk_id == 12)
			clk_register_clkdev(clk, NULL, "intcon");
	}
}

/**
 * struct clk_mclk - U300 MCLK clock (MMC/SD clock)
 * @hw: corresponding clock hardware entry
 * @is_mspro: if this is the memory stick clock rather than MMC/SD
 */
struct clk_mclk {
	struct clk_hw hw;
	bool is_mspro;
};

#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw)

static int mclk_clk_prepare(struct clk_hw *hw)
{
	struct clk_mclk *mclk = to_mclk(hw);
	u16 val;

	/* The MMC and MSPRO clocks need some special set-up */
	if (!mclk->is_mspro) {
		/* Set default MMC clock divisor to 18.9 MHz */
		writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R);
		val = readw(syscon_vbase + U300_SYSCON_MMCR);
		/* Disable the MMC feedback clock */
		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
		/* Disable MSPRO frequency */
		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
		writew(val, syscon_vbase + U300_SYSCON_MMCR);
	} else {
		val = readw(syscon_vbase + U300_SYSCON_MMCR);
		/* Disable the MMC feedback clock */
		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
		/* Enable MSPRO frequency */
		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
		writew(val, syscon_vbase + U300_SYSCON_MMCR);
	}

	return 0;
}

static unsigned long
mclk_clk_recalc_rate(struct clk_hw *hw,
		     unsigned long parent_rate)
{
	u16 perf = syscon_get_perf();

	switch (perf) {
	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
		/*
		 * Here, the 208 MHz PLL gets shut down and the always
		 * on 13 MHz PLL used for RTC etc kicks into use
		 * instead.
		 */
		return 13000000;
	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
	{
		/*
		 * This clock is under program control. The register is
		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
		 * high, bit 3-0 gives cycles-1 to count low. Distribute
		 * these with no more than 1 cycle difference between
		 * low and high and add low and high to get the actual
		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
		 * divide by 1 and 1 so the highest frequency possible
		 * is 104 MHz.
		 *
		 * e.g. 0x54 =>
		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
		 */
		u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) &
			U300_SYSCON_MMF0R_MASK;
		switch (val) {
		case 0x0054:
			return 18900000;
		case 0x0044:
			return 20800000;
		case 0x0043:
			return 23100000;
		case 0x0033:
			return 26000000;
		case 0x0032:
			return 29700000;
		case 0x0022:
			return 34700000;
		case 0x0021:
			return 41600000;
		case 0x0011:
			return 52000000;
		case 0x0000:
			return 104000000;
		default:
			break;
		}
	}
	default:
		break;
	}
	return parent_rate;
}

static long
mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate,
		    unsigned long *prate)
{
	if (rate <= 18900000)
		return 18900000;
	if (rate <= 20800000)
		return 20800000;
	if (rate <= 23100000)
		return 23100000;
	if (rate <= 26000000)
		return 26000000;
	if (rate <= 29700000)
		return 29700000;
	if (rate <= 34700000)
		return 34700000;
	if (rate <= 41600000)
		return 41600000;
	/* Highest rate */
	return 52000000;
}

static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate,
			     unsigned long parent_rate)
{
	u16 val;
	u16 reg;

	switch (rate) {
	case 18900000:
		val = 0x0054;
		break;
	case 20800000:
		val = 0x0044;
		break;
	case 23100000:
		val = 0x0043;
		break;
	case 26000000:
		val = 0x0033;
		break;
	case 29700000:
		val = 0x0032;
		break;
	case 34700000:
		val = 0x0022;
		break;
	case 41600000:
		val = 0x0021;
		break;
	case 52000000:
		val = 0x0011;
		break;
	case 104000000:
		val = 0x0000;
		break;
	default:
		return -EINVAL;
	}

	reg = readw(syscon_vbase + U300_SYSCON_MMF0R) &
		~U300_SYSCON_MMF0R_MASK;
	writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R);
	return 0;
}

static const struct clk_ops mclk_ops = {
	.prepare = mclk_clk_prepare,
	.recalc_rate = mclk_clk_recalc_rate,
	.round_rate = mclk_clk_round_rate,
	.set_rate = mclk_clk_set_rate,
};

static struct clk * __init
mclk_clk_register(struct device *dev, const char *name,
		  const char *parent_name, bool is_mspro)
{
	struct clk *clk;
	struct clk_mclk *mclk;
	struct clk_init_data init;

	mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL);
	if (!mclk) {
		pr_err("could not allocate MMC/SD clock %s\n",
		       name);
		return ERR_PTR(-ENOMEM);
	}
	init.name = "mclk";
	init.ops = &mclk_ops;
	init.flags = 0;
	init.parent_names = (parent_name ? &parent_name : NULL);
	init.num_parents = (parent_name ? 1 : 0);
	mclk->hw.init = &init;
	mclk->is_mspro = is_mspro;

	clk = clk_register(dev, &mclk->hw);
	if (IS_ERR(clk))
		kfree(mclk);

	return clk;
}

static void __init of_u300_syscon_mclk_init(struct device_node *np)
{
	struct clk *clk = ERR_PTR(-EINVAL);
	const char *clk_name = np->name;
	const char *parent_name;

	parent_name = of_clk_get_parent_name(np, 0);
	clk = mclk_clk_register(NULL, clk_name, parent_name, false);
	if (!IS_ERR(clk))
		of_clk_add_provider(np, of_clk_src_simple_get, clk);
}

static const struct of_device_id u300_clk_match[] __initconst = {
	{
		.compatible = "fixed-clock",
		.data = of_fixed_clk_setup,
	},
	{
		.compatible = "fixed-factor-clock",
		.data = of_fixed_factor_clk_setup,
	},
	{
		.compatible = "stericsson,u300-syscon-clk",
		.data = of_u300_syscon_clk_init,
	},
	{
		.compatible = "stericsson,u300-syscon-mclk",
		.data = of_u300_syscon_mclk_init,
	},
};


void __init u300_clk_init(void __iomem *base)
{
	u16 val;

	syscon_vbase = base;

	/* Set system to run at PLL208, max performance, a known state. */
	val = readw(syscon_vbase + U300_SYSCON_CCR);
	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
	writew(val, syscon_vbase + U300_SYSCON_CCR);
	/* Wait for the PLL208 to lock if not locked in yet */
	while (!(readw(syscon_vbase + U300_SYSCON_CSR) &
		 U300_SYSCON_CSR_PLL208_LOCK_IND));

	/* Power management enable */
	val = readw(syscon_vbase + U300_SYSCON_PMCR);
	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
	writew(val, syscon_vbase + U300_SYSCON_PMCR);

	of_clk_init(u300_clk_match);
}