more misc typo fixes

Signed-off-by: Adrian Bunk <bunk@stusta.de>

more misc typo fixes
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Matt LaPlante · Adrian Bunk
1 parent 095096038d
Showing 13 changed files with 16 additions and 16 deletions Side-by-side Diff
arch/cris/arch-v10/drivers/Kconfig
arch/cris/arch-v32/Kconfig
arch/m68knommu/Kconfig
arch/um/Kconfig
arch/x86_64/Kconfig
drivers/input/joystick/Kconfig
fs/Kconfig
mm/Kconfig
net/ipv4/Kconfig
net/ipv4/ipvs/Kconfig
net/ipv4/netfilter/Kconfig
security/selinux/Kconfig
sound/oss/Kconfig
@@ -550,7 +550,7 @@
 	select BLK_DEV_IDEDMA
 	help
 	  Enable this to get support for ATA/IDE.
-	  You can't use paralell ports or SCSI ports
+	  You can't use parallel ports or SCSI ports
 	  at the same time.
  
  
@@ -744,7 +744,7 @@
 	default "FF"
 	help
 	  This is a bitmask with information of what bits in PA that a user
-	  can change change the value on using ioctl's.
+	  can change the value on using ioctl's.
 	  Bit set = changeable.
 	  You probably want 00 here.
  
@@ -162,7 +162,7 @@
 	depends on ETRAX_ARCH_V32
 	default "0"
 	help
-	  SDRAM configuration for group 1. The defult value is 0
+	  SDRAM configuration for group 1. The default value is 0
 	  because group 1 is not used in the default configuration,
 	  described in the help for SDRAM_GRP0_CONFIG.
  
@@ -161,8 +161,8 @@
 	  frequency, it may or may not be the same as the external clock
 	  crystal fitted to your board. Some processors have an internal
 	  PLL and can have their frequency programmed at run time, others
-	  use internal dividers. In gernal the kernel won't setup a PLL
-	  if it is fitted (there are some expections). This value will be
+	  use internal dividers. In general the kernel won't setup a PLL
+	  if it is fitted (there are some exceptions). This value will be
 	  specific to the exact CPU that you are using.
  
 config CLOCK_DIV
@@ -257,7 +257,7 @@
 	UML and spend long times with UML stopped at a breakpoint.  In this
 	case, when UML is restarted, it will call the timer enough times to make
 	up for the time spent at the breakpoint.  This could result in a
-	noticable lag.  If this is a problem, then disable this option.
+	noticeable lag.  If this is a problem, then disable this option.
  
 endmenu
  
@@ -310,7 +310,7 @@
        help
 	 Enable K8 NUMA node topology detection.  You should say Y here if
 	 you have a multi processor AMD K8 system. This uses an old
-	 method to read the NUMA configurtion directly from the builtin
+	 method to read the NUMA configuration directly from the builtin
 	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
 	 instead, which also takes priority if both are compiled in.   
  
@@ -32,7 +32,7 @@
 	  module will be called analog.
  
 config JOYSTICK_A3D
-	tristate "Assasin 3D and MadCatz Panther devices"
+	tristate "Assassin 3D and MadCatz Panther devices"
 	select GAMEPORT
 	help
 	  Say Y here if you have an FPGaming or MadCatz controller using the
@@ -1032,7 +1032,7 @@
 	  on files and directories, and database-like indeces on selected
 	  attributes. (Also note that this driver doesn't make those features
 	  available at this time). It is a 64 bit filesystem, so it supports
-	  extremly large volumes and files.
+	  extremely large volumes and files.
  
 	  If you use this filesystem, you should also say Y to at least one
 	  of the NLS (native language support) options below.
@@ -104,7 +104,7 @@
 	def_bool n
  
 #
-# Architectecture platforms which require a two level mem_section in SPARSEMEM
+# Architecture platforms which require a two level mem_section in SPARSEMEM
 # must select this option. This is usually for architecture platforms with
 # an extremely sparse physical address space.
 #
@@ -64,7 +64,7 @@
 config IP_FIB_TRIE
 	bool "FIB_TRIE"
 	---help---
-	Use new experimental LC-trie as FIB lookup algoritm. 
+	Use new experimental LC-trie as FIB lookup algorithm. 
         This improves lookup performance if you have a large
 	number of routes.
  
@@ -526,7 +526,7 @@
 	---help---
 	TCP-Hybla is a sender-side only change that eliminates penalization of
 	long-RTT, large-bandwidth connections, like when satellite legs are
-	involved, expecially when sharing a common bottleneck with normal
+	involved, especially when sharing a common bottleneck with normal
 	terrestrial connections.
  
 config TCP_CONG_VEGAS
@@ -81,7 +81,7 @@
 	bool "ESP load balancing support"
 	depends on IP_VS
 	---help---
-	  This option enables support for load balancing ESP (Encapsultion
+	  This option enables support for load balancing ESP (Encapsulation
 	  Security Payload) transport protocol. Say Y if unsure.
  
 config	IP_VS_PROTO_AH
@@ -373,7 +373,7 @@
 	  daemon using netlink multicast sockets; unlike the LOG target
 	  which can only be viewed through syslog.
  
-	  The apropriate userspace logging daemon (ulogd) may be obtained from
+	  The appropriate userspace logging daemon (ulogd) may be obtained from
 	  <http://www.gnumonks.org/projects/ulogd/>
  
 	  To compile it as a module, choose M here.  If unsure, say N.
@@ -112,7 +112,7 @@
 	  your distribution will provide these and enable the new controls
 	  in the kernel they also distribute.
  
-	  Note that this option can be overriden at boot with the
+	  Note that this option can be overridden at boot with the
 	  selinux_compat_net parameter, and after boot via
 	  /selinux/compat_net.  See Documentation/kernel-parameters.txt
 	  for details on this parameter.
@@ -647,7 +647,7 @@
 	  command line.
  
 config PSS_MIXER
-	bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
+	bool "Enable PSS mixer (Beethoven ADSP-16 and other compatible)"
 	depends on SOUND_PSS
 	help
 	  Answer Y for Beethoven ADSP-16. You may try to say Y also for other
...	...	@@ -550,7 +550,7 @@
550	550	select BLK_DEV_IDEDMA
551	551	help
552	552	Enable this to get support for ATA/IDE.
553		- You can't use paralell ports or SCSI ports
	553	+ You can't use parallel ports or SCSI ports
554	554	at the same time.
555	555
556	556
...	...	@@ -744,7 +744,7 @@
744	744	default "FF"
745	745	help
746	746	This is a bitmask with information of what bits in PA that a user
747		- can change change the value on using ioctl's.
	747	+ can change the value on using ioctl's.
748	748	Bit set = changeable.
749	749	You probably want 00 here.
750	750
...	...	@@ -162,7 +162,7 @@
162	162	depends on ETRAX_ARCH_V32
163	163	default "0"
164	164	help
165		- SDRAM configuration for group 1. The defult value is 0
	165	+ SDRAM configuration for group 1. The default value is 0
166	166	because group 1 is not used in the default configuration,
167	167	described in the help for SDRAM_GRP0_CONFIG.
168	168
...	...	@@ -161,8 +161,8 @@
161	161	frequency, it may or may not be the same as the external clock
162	162	crystal fitted to your board. Some processors have an internal
163	163	PLL and can have their frequency programmed at run time, others
164		- use internal dividers. In gernal the kernel won't setup a PLL
165		- if it is fitted (there are some expections). This value will be
	164	+ use internal dividers. In general the kernel won't setup a PLL
	165	+ if it is fitted (there are some exceptions). This value will be
166	166	specific to the exact CPU that you are using.
167	167
168	168	config CLOCK_DIV
...	...	@@ -257,7 +257,7 @@
257	257	UML and spend long times with UML stopped at a breakpoint. In this
258	258	case, when UML is restarted, it will call the timer enough times to make
259	259	up for the time spent at the breakpoint. This could result in a
260		- noticable lag. If this is a problem, then disable this option.
	260	+ noticeable lag. If this is a problem, then disable this option.
261	261
262	262	endmenu
263	263
...	...	@@ -310,7 +310,7 @@
310	310	help
311	311	Enable K8 NUMA node topology detection. You should say Y here if
312	312	you have a multi processor AMD K8 system. This uses an old
313		- method to read the NUMA configurtion directly from the builtin
	313	+ method to read the NUMA configuration directly from the builtin
314	314	Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
315	315	instead, which also takes priority if both are compiled in.
316	316
...	...	@@ -32,7 +32,7 @@
32	32	module will be called analog.
33	33
34	34	config JOYSTICK_A3D
35		- tristate "Assasin 3D and MadCatz Panther devices"
	35	+ tristate "Assassin 3D and MadCatz Panther devices"
36	36	select GAMEPORT
37	37	help
38	38	Say Y here if you have an FPGaming or MadCatz controller using the
...	...	@@ -1032,7 +1032,7 @@
1032	1032	on files and directories, and database-like indeces on selected
1033	1033	attributes. (Also note that this driver doesn't make those features
1034	1034	available at this time). It is a 64 bit filesystem, so it supports
1035		- extremly large volumes and files.
	1035	+ extremely large volumes and files.
1036	1036
1037	1037	If you use this filesystem, you should also say Y to at least one
1038	1038	of the NLS (native language support) options below.
...	...	@@ -104,7 +104,7 @@
104	104	def_bool n
105	105
106	106	#
107		-# Architectecture platforms which require a two level mem_section in SPARSEMEM
	107	+# Architecture platforms which require a two level mem_section in SPARSEMEM
108	108	# must select this option. This is usually for architecture platforms with
109	109	# an extremely sparse physical address space.
110	110	#
...	...	@@ -64,7 +64,7 @@
64	64	config IP_FIB_TRIE
65	65	bool "FIB_TRIE"
66	66	---help---
67		- Use new experimental LC-trie as FIB lookup algoritm.
	67	+ Use new experimental LC-trie as FIB lookup algorithm.
68	68	This improves lookup performance if you have a large
69	69	number of routes.
70	70
...	...	@@ -526,7 +526,7 @@
526	526	---help---
527	527	TCP-Hybla is a sender-side only change that eliminates penalization of
528	528	long-RTT, large-bandwidth connections, like when satellite legs are
529		- involved, expecially when sharing a common bottleneck with normal
	529	+ involved, especially when sharing a common bottleneck with normal
530	530	terrestrial connections.
531	531
532	532	config TCP_CONG_VEGAS
...	...	@@ -81,7 +81,7 @@
81	81	bool "ESP load balancing support"
82	82	depends on IP_VS
83	83	---help---
84		- This option enables support for load balancing ESP (Encapsultion
	84	+ This option enables support for load balancing ESP (Encapsulation
85	85	Security Payload) transport protocol. Say Y if unsure.
86	86
87	87	config IP_VS_PROTO_AH