Eric Lee / smarc-ti-linux-kernel

29 Jun, 2006

1 commit

23 Jun, 2006

2 commits

  • 2da132646   [PATCH] fs/fat/misc.c: unexport fat_sync_bhs ... Browse Code »

    Signed-off-by: Adrian Bunk
    Acked-by: OGAWA Hirofumi
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Adrian Bunk
     
  • 726c33422   [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry ... Browse Code »

    Give the statfs superblock operation a dentry pointer rather than a superblock
    pointer.

    This complements the get_sb() patch. That reduced the significance of
    sb->s_root, allowing NFS to place a fake root there. However, NFS does
    require a dentry to use as a target for the statfs operation. This permits
    the root in the vfsmount to be used instead.

    linux/mount.h has been added where necessary to make allyesconfig build
    successfully.

    Interest has also been expressed for use with the FUSE and XFS filesystems.

    Signed-off-by: David Howells
    Acked-by: Al Viro
    Cc: Nathan Scott
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    David Howells
     

29 Mar, 2006

2 commits

  • 4b6f5d20b   [PATCH] Make most file operations structs in fs/ const ... Browse Code »

    This is a conversion to make the various file_operations structs in fs/
    const. Basically a regexp job, with a few manual fixups

    The goal is both to increase correctness (harder to accidentally write to
    shared datastructures) and reducing the false sharing of cachelines with
    things that get dirty in .data (while .rodata is nicely read only and thus
    cache clean)

    Signed-off-by: Arjan van de Ven
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Arjan van de Ven
     
  • a28af471b   [PATCH] fs/fat/: proper prototypes for two functions ... Browse Code »

    Add proper prototypes for fat_cache_init() and fat_cache_destroy() in
    msdos_fs.h.

    Signed-off-by: Adrian Bunk
    Acked-by: OGAWA Hirofumi
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Adrian Bunk
     

27 Mar, 2006

1 commit

  • 1d8fa7a2b   [PATCH] remove ->get_blocks() support ... Browse Code »

    Now that get_block() can handle mapping multiple disk blocks, no need to have
    ->get_blocks(). This patch removes fs specific ->get_blocks() added for DIO
    and makes it users use get_block() instead.

    Signed-off-by: Badari Pulavarty
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Badari Pulavarty
     

24 Mar, 2006

2 commits

  • fffb60f93   [PATCH] cpuset memory spread: slab cache format ... Browse Code »

    Rewrap the overly long source code lines resulting from the previous
    patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch
    contains only formatting changes, and no function change.

    Signed-off-by: Paul Jackson
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Paul Jackson
     
  • 4b6a9316f   [PATCH] cpuset memory spread: slab cache filesystems ... Browse Code »

    Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
    memory spreading.

    If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
    in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
    from such a slab cache, the allocations are spread evenly over all the
    memory nodes (task->mems_allowed) allowed to that task, instead of favoring
    allocation on the node local to the current cpu.

    The following inode and similar caches are marked SLAB_MEM_SPREAD:

    file cache
    ==== =====
    fs/adfs/super.c adfs_inode_cache
    fs/affs/super.c affs_inode_cache
    fs/befs/linuxvfs.c befs_inode_cache
    fs/bfs/inode.c bfs_inode_cache
    fs/block_dev.c bdev_cache
    fs/cifs/cifsfs.c cifs_inode_cache
    fs/coda/inode.c coda_inode_cache
    fs/dquot.c dquot
    fs/efs/super.c efs_inode_cache
    fs/ext2/super.c ext2_inode_cache
    fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr
    fs/ext3/super.c ext3_inode_cache
    fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr
    fs/fat/cache.c fat_cache
    fs/fat/inode.c fat_inode_cache
    fs/freevxfs/vxfs_super.c vxfs_inode
    fs/hpfs/super.c hpfs_inode_cache
    fs/isofs/inode.c isofs_inode_cache
    fs/jffs/inode-v23.c jffs_fm
    fs/jffs2/super.c jffs2_i
    fs/jfs/super.c jfs_ip
    fs/minix/inode.c minix_inode_cache
    fs/ncpfs/inode.c ncp_inode_cache
    fs/nfs/direct.c nfs_direct_cache
    fs/nfs/inode.c nfs_inode_cache
    fs/ntfs/super.c ntfs_big_inode_cache_name
    fs/ntfs/super.c ntfs_inode_cache
    fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache
    fs/ocfs2/super.c ocfs2_inode_cache
    fs/proc/inode.c proc_inode_cache
    fs/qnx4/inode.c qnx4_inode_cache
    fs/reiserfs/super.c reiser_inode_cache
    fs/romfs/inode.c romfs_inode_cache
    fs/smbfs/inode.c smb_inode_cache
    fs/sysv/inode.c sysv_inode_cache
    fs/udf/super.c udf_inode_cache
    fs/ufs/super.c ufs_inode_cache
    net/socket.c sock_inode_cache
    net/sunrpc/rpc_pipe.c rpc_inode_cache

    The choice of which slab caches to so mark was quite simple. I marked
    those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
    inode_cache, and buffer_head, which were marked in a previous patch. Even
    though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
    potentially large file system i/o related slab caches as we need for memory
    spreading.

    Given that the rule now becomes "wherever you would have used a
    SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
    the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
    Future file system writers will just copy one of the existing file system
    slab cache setups and tend to get it right without thinking.

    Signed-off-by: Paul Jackson
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Paul Jackson
     

23 Mar, 2006

1 commit

22 Mar, 2006

1 commit

04 Feb, 2006

2 commits

12 Jan, 2006

1 commit

10 Jan, 2006

1 commit

09 Jan, 2006

6 commits

09 Nov, 2005

1 commit

31 Oct, 2005

2 commits

22 Sep, 2005

1 commit

  • 62a36c43c   [PATCH] fat: fix adate ... Browse Code »

    During a forensic analysis on the fat file system, I found than the result for
    the last access date on this file system was different between the stat
    command and the istat command (package tct-utils).

    The istat command display a true date (the right windows date) but the stat
    primitive (so stat, find, ls command) displays a wrong date.

    Signed-off-by: OGAWA Hirofumi
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Stephane Kardas
     

18 Sep, 2005

1 commit

10 Sep, 2005

1 commit

  • fef266580   [PATCH] update filesystems for new delete_inode behavior ... Browse Code »

    Update the file systems in fs/ implementing a delete_inode() callback to
    call truncate_inode_pages(). One implementation note: In developing this
    patch I put the calls to truncate_inode_pages() at the very top of those
    filesystems delete_inode() callbacks in order to retain the previous
    behavior. I'm guessing that some of those could probably be optimized.

    Signed-off-by: Mark Fasheh
    Acked-by: Christoph Hellwig
    Signed-off-by: Hugh Dickins
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Mark Fasheh
     

08 Sep, 2005

1 commit

  • f3ef6f63e   [PATCH] Speedup FAT filesystem directory reads ... Browse Code »

    OGAWA Hirofumi

    This speeds up directory reads for large FAT partitions, if the buffercache
    has to be filled from the drive. Following values were taken from:

    $ time find path_to_freshly_mounted_fat > /dev/null

    on an otherwise idle system.

    FAT with 16KB Clusters on IDE attached drive: Factor 2
    FAT with 32KB Clusters on USB2 attached drive: Factor 10 (!)
    Its less than 1/10 slower, if the buffercache is uptodate.

    The patch introduces the new function fat_dir_readahead().

    fat_dir_readahead() calls sb_breadahead() to readahead a whole cluster,
    if the requested sector is the first one in a cluster.
    It is usefull to do this, because on FAT directories occupy whole
    clusters, with the exception of FAT12/FAT16 root dirs.

    Readahead is only done, if the cluster's first sector is not uptodate
    to avoid overhead, when the buffer cache is already uptodate.
    Note that under memory pressure, the maximal byte count wasted
    (read: has to be red from disk twice) is 1 cluster's size. Thats 64KB.

    fat_dir_readahead() is called from fat__get_entry().

    There is also an unrelated cleanup at one spot:

    if (bh)
    brelse(bh);

    is replaced with:

    brelse(bh);

    brelse() can handle NULL pointer arguments by itself.

    Signed-off-by: Karsten Wiese
    Signed-off-by: OGAWA Hirofumi
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Karsten Wiese
     

01 Jul, 2005

1 commit

30 Jun, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »
    212

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds