28 Nov, 2007
32 commits
-
This was causing us to prematurely push out inline data by one byte.
Signed-off-by: Mark Fasheh
-
The existing bug statement didn't take into account unhashed dentries which
might not have a cluster lock on them. This could happen if a node exporting
the file system via NFS is rebooted, re-exported to nfs clients and then
unmounted. It's fine in this case to not have a dentry cluster lock.Just remove the bug statement and replace it with an error print, which
does the proper checks. Though we want to know if something has happened
which might have prevented a cluster lock from being created, it's
definitely not necessary to panic the machine for this.Signed-off-by: Mark Fasheh
-
Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...Signed-off-by: Jan Kara
Signed-off-by: Mark Fasheh -
If the inode block isn't valid then we don't want to print the value from
that, instead print the block number which was passed in (which should
always be correct). Also, turn this into a debug print for now - folks who
hit an actual problem always have other logs indicating what the source is.Signed-off-by: Mark Fasheh
-
It's almost never worth printing in that situation and we keep forgetting to
manually filter it out.Signed-off-by: Mark Fasheh
-
Signed-off-by: Joe Perches
Signed-off-by: Mark Fasheh -
Right now we're just setting them from the existing parameters, not the
new ones that a remount specified.Signed-off-by: Mark Fasheh
-
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
ide-scsi: use print_hex_dump from
ide: More TSST drives with broken cable detection
ali14xx: constify __initdata
ide: remove bogus ide_fix_driveid() comment
trm290: remove bogus init_hwif_trm290() comment
piix: add HP compaq laptop to short cable list
alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
amd74xx: arm hack
drivers/ide: Add missing "space"
ide-cris: don't override ide_register_hw() result
ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
ide: add CONFIG_IDE_H8300 config option
ide/Kconfig: fix mpc8xx host driver dependencies
macide/q40ide: add missing __init tag to {macide,q40ide}_init()
aec62xx: Fix kernel oops in driver's probe function
ide: skip ide_wait_not_busy() on noprobe-disks
siimage: remove resetproc() method
ide: don't set PIO mode on pre-EIDE drives
sis5513.c: Add Packard Bell EasyNote K5305 to laptops -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: SVM: Fix FPU leak while emulating clts
KVM: SVM: Unload guest fpu on vcpu_put()
KVM: x86 emulator: Use emulator_write_emulated and not emulator_write_std
KVM: x86 emulator: fix the saving of of the eip value
KVM: x86 emulator: fix JMP_REL -
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
scatterlist: add more safeguards
Revert "ll_rw_blk: temporarily enable max_segments tweaking"
mmc: Add missing sg_init_table() call
block: Fix memory leak in alloc_disk_node()
alpha: fix sg_page breakage
blktrace: Make sure BLKTRACETEARDOWN does the full cleanup. -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/iser: Add missing counter increment in iser_data_buf_aligned_len()
IB/ehca: Fix static rate regression
mlx4_core: Fix state check in mlx4_qp_modify()
IB/ipath: Normalize error return codes for posting work requests
IB/ipath: Fix offset returned to ibv_modify_srq()
IB/ipath: Fix error path in QP creation
IB/ipath: Fix offset returned to ibv_resize_cq() -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: adds the context menu key (HUT GenDesc 0x84)
Input: add definitions for frame forward and frame back keys
Input: bf54x-keys - keypad does not exist on BF544 parts
Input: gpio-keys - request and configure GPIOs
Input: i8042 - add i8042.noloop quirk for MS Virtual Machine
Sonypi: use synchronize_irq instead of sycnronize_sched
sonypi: fit input devices into sysfs tree
sony-laptop: fit input devices into sysfs tree -
these utilities implemented in lib/hexdump.c are more handy, please use this.
Bart:
- s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy
- s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/
- don't include ASCII dump
- respect 80-columns limitSigned-off-by: Denis Cheng
Cc: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Bartlomiej Zolnierkiewicz -
Add more TSST (Toshiba/Samsung) drives to the
'broken cable detection' blacklist.Signed-off-by: Peter Missel (peter.missel@onlinehome.de)
Cc: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz -
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Port of Jeff's libata commit 54174db300ee1bac632d62e4ac37fe02e47d1f18
("[libata] ata_piix: add HP compaq laptop to short cable list").Cc: Jeff Garzik
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Port of Alan's patch for pata_ali.c.
Cc: Alan Cox
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Based on the report from snowbat@gmail.com.
Fixes kernel bugzilla bug #9195.
Tested-by: snowbat@gmail.com
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
drivers/ide/pci/amd74xx.c: In function `init_hwif_amd74xx':
drivers/ide/pci/amd74xx.c:387: error: implicit declaration of function `pci_get_legacy_ide_irq'Cc: Russell King
Signed-off-by: Andrew Morton
Signed-off-by: Bartlomiej Zolnierkiewicz -
Signed-off-by: Joe Perches
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Don't override ide_register_hw() result and check if there is a hwif
available to use.* MAX_HWIFS is user configurable nowadays so replace it by hard-coded value.
* Remove the comment about ide_hwifs[].
Acked-by: Mikael Starvik
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Move ETRAX_IDE and friends from arch/cris/arch-{v10,v32}/drivers/Kconfig
to drivers/ide/Kconfig.* Don't force selecting ide-disk and ide-cd device drivers
(please handle this through defconfig if necessary).* Make ETRAX_IDE depend on BROKEN for the time being
(it doesn't even compile currently).Cc: Mikael Starvik
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Add a separate config option for ide-8300 host driver instead of depending
on CONFIG_H8300.This change is a preparation for the future changes and also allows ide-h8300
to be disabled if needed.Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Only LWMON, IVMS8, IVML24 and TQM8xxL platforms have the needed
defines (IDE0_BASE_OFFSET and friends) in the platform header file.Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Add pci_enable_device() to aec62xx probe function
before doing any I/O.Original probe function tries to read from device's
PCI region 4 before calling ide_setup_pci_device().
Since the device is not enabled at this point,
on machines that have no firmware PCI initialization
(e.g. ASUS WL-700gE router), corresponding PCI BAR
is 0 and the following inb() causes a kernel oops.Signed-off-by: Aleksandar Radovanovic
Cc: Linus Torvalds ,
Signed-off-by: Bartlomiej Zolnierkiewicz -
There is a problem in some hardware where the kernel will stall for
35 seconds waiting for disks that don't exist. This patch will skip
waiting for the BSY-bit on IDE drives to go away if you set "hdx=noprobe"
as a kernel option and the disk is not marked as 'present' (like when
you set the geometry by hand).If no noprobe-option is set the code will work (more or less) as the
original but if set the code will skip the ide_wait_not_busy() for
that drive. Even if there would be a drive there and it is still busy
afterwards it should not matter since it isn't probed for later.The code also honors the MAX_DRIVES variable instead of assuming that
there will be two harddrives on the bus.Bart: minor cleanups
Signed-off-by: Jonas Stare
CC: Andrew Morton ,
Cc: Linus Torvalds
Cc: Alan Cox
Cc: Benjamin Herrenschmidt
Signed-off-by: Bartlomiej Zolnierkiewicz -
The intent behind siimage_reset() was probably to hard reset the interface and
the SATA PHY but as the code writes to two reserved bits instead, it obviously
has been ineffective from the start. So, just remove it.Signed-off-by: Sergei Shtylyov
Cc: Alan Cox
Signed-off-by: Bartlomiej Zolnierkiewicz -
Fix handling of the PIO modes for the pre-EIDE drives that did not support
the PIO Flow Control Transfer Mode value (00001 nnn) of the Set Transfer Mode
feature by skipping the actual mode programming.Signed-off-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
With newer kernels HDD in my old laptop is limited to UDMA 33.
With this patch I get UDMA 100 again.Signed-off-by: Gabriel Craciunescu
Signed-off-by: Bartlomiej Zolnierkiewicz
27 Nov, 2007
8 commits
-
The clts code didn't use set_cr0 properly, so our lazy FPU
processing wasn't being done by the clts instruction at all.(this isn't called on Intel as the hardware does the decode for us)
Signed-off-by: Amit Shah
Signed-off-by: Avi Kivity -
Not unloading the guest fpu can cause fpu leaks from guest to guest (or host
to guest).Signed-off-by: Avi Kivity
-
emulator_write_std() is not implemented, and calling write_emulated should
work just as well in place of write_std.Fixes emulator failures with the push r/m instruction.
Signed-off-by: Amit Shah
Signed-off-by: Avi Kivity -
this make sure that no matter what is the operand size,
all the value of the eip will be savedSigned-off-by: Izik Eidus
Signed-off-by: Avi Kivity -
Change JMP_REL to call to register_address_increment(): the operands size
should not effect the calculation of the eip, instead the ad_bytes should
affect it.Signed-off-by: Izik Eidus
Signed-off-by: Avi Kivity -
Add more safeguards to protect against misinterpreting a chain entry
as a normal scatterlist and vice-versa.* Make sure the entry isn't a chain when assigning and reading a
normal sg.* Clear offset and length when chaining.
Signed-off-by: Tejun Heo
Signed-off-by: Jens Axboe -
This was a temporary debugging thing for sg chaining testing, revert
it now as it has served its purpose.This reverts commit 563063a808de6b2004d5b8a09ddcb6125481f4b2.
Signed-off-by: Jens Axboe
-
mmc_init_queue only initializes the scatterlists with sg_init_table()
when using a bounce buffer. This leads to a BUG() when CONFIG_DEBUG_SG
is set.Signed-off-by: Haavard Skinnemoen
Signed-off-by: Jens Axboe
