15 Dec, 2014
2 commits
-
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver update for 3.19-rc1Lots of little things all over the place in different drivers, and a
new subsystem, "coresight" has been added. Full details are in the
shortlog"* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
parport: parport_pc, do not remove parent devices early
spmi: Remove shutdown/suspend/resume kernel-doc
carma-fpga-program: drop videobuf dependency
carma-fpga: drop videobuf dependency
carma-fpga-program.c: fix compile errors
i8k: Fix temperature bug handling in i8k_get_temp()
cxl: Name interrupts in /proc/interrupt
CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
coresight-replicator: remove .owner field for driver
coresight: fixed comments in coresight.h
coresight: fix typo in comment in coresight-priv.h
coresight: bindings for coresight drivers
coresight: Adding ABI documentation
w1: support auto-load of w1_bq27000 module.
w1: avoid potential u16 overflow
cn: verify msg->len before making callback
mei: export fw status registers through sysfs
mei: read and print all six FW status registers
mei: txe: add cherrytrail device id
mei: kill cached host and me csr values
... -
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev__once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
27 Nov, 2014
2 commits
-
1/ change request_module call to zero-pad single digit
family numbers. This appears to be the intention of
the code, but not what it actually does.This means that the alias created for W1_FAMILY_SMEM_01
might actually be useful.2/ Define a family name for the BQ27000 battery charge monitor.
Unfortunately this is the same number as W1_FAMILY_SMEM_01
so if both a compiled on a system, one module might need to
be blacklisted.3/ Add a MODULE_ALIAS for the bq27000.
Acked-by: Evgeniy Polyakov
Signed-off-by: NeilBrown
Signed-off-by: Greg Kroah-Hartman -
Reported-by: Dan Carpenter
Acked-by: Evgeniy Polyakov
Signed-off-by: David Fries
Signed-off-by: Greg Kroah-Hartman
11 Nov, 2014
1 commit
-
This driver has no 'compatible' string and so is not found when
using device-tree.Add one with value to match
hdqw1w: 1w@480b2000 {
device in omap3.dtsi.Signed-off-by: NeilBrown
Acked-by: Evgeniy Polyakov
Signed-off-by: Tony Lindgren
08 Nov, 2014
1 commit
-
Adjust the bulk message timeout to the other ones (1000ms). Otherwise the
following dmesg errors can be seen on a Raspberry Pi:
[ 31.492386] Failed to read 1-wire data from 0x81: err=-110.
[ 31.504168] 0x81: count=-110, status:
[ 31.613404] Failed to read 1-wire data from 0x81: err=-110.
[ 31.621915] 0x81: count=-110, status:
[ 43.260968] Failed to read 1-wire data from 0x81: err=-110.
[ 43.270998] 0x81: count=-110, status:
[ 43.379959] Failed to read 1-wire data from 0x81: err=-110.
[ 43.388854] 0x81: count=-110, status:Signed-off-by: Alexander Stein
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman
20 Oct, 2014
1 commit
-
A platform_driver does not need to set an owner, it will be populated by the
driver core.Signed-off-by: Wolfram Sang
24 Jun, 2014
1 commit
-
commit 94859308a21b "w1: new w1_ds2406 driver" added a new driver
that uses the crc16 library, but didn't ensure that the core is
there. This adds the necessary Kconfig statements, just like we
have it for other w1 drivers.Reported-by: kbuild test robot
Signed-off-by: Arnd Bergmann
Acked-by: Scott Alfter
Cc: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman
20 Jun, 2014
9 commits
-
This patch replaces all calls to the "printk" function within the "masters"
subdirectory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...Signed-off-by: Fjodor Schelichow
Signed-off-by: Roman Sommer
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
This patch replaces all calls to the "printk" function within the main "w1"
directory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...Signed-off-by: Fjodor Schelichow
Signed-off-by: Roman Sommer
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
This patch replaces all calls to the "printk" function within the "slaves"
subdirectory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...Signed-off-by: Fjodor Schelichow
Signed-off-by: Roman Sommer
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Some preliminary work at making use of this driver led me to implement
CRC-16 checks on read and write to deal with the occasional glitchiness of
the 1-Wire bus. The revised driver (attached) returns an I/O error if the
CRC check fails. When reading the chip's state, either you get a valid
indication or you get an I/O error. When changing its state, either the
change is successful or an I/O error is returned.Signed-off-by: Scott Alfter
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Replace spaces at beginning of the string with tabs, and replace foo * bar with foo *bar in a pointer declaration.
Signed-off-by: Thomas Wood
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
According to the i.MX reference manual, the read/write bit operations
takes from 60 us to 120 us.
This patch optimizes mxc_w1_ds2_touch_bit() function to use proper
value for such delay. Nevertheless, a small margin for the timeout has
been added for the case if clock frequency is inaccurate.Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman -
This patch adds a software reset for 1-Wire module at driver startup.
Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman -
According to the i.MX reference manual, the reset procedure and
"presence" pulse takes 511 and 512 us, respectively. Measurement for
i.MX27 is about 1100 us. There is no need to wait Reset+Presence
more than this time.
This patch optimizes mxc_w1_ds2_reset_bus() function to use proper
value for delay after w1 bus reset. Nevertheless, a small margin for
the timeout has been added for the case if clock frequency is inaccurate.Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman -
W1 reset_bus() should return zero if slave device is present.
This patch fix this issue.Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman
04 Jun, 2014
1 commit
-
…el/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle were:- reduced/streamlined smp_mb__*() interface that allows more usecases
and makes the existing ones less buggy, especially in rarer
architectures- add rwsem implementation comments
- bump up lockdep limits"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
rwsem: Add comments to explain the meaning of the rwsem's count field
lockdep: Increase static allocations
arch: Mass conversion of smp_mb__*()
arch,doc: Convert smp_mb__*()
arch,xtensa: Convert smp_mb__*()
arch,x86: Convert smp_mb__*()
arch,tile: Convert smp_mb__*()
arch,sparc: Convert smp_mb__*()
arch,sh: Convert smp_mb__*()
arch,score: Convert smp_mb__*()
arch,s390: Convert smp_mb__*()
arch,powerpc: Convert smp_mb__*()
arch,parisc: Convert smp_mb__*()
arch,openrisc: Convert smp_mb__*()
arch,mn10300: Convert smp_mb__*()
arch,mips: Convert smp_mb__*()
arch,metag: Convert smp_mb__*()
arch,m68k: Convert smp_mb__*()
arch,m32r: Convert smp_mb__*()
arch,ia64: Convert smp_mb__*()
...
28 May, 2014
2 commits
-
w1_process_callbacks() expects to be called with dev->list_mutex held,
but it is the fact only in w1_process(). __w1_remove_master_device()
calls w1_process_callbacks() after it releases list_mutex.The patch fixes __w1_remove_master_device() to acquire list_mutex
for w1_process_callbacks().Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov
Acked-by: David Fries
Acked-by: Evgeniy Polyakov
Cc: stable # 3.15
Signed-off-by: Greg Kroah-Hartman -
Applications can submit a set of commands in one packet to the kernel,
and in some cases it is required such as reading the temperature
sensor results. This adds an option W1_CN_BUNDLE to the flags of
cn_msg to request the kernel to reply in one packet for efficiency.The cn_msg flags now check for unknown flag values and return an error
if one is seen. See "Proper handling of unknown flags in system
calls" http://lwn.net/Articles/588444/This corrects the ack values returned as per the protocol standard,
namely the original ack for status messages and seq + 1 for all others
such as the data returned from a read.Some of the common variable names have been standardized as follows.
struct cn_msg *cn
struct w1_netlink_msg *msg
struct w1_netlink_cmd *cmd
struct w1_master *devWhen an argument and a function scope variable would collide, add req_
to the argument.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman
18 Apr, 2014
1 commit
-
Mostly scripted conversion of the smp_mb__* barriers.
Signed-off-by: Peter Zijlstra
Acked-by: Paul E. McKenney
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar
17 Apr, 2014
2 commits
-
__w1_attach_slave_device calls device_add which calls w1_bus_notify
which calls the w1_bq27000 slave driver, which calls
platform_device_add and device_add and deadlocks on getting
&(&priv->bus_notifier)->rwsem as it is still held in the previous
device_add. This avoids the problem by processing the family
add/remove outside of the slave device_add call.Commit 47eba33a0997fc7362a introduced this deadlock and added
a KOBJ_ADD, as the add was already reported in device_register two add
events were being sent. This change suppresses the device_register
add so that any slave device sysfs entries are setup before the add
goes out.Belisko Marek reported this change fixed the deadlock he was seeing on
ARM device tree, while testing on my x86-64 system never saw the
deadlock.Reported-by: Belisko Marek
Signed-off-by: David Fries
Signed-off-by: Greg Kroah-Hartman -
If the message type is W1_MASTER_CMD or W1_SLAVE_CMD, then a reference
is taken when searching for the slave or master device. If there
isn't any following data m->len (mlen is a copy) is 0 and packing up
the message for later execution is skipped leaving nothing to
decrement the reference counts.Way back when, m->len was checked before the search that increments the
reference count, but W1_LIST_MASTERS has no additional data, the check
was moved in 9be62e0b2fadaf5ff causing this bug.This change reorders to put the check before the reference count is
incremented avoiding the problem.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman
01 Mar, 2014
4 commits
-
This helps increasing build testing coverage.
To do this, __raw_{read,write}b() functions was be replaced with
simple {read,write}b() variants.Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman -
- Remove old and currently wrong address of the FSF from license
parts of the code.
- Remove unused #include and sort remaining headers alphabetically.
- Remove unised definitions.
- Add definitions for bit-fields.
- Add missing module owner field.Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman -
This patch fix mxc_w1_ds2_reset_bus() return value.
According to i.MX reference manual, "presence status" reflected
in the bit 6 of control register.Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman -
Configuration for masters and slaves is included only if W1 symbol
enabled, so no reason to check it once more.Signed-off-by: Alexander Shiyan
Signed-off-by: Greg Kroah-Hartman
16 Feb, 2014
2 commits
-
of_get_gpio() might return -EPROBE_DEFER meaning that the driver
providing the gpio isn't ready yet. If that happens for the first gpio
the resulting kernel output without this patch is:w1-gpio somename: Failed to parse DT
platform somename: Driver w1-gpio requests probe deferralThe first message is misleading and so is suppressed with this patch.
Further if determining the gpio to switch the external pullup yields
-EPROBE_DEFER this error should be passed back to the caller instead of
just continuing without pullup.Signed-off-by: Uwe Kleine-König
Signed-off-by: Greg Kroah-Hartman -
On 64 bit systems, a large value for "long tmp" is truncated when
assigning to "int md->max_slave_count" so we still end up with a value
less than one despite the "tmp < 1" check.This is more of a problem for static checkers than a real life issue,
but it's simple enough to fix.Acked-by: David Fries
Signed-off-by: Dan Carpenter
Signed-off-by: Greg Kroah-Hartman
09 Feb, 2014
1 commit
-
This reverts ds1wm.c from commit d3a8a9dbb903c73a7ec2deae4c9b7d74b6834f4c.
Of the three files changed ds1wm.c ds2490.c and w1_netlink.c, it turns out
ds1wm.c was locking bus_mutex, but inside the loop and I missed it.
Reverting ds1wm.c to the previous version.Reported-by: Dan Carpenter
Signed-off-by: David Fries
Signed-off-by: Greg Kroah-Hartman
08 Feb, 2014
10 commits
-
The bus_mutex needs to be taken to serialize access to a specific bus.
netlink wasn't updated when bus_mutex was added and was calling
without that lock held, and not all of the masters were holding the
bus_mutex in a search. This was causing the ds2490 hardware to stop
responding when both netlink and /sys slaves were executing bus
commands at the same time.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Switch the code documentation format style to DocBook format, enable
DocBook documentation generation, and fix some comments.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
The first line printed from w1_slave gives the context of the w1
device. So does the second line, but if the CRC check failed, the
second line contains the last successful result. It is confusing when
it prints the temperature next to the line that might be a previous
conversion and has nothing to do with that printed temperature value.
Modify the code to store the last good conversion in family_data,
which is designed for custom data structures.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
The hardware search was failing without the COMM_RST flag. Enabled
the flag and rewrote the function to handle more than one buffer of
results and to continuing where the search left off. Remove hardware
search note from the limitations now that it works. The "w1: ds2490
USB setup fixes" change went from 23.16 seconds to about 3 seconds,
this takes the time for the search down to .307346 seconds.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Calling usb_reset_configuration after usb_set_interface resets the
interface that was just selected, so call reset first.
Using alternative 3 greatly speeds the one wire search.
alt 0 or 1, 10ms int, 23.16 seconds
alt 2 or 3, 1ms int, 2.99 to 3.05 secondsUse usb_interrupt_msg not usb_bulk_msg as it is an interrupt pipe
(bulk worked, it was just technically the wrong call).Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Use a #define for the usb vendor request type, clear the status
byte and use that instead of a magic offset in checking if idle.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Unicast one wire replies back to the sender portid to avoid multiple
programs getting each other's messages, especially as the response
can't be uniquely identified with the sequence coming from the
requesting program when both programs generate the same id. Continue
to broadcast events such as add/remove master/slave devices.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
This allows replying only to the requestor portid while still
supporting broadcasting. Pass 0 to portid for the previous behavior.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Netlink is a socket interface and is expected to be asynchronous.
Clients can now make w1 requests without blocking by making use of the
w1_master thread to process netlink commands which was previously only
used for doing an automatic bus search.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman -
Introduce new commands to add, remove, and list slave devices through
the netlink interface. This can be useful to skip the search on a
static network. They could previously only be added or removed
through automatic search or sysfs, and this allows a program to only
use netlink.Only allocate memory when needed, so move kzalloc into w1_get_slaves
where it was used.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman