20 Jul, 2007
40 commits
-
Slab destructors were no longer supported after Christoph's
c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been
BUGs for both slab and slub, and slob never supported them
either.This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).Signed-off-by: Paul Mundt
-
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits)
ide: add support for SCSI ioctls to ide-floppy
ide: remove stale changelog from setup-pci.c
ide: remove stale changelog/comments/TODO from ide.c
ide-cris: handle PIO auto-tuning in tune_cris_ide()
ide: add PIO masks
ide: remove ide_find_best_pio_mode()
ide: drop "PIO data" argument from ide_get_best_pio_mode()
ide: ide_find_best_pio_mode() fixes (take 2)
ide: add ide_pio_cycle_time() helper (take 2)
sc1200: remove stale Power Management code
ide: ide_start_power_step() fix WRT disabling DMA
serverworks: fix DMA
serverworks: always tune PIO
ide: add ide_pci_device_t.host_flags (take 2)
ide: add ide_dev_has_iordy() helper (take 4)
ide: make ide_get_best_pio_mode() print info if overriding PIO mode
siimage: PIO mode setup fixes (take 2)
atiixp: PIO mode setup fixes
ide: Stop mapping ROMs
IDE: Remove references to dead ETRAX-related variables.
... -
a) switch by loff_t == __cmpdi2 use. Replaced with a couple
of obvious ifs; update of ->f_pos in the first one makes sure that we
do the right thing in all cases.
b) block_signals() and unblock_signals() are globals on UML.
Renamed coda ones; in principle UML probably ought to do rename as
well, but that's another story.Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds -
Removal of rtt argument in ->cong_avoid() had missed tcp_htcp.c
instance.Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds -
Now that ide-floppy supports SG_IO we can add support for SCSI ioctls
(except deprecated SCSI_IOCTL_SEND_COMMAND and legacy CDROM_SEND_PACKET
ones - we can add them later iff really needed).While at it remove handling of CDROMEJECT and CDROMCLOSETRAY ioctls from
generic_ide_ioctl():- This prevents ide-{disk,tape,scsi} device drivers from obtaining
REQ_TYPE_BLOCK_PC type requests which are currently unsupported by
these drivers and which are potentially harmful (as reported by Andrew).- There is no functionality loss since aforementioned ioctls will now be
handled by idefloppy_ioctl()->scsi_cmd_ioctl() (for devices using
ide-floppy driver) and by idecd_ioctl->cdrom_ioctl()->scsi_cmd_ioctl()
(for devices using ide-cd driver).Cc: Jens Axboe
Cc: FUJITA Tomonori
Cc: James Bottomley
Cc: Jeff Garzik
Cc: Andrew Morton
Signed-off-by: Bartlomiej Zolnierkiewicz -
Signed-off-by: Bartlomiej Zolnierkiewicz
-
Signed-off-by: Bartlomiej Zolnierkiewicz
-
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Add ATA_PIO[0-6] defines to .
* Add ->pio_mask field to ide_pci_device_t and ide_hwif_t.
* Add PIO masks to host drivers.
change ACK-ed by Jeff Garzik .
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Add ->host_flags to ide_hwif_t to store ide_pci_device_t.host_flags,
assign it in setup-pci.c:ide_pci_setup_ports().* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags
and teach ide_get_best_pio_mode() about them. Also remove needless
!drive->id check while at it (drive->id is always present).* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()
and then remove no longer needed ide_find_best_pio_mode().There should be no functionality changes caused by this patch.
Acked-by: Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode()
and convert all users accordingly.* Remove no longer needed ide_pio_data_t.
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Check IORDY bit for PIO modes > 2.
* Some devices claim maximum PIO mode > 2 in id->tPIO, they were punished too
severly for this by being limited to PIO_SLOW. Limit them to PIO2 instead.v2:
* Fix PIO number being returned incorrectly instead of PIO mode
(Noticed by Sergei).Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Add ide_pio_cycle_time() helper.
* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers
(previously cycle time given by the device was only used for "pio" == 255).* Remove no longer needed ide_pio_data_t.cycle_time field.
v2:
* Fix "ata_" prefix (Noticed by Jeff).Acked-by: Sergei Shtylyov
Cc: Jeff Garzik
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Nowadays core IDE code handles restoring of PIO and DMA modes
(ide-io.c:ide_start_power_step() etc) so remove open-coded version
from sc1200_resume().There should be no change in behavior because settings done by
sc1200_resume() were always overridden by generic_ide_resume()
and ide_{start,stop}_power_step().* Bump driver version.
Cc: Mark Lord
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Do the same thing as probe_hwif() and always disable DMA so chipset DMA
enabled bit gets cleared (if the drive doesn't support DMA ide_set_dma()
won't try to tune it anyway).* Add TODO comment about respecting ->using_dma setting.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
The driver used to depend on BIOS settings for deciding whether it is OK
to use DMA. However it seems that BIOS doesn't always handle all cases
correctly so just let IDE core to decide about this. It should be a safe
thing to do now, after the driver went through heavy bugfixing.Thanks for bugreport and testing the patch goes out to Sven Niedner.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Always set ->autotune so PIO gets correctly auto-tuned (previously
->autotune was only set when ->dma_base wasn't available, however
->ide_dma_check()/->speedproc() was always trying to tune PIO when
tuning DMA).* Move code responsible for programming chipset for PIO mode from
svwks_tune_chipset() to svwks_tune_pio(). Don't tune PIO when tuning
DMA (this is no longer needed since ->autotune is always set now).* Handle PIO modes early in svwks_tune_chipset() so DMA configuration
registers don't get cleared when programming PIO mode.* Bump driver version.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
* Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags
and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS.* Add IDE_HFLAG_SINGLE flag for single channel devices.
* Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE
and remove no longer needed ide_pci_device_t.channels field.v2:
* Fix issues noticed by Sergei:
- correct code alignment in scc_pata.c
- s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.cAcked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Add ide_dev_has_iordy() helper and use it sl82c105 host driver.
* Remove no longer needed ide_pio_data_t.use_iordy field.
v2/v3:
* Fix issues noticed by Sergei:
- correct patch description
- fix comment in ide_get_best_pio_mode()v4:
* Fix "ata_" prefix (Noticed by Jeff).Acked-by: Sergei Shtylyov
Cc: Jeff Garzik
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Print info about overriding PIO mode in ide_get_best_pio_mode().
* Remove info about overriding PIO mode from cmd64{0,x} host drivers.
* Remove no longer needed ide_pio_data_t.overridden field.
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Add sil_tuneproc() wrapper for siimage_tuneproc() which also sets
PIO mode on the device.* Add missing ide_get_best_pio_mode() call to sil_tuneproc() so
"pio" == 255 (autotune) is handled correctly (previously PIO0 was used)
and "pio" values > 4 && < 255 are filtered to PIO4 (instead of PIO0).* Add code limiting maximum PIO mode according to the pair device capabilities
to sil_tuneproc().* Convert users of config_siimage_chipset_for_pio() to use sil_tune_pio() and
sil_tuneproc(). This fixes PIO fallback in siimage_config_drive_for_dma() to
use max PIO mode available instead of PIO4 (config_siimage_chipset_for_pio()
used wrong arguments for ide_get_best_pio_mode() and as a results always
tried to set PIO4).* Remove no longer needed siimage_taskfile_timing()
and config_siimage_chipset_for_pio().* Enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
from siimage_speedproc()* Bump driver version.
v2:
* Fix issues noticed by Sergei:
- correct pair device check
- trim only taskfile PIO to the slowest of the master/slave
- enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
from siimage_speedproc()
- add TODO item for IORDY bugs
- minor cleanupsReviewed-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* Split off exisiting atiixp_tuneproc() into atiixp_tune_pio()
and then add setting device PIO mode to atiixp_tuneproc().* Add missing ide_get_best_pio_mode() call to atiixp_tuneproc() so
"pio" == 255 (autotune) is handled correctly and "pio" values > 4 && < 255
are filtered to PIO4 (previously "pio" == 5 could result in wrong timings
being used and "pio" values > 4 && < 255 in an OOPS).* Handle PIO modes early in atiixp_speedproc() so save_mdma_mode[]
doesn't get cleared.* In atiixp_dma_check():
- fix max_mode argument for ide_get_best_pio_mode()
- don't call atiixp_dma_2_pio() so PIO1 doesn't get remapped to PIO0
- use atiixp_tuneproc() instead of atiixp_speedproc()* Bump driver version.
Signed-off-by: Bartlomiej Zolnierkiewicz
-
Various old IDE drivers go mapping ROM devices for no apparent reason and
without using the ROM mapping API we now have. They don't actually use
the ROM they map and the new libata drivers are happy without it being
mapped so rather than port them lets just junk it for the next -rc1.Signed-off-by: Alan Cox
Acked-by: Sergei Shtylyov
Cc: Andrew Morton
Signed-off-by: Bartlomiej Zolnierkiewicz -
The two CONFIG variables
CONFIG_ETRAX_IDE_CSE1_16_RESET
CONFIG_ETRAX_IDE_CSP0_8_RESETappear to have been dead since way back in 2.5.xx days:
http://www.linuxhq.com/kernel/v2.5/75/arch/cris/drivers/Kconfig
Signed-off-by: Robert P. J. Day
Cc: Michael Starvik
Signed-off-by: Bartlomiej Zolnierkiewicz -
One card submitted by user.
Signed-off-by: Marcin Juszkiewicz
Cc: Jeff Garzik
Signed-off-by: Bartlomiej Zolnierkiewicz -
Workaround for errata A308: turn down the UDMA mode and retry
the DMA command when the data lost condition is detected.take2:
udma_filter() hook is used to limit ATAPI UDMA mode.Signed-off-by: Kou Ishizaki
Signed-off-by: Akira Iguchi
Cc: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
Move to using inline function variant of eieio instead of inline assmebly.
Signed-off-by: Kumar Gala
Cc: kou.ishizaki@toshiba.co.jp
Acked-by: Sergei Shtylyov
Signed-off-by: Bartlomiej Zolnierkiewicz -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
SELinux: use SECINITSID_NETMSG instead of SECINITSID_UNLABELED for NetLabel
SELinux: enable dynamic activation/deactivation of NetLabel/SELinux enforcement -
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
[XFS] Fix inode size update before data write in xfs_setattr
[XFS] Allow punching holes to free space when at ENOSPC
[XFS] Implement ->page_mkwrite in XFS.
[FS] Implement block_page_mkwrite.Manually fix up conflict with Nick's VM fault handling patches in
fs/xfs/linux-2.6/xfs_file.cSigned-off-by: Linus Torvalds
-
Currently, CONFIG_X86_CMPXCHG64 both enables boot-time checking of
the cmpxchg64b feature and enables compilation of the set_64bit() family.
Since the option is dependent on PAE, and since KVM depends on set_64bit(),
this effectively disables KVM on i386 nopae.Simplify by removing the config option altogether: the boot check is made
dependent on CONFIG_X86_PAE directly, and the set_64bit() family is exposed
without constraints. It is up to users to check for the feature flag (KVM
does not as virtualiation extensions imply its existence).Signed-off-by: Avi Kivity
Signed-off-by: Linus Torvalds -
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
NFSv4: handle lack of clientaddr in option string
NFSv4: debug print ntohl(status) in nfs client callback xdr code
SUNRPC: Clean up the sillyrename code
NFS: Introduce struct nfs_removeargs+nfs_removeres
NFS: Use dentry->d_time to store the parent directory verifier.
SUNRPC: move bkl locking and xdr proc invocation into a common helper
NFSv4: Fix the nfsv4 readlink reply buffer alignment
NFSv4: Fix the readdir reply buffer alignment
NFSv4: More NFSv4 xdr cleanups
NFSv4: Try to recover from getfh failures in nfs4_xdr_dec_open
NFSv4: 'constify' lookup arguments.
NFSv4: Don't fail nfs4_xdr_dec_open if decode_restorefh() failed
NFSv4: Fix open state recovery
NFSD/SUNRPC: Fix the automatic selection of RPCSEC_GSS -
With the new setup code, we generate a couple more files
Signed-off-by: Matthew Wilcox
[ .. and do the same for x86-64 - Alexey ]
Acked-by: Alexey Dobriyan
Acked-by: H. Peter Anvin
Signed-off-by: Linus Torvalds -
83c54070ee1a2d05c89793884bea1a03f2851ed4 broke spufs by incorrectly
updating the code, this patch gets it to compile again.It's probably still broken due to the scheduler changes, but this
at least makes sure cell kernels can still be built.Signed-off-by: Christoph Hellwig
Cc: Arnd Bergmann
Acked-by: Geoff Levand
Cc: Paul Mackerras
Cc: Nick Piggin
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits)
xtensa: use DATA_DATA in xtensa
powerpc: add missing DATA_DATA to powerpc
cris: use DATA_DATA in cris
kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c
kbuild: use -fno-optimize-sibling-calls unconditionally
kconfig: reset generated values only if Kconfig and .config agree.
kbuild: fix the warning when running make tags
kconfig: strip 'CONFIG_' automatically in kernel configuration search
kbuild: use POSIX BRE in headers install target
Whitelist references from __dbe_table to .init
modpost white list pattern adjustment
kbuild: do section mismatch check on full vmlinux
kbuild: whitelist references from variables named _timer to .init.text
kbuild: remove hardcoded _logo names from modpost
kbuild: remove hardcoded apic_es7000 from modpost
kbuild: warn about references from .init.text to .exit.text
kbuild: consolidate section checks
kbuild: refactor code in modpost to improve maintainability
kbuild: ignore section mismatch warnings originating from .note section
kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it
... -
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)
i2c: Delete the i2c-isa pseudo bus driver
hwmon: refuse to load abituguru driver on non-Abit boards
hwmon: fix Abit Uguru3 driver detection on some motherboards
hwmon/w83627ehf: Be quiet when no chip is found
hwmon/w83627ehf: No need to initialize fan_min
hwmon/w83627ehf: Export the thermal sensor types
hwmon/w83627ehf: Enable VBAT monitoring
hwmon/w83627ehf: Add support for the VID inputs
hwmon/w83627ehf: Fix timing issues
hwmon/w83627ehf: Add error messages for two error cases
hwmon/w83627ehf: Convert to a platform driver
hwmon/w83627ehf: Update the Kconfig entry
make coretemp_device_remove() static
hwmon: Add LM93 support
hwmon: Improve the pwmN_enable documentation
hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
hwmon: Add support for newer uGuru's
hwmon/f71805f: Add temperature-tracking fan control mode
hwmon/w83627ehf: Preserve speed reading when changing fan min
hwmon: fix detection of abituguru volt inputs
...Manual fixup of trivial conflict in MAINTAINERS file
-
If root raised the default wakeup threshold over the size of the
output pool, the pool transfer function could overflow the stack with
RNG bytes, causing a DoS or potential privilege escalation.(Bug reported by the PaX Team )
Cc: Theodore Tso
Cc: Willy Tarreau
Signed-off-by: Matt Mackall
Signed-off-by: Chris Wright
Signed-off-by: Linus Torvalds -
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: ->fallocate() support -
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
[PATCH] sched: implement cpu_clock(cpu) high-speed time source
[PATCH] sched: fix the all pinned logic in load_balance_newidle()
[PATCH] sched: fix newly idle load balance in case of SMT
[PATCH] sched: sched_cacheflush is now unused -
When a CONFIG_USER_NS=n and a user tries to unshare some namespace other
than the user namespace, the dummy copy_user_ns returns NULL rather than
the old_ns.This value then gets assigned to task->nsproxy->user_ns, so that a
subsequent setuid, which uses task->nsproxy->user_ns, causes a NULL
pointer deref.Fix this by returning old_ns.
Signed-off-by: Serge E. Hallyn
Signed-off-by: Linus Torvalds -
The slab and slob allocators already did this right, but slub would call
"get_object_page()" on the magic ZERO_SIZE_PTR, with all kinds of nasty
end results.Noted by Ingo Molnar.
Cc: Ingo Molnar
Cc: Christoph Lameter
Cc: Andrew Morton
Signed-off-by: Linus Torvalds
