Eric Lee / smarc-ti-linux-kernel

03 Apr, 2014

1 commit

  • cd6362bef   Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next ... Browse Code »

    Pull networking updates from David Miller:
    "Here is my initial pull request for the networking subsystem during
    this merge window:

    1) Support for ESN in AH (RFC 4302) from Fan Du.

    2) Add full kernel doc for ethtool command structures, from Ben
    Hutchings.

    3) Add BCM7xxx PHY driver, from Florian Fainelli.

    4) Export computed TCP rate information in netlink socket dumps, from
    Eric Dumazet.

    5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
    Dichtel.

    6) Convert many drivers to pci_enable_msix_range(), from Alexander
    Gordeev.

    7) Record SKB timestamps more efficiently, from Eric Dumazet.

    8) Switch to microsecond resolution for TCP round trip times, also
    from Eric Dumazet.

    9) Clean up and fix 6lowpan fragmentation handling by making use of
    the existing inet_frag api for it's implementation.

    10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

    11) Auto size SKB lengths when composing netlink messages based upon
    past message sizes used, from Eric Dumazet.

    12) qdisc dumps can take a long time, add a cond_resched(), From Eric
    Dumazet.

    13) Sanitize netpoll core and drivers wrt. SKB handling semantics.
    Get rid of never-used-in-tree netpoll RX handling. From Eric W
    Biederman.

    14) Support inter-address-family and namespace changing in VTI tunnel
    driver(s). From Steffen Klassert.

    15) Add Altera TSE driver, from Vince Bridgers.

    16) Optimizing csum_replace2() so that it doesn't adjust the checksum
    by checksumming the entire header, from Eric Dumazet.

    17) Expand BPF internal implementation for faster interpreting, more
    direct translations into JIT'd code, and much cleaner uses of BPF
    filtering in non-socket ocntexts. From Daniel Borkmann and Alexei
    Starovoitov"

    * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
    netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
    net: Add a test to see if a skb is freeable in irq context
    qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
    net: ptp: move PTP classifier in its own file
    net: sxgbe: make "core_ops" static
    net: sxgbe: fix logical vs bitwise operation
    net: sxgbe: sxgbe_mdio_register() frees the bus
    Call efx_set_channels() before efx->type->dimension_resources()
    xen-netback: disable rogue vif in kthread context
    net/mlx4: Set proper build dependancy with vxlan
    be2net: fix build dependency on VxLAN
    mac802154: make csma/cca parameters per-wpan
    mac802154: allow only one WPAN to be up at any given time
    net: filter: minor: fix kdoc in __sk_run_filter
    netlink: don't compare the nul-termination in nla_strcmp
    can: c_can: Avoid led toggling for every packet.
    can: c_can: Simplify TX interrupt cleanup
    can: c_can: Store dlc private
    can: c_can: Reduce register access
    can: c_can: Make the code readable
    ...

    Linus Torvalds
     

24 Mar, 2014

1 commit

21 Mar, 2014

1 commit

  • d986b4a64   Bluetooth: btmrvl: don't consume all vendor specific events ... Browse Code »

    If vendor specific HCI commands are received from application,
    we should send corresponding events to stack.
    These events should be consumed in driver, only if they are for
    the internal HCI commands generated by driver.

    This patch fixes the vendor command 0x3f stuck problem with
    above mentioned change. For example,

    hcitool cmd 3f 22 fe 06 22 21 20 43 50 00

    Signed-off-by: Amitkumar Karwar
    Signed-off-by: Bing Zhao
    Signed-off-by: Marcel Holtmann

    Amitkumar Karwar
     

10 Mar, 2014

1 commit

08 Mar, 2014

1 commit

06 Mar, 2014

2 commits

  • ca58e594d   Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012. ... Browse Code »
    13

    usb devices info:

    T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 13 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0cf3 ProdID=e005 Rev= 0.02
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
    E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
    E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
    E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
    E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
    E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
    E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

    Signed-off-by: Peng Chen
    Signed-off-by: Johan Hedberg

    Peng Chen
     
  • a08b15e66   Bluetooth: Remove assignments in if-statements ... Browse Code »

    Remove assignment in if-statements to be consistent with the coding
    style.

    Signed-off-by: Valentin Ilie
    Signed-off-by: Johan Hedberg

    Valentin Ilie
     

04 Mar, 2014

1 commit

  • c327cddd1   Bluetooth: Stop BCSP/H5 timer before cleaning up ... Browse Code »

    When stopping BCSP/H5, stop the retransmission timer before proceeding
    to clean up packet queues. The previous code had a race condition where
    the timer could trigger after the packet lists and protocol structure
    had been removed which led to dereferencing NULL or use-after-free bugs.

    Signed-off-by: Michael Knudsen
    Reported-by: Kirill Tkhai
    Signed-off-by: Johan Hedberg

    Michael Knudsen
     

19 Feb, 2014

3 commits

  • a735f9e22   Bluetooth: append new supported device to the list [0b05:17d0] ... Browse Code »
    2

    The device found on Asus Z87 Expert motherboard requires firmware to work
    correctly.

    T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0b05 ProdID=17d0 Rev=00.02
    C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

    Signed-off-by: Andy Shevchenko
    Signed-off-by: Marcel Holtmann

    Andy Shevchenko
     
  • 0b8800623   Bluetooth: sort the list of IDs in the source code ... Browse Code »
    2

    This will help to manage table of supported IDs.

    There is no functional change.

    Signed-off-by: Andy Shevchenko
    Signed-off-by: Marcel Holtmann

    Andy Shevchenko
     
  • b075dd40c   Bluetooth: allocate static minor for vhci ... Browse Code »

    Commit bfacbb9 (Bluetooth: Use devname:vhci module alias for virtual HCI
    driver) added the module alias to hci_vhci module so it's possible to
    create the /dev/vhci node. However creating an alias without
    specifying the minor doesn't allow us to create the node ahead,
    triggerring module auto-load when it's first accessed.

    Starting with depmod from kmod 16 we started to warn if there's a
    devname alias without specifying the major and minor.

    Let's do the same done for uhid, kvm, fuse and others, specifying a
    fixed minor. In systems with systemd as the init the following will
    happen: on early boot systemd will call "kmod static-nodes" to read
    /lib/modules/$(uname -r)/modules.devname and then create the nodes. When
    first accessed these "dead" nodes will trigger the module loading.

    Signed-off-by: Lucas De Marchi
    Acked-by: Greg Kroah-Hartman
    Signed-off-by: Marcel Holtmann

    Lucas De Marchi
     

16 Feb, 2014

1 commit

  • 9113bfd82   Bluetooth: btusb: Add IMC Networks (Broadcom based) ... Browse Code »
    2

    Add support for IMC Networks (Broadcom based) to btusb driver.

    Below the output of /sys/kernel/debug/usb/devices for this device:

    T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
    D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=13d3 ProdID=3404 Rev= 1.12
    S: Manufacturer=Broadcom Corp
    S: Product=BCM20702A0
    S: SerialNumber=240A649F8246
    C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
    E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
    I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

    Signed-off-by: Jurgen Kramer
    Signed-off-by: Marcel Holtmann

    Jurgen Kramer
     

13 Feb, 2014

2 commits

  • 1e56f1eb2   Bluetooth: Add firmware update for Atheros 0cf3:311f ... Browse Code »
    2

    The device is not functional without firmware.

    The device without firmware:
    T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0cf3 ProdID=311f Rev=00.01
    C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

    The device with firmware:
    T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0cf3 ProdID=3007 Rev=00.01
    C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

    Signed-off-by: Oliver Neukum
    Signed-off-by: Marcel Holtmann

    Oliver Neukum
     
  • b131237ca   Bluetooth: Enable Atheros 0cf3:311e for firmware upload ... Browse Code »
    2

    The device will bind to btusb without firmware, but with the original
    buggy firmware device discovery does not work. No devices are detected.

    Device descriptor without firmware:
    T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0cf3 ProdID=311e Rev= 0.01
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

    with firmware:
    T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0cf3 ProdID=311e Rev= 0.02
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

    Signed-off-by: Oliver Neukum
    Signed-off-by: Marcel Holtmann

    Oliver Neukum
     

09 Jan, 2014

1 commit

07 Jan, 2014

1 commit

05 Jan, 2014

1 commit

  • 81cac64ba   Bluetooth: Deal with USB devices that are faking CSR vendor ... Browse Code »

    There exists a set of Bluetooth USB devices that show up on the USB
    bus as 0a12:0001 and identify themselves as devices from CSR. However
    they are not. When sending Read Local Version command they now have
    a split personality and say they are from Broadcom.

    < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
    > HCI Event: Command Complete (0x0e) plen 12
    Read Local Version Information (0x04|0x0001) ncmd 1
    status 0x00
    HCI Version: 2.0 (0x3) HCI Revision: 0x3000
    LMP Version: 2.0 (0x3) LMP Subversion: 0x420b
    Manufacturer: Broadcom Corporation (15)

    The assumption is that they are neither CSR nor Broadcom based devices
    and that they are designed and manufactured by someone else.

    For the most parts they follow the Bluetooth HCI specification and
    can be used as standard Bluetooth devices. However they have the
    minor problem that the Delete Stored Link Key command is not working
    as it should.

    During the Bluetooth controller setup, this command is needed if
    stored link keys are supported. For these devices it has to be
    assumed that this is broken and so just set a quirk to clearly
    indicate the behavior. After that the setup can just proceed.

    Now the trick part is to detect these faulty devices since we do
    not want to punish all CSR and all Broadcom devices. The original
    devices do actually work according to the specification.

    What is known so far is that these broken devices set the USB bcdDevice
    revision information to 1.0 or less.

    T: Bus=02 Lev=01 Prnt=01 Port=08 Cnt=03 Dev#= 9 Spd=12 MxCh= 0
    D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0a12 ProdID=0001 Rev= 1.00
    S: Manufacturer=Bluetooth v2.0
    S: Product=Bluetooth V2.0 Dongle

    T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0a12 ProdID=0001 Rev= 0.07

    In case of CSR devices, the bcdDevice revision contains the firmware
    build ID and that is normally a higher value. If the bcdDevice revision
    is 1.0 or less, then an extra setup stage is checking if Read Local
    Version returns CSR manufacturer information. If not then it will be
    assumed that this is a broken device and the Delete Stored Link Key
    command will be marked as broken.

    Signed-off-by: Marcel Holtmann
    Signed-off-by: Johan Hedberg

    Marcel Holtmann
     

30 Dec, 2013

2 commits

24 Dec, 2013

1 commit

04 Dec, 2013

8 commits

  • bd0976dd3   Bluetooth: Add support for Toshiba Bluetooth device [0930:0220] ... Browse Code »

    This patch adds support for new Toshiba Bluetooth device.

    T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0930 ProdID=0220 Rev=00.02
    C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

    Signed-off-by: Marco Piazza
    Signed-off-by: Gustavo Padovan

    Marco Piazza
     
  • d2bee8fb6   Bluetooth: Enable autosuspend for Intel Bluetooth device ... Browse Code »
    19

    This patch enables autosuspend for Intel Bluetooth device.

    After btusb is loaded for Intel Bluetooth device, the power/control
    attribute contains "on" value by default which disables the autosuspend.
    Based on the USB PM document(Documentation/usb/power-management.txt),
    kernel disabled the autosuspend for all devices other than hub by default.

    "The USB specification states that all USB devices must support power
    management. Nevertheless, the sad fact is that many devices do not
    support it very well. You can suspend them all right, but when you
    try to resume them they disconnect themselves from the USB bus or
    they stop working entirely. This seems to be especially prevalent
    among printers and scanners, but plenty of other types of device have
    the same deficiency.

    For this reason, by default the kernel disables autosuspend (the
    power/control attribute is initialized to "on") for all devices other
    than hubs. Hubs, at least, appear to be reasonably well-behaved in
    this regard."

    This document also described how the driver can enables the autosuspend
    by using an USB api.

    "Drivers can enable autosuspend for their devices by calling

    usb_enable_autosuspend(struct usb_device *udev);

    in their probe() routine, if they know that the device is capable of
    suspending and resuming correctly. This is exactly equivalent to
    writing "auto" to the device's power/control attribute."

    For Intel Bluetooth device, the autosuspend needs to be enabled so the
    device can transit to LPM(Low Power Mode) and ULPM(Ultra LPM) states after
    receiving suspend message from the host.

    Signed-off-by: Tedd Ho-Jeong An
    Signed-off-by: Marcel Holtmann

    Tedd Ho-Jeong An
     
  • ef4e5e4a7   Bluetooth: Add support for Intel Bluetooth device [8087:0a2a] ... Browse Code »

    This patch adds support for new Intel Bluetooth device.

    T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
    D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=8087 ProdID=0a2a Rev= 0.01
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
    I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
    I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
    I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
    I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

    Signed-off-by: Tedd Ho-Jeong An
    Signed-off-by: Marcel Holtmann

    Tedd Ho-Jeong An
     
  • 35580d223   Bluetooth: ath3k: Add support for a new AR3012 device ... Browse Code »

    T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 9 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=0489 ProdID=e05f Rev= 0.02
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

    Reported-by: Joshua Richenhagen
    Signed-off-by: Sujith Manoharan
    Signed-off-by: Johan Hedberg

    Sujith Manoharan
     
  • bd0fca1b2   Bluetooth: ath3k: Add support for another AR3012 card ... Browse Code »

    T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
    P: Vendor=04ca ProdID=300b Rev= 0.01
    C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
    A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

    Reported-by: Face
    Signed-off-by: Sujith Manoharan
    Signed-off-by: Marcel Holtmann

    Sujith Manoharan
     
  • 8a4934f1d   Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy ... Browse Code »

    The device tree property can define the cal-data in proper order.
    There is no need to swap the bytes in driver.
    Also remove the redundant cal-data memory copy after removing the
    byte swapping.

    Cc: Mike Frysinger
    Cc: Amitkumar Karwar
    Signed-off-by: Bing Zhao
    Signed-off-by: Hyuckjoo Lee
    Signed-off-by: Marcel Holtmann

    Bing Zhao
     
  • 433a9389a   Bluetooth: btmrvl: use cal-data from device-tree instead of conf file ... Browse Code »

    Some ARM versions of Chromebook need to download a new calibration
    data from host driver to firmware. They do have EEPROM but still
    need a piece of new calibration data in test mode.

    The cal-data is platform dependent. It's simpler and more feasible
    to use device tree based cal-data instead of configuration file
    based cal-data.

    This patch remove configuration file based cal-data downloading
    and replace it using cal-data from device tree.

    When CONFIG_OF is not selected, or the specific property is not
    present in the device tree, the calibration downloading will not
    happen.

    Cc: Mike Frysinger
    Cc: Amitkumar Karwar
    Signed-off-by: Bing Zhao
    Signed-off-by: Hyuckjoo Lee
    Signed-off-by: Marcel Holtmann

    Bing Zhao
     
  • 3e4543abf   Bluetooth: btmrvl: operate on 16-bit opcodes instead of ogf/ocf ... Browse Code »

    Replace ogf/ocf and its packing with 16-bit opcodes.

    Signed-off-by: Bing Zhao
    Signed-off-by: Amitkumar Karwar
    Signed-off-by: Marcel Holtmann

    Bing Zhao
     

06 Nov, 2013

1 commit

11 Oct, 2013

11 commits