03 Apr, 2014
1 commit
-
Pull networking updates from David Miller:
"Here is my initial pull request for the networking subsystem during
this merge window:1) Support for ESN in AH (RFC 4302) from Fan Du.
2) Add full kernel doc for ethtool command structures, from Ben
Hutchings.3) Add BCM7xxx PHY driver, from Florian Fainelli.
4) Export computed TCP rate information in netlink socket dumps, from
Eric Dumazet.5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
Dichtel.6) Convert many drivers to pci_enable_msix_range(), from Alexander
Gordeev.7) Record SKB timestamps more efficiently, from Eric Dumazet.
8) Switch to microsecond resolution for TCP round trip times, also
from Eric Dumazet.9) Clean up and fix 6lowpan fragmentation handling by making use of
the existing inet_frag api for it's implementation.10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.
11) Auto size SKB lengths when composing netlink messages based upon
past message sizes used, from Eric Dumazet.12) qdisc dumps can take a long time, add a cond_resched(), From Eric
Dumazet.13) Sanitize netpoll core and drivers wrt. SKB handling semantics.
Get rid of never-used-in-tree netpoll RX handling. From Eric W
Biederman.14) Support inter-address-family and namespace changing in VTI tunnel
driver(s). From Steffen Klassert.15) Add Altera TSE driver, from Vince Bridgers.
16) Optimizing csum_replace2() so that it doesn't adjust the checksum
by checksumming the entire header, from Eric Dumazet.17) Expand BPF internal implementation for faster interpreting, more
direct translations into JIT'd code, and much cleaner uses of BPF
filtering in non-socket ocntexts. From Daniel Borkmann and Alexei
Starovoitov"* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
net: Add a test to see if a skb is freeable in irq context
qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
net: ptp: move PTP classifier in its own file
net: sxgbe: make "core_ops" static
net: sxgbe: fix logical vs bitwise operation
net: sxgbe: sxgbe_mdio_register() frees the bus
Call efx_set_channels() before efx->type->dimension_resources()
xen-netback: disable rogue vif in kthread context
net/mlx4: Set proper build dependancy with vxlan
be2net: fix build dependency on VxLAN
mac802154: make csma/cca parameters per-wpan
mac802154: allow only one WPAN to be up at any given time
net: filter: minor: fix kdoc in __sk_run_filter
netlink: don't compare the nul-termination in nla_strcmp
can: c_can: Avoid led toggling for every packet.
can: c_can: Simplify TX interrupt cleanup
can: c_can: Store dlc private
can: c_can: Reduce register access
can: c_can: Make the code readable
...
04 Mar, 2014
1 commit
-
There were a couple of patches fixing the same bug that
results in duplicated err = 0; assignment.
The patch removes one of them.Signed-off-by: Alexey Khoroshilov
Signed-off-by: David S. Miller
08 Feb, 2014
1 commit
-
This allows replying only to the requestor portid while still
supporting broadcasting. Pass 0 to portid for the previous behavior.Signed-off-by: David Fries
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman
15 Nov, 2013
1 commit
-
In af3e095a1fb4, Erik Jacobsen fixed one type of unaligned access
bug for ia64 by converting a 64-bit write to use put_unaligned().
Unfortunately, since gcc will convert a short memset() to a series
of appropriately-aligned stores, the problem is now visible again
on tilegx, where the memset that zeros out proc_event is converted
to three 64-bit stores, causing an unaligned access panic.A better fix for the original problem is to ensure that proc_event
is aligned to 8 bytes here. We can do that relatively easily by
arranging to start the struct cn_msg aligned to 8 bytes and then
offset by 4 bytes. Doing so means that the immediately following
proc_event structure is then correctly aligned to 8 bytes.The result is that the memset() stores are now aligned, and as an
added benefit, we can remove the put_unaligned() calls in the code.Signed-off-by: Chris Metcalf
Signed-off-by: David S. Miller
03 Oct, 2013
3 commits
-
We calculated the size for the netlink message buffer as size. Use size
in the memcpy() call as well instead of recalculating it.Signed-off-by: Mathias Krause
Signed-off-by: David S. Miller -
The current code tests the length of the whole netlink message to be
at least as long to fit a cn_msg. This is wrong as nlmsg_len includes
the length of the netlink message header. Use nlmsg_len() instead to
fix this "off-by-NLMSG_HDRLEN" size check.Cc: stable@vger.kernel.org # v2.6.14+
Signed-off-by: Mathias Krause
Signed-off-by: David S. Miller -
Initialize event_data for all possible message types to prevent leaking
kernel stack contents to userland (up to 20 bytes). Also set the flags
member of the connector message to 0 to prevent leaking two more stack
bytes this way.Cc: stable@vger.kernel.org # v2.6.15+
Signed-off-by: Mathias Krause
Signed-off-by: David S. Miller
29 Mar, 2013
1 commit
-
Signed-off-by: Hong Zhiguo
Acked-by: Thomas Graf
Signed-off-by: David S. Miller
21 Mar, 2013
1 commit
-
Process connector can now also detect coredumping events.
Main aim of patch is get notified at start of coredumping, instead of
having to wait for it to finish and then being notified through EXIT
event.Could be used for instance by process-managers that want to get
notified as soon as possible about process failures, and not
necessarily beeing notified after coredump, which could be in the
order of minutes depending on size of coredump, piping and so on.Signed-off-by: Jesper Derehag
Signed-off-by: David S. Miller
28 Feb, 2013
1 commit
-
While PROC_CN_MCAST_LISTEN/IGNORE is entirely advisory, it was possible
for an unprivileged user to turn off notifications for all listeners by
sending PROC_CN_MCAST_IGNORE. Instead, require the same privileges as
required for a multicast bind.Signed-off-by: Kees Cook
Cc: Evgeniy Polyakov
Cc: Matt Helsley
Cc: stable@vger.kernel.org
Acked-by: Evgeniy Polyakov
Acked-by: Matt Helsley
Signed-off-by: David S. Miller
19 Feb, 2013
2 commits
-
proc_net_remove is only used to remove proc entries
that under /proc/net,it's not a general function for
removing proc entries of netns. if we want to remove
some proc entries which under /proc/net/stat/, we still
need to call remove_proc_entry.this patch use remove_proc_entry to replace proc_net_remove.
we can remove proc_net_remove after this patch.Signed-off-by: Gao feng
Signed-off-by: David S. Miller -
Right now, some modules such as bonding use proc_create
to create proc entries under /proc/net/, and other modules
such as ipv4 use proc_net_fops_create.It looks a little chaos.this patch changes all of
proc_net_fops_create to proc_create. we can remove
proc_net_fops_create after this patch.Signed-off-by: Gao feng
Signed-off-by: David S. Miller
04 Jan, 2013
1 commit
-
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.Cc: Bill Pemberton
Signed-off-by: Greg Kroah-Hartman
03 Oct, 2012
1 commit
-
Pull networking changes from David Miller:
1) GRE now works over ipv6, from Dmitry Kozlov.
2) Make SCTP more network namespace aware, from Eric Biederman.
3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.
4) Make openvswitch network namespace aware, from Pravin B Shelar.
5) IPV6 NAT implementation, from Patrick McHardy.
6) Server side support for TCP Fast Open, from Jerry Chu and others.
7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
Borkmann.8) Increate the loopback default MTU to 64K, from Eric Dumazet.
9) Use a per-task rather than per-socket page fragment allocator for
outgoing networking traffic. This benefits processes that have very
many mostly idle sockets, which is quite common.From Eric Dumazet.
10) Use up to 32K for page fragment allocations, with fallbacks to
smaller sizes when higher order page allocations fail. Benefits are
a) less segments for driver to process b) less calls to page
allocator c) less waste of space.From Eric Dumazet.
11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.
12) VXLAN device driver, one way to handle VLAN issues such as the
limitation of 4096 VLAN IDs yet still have some level of isolation.
From Stephen Hemminger.13) As usual there is a large boatload of driver changes, with the scale
perhaps tilted towards the wireless side this time around.Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
hyperv: Add buffer for extended info after the RNDIS response message.
hyperv: Report actual status in receive completion packet
hyperv: Remove extra allocated space for recv_pkt_list elements
hyperv: Fix page buffer handling in rndis_filter_send_request()
hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
hyperv: Fix the max_xfer_size in RNDIS initialization
vxlan: put UDP socket in correct namespace
vxlan: Depend on CONFIG_INET
sfc: Fix the reported priorities of different filter types
sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
sfc: Fix loopback self-test with separate_tx_channels=1
sfc: Fix MCDI structure field lookup
sfc: Add parentheses around use of bitfield macro arguments
sfc: Fix null function pointer in efx_sriov_channel_type
vxlan: virtual extensible lan
igmp: export symbol ip_mc_leave_group
netlink: add attributes to fdb interface
tg3: unconditionally select HWMON support when tg3 is enabled.
Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
gre: fix sparse warning
...
09 Sep, 2012
1 commit
-
This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).Suggested by David S. Miller.
Signed-off-by: Pablo Neira Ayuso
Signed-off-by: David S. Miller
07 Sep, 2012
1 commit
-
- Only allow asking for events from the initial user and pid namespace,
where we generate the events in.- Convert kuids and kgids into the initial user namespace to report
them via the process event connector.Cc: David Miller
Acked-by: Evgeniy Polyakov
Acked-by: Serge Hallyn
Signed-off-by: Eric W. Biederman
17 Jul, 2012
1 commit
-
V2: Replaced assignment in if statement.
Fixed coding style issues.Signed-off-by: Valentin Ilie
Signed-off-by: David S. Miller
30 Jun, 2012
1 commit
-
This patch adds the following structure:
struct netlink_kernel_cfg {
unsigned int groups;
void (*input)(struct sk_buff *skb);
struct mutex *cb_mutex;
};That can be passed to netlink_kernel_create to set optional configurations
for netlink kernel sockets.I've populated this structure by looking for NULL and zero parameters at the
existing code. The remaining parameters that always need to be set are still
left in the original interface.That includes optional parameters for the netlink socket creation. This allows
easy extensibility of this interface in the future.This patch also adapts all callers to use this new interface.
Signed-off-by: Pablo Neira Ayuso
Signed-off-by: David S. Miller
27 Jun, 2012
1 commit
-
The NLMSG_PUT() macro contains a hidden goto which makes the code hard
to audit and very error prone.While been there also use the inline function nlmsg_data() instead of the
NLMSG_DATA() macro to do explicit type checking.Signed-off-by: Javier Martinez Canillas
Signed-off-by: David S. Miller
29 Sep, 2011
1 commit
-
Add an event to monitor comm value changes of tasks. Such an event
becomes vital, if someone desires to control threads of a process in
different manner.A natural characteristic of threads is its comm value, and helpfully
application developers have an opportunity to change it in runtime.
Reporting about such events via proc connector allows to fine-grain
monitoring and control potentials, for instance a process control daemon
listening to proc connector and following comm value policies can place
specific threads to assigned cgroup partitions.It might be possible to achieve a pale partial one-shot likeness without
this update, if an application changes comm value of a thread generator
task beforehand, then a new thread is cloned, and after that proc
connector listener gets the fork event and reads new thread's comm value
from procfs stat file, but this change visibly simplifies and extends the
matter.Signed-off-by: Vladimir Zapolskiy
Acked-by: Evgeniy Polyakov
Cc: David Miller
Signed-off-by: Andrew Morton
Signed-off-by: David S. Miller
29 Jul, 2011
1 commit
-
proc_fork_connector() uses ->real_parent lockless. This is not safe if
copy_process() was called with CLONE_THREAD or CLONE_PARENT, in this case
the parent != current can go away at any moment.Signed-off-by: Oleg Nesterov
Cc: Vladimir Zapolskiy
Cc: "David S. Miller"
Cc: Evgeniy Polyakov
Cc: Evgeniy Polyakov
Signed-off-by: Andrew Morton
Signed-off-by: David S. Miller
27 Jul, 2011
1 commit
-
This allows us to move duplicated code in
(atomic_inc_not_zero() for now) toSigned-off-by: Arun Sharma
Reviewed-by: Eric Dumazet
Cc: Ingo Molnar
Cc: David Miller
Cc: Eric Dumazet
Acked-by: Mike Frysinger
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
26 Jul, 2011
1 commit
-
Fix the warning
drivers/connector/cn_proc.c: In function 'proc_ptrace_connector':
drivers/connector/cn_proc.c:176: warning: unused variable 'tracer'Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
23 Jul, 2011
1 commit
-
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
connector: add an event for monitoring process tracers
ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
ptrace_init_task: initialize child->jobctl explicitly
has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
ptrace: ptrace_reparented() should check same_thread_group()
redefine thread_group_leader() as exit_signal >= 0
do not change dead_task->exit_signal
kill task_detached()
reparent_leader: check EXIT_DEAD instead of task_detached()
make do_notify_parent() __must_check, update the callers
__ptrace_detach: avoid task_detached(), check do_notify_parent()
kill tracehook_notify_death()
make do_notify_parent() return bool
ptrace: s/tracehook_tracer_task()/ptrace_parent()/
...
19 Jul, 2011
1 commit
-
This change adds a procfs connector event, which is emitted on every
successful process tracer attach or detach.If some process connects to other one, kernelspace connector reports
process id and thread group id of both these involved processes. On
disconnection null process id is returned.Such an event allows to create a simple automated userspace mechanism
to be aware about processes connecting to others, therefore predefined
process policies can be applied to them if needed.Note, a detach signal is emitted only in case, if a tracer process
explicitly executes PTRACE_DETACH request. In other cases like tracee
or tracer exit detach event from proc connector is not reported.Signed-off-by: Vladimir Zapolskiy
Acked-by: Evgeniy Polyakov
Cc: David S. Miller
Signed-off-by: Oleg Nesterov
08 Jun, 2011
1 commit
-
The recent changes to the connector code introduced this bug where even
when a callback was invoked, we would return an error resulting in
double freeing of the skb. This patch fixes this bug.Signed-off-by: K. Y. Srinivasan
Acked-by: Evgeniy Polyakov
Cc: stable [.39]
Signed-off-by: Greg Kroah-Hartman
13 Apr, 2011
1 commit
-
When a skb is delivered to a registered callback, cn_call_callback()
incorrectly returns -ENODEV after freeing the skb, causing cn_rx_skb()
to free the skb a second time.Reported-by: Eric B Munson
Signed-off-by: Patrick McHardy
Tested-by: Eric B Munson
Signed-off-by: David S. Miller
31 Mar, 2011
1 commit
-
Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms)
and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct
netlink_skb_parms) removed some members from struct netlink_skb_parms
that depend on the current context, all netlink users are now required
to do synchronous message processing.connector however queues received messages and processes them in a work
queue, which is not valid anymore. This patch converts connector to do
synchronous message processing by invoking the registered callback handler
directly from the netlink receive function.In order to avoid invoking the callback with connector locks held, a
reference count is added to struct cn_callback_entry, the reference
is taken when finding a matching callback entry on the device's queue_list
and released after the callback handler has been invoked.Signed-off-by: Patrick McHardy
Acked-by: Evgeniy Polyakov
Signed-off-by: David S. Miller
24 Feb, 2011
1 commit
-
Allow more const declarations.
Signed-off-by: Joe Perches
Acked-by: Evgeniy Polyakov
Signed-off-by: Greg Kroah-Hartman
17 Dec, 2010
1 commit
-
The patch was originally in the use cpuops patchset but it needs an
inc_return and is therefore dependent on an extension of the cpu ops.
Fixed up and verified that it compiles.get_seq can benefit from this_cpu_operations. Address calculation is
avoided and the increment is done using an xadd.Cc: Scott James Remnant
Cc: Mike Frysinger
Acked-by: H. Peter Anvin
Signed-off-by: Christoph Lameter
Signed-off-by: Tejun Heo
11 Dec, 2010
1 commit
-
Since connector can be built as a module and uses netlink socket
to communicate. The module should have an alias to autoload when socket
of NETLINK_CONNECTOR type is requested.Signed-off-by: Stephen Hemminger
Acked-by: Evgeniy Polyakov
Signed-off-by: David S. Miller
25 Oct, 2010
1 commit
-
Commit 1a5645bc (connector: create connector workqueue only while
needed once) implements lazy workqueue creation for connector
workqueue. With cmwq now in place, lazy workqueue creation doesn't
make much sense while adding a lot of complexity. Remove it and
allocate an ordered workqueue during initialization.This also removes a call to flush_scheduled_work() which is deprecated
and scheduled to be removed.Signed-off-by: Tejun Heo
Cc: Frederic Weisbecker
Signed-off-by: David S. Miller
30 Mar, 2010
1 commit
-
…it slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
03 Feb, 2010
1 commit
-
On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote:
> > There are at least two ways to fix it: using a big cannon and a small
> > one. The former way is to disable notification registration, since it is
> > not used by anyone at all. Second way is to check whether calling
> > process is root and its destination group is -1 (kind of priveledged
> > one) before command is dispatched to workqueue.
>
> Well if no one is using it, removing it makes the most sense, right?
>
> No objection from me, care to make up a patch either way for this?Getting it is not used, let's drop support for notifications about
(un)registered events from connector.
Another option was to check credentials on receiving, but we can always
restore it without bugs if needed, but genetlink has a wider code base
and none complained, that userspace can not get notification when some
other clients were (un)registered.Kudos for Sebastian Krahmer , who found a bug in the
code.Signed-off-by: Evgeniy Polyakov
Acked-by: Greg Kroah-Hartman
Signed-off-by: David S. Miller
06 Oct, 2009
1 commit
-
Commit 7069331 (connector: Provide the sender's credentials to the
callback, 2009-10-02) changed callbacks to take two arguments but missed
this one.drivers/connector/cn_proc.c: In function ‘cn_proc_init’:
drivers/connector/cn_proc.c:263: warning: passing argument 3 of
‘cn_add_callback’ from incompatible pointer typeSigned-off-by: Stephen Boyd
Signed-off-by: David S. Miller
03 Oct, 2009
3 commits
-
Signed-off-by: Philipp Reisner
Acked-by: Lars Ellenberg
Acked-by: Evgeniy Polyakov
Signed-off-by: David S. Miller -
Signed-off-by: Philipp Reisner
Acked-by: Lars Ellenberg
Acked-by: Evgeniy Polyakov
Signed-off-by: David S. Miller -
Signed-off-by: Philipp Reisner
Acked-by: Lars Ellenberg
Acked-by: Evgeniy Polyakov
Signed-off-by: David S. Miller
23 Sep, 2009
1 commit
-
The act of a process becoming a session leader is a useful signal to a
supervising init daemon such as Upstart.While a daemon will normally do this as part of the process of becoming a
daemon, it is rare for its children to do so. When the children do, it is
nearly always a sign that the child should be considered detached from the
parent and not supervised along with it.The poster-child example is OpenSSH; the per-login children call setsid()
so that they may control the pty connected to them. If the primary daemon
dies or is restarted, we do not want to consider the per-login children
and want to respawn the primary daemon without killing the children.This patch adds a new PROC_SID_EVENT and associated structure to the
proc_event event_data union, it arranges for this to be emitted when the
special PIDTYPE_SID pid is set.[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Scott James Remnant
Acked-by: Matt Helsley
Cc: Oleg Nesterov
Cc: Evgeniy Polyakov
Acked-by: "David S. Miller"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 Jul, 2009
1 commit
-
Conflicts:
drivers/net/wireless/iwmc3200wifi/netdev.c
net/wireless/scan.c
