02 Oct, 2014
1 commit
-
Kconfig never defines CONFIG_* as 'n'.
Now obj-n is only used in firmware/Makefile and it can be
replaced with obj-. No makefile uses lib-n.Let's rip off obj-n and lib-n.
Signed-off-by: Masahiro Yamada
Acked-by: Peter Foley
Signed-off-by: Michal Marek
09 Jul, 2014
1 commit
-
Commit 5180d5f4 ("firmware: Simplify directory creation") broke
including firmware specified in CONFIG_EXTRA_FIRMWARE:MK_FW firmware/amd-ucode/microcode_amd.bin.gen.S
/bin/sh: firmware/amd-ucode/microcode_amd.bin.gen.S: No such file or directory
...
firmware/Makefile:185: recipe for target
'firmware/amd-ucode/microcode_amd.bin.gen.S' failedIt works with O= builds, because the directory is created by
Makefile.build. Create the directory in firmware/Makefile in non-O
builds.Reported-and-tested-by: Ronald Uitermark
Reported-and-tested-by: Torsten Kaiser
Signed-off-by: Michal Marek
15 May, 2014
2 commits
-
The literal " confuses syntax highlighting in vim.
Cc: David Woodhouse
Acked-by: Sam Ravnborg
Signed-off-by: Michal Marek -
When building the firmware blobs, use a simple loop to create
directories in $(objtree), like in Makefile.build. This simplifies the
rules and also makes it possible to set $(objtree) to '.' later. Before
this change, a dependency on $(objtree)/ would be satisfied by
in $(srctree).When installing the firmware blobs, call mkdir like in Makefile.modinst.
Cc: David Woodhouse
Acked-by: Sam Ravnborg
Signed-off-by: Michal Marek
06 Apr, 2013
1 commit
-
Commit e2eed58b4fbf ("IB/qib: change QLogic to Intel") moved a firmware
file potentially breaking the ABI.This patch reverts that aspect of the fix as well as reverting the
firmware name as used in qib.Reported-by: David Woodhouse
Signed-off-by: Mike Marciniszyn
Signed-off-by: Linus Torvalds
23 Mar, 2013
1 commit
-
These changes modify the qib driver as part of acquiring
the InfiniBand assets of QLogic.Reviewed-by: Mike Marciniszyn
Reviewed-by: Dean Luick
Signed-off-by: Vinit Agnihotri
Signed-off-by: Roland Dreier
22 Nov, 2012
1 commit
-
dabusb was removed with commit dae86ccbc3 ("[media] dabusb: remove
obsolete driver"), so remove the last vestiges of firmware and
documentation.Signed-off-by: Tim Gardner
Cc: Rob Landley
Cc: Paul Gortmaker
Cc: Ben Hutchings
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman
03 Oct, 2012
1 commit
-
Pull networking changes from David Miller:
1) GRE now works over ipv6, from Dmitry Kozlov.
2) Make SCTP more network namespace aware, from Eric Biederman.
3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.
4) Make openvswitch network namespace aware, from Pravin B Shelar.
5) IPV6 NAT implementation, from Patrick McHardy.
6) Server side support for TCP Fast Open, from Jerry Chu and others.
7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
Borkmann.8) Increate the loopback default MTU to 64K, from Eric Dumazet.
9) Use a per-task rather than per-socket page fragment allocator for
outgoing networking traffic. This benefits processes that have very
many mostly idle sockets, which is quite common.From Eric Dumazet.
10) Use up to 32K for page fragment allocations, with fallbacks to
smaller sizes when higher order page allocations fail. Benefits are
a) less segments for driver to process b) less calls to page
allocator c) less waste of space.From Eric Dumazet.
11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.
12) VXLAN device driver, one way to handle VLAN issues such as the
limitation of 4096 VLAN IDs yet still have some level of isolation.
From Stephen Hemminger.13) As usual there is a large boatload of driver changes, with the scale
perhaps tilted towards the wireless side this time around.Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
hyperv: Add buffer for extended info after the RNDIS response message.
hyperv: Report actual status in receive completion packet
hyperv: Remove extra allocated space for recv_pkt_list elements
hyperv: Fix page buffer handling in rndis_filter_send_request()
hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
hyperv: Fix the max_xfer_size in RNDIS initialization
vxlan: put UDP socket in correct namespace
vxlan: Depend on CONFIG_INET
sfc: Fix the reported priorities of different filter types
sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
sfc: Fix loopback self-test with separate_tx_channels=1
sfc: Fix MCDI structure field lookup
sfc: Add parentheses around use of bitfield macro arguments
sfc: Fix null function pointer in efx_sriov_channel_type
vxlan: virtual extensible lan
igmp: export symbol ip_mc_leave_group
netlink: add attributes to fdb interface
tg3: unconditionally select HWMON support when tg3 is enabled.
Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
gre: fix sparse warning
...
17 Aug, 2012
1 commit
-
The only Computone support left in the kernel is in
drivers/tty/serial/8250/8250_pci.c. CONFIG_COMPUTONE is no longer a valid
option. Therefore, remove firmware, documentation, and the last vestiges
of this driver.Cc: Rob Landley
Cc: Paul Gortmaker
Cc: Ben Hutchings
Cc: James Bottomley
Cc: Dan Williams
Signed-off-by: Tim Gardner
Signed-off-by: Andrew Morton
Signed-off-by: Greg Kroah-Hartman
02 Aug, 2012
1 commit
-
The current firmware version used by the device driver
is 7.12.0Cc: Paul Gortmaker
Cc: Ben Hutchings
Cc: James Bottomley
Cc: Dan Williams
Cc: Divy Le Ray
Cc: netdev@vger.kernel.org
Signed-off-by: Tim Gardner
16 May, 2012
1 commit
-
This represents the mass deletion of the of the tokenring support.
It gets rid of:
- the net/tr.c which the drivers depended on
- the drivers/net component
- the Kbuild infrastructure around it
- any tokenring related CONFIG_ settings in any defconfigs
- the tokenring headers in the include/linux dir
- the firmware associated with the tokenring drivers.
- any associated token ring documentation.Signed-off-by: Paul Gortmaker
16 Jan, 2012
1 commit
-
This parameter blob and generator program have been moved to the
linux-firmware.git repository.Signed-off-by: Ben Hutchings
Signed-off-by: Dan Williams
Signed-off-by: James Bottomley
03 Jul, 2011
1 commit
-
Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
chipset.This is a snapshot of the first publicly available version of the driver,
commit 4c1db2d0 in the 'historical' branch.git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical
Signed-off-by: Maciej Trela
Signed-off-by: Dave Jiang
Signed-off-by: Edmund Nadolski
Signed-off-by: Dan Williams
01 Apr, 2011
1 commit
-
To fix bugs when running offloaded FCoE/iSCSI traffic in multiple
Class of Service environments. In some scenarios, traffic could stop
on certain rings and eventually all traffic would stop.Signed-off-by: Dmitry Kravkov
Signed-off-by: Michael Chan
Signed-off-by: David S. Miller
15 Mar, 2011
1 commit
-
Update 5709 mips firmware to 6.2.1a to fix iSCSI performance
regression. There was an unnecessary context read in the fast path
affecting performance.Update bnx2 to 2.1.6.
Signed-off-by: Michael Chan
Signed-off-by: David S. Miller
01 Jan, 2011
1 commit
-
Update MIPS firmware to 6.2.1, with improved small packet performance
in RSS mode, and iSCSI CID allocation bug fix on 5708.Update driver version to 2.0.21.
Signed-off-by: Michael Chan
Signed-off-by: David S. Miller
17 Dec, 2010
1 commit
-
Includes FCoE releated fixes in FW flows
Signed-off-by: Dmitry Kravkov
Signed-off-by: Eilon Greenstein
Signed-off-by: David S. Miller
12 Oct, 2010
1 commit
-
- Improved flow control and simplified interface
- Use hardware RSS indirection table instead of the slower firmware-
based table
- Lower latency interrupt on 5709Signed-off-by: Michael Chan
Reviewed-by: Benjamin Li
Signed-off-by: David S. Miller
07 Oct, 2010
3 commits
-
57712 HW supported with same set of features as for 57710/57711
Signed-off-by: Dmitry Kravkov
Signed-off-by: Eilon Greenstein
Signed-off-by: David S. Miller -
This is the new FW HSI blob and the relevant definitions without logic changes.
It also included code adaptation for new HSI. New features are not enabled.New FW/HSI includes:
- Support for 57712 HW
- Future support for VF (not used)
- Improvements in FW interrupts scheme
- FW FCoE hooks (stubs for future usage)Signed-off-by: Dmitry Kravkov
Signed-off-by: Michael Chan
Signed-off-by: Eilon Greenstein
Signed-off-by: David S. Miller -
Signed-off-by: Dmitry Kravkov
Signed-off-by: Eilon Greenstein
Signed-off-by: David S. Miller
20 Aug, 2010
1 commit
17 Aug, 2010
1 commit
-
It doesn't like pattern and explicit rules to be on the same line,
and it seems to be more picky when matching file (or really directory)
names with different numbers of trailing slashes.Signed-off-by: Jan Beulich
Acked-by: Sam Ravnborg
Andrew Benton
Cc:
Signed-off-by: Michal Marek
05 Aug, 2010
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
phy/marvell: add 88ec048 support
igb: Program MDICNFG register prior to PHY init
e1000e: correct MAC-PHY interconnect register offset for 82579
hso: Add new product ID
can: Add driver for esd CAN-USB/2 device
l2tp: fix export of header file for userspace
can-raw: Fix skb_orphan_try handling
Revert "net: remove zap_completion_queue"
net: cleanup inclusion
phy/marvell: add 88e1121 interface mode support
u32: negative offset fix
net: Fix a typo from "dev" to "ndev"
igb: Use irq_synchronize per vector when using MSI-X
ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
e1000e: Fix irq_synchronize in MSI-X case
e1000e: register pm_qos request on hardware activation
ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
net: Add getsockopt support for TCP thin-streams
cxgb4: update driver version
cxgb4: add new PCI IDs
...Manually fix up conflicts in:
- drivers/net/e1000e/netdev.c: due to pm_qos registration
infrastructure changes
- drivers/net/phy/marvell.c: conflict between adding 88ec048 support
and cleaning up the IDs
- drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
conflict (registration change vs marking it static)
09 Jul, 2010
1 commit
-
Extract the microcode for the QLogic QLE7220 series IB HCA and use the
kernel microcode request facility to load the microcode. This
supports Debian Linux's requirements to separate microcode which
doesn't have open source code available from the device driver.Signed-off-by: Ben Hutchings
Signed-off-by: Roland Dreier
26 Jun, 2010
1 commit
-
Update FW to 7.10
Signed-off-by: Divy Le Ray
Signed-off-by: David S. Miller
18 May, 2010
1 commit
-
New firmware fixes a performance regression on small packets.
Signed-off-by: Michael Chan
Signed-off-by: David S. Miller
18 Feb, 2010
1 commit
-
Switch to the new firmware version (5.2.13).
Signed-off-by: Vladislav Zolotarov
Signed-off-by: Eilon Greenstein
Signed-off-by: David S. Miller
17 Feb, 2010
1 commit
-
- Increase FTQ depth to 256 to ehnabce performance.
- Fix RV2P context corruption on 5709 when flow control is enabled.Signed-off-by: Michael Chan
Signed-off-by: David S. Miller
07 Jan, 2010
1 commit
-
pcnet_cs,serial_cs:
add cis of KTI PE520 pcmcia network card,
and serial card(Sierra Wireless AC860).Signed-off-by: Ken Kawasaki
Signed-off-by: David S. Miller
06 Nov, 2009
1 commit
-
Conflicts:
drivers/net/usb/cdc_ether.cAll CDC ethernet devices of type USB_CLASS_COMM need to use
'&mbm_info'.Signed-off-by: David S. Miller
30 Oct, 2009
1 commit
-
pcnet_cs,serial_cs:
add cis of PreMax ethernet pcmcia card,
and some Sierra Wireless serial card(AC555, AC7xx, AC8xx).use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same.
Signed-off-by: Ken Kawasaki
Signed-off-by: David S. Miller
15 Oct, 2009
1 commit
-
Value of zero was used to disable the fairness mechanism. Though the code
(driver and FW) allowed changing the value at run time, it did not allow to do
that if the mechanism was disabled to begin with.
Fixed the FW to allow turning on and off the mechanism at run time. Fixed the
code to read the value from the chip at the right sequence.
Without this fix, if the initial value was set to zero, traffic could not run on
the interface.Signed-off-by: Eilon Greenstein
Signed-off-by: David S. Miller
05 Oct, 2009
1 commit
-
pcnet_cs,serial_cs:
add cis of National Semicondoctor's lan&modem mulitifunction pcmcia card,
NE2K, tamarack ethernet card,
and some serial card(COMpad2, COMpad4).Signed-off-by: Ken Kawasaki
Signed-off-by: David S. Miller
21 Sep, 2009
1 commit
-
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
drm/vgaarb: add VGA arbitration support to the drm and kms.
drm/radeon: some r420s have a CP race with the DMA engine.
drm/radeon/r600/kms: rv670 is not DCE3
drm/radeon/kms: r420 idle after programming GA_ENHANCE
drm/radeon/kms: more fixes to rv770 suspend/resume path.
drm/radeon/kms: more alignment for rv770.c with r600.c
drm/radeon/kms: rv770 blit init called too late.
drm/radeon/kms: move around new init path code to avoid posting at init
drm/radeon/r600: fix some issues with suspend/resume.
drm/radeon/kms: disable VGA rendering engine before taking over VRAM
drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
drm/radeon/kms: add initial connector properties
drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
drm/radeon/kms: don't fail if we fail to init GPU acceleration
drm/r600/kms: fixup number of loops per blit calculation.
drm/radeon/kms: reprogram format in set base.
drm/radeon: avivo chips have no separate int bit for display
drm/radeon/r600: don't do interrupts
drm: fix _DRM_GEM addmap error message
drm: update crtc x/y when only fb changes
...Fixed up trivial conflicts in firmware/Makefile due to network driver
(cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
other.
15 Sep, 2009
1 commit
-
pcnet_cs,serial_cs:
add cis of Linksys lan&modem mulitifunction pcmcia card
and some modem card(MT5634ZLX, RS-COM-2P).Signed-off-by: Ken Kawasaki
Signed-off-by: David S. Miller
31 Aug, 2009
1 commit
-
Loosely based on a patch by
Jaswinder Singh Rajput .KMS support by Dave Airlie .
For Radeon 100- to 500-series, firmware blobs look like:
struct {
__be32 datah;
__be32 datal;
} cp_ucode[256];For Radeon 600-series, there are two separate firmware blobs:
__be32 me_ucode[PM4_UCODE_SIZE * 3];
__be32 pfp_ucode[PFP_UCODE_SIZE];For Radeon 700-series, likewise:
__be32 me_ucode[R700_PM4_UCODE_SIZE];
__be32 pfp_ucode[R700_PFP_UCODE_SIZE];Signed-off-by: Ben Hutchings
Signed-off-by: Dave Airlie
29 Aug, 2009
1 commit
-
- Better small packet receive performance.
- Better handling of Flow control on 5709.
- Fixed iSCSI TMP ABORT TASK problem.
- Added iSCSI TCP timestamp option.Signed-off-by: Michael Chan
Signed-off-by: David S. Miller
27 Aug, 2009
2 commits
-
Firmware blob looks like this:
__be32 datah
__be32 datalSigned-off-by: Ben Hutchings
Signed-off-by: Dave Airlie -
Image format is IHEX, one record for each pipe in order (record
addresses are ignored).Signed-off-by: Ben Hutchings
Signed-off-by: Dave Airlie