15 Dec, 2014
1 commit
-
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev__once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
05 Nov, 2014
1 commit
-
The driver uses devm_gpiod_get_index(..., index) so that the index refers
directly to the GpioIo resource under the ACPI device. The problem with
this is that if the ordering changes we get wrong GPIOs.With ACPI 5.1 _DSD we can now use names instead to reference GPIOs
analogous to Device Tree. However, we still have systems out there that do
not provide _DSD at all. These systems must be supported as well.Luckily we now have acpi_dev_add_driver_gpios() that can be used to provide
mappings for systems where _DSD is not provided and still take advantage of
_DSD if it exists.This patch changes the driver to create default GPIO mappings if we are
running on ACPI system.While there we can drop the indices completely and use devm_gpiod_get()
with name instead.Signed-off-by: Mika Westerberg
Reviewed-by: Johannes Berg
Acked-by: John W. Linville
Acked-by: Linus Walleij
Signed-off-by: Rafael J. Wysocki
20 Oct, 2014
1 commit
-
A platform_driver does not need to set an owner, it will be populated by the
driver core.Signed-off-by: Wolfram Sang
09 Oct, 2014
1 commit
-
s/state/blocked
Signed-off-by: Fabian Frederick
Signed-off-by: John W. Linville
23 Sep, 2014
1 commit
-
Clock is disabled when the device is blocked.
So, clock_enabled is the logical negation of "blocked".Signed-off-by: Loic Poulain
Signed-off-by: John W. Linville
17 Sep, 2014
1 commit
-
For the ACPI based switches the MODULE_DEVICE_TABLE is missing to
export the entries for module auto-loading.Signed-off-by: Marcel Holtmann
Signed-off-by: John W. Linville
26 Aug, 2014
1 commit
-
This adds one more ACPI ID of a Broadcom bluetooth chip.
Signed-off-by: Mika Westerberg
Signed-off-by: John W. Linville
23 May, 2014
1 commit
07 May, 2014
1 commit
-
If gpio controller requires waiting for read and write
GPIO values, then we have to use the gpio cansleep api.
Fix the rfkill_gpio_set_power which calls only the
nonsleep version (causing kernel warning).
There is no problem to use the cansleep version here
because we are not in IRQ handler or similar context
(cf rfkill_set_block).Signed-off-by: Loic Poulain
Signed-off-by: Johannes Berg
11 Apr, 2014
4 commits
-
There is no need to dynamically generate the names. This
will fix a static checker warning..net/rfkill/rfkill-gpio.c:144 rfkill_gpio_probe()
warn: variable dereferenced before check 'rfkill->name'Acked-by: Alexandre Courbot
Reviewed-by: Linus Walleij
Reported-by: Dan Carpenter
Signed-off-by: Heikki Krogerus
Signed-off-by: Johannes Berg -
This adds ACPI IDs for Broadcom bluetooth chip BCM43241 used
on various Baytrail based boards such as Lenovo Miix 2 and
Asus Transformer Book T100TA.Acked-by: Alexandre Courbot
Signed-off-by: Heikki Krogerus
Signed-off-by: Johannes Berg -
On Lenovo Miix 2 8", BCM4752 is renamed LNV4752.
Acked-by: Alexandre Courbot
Signed-off-by: Heikki Krogerus
Signed-off-by: Johannes Berg -
After upgrading to descriptor based gpios, the gpio numbers
are not used anymore. The power_clk_name and the platform
specific setup and close hooks are not used by anybody, and
we should not encourage use of such things, so removing them.Acked-by: Alexandre Courbot
Reviewed-by: Linus Walleij
Signed-off-by: Heikki Krogerus
Signed-off-by: Johannes Berg
05 Feb, 2014
1 commit
-
This patch moves the rfkill poll_work to the power efficient workqueue.
This work does not have to be bound to the CPU that scheduled it, hence
the selection of CPU that executes it would be left to the scheduler.
Net result is that CPU idle times would be extended, resulting in power
savings.This behaviour is enabled when CONFIG_WQ_POWER_EFFICIENT is selected.
Cc: "John W. Linville"
Cc: "David S. Miller"
Signed-off-by: Shaibal Dutta
[zoran.markovic@linaro.org: Rebased to latest kernel, added commit message.
Fixed workqueue selection after suspend/resume cycle.]
Signed-off-by: Zoran Markovic
Signed-off-by: Johannes Berg
26 Jan, 2014
1 commit
-
Pull networking updates from David Miller:
1) BPF debugger and asm tool by Daniel Borkmann.
2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.
3) Correct reciprocal_divide and update users, from Hannes Frederic
Sowa and Daniel Borkmann.4) Currently we only have a "set" operation for the hw timestamp socket
ioctl, add a "get" operation to match. From Ben Hutchings.5) Add better trace events for debugging driver datapath problems, also
from Ben Hutchings.6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we
have a small send and a previous packet is already in the qdisc or
device queue, defer until TX completion or we get more data.7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.
8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
Borkmann.9) Share IP header compression code between Bluetooth and IEEE802154
layers, from Jukka Rissanen.10) Fix ipv6 router reachability probing, from Jiri Benc.
11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.
12) Support tunneling in GRO layer, from Jerry Chu.
13) Allow bonding to be configured fully using netlink, from Scott
Feldman.14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
already get the TCI. From Atzm Watanabe.15) New "Heavy Hitter" qdisc, from Terry Lam.
16) Significantly improve the IPSEC support in pktgen, from Fan Du.
17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom
Herbert.18) Add Proportional Integral Enhanced packet scheduler, from Vijay
Subramanian.19) Allow openvswitch to mmap'd netlink, from Thomas Graf.
20) Key TCP metrics blobs also by source address, not just destination
address. From Christoph Paasch.21) Support 10G in generic phylib. From Andy Fleming.
22) Try to short-circuit GRO flow compares using device provided RX
hash, if provided. From Tom Herbert.The wireless and netfilter folks have been busy little bees too.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
net/cxgb4: Fix referencing freed adapter
ipv6: reallocate addrconf router for ipv6 address when lo device up
fib_frontend: fix possible NULL pointer dereference
rtnetlink: remove IFLA_BOND_SLAVE definition
rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
qlcnic: update version to 5.3.55
qlcnic: Enhance logic to calculate msix vectors.
qlcnic: Refactor interrupt coalescing code for all adapters.
qlcnic: Update poll controller code path
qlcnic: Interrupt code cleanup
qlcnic: Enhance Tx timeout debugging.
qlcnic: Use bool for rx_mac_learn.
bonding: fix u64 division
rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
sfc: Use the correct maximum TX DMA ring size for SFC9100
Add Shradha Shah as the sfc driver maintainer.
net/vxlan: Share RX skb de-marking and checksum checks with ovs
tulip: cleanup by using ARRAY_SIZE()
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net/cxgb4: Don't retrieve stats during recovery
...
08 Jan, 2014
1 commit
-
Convert to the safer gpiod_* family of API functions.
Signed-off-by: Heikki Krogerus
Signed-off-by: Mika Westerberg
Tested-by: Stephen Warren
Acked-by: Johannes Berg
Signed-off-by: Linus Walleij
11 Dec, 2013
1 commit
-
Several files refer to an old address for the Free Software Foundation
in the file header comment. Resolve by replacing the address with
the URL so that we do not have to keep
updating the header comments anytime the address changes.CC: linux-wireless@vger.kernel.org
Signed-off-by: Jeff Kirsher
Signed-off-by: John W. Linville
28 Oct, 2013
5 commits
-
Including ACPI ID for Broadcom GPS receiver BCM4752.
Signed-off-by: Heikki Krogerus
Acked-by: Rhyland Klein
Reviewed-by: Mika Westerberg
Acked-by: Rafael J. Wysocki
Signed-off-by: Johannes Berg -
This will add the relevant values like the gpios and the
type in rfkill_gpio_platform_data to the rfkill_gpio_data
structure. It will allow those values to be easily picked
from DT and ACPI tables later.Signed-off-by: Heikki Krogerus
Acked-by: Rhyland Klein
Reviewed-by: Mika Westerberg
Signed-off-by: Johannes Berg -
This sets the direction of the gpio once when it's requested,
and uses the spinlock-safe gpio_set_state() to change the
state.Signed-off-by: Heikki Krogerus
Acked-by: Rhyland Klein
Reviewed-by: Mika Westerberg
Signed-off-by: Johannes Berg -
Use a simple flag to see the state of the clock, and make
the clock available even without a name. Also, get rid of
HAVE_CLK dependency.Signed-off-by: Heikki Krogerus
Acked-by: Rhyland Klein
Reviewed-by: Mika Westerberg
Signed-off-by: Johannes Berg -
And remove now unneeded resource freeing.
Signed-off-by: Heikki Krogerus
Acked-by: Rhyland Klein
Reviewed-by: Mika Westerberg
Signed-off-by: Johannes Berg
06 Sep, 2013
1 commit
-
Pull networking changes from David Miller:
"Noteworthy changes this time around:1) Multicast rejoin support for team driver, from Jiri Pirko.
2) Centralize and simplify TCP RTT measurement handling in order to
reduce the impact of bad RTO seeding from SYN/ACKs. Also, when
both timestamps and local RTT measurements are available prefer
the later because there are broken middleware devices which
scramble the timestamp.From Yuchung Cheng.
3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
memory consumed to queue up unsend user data. From Eric Dumazet.4) Add a "physical port ID" abstraction for network devices, from
Jiri Pirko.5) Add a "suppress" operation to influence fib_rules lookups, from
Stefan Tomanek.6) Add a networking development FAQ, from Paul Gortmaker.
7) Extend the information provided by tcp_probe and add ipv6 support,
from Daniel Borkmann.8) Use RCU locking more extensively in openvswitch data paths, from
Pravin B Shelar.9) Add SCTP support to openvswitch, from Joe Stringer.
10) Add EF10 chip support to SFC driver, from Ben Hutchings.
11) Add new SYNPROXY netfilter target, from Patrick McHardy.
12) Compute a rate approximation for sending in TCP sockets, and use
this to more intelligently coalesce TSO frames. Furthermore, add
a new packet scheduler which takes advantage of this estimate when
available. From Eric Dumazet.13) Allow AF_PACKET fanouts with random selection, from Daniel
Borkmann.14) Add ipv6 support to vxlan driver, from Cong Wang"
Resolved conflicts as per discussion.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
openvswitch: Fix alignment of struct sw_flow_key.
netfilter: Fix build errors with xt_socket.c
tcp: Add missing braces to do_tcp_setsockopt
caif: Add missing braces to multiline if in cfctrl_linkup_request
bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
vxlan: Fix kernel panic on device delete.
net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
icplus: Use netif_running to determine device state
ethernet/arc/arc_emac: Fix huge delays in large file copies
tuntap: orphan frags before trying to set tx timestamp
tuntap: purge socket error queue on detach
qlcnic: use standard NAPI weights
ipv6:introduce function to find route for redirect
bnx2x: VF RSS support - VF side
bnx2x: VF RSS support - PF side
vxlan: Notify drivers for listening UDP port changes
net: usbnet: update addr_assign_type if appropriate
driver/net: enic: update enic maintainers and driver
driver/net: enic: Exposing symbols for Cisco's low latency driver
...
16 Aug, 2013
1 commit
-
Function regulator_enable() may return an error that has to be checked.
This patch changes function rfkill_regulator_set_block() so that it checks
for the return code. Also, rfkill_data->reg_enabled is set to 'true' only
if there is no error.This fixes the following compilation warning:
net/rfkill/rfkill-regulator.c:43:20: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Luis Henriques
Signed-off-by: Johannes Berg
26 Jul, 2013
1 commit
-
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead. This converts the rfkill class code to use the
correct field.Cc: John W. Linville
Reviewed-by: Johannes Berg
Signed-off-by: Greg Kroah-Hartman
23 Apr, 2013
1 commit
22 Apr, 2013
1 commit
-
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.Signed-off-by: Wei Yongjun
[fix some indentation on the way]
Signed-off-by: Johannes Berg
12 Apr, 2013
1 commit
-
And return the proper string for it.
Acked-by: Johannes Berg
Acked-by: Marcel Holtmann
Signed-off-by: Samuel Ortiz
06 Mar, 2013
1 commit
-
'rfkill_regulator_ops' is used only in this file. Hence make it static.
Silences the following warning:
net/rfkill/rfkill-regulator.c:54:19: warning:
symbol 'rfkill_regulator_ops' was not declared. Should it be static?Signed-off-by: Sachin Kamat
Signed-off-by: Johannes Berg
29 Dec, 2012
1 commit
-
There's no need to test whether a (delayed) work item in pending
before queueing, flushing or cancelling it. Most uses are unnecessary
and quite a few of them are buggy.Remove unnecessary pending tests from rfkill. Only compile
tested.Signed-off-by: Tejun Heo
Acked-by: Johannes Berg
Cc: "John W. Linville"
Cc: linux-wireless@vger.kernel.org
14 Dec, 2012
1 commit
-
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
07 Dec, 2012
1 commit
-
CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.Signed-off-by: Bill Pemberton
Cc: Johannes Berg
Signed-off-by: Greg Kroah-Hartman
Signed-off-by: John W. Linville
29 Oct, 2012
1 commit
-
Sync up with Linus' tree to be able to apply Cesar's patch
against newer version of the code.Signed-off-by: Jiri Kosina
25 Oct, 2012
1 commit
-
Signed-off-by: Alan Cox
Signed-off-by: Jiri Kosina
03 Oct, 2012
1 commit
-
Pull networking changes from David Miller:
1) GRE now works over ipv6, from Dmitry Kozlov.
2) Make SCTP more network namespace aware, from Eric Biederman.
3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.
4) Make openvswitch network namespace aware, from Pravin B Shelar.
5) IPV6 NAT implementation, from Patrick McHardy.
6) Server side support for TCP Fast Open, from Jerry Chu and others.
7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
Borkmann.8) Increate the loopback default MTU to 64K, from Eric Dumazet.
9) Use a per-task rather than per-socket page fragment allocator for
outgoing networking traffic. This benefits processes that have very
many mostly idle sockets, which is quite common.From Eric Dumazet.
10) Use up to 32K for page fragment allocations, with fallbacks to
smaller sizes when higher order page allocations fail. Benefits are
a) less segments for driver to process b) less calls to page
allocator c) less waste of space.From Eric Dumazet.
11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.
12) VXLAN device driver, one way to handle VLAN issues such as the
limitation of 4096 VLAN IDs yet still have some level of isolation.
From Stephen Hemminger.13) As usual there is a large boatload of driver changes, with the scale
perhaps tilted towards the wireless side this time around.Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
hyperv: Add buffer for extended info after the RNDIS response message.
hyperv: Report actual status in receive completion packet
hyperv: Remove extra allocated space for recv_pkt_list elements
hyperv: Fix page buffer handling in rndis_filter_send_request()
hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
hyperv: Fix the max_xfer_size in RNDIS initialization
vxlan: put UDP socket in correct namespace
vxlan: Depend on CONFIG_INET
sfc: Fix the reported priorities of different filter types
sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
sfc: Fix loopback self-test with separate_tx_channels=1
sfc: Fix MCDI structure field lookup
sfc: Add parentheses around use of bitfield macro arguments
sfc: Fix null function pointer in efx_sriov_channel_type
vxlan: virtual extensible lan
igmp: export symbol ip_mc_leave_group
netlink: add attributes to fdb interface
tg3: unconditionally select HWMON support when tg3 is enabled.
Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
gre: fix sparse warning
...
24 Sep, 2012
1 commit
-
Prevent unnecessary rfkill event generation when the state has
not actually changed. These events have to be delivered to
relevant userspace processes, causing these processes to wake
up and do something while they could as well have slept. This
obviously results in more CPU usage, longer time-to-sleep-again
and therefore higher power consumption.Signed-off-by: Vitaly Wool
Signed-off-by: Mykyta Iziumtsev
Signed-off-by: Johannes Berg
22 Aug, 2012
1 commit
-
This reverts commit 2e48928d8a0f38c1b5c81eb3f1294de8a6382c68.
Those functions are needed and should not be removed, or
there is no way to set the rfkill led trigger name.Signed-off-by: AceLan Kao
Signed-off-by: Johannes Berg
14 Aug, 2012
1 commit
-
Convert delayed_work users doing cancel_delayed_work() followed by
queue_delayed_work() to mod_delayed_work().Most conversions are straight-forward. Ones worth mentioning are,
* drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always
use mod_delayed_work() and cancel loop in
edac_mc_reset_delay_period() is dropped.* drivers/platform/x86/thinkpad_acpi.c: No need to remember whether
watchdog is active or not. @fan_watchdog_active and related code
dropped.* drivers/power/charger-manager.c: Seemingly a lot of
delayed_work_pending() abuse going on here.
[delayed_]work_pending() are unsynchronized and racy when used like
this. I converted one instance in fullbatt_handler(). Please
conver the rest so that it invokes workqueue APIs for the intended
target state rather than trying to game work item pending state
transitions. e.g. if timer should be modified - call
mod_delayed_work(), canceled - call cancel_delayed_work[_sync]().* drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling()
simplified. Note that round_jiffies() calls in this function are
meaningless. round_jiffies() work on absolute jiffies not delta
delay used by delayed_work.v2: Tomi pointed out that __cancel_delayed_work() users can't be
safely converted to mod_delayed_work(). They could be calling it
from irq context and if that happens while delayed_work_timer_fn()
is running, it could deadlock. __cancel_delayed_work() users are
dropped.Signed-off-by: Tejun Heo
Acked-by: Henrique de Moraes Holschuh
Acked-by: Dmitry Torokhov
Acked-by: Anton Vorontsov
Acked-by: David Howells
Cc: Tomi Valkeinen
Cc: Jens Axboe
Cc: Jiri Kosina
Cc: Doug Thompson
Cc: David Airlie
Cc: Roland Dreier
Cc: "John W. Linville"
Cc: Zhang Rui
Cc: Len Brown
Cc: "J. Bruce Fields"
Cc: Johannes Berg
07 Jun, 2012
1 commit
-
__rfkill_switch_all() switches the state of devices of a given type; however,
it does not switch devices of all type (RFKILL_TYPE_ALL). As a result, it
ignores the keycode "KEY_RFKILL" from another module, i.e. eeepc-wmi.This fix is to make __rfkill_switch_all() to be able to switch not only
devices of a given type but also all devices.Signed-off-by: Alex Hung
Signed-off-by: John W. Linville
12 Mar, 2012
1 commit
-
For files that are actively using linux/device.h, make sure
that they call it out. This will allow us to clean up some
of the implicit uses of linux/device.h within include/*
without introducing build regressions.Yes, this was created by "cheating" -- i.e. the headers were
cleaned up, and then the fallout was found and fixed, and then
the two commits were reordered. This ensures we don't introduce
build regressions into the git history.Signed-off-by: Paul Gortmaker
