21 Sep, 2007
1 commit
-
Update netfilter list addresses and an old email address of myself.
Signed-off-by: Patrick McHardy
Signed-off-by: David S. Miller
31 Aug, 2007
3 commits
-
MAINTAINERS, order NETERION alphabetically
Signed-off-by: Jiri Slaby
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Drop the URL for DCO (URL is invalid). Also, point to SubmittingPatches
for the current DCO.Signed-off-by: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The IOC3 is a multifunction device but not in sense of the PCI
specification. Currently its ethernet and serial functionality are
supported by two separate drivers authored and maintained by different
people, so MAINTAINERS should reflect that.Cc: Patrick Gefre
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
27 Aug, 2007
1 commit
-
Signed-off-by: James Morris
Acked-by: Paul Moore
Signed-off-by: David S. Miller
24 Aug, 2007
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: fix bad error path in conversion routines
9p: remove deprecated v9fs_fid_lookup_remove()
9p: update maintainers and documentation
9p: fix use after free
23 Aug, 2007
2 commits
-
Updates to the MAINTAINERS file and documentation for 9p to point to the
swik wiki versus the outdated sf.net page. Also updated some email addresses
and added pointers to papers which better describe the implementation and
application of the Linux 9p client.Signed-off-by: Eric Van Hensbergen
-
Fix up the maintainers info in the tpm drivers. Kylene will be out for
some time, so copying the sourceforge list is the best way to get some
attention.Cc: Marcel Selhorst
Cc: Kylene Jo Hall
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
19 Aug, 2007
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Check return code on failed alloc
[CIFS] Update CIFS project web site
[CIFS] Fix hang in find_writable_file
14 Aug, 2007
2 commits
-
Add 3c59x maintainer.
Signed-off-by: Steffen Klassert
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
Signed-off-by: Steve French
12 Aug, 2007
2 commits
-
* 'async-tx-fixes-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop:
async_tx: update MAINTAINERS for async_tx and iop-adma -
Signed-off-by: Gabriel Craciunescu
Cc: David Woodhouse
Cc: Al Viro
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
10 Aug, 2007
1 commit
-
Also, rename the dma engine entry since it is now a generic offload engine
subsystem, not just memcpy.Signed-off-by: Dan Williams
Signed-off-by: Shannon Nelson
02 Aug, 2007
1 commit
-
Make it more clear to users what kinds of hardware USBHID handles,
so that they can send reports and queries properly.Signed-off-by: Jiri Kosina
01 Aug, 2007
3 commits
-
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits)
[WATCHDOG] Fix pcwd_init_module crash
[WATCHDOG] ICH9 support for iTCO_wdt
[WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges
[WATCHDOG] 631xESB/632xESB support for iTCO_wdt
[WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY
[WATCHDOG] Return value of nonseekable_open
[WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation
[WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed
[WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature
[WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting
[WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support
[WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl
[WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value
[WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open
[WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support
[WATCHDOG] mv64x60_wdt: Get register address from platform data
[WATCHDOG] mv64x60_wdt: set up platform_device in platform code
[WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt
[WATCHDOG] s3c2410_wdt: fixup after arch include moves
[WATCHDOG] git-watchdog-typo
... -
The arm26 port has been in a state where it was far from even compiling
for quite some time.Ian Molton agreed with the removal.
Signed-off-by: Adrian Bunk
Cc: Ian Molton
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Make Bruce Fields (co-)maintainer of kNFSDd
Signed-off-by: Neil Brown
Cc: "J. Bruce Fields"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
31 Jul, 2007
1 commit
-
Remove Val Henson as tulip maintainer and let her roam free, FREE!
Signed-off-by: Val Henson
Signed-off-by: Jeff Garzik
27 Jul, 2007
1 commit
-
Signed-off-by: Christoph Lameter
Acked-by: Pekka Enberg
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
24 Jul, 2007
1 commit
-
This patch implements the driver necessary use the Analog Devices
Blackfin processor's on-chip watchdog controller, supports
BF53[123]/BF53[467]/BF54[2489]/BF561.Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
Signed-off-by: Wim Van Sebroeck
23 Jul, 2007
1 commit
-
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits)
[ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410
[ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers
[ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h
[ARM] 4521/2: S3C: Reorganise VA mapping headers
[ARM] 4520/1: S3C: Remove old VA values from static map
[ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h
[ARM] 4518/1: S3C: Rename watchdog configuration options
[ARM] 4517/1: S3C: Fix debug macros for ARM926 output
[ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926
[ARM] 4515/1: S3C: Move uncompress code to plat-s3c
[ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART
[ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT
[ARM] 4512/1: S3C: rename the debug macros for per-cpu updates
[ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support
[ARM] 4510/1: S3C: split debug-macro support into plat-s3c
[ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c
[ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c
[ARM] 4461/1: MXC platform and i.MX31ADS core support
[ARM] 4507/1: pxa2xx clock_event_device
[ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later
...
22 Jul, 2007
1 commit
21 Jul, 2007
2 commits
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
sdhci: make sure to clear the error interrupt
mmc: at91_mci: wakeup on card insertion (or removal)
mmc: add maintainer for at91 -
Nicolas Ferre has taken it upon himself to look after the AT91
MMC host driver.Signed-off-by: Pierre Ossman
20 Jul, 2007
9 commits
-
Updating email adress in MAINTAINER file.
Signed-off-by: Kristoffer Ericson
Signed-off-by: Russell King -
MAINTAINERS entry for amd5536udc driver.
Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)
i2c: Delete the i2c-isa pseudo bus driver
hwmon: refuse to load abituguru driver on non-Abit boards
hwmon: fix Abit Uguru3 driver detection on some motherboards
hwmon/w83627ehf: Be quiet when no chip is found
hwmon/w83627ehf: No need to initialize fan_min
hwmon/w83627ehf: Export the thermal sensor types
hwmon/w83627ehf: Enable VBAT monitoring
hwmon/w83627ehf: Add support for the VID inputs
hwmon/w83627ehf: Fix timing issues
hwmon/w83627ehf: Add error messages for two error cases
hwmon/w83627ehf: Convert to a platform driver
hwmon/w83627ehf: Update the Kconfig entry
make coretemp_device_remove() static
hwmon: Add LM93 support
hwmon: Improve the pwmN_enable documentation
hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
hwmon: Add support for newer uGuru's
hwmon/f71805f: Add temperature-tracking fan control mode
hwmon/w83627ehf: Preserve speed reading when changing fan min
hwmon: fix detection of abituguru volt inputs
...Manual fixup of trivial conflict in MAINTAINERS file
-
Add documentation for the new SMSC DME1737 driver.
Signed-off-by: Juerg Haefliger
Signed-off-by: Jean Delvare -
Mark M. Hoffman is taking over for Jean Delvare as maintainer of the hwmon
subsystem. He is also the author/maintainer for several existing drivers.Signed-off-by: Jean Delvare
Signed-off-by: Mark M. Hoffman -
Update maintainer information on edac components
Signed-off-by: Doug Thompson
Cc: Greg KH
Cc: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Added new maintainers for the new EDAC drivers.
Signed-off-by: Douglas Thompson
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Update the MAINTAINERS file: Thomas Gleixner has been the de-facto
maintainer of POSIX timers and clocks for quite some time.Signed-off-by: Ingo Molnar
Cc: Thomas Gleixner
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
I guess it is time to clarify that suspend and hibernation are separate
things, and add Rafael as a maintainer. Plus, people blame us for suspend
problems, anyway, I guess it is fair to mark us as suspend maintainers,
too.Signed-off-by: Pavel Machek
Acked-by: Rafael J. Wysocki"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
19 Jul, 2007
3 commits
-
This patch implements the driver necessary use the Analog Devices
Blackfin processor's on-chip ethernet MAC controller.[try#2]
- add timeout control
- kill dma_config_reg bitfields
- some trivial cleanup[try#3]
- add endianess check
- add DRV_NAME, DRV_VERSION... driver information string
- add some comments for silicon anomaly and dma API confusion
- some code trivial cleanup[try#4]
- add Blackfin latest GPIO pin mux opertion with Michael Hennerich's
help and Dan's review
- rewrite the DMA descriptor list operation in a more readable way
by Joe's review[try#5]
- cleanup some coding style by Joe's review.[try#6]
- 1.1 version fix a bug when set up multicast list pointed by Mr. yoshfuji
- rearrange the desc_list_free function.Signed-off-by: Michael Hennerich
Signed-off-by: Bryan Wu
Cc: Michael Buesch
Cc: Mike Frysinger
Cc: Jeff Garzik
Cc: Christoph Hellwig
Cc: Dan Williams
Cc: Joe Perches
Cc: YOSHIFUJI Hideaki
Signed-off-by: Andrew Morton
Signed-off-by: Jeff Garzik -
Document the existence of a published git tree for the x86 setup code.
Signed-off-by: H. Peter Anvin
-
* 'upstream' of git://git.infradead.org/~dedekind/ubi-2.6: (28 commits)
UBI: fix compile warning
UBI: fix error handling in erase worker
UBI: fix comments
UBI: remove unneeded error checks
UBI: cleanup usage of try_module_get
UBI: fix overflow bug
UBI: bugfix in max_sqnum calculation
UBI: bugfix in sqnum calculation
UBI: fix signed-unsigned multiplication
UBI: fix bug in atomic_leb_change()
UBI: fix message
UBI: fix debugging stuff
UBI: bugfix in error path
UBI: use is_power_of_2()
UBI: fix freeing ubi->vtbl while unloading
UBI: fix MAINTAINERS
UBI: bugfix in ubi_leb_change()
UBI: kill homegrown endian macros
UBI: cleanup ioctl handling
UBI: error path bugfix
...
18 Jul, 2007
2 commits
-
This is a reimplementation of the zs driver for the serial subsystem. Any
resemblance to the old driver is purely coincidential. ;-) I do hope I got
the handling of modem lines right -- better do not tackle me about the
issue unless you feel too good...Any users of the old driver: please note the numbers of the serial lines
have now been swapped, i.e. ttyS0 ttyS1 and ttyS2 ttyS3. It has
to do with the modem lines mentioned above; basically the port A in a given
chip has to be initialised before the port B if you want to use the latter
as the serial console (which is usually the case), as operations on modem
lines of the serial line associated with the port B access both ports (see
the comment at the top of the driver for the details of wiring used).
Please update your scripts.This is also the reason each SCC now requests an IRQ once only (as seen in
"/proc/interrupts") -- the handler takes care of both ports at once as the
line associated with the port B has to take status update interrupts from
both ports (and yet the line of the port A takes its own for itself too).
The old driver never got it right...Signed-off-by: Maciej W. Rozycki
Cc: Ralf Baechle
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Fix UBI git tree URL.
Signed-off-by: Artem Bityutskiy
17 Jul, 2007
1 commit
-
Signed-off-by: Jens Axboe
