15 Jun, 2009
1 commit
-
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
trivial: remove the trivial patch monkey's name from SubmittingPatches
trivial: Fix a typo in comment of addrconf_dad_start()
trivial: usb: fix missing space typo in doc
trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
trivial: Remove the hyphen from git commands
trivial: fix ETIMEOUT -> ETIMEDOUT typos
trivial: Kconfig: .ko is normally not included in module names
trivial: SubmittingPatches: fix typo
trivial: Documentation/dell_rbu.txt: fix typos
trivial: Fix Pavel's address in MAINTAINERS
trivial: ftrace:fix description of trace directory
trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
trivial: input/misc: Fix typo in Kconfig
trivial: fix grammo in bus_for_each_dev() kerneldoc
trivial: rbtree.txt: fix rb_entry() parameters in sample code
trivial: spelling fix in ppc code comments
trivial: fix typo in bio_alloc kernel doc
trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
trivial: Miscellaneous documentation typo fixes
trivial: fix typo milisecond/millisecond for documentation and source comments.
...
13 Jun, 2009
2 commits
-
Remove the ->suspend_late() and ->resume_early() callbacks
from struct bus_type V2. These callbacks are legacy stuff
at this point and since there seem to be no in-tree users
we may as well remove them. New users should use dev_pm_ops.Signed-off-by: Magnus Damm
Acked-by: Pavel Machek
Acked-by: Greg Kroah-Hartman
Signed-off-by: Rafael J. Wysocki -
Fix various typos in documentation txts.
Signed-off-by: Matt LaPlante
Signed-off-by: Jiri Kosina
17 Oct, 2008
1 commit
-
As pm_trace uses the system's hardware clock to save its magic value,
users of that option should be warned that using this debug option will
result in an incorrect system time after resume.Signed-off-by: Frans Pop
Acked-by: Pavel Machek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
14 Oct, 2008
1 commit
-
This improves the machine level API in order to configure
regulator constraints and consumers as platform data and removes the
old string based API that required several calls to set up each regulator.The intention is to create a struct regulator_init_data, populate
it's fields with constraints, consumers devices, etc and then register
the regulator device from board.c in the standard Linux way.e.g. regulator LDO2 (supplying codec and sim) platform data.
/* regulator LDO2 consumer devices */
static struct regulator_consumer_supply ldo2_consumers[] = {
{
.dev = &platform_audio_device.dev,
.supply = "codec_avdd",
},
{
.dev = &platform_sim_device.dev,
.supply = "sim_vcc",
}
};/* regulator LDO2 constraints */
static struct regulator_init_data ldo2_data = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
.consumer_supplies = ldo2_consumers,
};/* machine regulator devices with thier consumers and constraints */
static struct platform_device wm8350_regulator_devices[] = {
{
.name = "wm8350-regulator",
.id = WM8350_LDO_2,
.dev = {
.platform_data = &ldo2_data,
},
},
};Changes in detail:-
o Removed all const char* regulator config functions in machine API.
o Created new struct regulator_init_data to contain regulator
machine configuration constraints and consmuers.
o Changed set_supply(), set_machine_constraints(),
set_consumer_device_supply() to remove their string identifier
parameters. Also made them static and moved functions nearer top of
core.c.
o Removed no longer used inline func to_rdev()
o Added regulator_get_init_drvdata() to retrieve init data.
o Added struct device* as parameter to regulator_register().
o Changed my email address.Signed-off-by: Eric Miao
Signed-off-by: Mark Brown
Signed-off-by: Liam Girdwood
06 Aug, 2008
1 commit
-
A documentation cleanup patch. With a minor tweak to clarify units for
kbs.[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: mark gross
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
02 Aug, 2008
1 commit
-
* 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: TI bq24022 Li-Ion Charger driver
regulator: maintainers - add maintainers for regulator framework.
regulator: documentation - ABI
regulator: documentation - machine
regulator: documentation - regulator driver
regulator: documentation - consumer interface
regulator: documentation - overview
regulator: core kbuild files
regulator: regulator test harness
regulator: add support for fixed regulators.
regulator: regulator framework core
regulator: fixed regulator interface
regulator: machine driver interface
regulator: regulator driver interface
regulator: consumer device interface
30 Jul, 2008
5 commits
-
This adds documenation describing the regulator machine interface.
Signed-off-by: Liam Girdwood
-
This adds documentation describing the regulator driver interface.
Signed-off-by: Liam Girdwood
-
This adds documentation describing the consumer device interface.
Signed-off-by: Liam Girdwood
-
This adds overview documentation describing the regulator framework and
nomenclature used in the interface specific documentation and code.Signed-off-by: Liam Girdwood
-
Conflicts:
drivers/power/Kconfig
drivers/power/Makefile
25 Jul, 2008
1 commit
-
Remove some obsolete PM documentation.
The majority of contents of Documentation/power/pm.txt are
outdated. Remove the outdated parts of this file and move the rest
to Documentation/power/apm-acpi.txt . Update the index in
Documentation/power/ as appropriate.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Acked-by: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
13 May, 2008
1 commit
-
This adds PROP_CHARGE_COUNTER to the power supply class (documenting it
as well). The OLPC battery driver uses this for spitting out its ACR
values (in uAh). We have some rounding errors (the data sheet claims
416.7, the math actually works out to 416.666667, so we're forced to
choose between overflows or precision loss. I chose precision loss,
and stuck w/ data sheet values), but I don't think anyone will care
that much.Signed-off-by: Andres Salomon
Signed-off-by: Anton Vorontsov
20 Apr, 2008
1 commit
-
Modify the PM core to protect its data structures, specifically the
dpm_active list, from being corrupted if a child of the currently
suspending device is registered concurrently with its ->suspend()
callback. In that case, since the new device (the child) is added
to dpm_active after its parent, the PM core will attempt to
suspend it after the parent, which is wrong.Introduce a new member of struct dev_pm_info, called 'sleeping',
and use it to check if the parent of the device being added to
dpm_active has been suspended, in which case the device registration
fails. Also, use 'sleeping' for checking if the ordering of devices
on dpm_active is correct.Introduce variable 'all_sleeping' that will be set to 'true' once all
devices have been suspended and make new device registrations fail
until 'all_sleeping' is reset to 'false', in order to avoid having
unsuspended devices around while the system is going into a sleep state.Remove pm_sleep_rwsem which is not necessary any more.
Special thanks to Alan Stern for discussions and suggestions that
lead to the creation of this patch.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Signed-off-by: Greg Kroah-Hartman
13 Mar, 2008
1 commit
-
Move 00-INDEX entries to power/00-INDEX (and add entry for
pm_qos_interface.txt).Update references to moved filenames.
Fix some trailing whitespace.
Signed-off-by: Randy Dunlap
Signed-off-by: Len Brown
24 Feb, 2008
1 commit
-
During the last step of hibernation in the "platform" mode (with the
help of ACPI) we use the suspend code, including the devices'
->suspend() methods, to prepare the system for entering the ACPI S4
system sleep state.But at least for some devices the operations performed by the
->suspend() callback in that case must be different from its operations
during regular suspend.For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and
pass it to the device drivers' ->suspend() methods during the last phase
of hibernation, so that they can distinguish this case and handle it as
appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a
special way and need to handle PM_EVENT_HIBERNATE in the same way.These changes are necessary to fix a hibernation regression related
to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488).Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Tested-by: Jeff Chua
Signed-off-by: Linus Torvalds
07 Feb, 2008
1 commit
-
Signed-off-by: Pavel Machek
Acked-by: Rafael J. Wysocki
Signed-off-by: Len Brown
02 Feb, 2008
8 commits
-
The /sys/devices/.../power/state files have been gone for a while
now, but I just noticed some documentation that still refers to
them. (Fortunately described as DEPRECATED and WILL REMOVE).Time to remove that obsolete documentation too ...
Signed-off-by: David Brownell
Acked-by: Pavel Machek
Signed-off-by: Rafael J. Wysocki
Signed-off-by: Len Brown -
Update the suspend/hibernation debugging and testing documentation to describe
the newly introduced testing facilities.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Signed-off-by: Len Brown -
Add PM_RESTORE_PREPARE and PM_POST_RESTORE notifiers to the PM core, to be used
in analogy with the existing PM_HIBERNATION_PREPARE and PM_POST_HIBERNATION
notifiers.Signed-off-by: Alan Stern
Acked-by: Pavel Machek
Signed-off-by: "Rafael J. Wysocki"
Signed-off-by: Len Brown -
Move the definitions of hibernation ioctls to a separate header file in
include/linux, which can be exported to the user space.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Signed-off-by: Len Brown -
Three ioctl numbers belonging to the hibernation userland interface,
SNAPSHOT_ATOMIC_SNAPSHOT, SNAPSHOT_AVAIL_SWAP, SNAPSHOT_GET_SWAP_PAGE,
are defined in a wrong way (eg. not portable). Provide new ioctl numbers for
these ioctls and mark the existing ones as deprecated.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Signed-off-by: Len Brown -
Mark the SNAPSHOT_SET_SWAP_FILE ioctl belonging to the hibernation userland
interface as deprecated.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Signed-off-by: Len Brown -
Modify the hibernation userland interface by adding two new ioctls to it,
SNAPSHOT_PLATFORM_SUPPORT and SNAPSHOT_POWER_OFF, that can be used,
respectively, to switch the hibernation platform support on/off and to make the
kernel transition the system to the hibernation state (eg. ACPI S4) using the
platform (eg. ACPI) driver.These ioctls are intended to replace the misdesigned SNAPSHOT_PMOPS ioctl,
which from now is regarded as obsolete and will be removed in the future.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Signed-off-by: Len Brown -
Add a new ioctl, SNAPSHOT_GET_IMAGE_SIZE, returning the size of the (just
created) hibernation image, to the hibernation userland interface.This ioctl is necessary so that the userland utilities using the interface need
not access the hibernation image header, owned by the kernel, in order to obtain
the size of the image.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Signed-off-by: Len Brown
20 Oct, 2007
1 commit
-
Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.Signed-off-by: Matt LaPlante
Acked-by: Randy Dunlap
Signed-off-by: Adrian Bunk
19 Oct, 2007
4 commits
-
Currently, there's a CONFIG_DISABLE_CONSOLE_SUSPEND that allows one to stop
the serial console from being suspended when the rest of the machine goes
to sleep. This is incredibly useful for debugging power management-related
things; however, having it as a compile-time option has proved to be
incredibly inconvenient for us (OLPC). There are plenty of times that we
want serial console to not suspend, but for the most part we'd like serial
console to be suspended.This drops CONFIG_DISABLE_CONSOLE_SUSPEND, and replaces it with a kernel
boot parameter (no_console_suspend). By default, the serial console will
be suspended along with the rest of the system; by passing
'no_console_suspend' to the kernel during boot, serial console will remain
alive during suspend.For now, this is pretty serial console specific; further fixes could be
applied to make this work for things like netconsole.Signed-off-by: Andres Salomon
Acked-by: "Rafael J. Wysocki"
Acked-by: Pavel Machek
Cc: Nigel Cunningham
Cc: Russell King
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The freezer should not send signals to kernel threads, since that may lead to
subtle problems. In particular, commit
b74d0deb968e1f85942f17080eace015ce3c332c has changed recalc_sigpending_tsk()
so that it doesn't clear TIF_SIGPENDING. For this reason, if the freezer
continues to send fake signals to kernel threads and the freezing of kernel
threads fails, some of them may be running with TIF_SIGPENDING set forever.Accordingly, recalc_sigpending_tsk() shouldn't set the task's TIF_SIGPENDING
flag if TIF_FREEZE is set.Signed-off-by: Rafael J. Wysocki
Cc: Nigel Cunningham
Cc: Pavel Machek
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
One important reason to freeze tasks, which is that we don't want them to
allocate memory after freeing it for the hibernation image, has not been
documented. Fix it.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Acked-by: Nigel Cunningham
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The name of 'struct pm_ops' suggests that it is related to the power
management in general, but in fact it is only related to suspend. Moreover,
its name should indicate what this structure is used for, so it seems
reasonable to change it to 'struct platform_suspend_ops'. In that case, the
name of the global variable of this type used by the PM core and the names of
related functions should be changed accordingly.Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Cc: Len Brown
Cc: Greg KH
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Oct, 2007
2 commits
-
Add Documentation/power/00-INDEX
Signed-off-by: Rob Landley
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Ralf Baechle
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
22 Jul, 2007
1 commit
-
freezing-of-tasks.txt mentions firmware issues without mentioning the use
of the new notifier API to overcome them. Here's an update.Signed-off-by: Oliver Neukum
Acked-by: Rafael J. Wysocki
Acked-by: Nigel Cunningham
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
20 Jul, 2007
1 commit
-
Make it possible to register hibernation and suspend notifiers, so that
subsystems can perform hibernation-related or suspend-related operations that
should not be carried out by device drivers' .suspend() and .resume()
routines.[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Rafael J. Wysocki
Acked-by: Pavel Machek
Cc: Nigel Cunningham
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
18 Jul, 2007
1 commit
-
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves. This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.The patch causes all kernel threads to be nonfreezable by default (ie. to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE. It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear. Additionally, it updates documentation to
describe the freezing of tasks more accurately.[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki
Acked-by: Nigel Cunningham
Cc: Pavel Machek
Cc: Oleg Nesterov
Cc: Gautham R Shenoy
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
13 Jul, 2007
1 commit
-
This patch (as886) adds the controversial USB-persist facility,
allowing USB devices to persist across a power loss during system
suspend.The facility is controlled by a new Kconfig option (with appropriate
warnings about the potential dangers); when the option is off the
behavior will remain the same as it is now. But when the option is
on, people will be able to use suspend-to-disk and keep their USB
filesystems intact -- something particularly valuable for small
machines where the root filesystem is on a USB device!Signed-off-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman
12 Jul, 2007
1 commit
-
Remove pointless and never-called enable_wake() hook from pci_driver and
from documentation. Evidently this was introduced in the 2.4.6 kernel,
but there's no evidence it was ever called; and it was rarely implemented.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman
10 May, 2007
2 commits
-
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
sound: convert "sound" subdirectory to UTF-8
MAINTAINERS: Add cxacru website/mailing list
include files: convert "include" subdirectory to UTF-8
general: convert "kernel" subdirectory to UTF-8
documentation: convert the Documentation directory to UTF-8
Convert the toplevel files CREDITS and MAINTAINERS to UTF-8.
remove broken URLs from net drivers' output
Magic number prefix consistency change to Documentation/magic-number.txt
trivial: s/i_sem /i_mutex/
fix file specification in comments
drivers/base/platform.c: fix small typo in doc
misc doc and kconfig typos
Remove obsolete fat_cvf help text
Fix occurrences of "the the "
Fix minor typoes in kernel/module.c
Kconfig: Remove reference to external mqueue library
Kconfig: A couple of grammatical fixes in arch/i386/Kconfig
Correct comments in genrtc.c to refer to correct /proc file.
Fix more "deprecated" spellos.
Fix "deprecated" typoes.
...Fix trivial comment conflict in kernel/relay.c.
-
[ With Johannes Berg ]
Separate the hibernation (aka suspend to disk code) from the other suspend
code. In particular:* Remove the definitions related to hibernation from include/linux/pm.h
* Introduce struct hibernation_ops and a new hibernate() function to hibernate
the system, defined in include/linux/suspend.h
* Separate suspend code in kernel/power/main.c from hibernation-related code
in kernel/power/disk.c and kernel/power/user.c (with the help of
hibernation_ops)
* Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_opsSigned-off-by: Rafael J. Wysocki
Cc: Greg KH
Cc: Pavel Machek
Cc: Nigel Cunningham
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
