27 May, 2011
40 commits
-
The Blackfin arch, like the x86 arch, needs to adjust the PC manually
after a breakpoint is hit as normally this is handled by the remote gdb.
However, rather than starting another arch ifdef mess, create a common
GDB_ADJUSTS_BREAK_OFFSET define for any arch to opt-in via their kgdb.h.Signed-off-by: Mike Frysinger
Cc: Oleg Nesterov
Cc: Jason Wessel
Cc: Thomas Gleixner
Cc: Ingo Molnar
Cc: "H. Peter Anvin"
Acked-by: Paul Mundt
Acked-by: Dongdong Deng
Cc: Sergei Shtylyov
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
[akpm@linux-foundation.org: retain the code comments]
Signed-off-by: Wolfram Sang
Cc: Vladimir Zapolskiy
Cc: Alessandro Zummo
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Commit 51ba60c5 ("RTC: Cleanup rtc_class_ops->update_irq_enable()")
removed the only user of the update IRQ, so there is no need to manage it
any more.Signed-off-by: Lars-Peter Clausen
Cc: Thomas Gleixner
Cc: Alessandro Zummo
Cc: Marcelo Roberto Jimenez
Cc: John Stultz
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Signed-off-by: Rajeev Kumar
Signed-off-by: Viresh Kumar
Cc: Alessandro Zummo
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
The memory allocated using request_mem_region should be released using
release_mem_region, not release_region.The semantic patch that fixes part of this problem is as follows:
(http://coccinelle.lip6.fr/)//
@@
expression E1,E2,E3;
@@request_mem_region(E1,E2,E3)
...
?- release_region(E1,E2)
+ release_mem_region(E1,E2)
//[akpm@linux-foundation.org: use resource_size()]
Signed-off-by: Julia Lawall
Cc: Alessandro Zummo
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add basic support for ST m41t93 SPI RTCs. Tested with factory-new and
with "run-in" species with and without backup batteries.Signed-off-by: Nikolaus Voss
Cc: Alessandro Zummo
Cc: Grant Likely
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add support for the Micro Crystal RV3029-C2 RTC chips.
Signed-off-by: Heiko Schocher
Signed-off-by: Gregory Hermant
Cc: Wan ZongShun
Cc: Alessandro Zummo
Acked-by: Wolfram Sang
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Add support for EM Microelectronic EM3027 RTC chip.
Signed-off-by: Mike Rapoport
Cc: Alessandro Zummo
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
This adds a driver for the RTC devices in VIA and WonderMedia
Systems-on-Chip. Alarm, 1Hz interrupts, reading and setting time are
supported.Signed-off-by: Alexey Charkov
Cc: Lars-Peter Clausen
Cc: Alexey Charkov
Cc: Alessandro Zummo
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
spin_lock_irqsave() requires unsigned long.
Signed-off-by: KOSAKI Motohiro
Cc: Hirokazu Takata
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
alpha allmodconfig:
drivers/bcma/host_pci.c: In function 'bcma_host_pci_probe':
drivers/bcma/host_pci.c:102: error: implicit declaration of function 'kzalloc'
drivers/bcma/host_pci.c:102: warning: assignment makes pointer from integer without a castCc:
Cc: John W. Linville
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
alpha allmodconfig:
drivers/video/mb862xx/mb862xxfbdrv.c: In function 'mb862xxfb_ioctl':
drivers/video/mb862xx/mb862xxfbdrv.c:323: error: implicit declaration of function 'copy_to_user'
drivers/video/mb862xx/mb862xxfbdrv.c:327: error: implicit declaration of function 'copy_from_user'Cc: Paul Mundt
Cc: Anatolij Gustschin
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
gfs2: Drop __TIME__ usage
isdn/diva: Drop __TIME__ usage
atm: Drop __TIME__ usage
dlm: Drop __TIME__ usage
wan/pc300: Drop __TIME__ usage
parport: Drop __TIME__ usage
hdlcdrv: Drop __TIME__ usage
baycom: Drop __TIME__ usage
pmcraid: Drop __DATE__ usage
edac: Drop __DATE__ usage
rio: Drop __DATE__ usage
scsi/wd33c93: Drop __TIME__ usage
scsi/in2000: Drop __TIME__ usage
aacraid: Drop __TIME__ usage
media/cx231xx: Drop __TIME__ usage
media/radio-maxiradio: Drop __TIME__ usage
nozomi: Drop __TIME__ usage
cyclades: Drop __TIME__ usage -
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
gpio/via: rename VIA local config struct
basic_mmio_gpio: split into a gpio library and platform device
gpio: remove some legacy comments in build files
gpio: add trace events for setting direction and value
gpio/pca953x: Use handle_simple_irq instead of handle_edge_irq
gpiolib: export gpiochip_find
gpio: remove redundant Kconfig depends on GPIOLIB
basic_mmio_gpio: convert to non-__raw* accessors
basic_mmio_gpio: support direction registers
basic_mmio_gpio: support different input/output registers
basic_mmio_gpio: detect output method at probe time
basic_mmio_gpio: request register regions
basic_mmio_gpio: allow overriding number of gpio
basic_mmio_gpio: convert to platform_{get,set}_drvdata()
basic_mmio_gpio: remove runtime width/endianness evaluation -
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (57 commits)
regulator: Fix 88pm8607.c printk format warning
input: Add support for Qualcomm PMIC8XXX power key
input: Add Qualcomm pm8xxx keypad controller driver
mfd: Add omap-usbhs runtime PM support
mfd: Fix ASIC3 SD Host Controller Configuration size
mfd: Fix omap_usbhs_alloc_children error handling
mfd: Fix omap usbhs crash when rmmoding ehci or ohci
mfd: Add ASIC3 LED support
leds: Add ASIC3 LED support
mfd: Update twl4030-code maintainer e-mail address
mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp
mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0
mfd: Provide ab8500-core enumerators for chip cuts
mfd: Check twl4030-power remove script error condition after i2cwrite
mfd: Fix twl6030 irq definitions
mfd: Add phoenix lite (twl6025) support to twl6030
mfd: Avoid to use constraint name in 88pm860x regulator driver
mfd: Remove checking on max8925 regulator[0]
mfd: Remove unused parameter from 88pm860x API
mfd: Avoid to allocate 88pm860x static platform data
... -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/cma: Save PID of ID's owner
RDMA/cma: Add support for netlink statistics export
RDMA/cma: Pass QP type into rdma_create_id()
RDMA: Update exported headers list
RDMA/cma: Export enum cma_state in
RDMA/nes: Add a check for strict_strtoul()
RDMA/cxgb3: Don't post zero-byte read if endpoint is going away
RDMA/cxgb4: Use completion objects for event blocking
IB/srp: Fix integer -> pointer cast warnings
IB: Add devnode methods to cm_class and umad_class
IB/mad: Return EPROTONOSUPPORT when an RDMA device lacks the QP required
IB/uverbs: Add devnode method to set path/mode
RDMA/ucma: Add .nodename/.mode to tell userspace where to create device node
RDMA: Add netlink infrastructure
RDMA: Add error handling to ib_core_init() -
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6:
spi/amba-pl022: work in polling or interrupt mode if pl022_dma_probe fails
spi/spi_s3c24xx: Use spi_bitbang_stop instead of spi_unregister_master in s3c24xx_spi_remove
spi/spi_nuc900: Use spi_bitbang_stop instead of spi_unregister_master in nuc900_spi_remove
spi/spi_tegra: use spi_unregister_master() instead of spi_master_put()
spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path
spi: Use void pointers for data in simple SPI I/O operations
spi/pl022: use cpu_relax in the busy loop
spi/pl022: mark driver non-experimental
spi/pl022: timeout on polled transfer v2
spi/dw_spi: improve the interrupt mode with the batch ops
spi/dw_spi: change poll mode transfer from byte ops to batch ops
spi/dw_spi: remove the un-necessary flush()
spi/dw_spi: unify the low level read/write routines -
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits)
OMAP3: PM: Boot message is not an error, and not helpful, remove it
OMAP3: cpuidle: change the power domains modes determination logic
OMAP3: cpuidle: code rework for improved readability
OMAP3: cpuidle: re-organize the C-states data
OMAP3: clean-up mach specific cpuidle data structures
OMAP3 cpuidle: remove useless SDP specific timings
usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
usb: otg: OMAP4430: Fixing the omap4430_phy_init function
usb: musb: am35x: fix compile error when building am35x
usb: musb: OMAP4430: Power down the PHY during board init
omap: drop board-igep0030.c
omap: igep0020: add support for IGEP3
omap: igep0020: minor refactoring
omap: igep0020: name refactoring for future merge with IGEP3
omap: Remove support for omap2evm
arm: omap2plus: GPIO cleanup
omap: musb: introduce default board config
omap: move detection of NAND CS to common-board-devices
omap: use common initialization for PMIC i2c bus
omap: consolidate touch screen initialization among different boards
... -
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
xen: cleancache shim to Xen Transcendent Memory
ocfs2: add cleancache support
ext4: add cleancache support
btrfs: add cleancache support
ext3: add cleancache support
mm/fs: add hooks to support cleancache
mm: cleancache core ops functions and config
fs: add field to superblock to support cleancache
mm/fs: cleancache documentationFix up trivial conflict in fs/btrfs/extent_io.c due to includes
-
Fix printk format warning (seen on x86_64) and change to unsigned
output format:drivers/regulator/88pm8607.c:417: warning: format '%d' expects type 'int', but argument 3 has type 'resource_size_t'
Signed-off-by: Randy Dunlap
Acked-by: Mark Brown
Signed-off-by: Samuel Ortiz -
Add support for PMIC8XXX power key driven over dedicated
KYPD_PWR_N pin.Acked-by: Dmitry Torokhov
Signed-off-by: Trilok Soni
Signed-off-by: Anirudh Ghayal
Signed-off-by: Samuel Ortiz -
Add Qualcomm PMIC8XXX based keypad controller driver
supporting upto 18x8 matrix configuration.Acked-by: Dmitry Torokhov
Signed-off-by: Trilok Soni
Signed-off-by: Anirudh Ghayal
Signed-off-by: Samuel Ortiz -
The usbhs core driver does not enable/disable the interface and
functional clocks; These clocks are handled by hwmod and runtime pm,
hence insted of the clock enable/disable, the runtime pm APIS are
used. however,the port clocks and tll clocks are handled
by the usbhs core.Signed-off-by: Keshava Munegowda
Signed-off-by: Samuel Ortiz -
The size of the TC6380AF SD Host Controller Configuration area is 0x200 bytes (assuming registers are aligned on 32-bit boundaries), not 0x400 bytes. Source: Toshiba TC6380AF Specification sections 4.2 and 4.3.1
Signed-off-by: Paul Parsons
Signed-off-by: Samuel Ortiz -
1. Return proper error if omap_usbhs_alloc_child fails
2. In the case of goto err_ehci, we should call platform_device_unregister(ehci)
instead of platform_device_put(ehci) because we have already added the
platform device to device hierarchy.Signed-off-by: Axel Lin
Signed-off-by: Axel Lin
Tested-by: Keshava Munegowda
Acked-by: Felipe Balbi
Signed-off-by: Samuel Ortiz -
The disabling of clocks and freeing GPIO are changed
to fix the occurrence of the crash of rmmod of ehci and ohci
drivers. The GPIOs should be freed after the spin locks are
unlocked.Signed-off-by: Keshava Munegowda
Acked-by: Felipe Balbi
Cc: stable@kernel.org
Signed-off-by: Samuel Ortiz -
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
Signed-off-by: Paul Parsons
Signed-off-by: Samuel Ortiz -
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
Signed-off-by: Paul Parsons
Signed-off-by: Samuel Ortiz -
Signed-off-by: Peter Ujfalusi
Signed-off-by: Samuel Ortiz -
The bitmask for enabling the BatTemp pull-up was wrong and
is corrected. The name is also changed to be inline with
the AB8500 register descriptionSigned-off-by: Johan Palsson
Reviewed-by: Mattias Wallin
Signed-off-by: Linus Walleij
Signed-off-by: Samuel Ortiz -
In AB8500 3.0 the pull-up supplying the NTC must be manually activated.
Add enumerators to chip version detection logic.Signed-off-by: Kalle Komierowski
Reviewed-by: Johan Palsson
Reviewed-by: Daniel Willerud
Reviewed-by: Jonas Aberg
Signed-off-by: Linus Walleij
Signed-off-by: Samuel Ortiz -
Since functionality in MFD cells may need to be adjusted according to
chip revision, let's enumerate them and keep track of them.Signed-off-by: Linus Walleij
Signed-off-by: Samuel Ortiz -
Fixing the error condition check in twl4030 remove script function.
Due to some typo in commit ID: 11a441ce82d6ffecfd39b324024de0cd630b36c1Signed-off-by: Lesly A M
Signed-off-by: Samuel Ortiz -
The charger fault IRQs from the twl will in future patches be handled
by a seperate IRQ handler in the charger driver than the general charger
IRQ. Give them different IRQ numbers now to allow the charger driver to
be merged in the future.Signed-off-by: Graeme Gregory
Signed-off-by: Samuel Ortiz -
Phoenix Lite is based on the twl6030 family of PMICs. It has mostly the
same feature set of twl6030 but with small changes. The codec block has
also been removed. It also has a new charger block and new features in
its ADC block. VUSB handling also differs.Signed-off-by: Graeme Gregory
Reviewed-by: Mark Brown
Signed-off-by: Samuel Ortiz -
Avoid to use constraint name in regulator driver. So use regulator id is used
instead in platform driver.Signed-off-by: Haojian Zhuang
Cc: Liam Girdwood
Acked-by: Mark Brown
Signed-off-by: Samuel Ortiz -
Since regulator[0] is always checking in mfd driver, it results in
registration failure without regulator[0].Signed-off-by: Haojian Zhuang
Reviewed-by: Mark Brown
Signed-off-by: Samuel Ortiz -
i2c_client parameter isn't used in some functions. Just remove it.
Signed-off-by: Haojian Zhuang
Signed-off-by: Samuel Ortiz -
Maybe multiple PMIC devices are installed into one board. Static variable
can only make driver logic mess. So remove these variable, and use
platform data from platform driver instead.Signed-off-by: Haojian Zhuang
Signed-off-by: Samuel Ortiz -
Enable rtc function in 88pm860x PMIC.
Signed-off-by: Haojian Zhuang
Cc: Alessandro Zummo
Signed-off-by: Samuel Ortiz
