Eric Lee / smarc_mx8_debian

Download as
Browse Code ยป

Commit 26863f5c0be2f18d96ff6542c2d14a02166c1079

Authored by Eric Lee
1 parent 18844e733d
Exists in debian_bullseye_mx8mq

Fix broken links

Showing 31 changed files with 16 additions and 1289 deletions Side-by-side Diff

embedian/smarcimx8mp4g/01-eth.sh
View file @ 26863f5
1   -#!/bin/sh
2   -
3   -case $1 in
4   -
5   -"suspend")
6   - ;;
7   -"resume")
8   - if [ -d /sys/class/net/eth0 ]; then
9   - ifconfig eth0 down
10   - ifconfig eth0 up
11   - fi
12   - if [ -d /sys/class/net/eth1 ]; then
13   - ifconfig eth1 down
14   - ifconfig eth1 up
15   - fi
16   - ;;
17   -esac
embedian/smarcimx8mp4g/blacklist.conf
View file @ 26863f5
1   -blacklist evbug
embedian/smarcimx8mp4g/bluez5/files/audio.conf
View file @ 26863f5
1   -# This section contains options which are not specific to any
2   -# particular interface
3   -[General]
4   -Enable=Source,Sink,Media,Socket
embedian/smarcimx8mp4g/bluez5/files/main.conf
View file @ 26863f5
1   -[General]
2   -
3   -# Default adaper name
4   -# Defaults to 'BlueZ X.YZ'
5   -Name = Variscite
6   -
7   -# Default device class. Only the major and minor device class bits are
8   -# considered. Defaults to '0x000000'.
9   -Class = 0x000100
10   -
11   -# How long to stay in discoverable mode before going back to non-discoverable
12   -# The value is in seconds. Default is 180, i.e. 3 minutes.
13   -# 0 = disable timer, i.e. stay discoverable forever
14   -#DiscoverableTimeout = 0
15   -
16   -# How long to stay in pairable mode before going back to non-discoverable
17   -# The value is in seconds. Default is 0.
18   -# 0 = disable timer, i.e. stay pairable forever
19   -#PairableTimeout = 0
20   -
21   -# Automatic connection for bonded devices driven by platform/user events.
22   -# If a platform plugin uses this mechanism, automatic connections will be
23   -# enabled during the interval defined below. Initially, this feature
24   -# intends to be used to establish connections to ATT channels. Default is 60.
25   -#AutoConnectTimeout = 60
26   -
27   -# Use vendor id source (assigner), vendor, product and version information for
28   -# DID profile support. The values are separated by ":" and assigner, VID, PID
29   -# and version.
30   -# Possible vendor id source values: bluetooth, usb (defaults to usb)
31   -#DeviceID = bluetooth:1234:5678:abcd
32   -
33   -# Do reverse service discovery for previously unknown devices that connect to
34   -# us. This option is really only needed for qualification since the BITE tester
35   -# doesn't like us doing reverse SDP for some test cases (though there could in
36   -# theory be other useful purposes for this too). Defaults to 'true'.
37   -#ReverseServiceDiscovery = true
38   -
39   -# Enable name resolving after inquiry. Set it to 'false' if you don't need
40   -# remote devices name and want shorter discovery cycle. Defaults to 'true'.
41   -#NameResolving = true
42   -
43   -# Enable runtime persistency of debug link keys. Default is false which
44   -# makes debug link keys valid only for the duration of the connection
45   -# that they were created for.
46   -#DebugKeys = false
47   -
48   -# Restricts all controllers to the specified transport. Default value
49   -# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
50   -# Possible values: "dual", "bredr", "le"
51   -#ControllerMode = dual
52   -
53   -# Enables Multi Profile Specification support. This allows to specify if
54   -# system supports only Multiple Profiles Single Device (MPSD) configuration
55   -# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
56   -# Devices (MPMD) configurations.
57   -# Possible values: "off", "single", "multiple"
58   -#MultiProfile = off
59   -
60   -# Permanently enables the Fast Connectable setting for adapters that
61   -# support it. When enabled other devices can connect faster to us,
62   -# however the tradeoff is increased power consumptions. This feature
63   -# will fully work only on kernel version 4.1 and newer. Defaults to
64   -# 'false'.
65   -#FastConnectable = false
66   -
67   -#[Policy]
68   -#
69   -# The ReconnectUUIDs defines the set of remote services that should try
70   -# to be reconnected to in case of a link loss (link supervision
71   -# timeout). The policy plugin should contain a sane set of values by
72   -# default, but this list can be overridden here. By setting the list to
73   -# empty the reconnection feature gets disabled.
74   -#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb, 0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb
75   -
76   -# ReconnectAttempts define the number of attempts to reconnect after a link
77   -# lost. Setting the value to 0 disables reconnecting feature.
78   -#ReconnectAttempts=7
79   -
80   -# ReconnectIntervals define the set of intervals in seconds to use in between
81   -# attempts.
82   -# If the number of attempts defined in ReconnectAttempts is bigger than the
83   -# set of intervals the last interval is repeated until the last attempt.
84   -#ReconnectIntervals=1, 2, 4, 8, 16, 32, 64
85   -
86   -# AutoEnable defines option to enable all controllers when they are found.
87   -# This includes adapters present on start as well as adapters that are plugged
88   -# in later on. Defaults to 'false'.
89   -#AutoEnable=false
embedian/smarcimx8mp4g/bluez5/files/obex.service
View file @ 26863f5
1   -[Unit]
2   -Description=Bluetooth OBEX service
3   -
4   -[Service]
5   -Type=dbus
6   -BusName=org.bluez.obex
7   -Environment="DBUS_SESSION_BUS_ADDRESS=unix:path=/var/run/dbus/system_bus_socket"
8   -ExecStartPre=/bin/mkdir -p /tmp/bluetooth-inbox
9   -ExecStart=/usr/libexec/bluetooth/obexd -a -l -r /tmp/bluetooth-inbox
10   -
11   -[Install]
12   -Alias=dbus-org.bluez.obex.service
embedian/smarcimx8mp4g/bluez5/files/obexd.conf
View file @ 26863f5
1   -<!-- This configuration file specifies the required security policies
2   - for Obex core daemon to work. -->
3   -
4   -<!DOCTYPE busconfig PUBLIC "-//freedesktop/DTD D-BUS Configuration 1.0//EN"
5   - "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
6   -<busconfig>
7   - <policy user="root">
8   - <allow own="org.bluez.obex"/>
9   - <allow send_destination="org.bluez.obex"/>
10   - <allow send_interface="org.bluez.obex"/>
11   - </policy>
12   -</busconfig>
embedian/smarcimx8mp4g/imx-boot-tools/imx-boot/imx-mkimage-imx8m-soc.mak-add-smarc-imx8mp-support.patch
View file @ 26863f5
1   -From 7032ad5669be3ee54da01a864c9ea1d560f756e5 Mon Sep 17 00:00:00 2001
2   -From: Eric Lee <eric.lee@embedian.com>
3   -Date: Sun, 31 Oct 2021 00:31:53 +0800
4   -Subject: [PATCH] imx-mkimage: imx8m: soc.mak: Add support for Embedian
5   -
6   ----
7   - iMX8M/soc.mak | 4 ++--
8   - 1 file changed, 2 insertions(+), 2 deletions(-)
9   -
10   -diff --git a/iMX8M/soc.mak b/iMX8M/soc.mak
11   -index 30ecefd..c362034 100644
12   ---- a/iMX8M/soc.mak
13   -+++ b/iMX8M/soc.mak
14   -@@ -137,9 +137,9 @@ u-boot-atf-tee.bin: u-boot.bin bl31.bin tee.bin
15   - clean:
16   - @rm -f $(MKIMG) u-boot-atf.bin u-boot-atf-tee.bin u-boot-spl-ddr.bin u-boot.itb u-boot.its u-boot-ddr3l.itb u-boot-ddr3l.its u-boot-spl-ddr3l.bin u-boot-ddr4.itb u-boot-ddr4.its u-boot-spl-ddr4.bin u-boot-ddr4-evk.itb u-boot-ivt.itb u-boot-ddr4-evk.its $(OUTIMG)
17   -
18   --dtbs = evk.dtb
19   -+dtbs = smarc.dtb
20   - $(dtbs):
21   -- ./$(DTB_PREPROC) $(PLAT)-evk.dtb $(dtbs)
22   -+ ./$(DTB_PREPROC) $(PLAT)-smarc.dtb $(dtbs)
23   -
24   - u-boot.itb: $(dtbs)
25   - ./$(PAD_IMAGE) tee.bin
26   ---
27   -2.17.1
embedian/smarcimx8mp4g/pulseaudio/default.pa
View file @ 26863f5
1   -#!/usr/bin/pulseaudio -nF
2   -#
3   -# This file is part of PulseAudio.
4   -#
5   -# PulseAudio is free software; you can redistribute it and/or modify it
6   -# under the terms of the GNU Lesser General Public License as published by
7   -# the Free Software Foundation; either version 2 of the License, or
8   -# (at your option) any later version.
9   -#
10   -# PulseAudio is distributed in the hope that it will be useful, but
11   -# WITHOUT ANY WARRANTY; without even the implied warranty of
12   -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13   -# General Public License for more details.
14   -#
15   -# You should have received a copy of the GNU Lesser General Public License
16   -# along with PulseAudio; if not, write to the Free Software Foundation,
17   -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
18   -
19   -# This startup script is used only if PulseAudio is started per-user
20   -# (i.e. not in system mode)
21   -
22   -.nofail
23   -
24   -### Load something into the sample cache
25   -#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
26   -#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
27   -#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
28   -#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
29   -
30   -.fail
31   -
32   -### Automatically restore the volume of streams and devices
33   -load-module module-device-restore
34   -load-module module-stream-restore
35   -load-module module-card-restore
36   -
37   -### Automatically augment property information from .desktop files
38   -### stored in /usr/share/application
39   -load-module module-augment-properties
40   -
41   -### Should be after module-*-restore but before module-*-detect
42   -load-module module-switch-on-port-available
43   -
44   -### Load audio drivers statically
45   -### (it's probably better to not load these drivers manually, but instead
46   -### use module-udev-detect -- see below -- for doing this automatically)
47   -load-module module-alsa-sink
48   -load-module module-alsa-source device=hw:0,0
49   -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
50   -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
51   -#load-module module-null-sink
52   -#load-module module-pipe-sink
53   -
54   -### Automatically load driver modules depending on the hardware available
55   -#.ifexists module-udev-detect.so
56   -#load-module module-udev-detect tsched=0
57   -#.else
58   -### Use the static hardware detection module (for systems that lack udev support)
59   -#load-module module-detect
60   -#.endif
61   -
62   -### Automatically connect sink and source if JACK server is present
63   -.ifexists module-jackdbus-detect.so
64   -.nofail
65   -load-module module-jackdbus-detect channels=2
66   -.fail
67   -.endif
68   -
69   -### Automatically load driver modules for Bluetooth hardware
70   -.ifexists module-bluetooth-policy.so
71   -load-module module-bluetooth-policy
72   -.endif
73   -
74   -.ifexists module-bluetooth-discover.so
75   -load-module module-bluetooth-discover
76   -.endif
77   -
78   -### Load several protocols
79   -.ifexists module-esound-protocol-unix.so
80   -load-module module-esound-protocol-unix
81   -.endif
82   -load-module module-native-protocol-unix
83   -
84   -### Network access (may be configured with paprefs, so leave this commented
85   -### here if you plan to use paprefs)
86   -#load-module module-esound-protocol-tcp
87   -#load-module module-native-protocol-tcp
88   -#load-module module-zeroconf-publish
89   -
90   -### Load the RTP receiver module (also configured via paprefs, see above)
91   -#load-module module-rtp-recv
92   -
93   -### Load the RTP sender module (also configured via paprefs, see above)
94   -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
95   -#load-module module-rtp-send source=rtp.monitor
96   -
97   -### Load additional modules from GConf settings. This can be configured with the paprefs tool.
98   -### Please keep in mind that the modules configured by paprefs might conflict with manually
99   -### loaded modules.
100   -.ifexists module-gconf.so
101   -.nofail
102   -load-module module-gconf
103   -.fail
104   -.endif
105   -
106   -### Automatically restore the default sink/source when changed by the user
107   -### during runtime
108   -### NOTE: This should be loaded as early as possible so that subsequent modules
109   -### that look up the default sink/source get the right value
110   -load-module module-default-device-restore
111   -
112   -### Automatically move streams to the default sink if the sink they are
113   -### connected to dies, similar for sources
114   -load-module module-rescue-streams
115   -
116   -### Make sure we always have a sink around, even if it is a null sink.
117   -load-module module-always-sink
118   -
119   -### Honour intended role device property
120   -load-module module-intended-roles
121   -
122   -### Automatically suspend sinks/sources that become idle for too long
123   -load-module module-suspend-on-idle
124   -
125   -### If autoexit on idle is enabled we want to make sure we only quit
126   -### when no local session needs us anymore.
127   -.ifexists module-console-kit.so
128   -load-module module-console-kit
129   -.endif
130   -.ifexists module-systemd-login.so
131   -load-module module-systemd-login
132   -.endif
133   -
134   -### Enable positioned event sounds
135   -load-module module-position-event-sounds
136   -
137   -### Cork music/video streams when a phone stream is active
138   -load-module module-role-cork
139   -
140   -### Modules to allow autoloading of filters (such as echo cancellation)
141   -### on demand. module-filter-heuristics tries to determine what filters
142   -### make sense, and module-filter-apply does the heavy-lifting of
143   -### loading modules and rerouting streams.
144   -load-module module-filter-heuristics
145   -load-module module-filter-apply
146   -
147   -### Load DBus protocol
148   -.ifexists module-dbus-protocol.so
149   -load-module module-dbus-protocol
150   -.endif
151   -
152   -# X11 modules should not be started from default.pa so that one daemon
153   -# can be shared by multiple sessions.
154   -
155   -### Load X11 bell module
156   -#load-module module-x11-bell sample=bell-windowing-system
157   -
158   -### Register ourselves in the X11 session manager
159   -#load-module module-x11-xsmp
160   -
161   -### Publish connection data in the X11 root window
162   -#.ifexists module-x11-publish.so
163   -#.nofail
164   -#load-module module-x11-publish
165   -#.fail
166   -#.endif
167   -
168   -### Make some devices default
169   -#set-default-sink output
170   -#set-default-source input
embedian/smarcimx8mp4g/pulseaudio/pulseaudio-bluetooth.conf
View file @ 26863f5
1   -<busconfig>
2   -
3   - <policy user="pulse">
4   - <allow send_destination="org.bluez"/>
5   - </policy>
6   -
7   -</busconfig>
embedian/smarcimx8mp4g/pulseaudio/pulseaudio.service
View file @ 26863f5
1   -[Unit]
2   -Description=PulseAudio system server
3   -
4   -[Service]
5   -Type=forking
6   -PIDFile=/var/run/pulse/pid
7   -ExecStart=/usr/bin/pulseaudio --system --disallow-exit --disable-shm --exit-idle-time=-1 --daemonize
8   -
9   -[Install]
10   -WantedBy=multi-user.target
embedian/smarcimx8mp4g/pulseaudio/system.pa
View file @ 26863f5
1   -#!/usr/bin/pulseaudio -nF
2   -#
3   -# This file is part of PulseAudio.
4   -#
5   -# PulseAudio is free software; you can redistribute it and/or modify it
6   -# under the terms of the GNU Lesser General Public License as published by
7   -# the Free Software Foundation; either version 2 of the License, or
8   -# (at your option) any later version.
9   -#
10   -# PulseAudio is distributed in the hope that it will be useful, but
11   -# WITHOUT ANY WARRANTY; without even the implied warranty of
12   -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13   -# General Public License for more details.
14   -#
15   -# You should have received a copy of the GNU Lesser General Public License
16   -# along with PulseAudio; if not, write to the Free Software Foundation,
17   -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
18   -
19   -# This startup script is used only if PulseAudio is started per-user
20   -# (i.e. not in system mode)
21   -
22   -.nofail
23   -
24   -### Load something into the sample cache
25   -#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
26   -#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
27   -#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
28   -#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
29   -
30   -.fail
31   -
32   -### Automatically restore the volume of streams and devices
33   -load-module module-device-restore
34   -load-module module-stream-restore
35   -load-module module-card-restore
36   -
37   -### Automatically augment property information from .desktop files
38   -### stored in /usr/share/application
39   -#load-module module-augment-properties
40   -
41   -### Should be after module-*-restore but before module-*-detect
42   -load-module module-switch-on-port-available
43   -
44   -### Load audio drivers statically
45   -### (it's probably better to not load these drivers manually, but instead
46   -### use module-udev-detect -- see below -- for doing this automatically)
47   -load-module module-alsa-sink
48   -load-module module-alsa-source device=hw:0,0
49   -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
50   -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
51   -#load-module module-null-sink
52   -#load-module module-pipe-sink
53   -
54   -### Load driver modules for Bluetooth hardware
55   -.ifexists module-bluetooth-policy.so
56   -load-module module-bluetooth-policy
57   -.endif
58   -
59   -.ifexists module-bluetooth-discover.so
60   -load-module module-bluetooth-discover
61   -.endif
62   -
63   -### Automatically load driver modules depending on the hardware available
64   -#.ifexists module-udev-detect.so
65   -#load-module module-udev-detect tsched=0
66   -#.else
67   -### Use the static hardware detection module (for systems that lack udev support)
68   -#load-module module-detect
69   -#.endif
70   -
71   -### Automatically connect sink and source if JACK server is present
72   -.ifexists module-jackdbus-detect.so
73   -.nofail
74   -load-module module-jackdbus-detect channels=2
75   -.fail
76   -.endif
77   -
78   -### Load several protocols
79   -.ifexists module-esound-protocol-unix.so
80   -load-module module-esound-protocol-unix
81   -.endif
82   -load-module module-native-protocol-unix auth-anonymous=1
83   -
84   -### Network access (may be configured with paprefs, so leave this commented
85   -### here if you plan to use paprefs)
86   -#load-module module-esound-protocol-tcp
87   -#load-module module-native-protocol-tcp
88   -#load-module module-zeroconf-publish
89   -
90   -### Load the RTP receiver module (also configured via paprefs, see above)
91   -#load-module module-rtp-recv
92   -
93   -### Load the RTP sender module (also configured via paprefs, see above)
94   -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
95   -#load-module module-rtp-send source=rtp.monitor
96   -
97   -### Load additional modules from GConf settings. This can be configured with the paprefs tool.
98   -### Please keep in mind that the modules configured by paprefs might conflict with manually
99   -### loaded modules.
100   -#.ifexists module-gconf.so
101   -#.nofail
102   -#load-module module-gconf
103   -#.fail
104   -#.endif
105   -
106   -### Automatically restore the default sink/source when changed by the user
107   -### during runtime
108   -### NOTE: This should be loaded as early as possible so that subsequent modules
109   -### that look up the default sink/source get the right value
110   -load-module module-default-device-restore
111   -
112   -### Automatically move streams to the default sink if the sink they are
113   -### connected to dies, similar for sources
114   -load-module module-rescue-streams
115   -
116   -### Make sure we always have a sink around, even if it is a null sink.
117   -load-module module-always-sink
118   -
119   -### Honour intended role device property
120   -load-module module-intended-roles
121   -
122   -### Automatically suspend sinks/sources that become idle for too long
123   -load-module module-suspend-on-idle
124   -
125   -### If autoexit on idle is enabled we want to make sure we only quit
126   -### when no local session needs us anymore.
127   -#.ifexists module-console-kit.so
128   -#load-module module-console-kit
129   -#.endif
130   -#.ifexists module-systemd-login.so
131   -#load-module module-systemd-login
132   -#.endif
133   -
134   -### Enable positioned event sounds
135   -load-module module-position-event-sounds
136   -
137   -### Cork music/video streams when a phone stream is active
138   -load-module module-role-cork
139   -
140   -### Modules to allow autoloading of filters (such as echo cancellation)
141   -### on demand. module-filter-heuristics tries to determine what filters
142   -### make sense, and module-filter-apply does the heavy-lifting of
143   -### loading modules and rerouting streams.
144   -load-module module-filter-heuristics
145   -load-module module-filter-apply
146   -
147   -### Load DBus protocol
148   -.ifexists module-dbus-protocol.so
149   -load-module module-dbus-protocol
150   -.endif
151   -
152   -# X11 modules should not be started from default.pa so that one daemon
153   -# can be shared by multiple sessions.
154   -
155   -### Load X11 bell module
156   -#load-module module-x11-bell sample=bell-windowing-system
157   -
158   -### Register ourselves in the X11 session manager
159   -#load-module module-x11-xsmp
160   -
161   -### Publish connection data in the X11 root window
162   -#.ifexists module-x11-publish.so
163   -#.nofail
164   -#load-module module-x11-publish
165   -#.fail
166   -#.endif
167   -
168   -### Make some devices default
169   -#set-default-sink output
170   -#set-default-source input
embedian/smarcimx8mp4g/smarcimx8mp4g.sh
View file @ 26863f5
1   -readonly ARCH_CPU="64BIT"
2   -
3   -# U-Boot
4   -readonly G_UBOOT_SRC_DIR="${DEF_SRC_DIR}/uboot"
5   -readonly G_UBOOT_GIT="git@git.embedian.com:developer/smarc-t335x-uboot.git"
6   -readonly G_UBOOT_BRANCH="smarc_8mp_lf_v2020.04"
7   -readonly G_UBOOT_REV="7beba4bebec05d10bfe314e6a47e34d42296a100"
8   -G_UBOOT_DEF_CONFIG_MMC="smarcimx8mp_4g_ser3_defconfig"
9   -readonly G_UBOOT_NAME_FOR_EMMC='imx-boot-sd.bin'
10   -
11   -# Linux kernel
12   -readonly G_LINUX_KERNEL_SRC_DIR="${DEF_SRC_DIR}/kernel"
13   -readonly G_LINUX_KERNEL_GIT="git@git.embedian.com:developer/smarc-fsl-linux-kernel.git"
14   -readonly G_LINUX_KERNEL_BRANCH="smarc_8mp_lf-5.10.y"
15   -readonly G_LINUX_KERNEL_REV="2471bf6c1fd105e00eff834b88a5b43643187fdb"
16   -readonly G_LINUX_KERNEL_DEF_CONFIG='smarcimx8mp_defconfig'
17   -G_LINUX_DTB="embedian/imx8mp-smarc.dtb
18   - embedian/imx8mp-smarc-hdmi.dtb
19   - embedian/imx8mp-smarc-lvds.dtb
20   - embedian/imx8mp-smarc-m7.dtb
21   - "
22   -
23   -readonly G_GPU_IMX_VIV_PACKAGE_DIR="imx-gpu-viv-6.4.3.p1.4"
24   -readonly G_GPU_IMX_VIV_SDK_PACKAGE_DIR="imx-gpu-sdk-6.4.0.p2.0"
25   -readonly GST_MM_VERSION="MM_04.05.07_2011_L5.4.70"
26   -readonly G_GST_PLUGINS_BAD_DIR="MM_04.05.07_2011_L5.4.70_U1"
27   -readonly G2D_PACKAGE_DIR="imx-gpu-g2d-6.4.3.p1.4"
28   -readonly IMX_FIRMWARE_VERSION="8.10"
29   -readonly WESTON_PACKAGE_DIR="imx8m-vivante-g2d/weston-9"
30   -readonly IMX_GPU_VIV_DEFAULT_WL_PACKAGE="imx-gpu-viv-core"
31   -
32   -readonly G_IMX_CODEC_DIR="imxcodec-4.5.7"
33   -readonly G_IMX_PARSER_DIR="imxparser-4.5.7"
34   -readonly G_IMX_VPU_HANTRO_DIR="imxvpuhantro-1.20.0"
35   -readonly G_IMX_VPU_HANTRO_VC_DIR="imxvpuhantro-vc-1.3.0"
36   -readonly G_IMX_VPU_WRAPPER_DIR="imxvpuwrap-4.5.7"
37   -readonly G_IMX_NN_DIR="imx-nn-1.1.9"
38   -
39   -IMXGSTPLG="imx-gst1.0-plugin-mx8mp"
40   -G2DPACKAGE="imx-gpu-g2d"
41   -readonly G_NO_EXECSTACK="y"
42   -
43   -# Flashing variables
44   -BOOTLOADER_OFFSET=32
45   -
46   -BOOT_DTB="imx8mp-smarc.dtb"
47   -DEFAULT_BOOT_DTB="imx8mp-smarc.dtb"
48   -
49   -readonly G_IMXBOOT_SRC_DIR="${DEF_SRC_DIR}/imx-mkimage"
50   -readonly G_IMXBOOT_GIT="git://source.codeaurora.org/external/imx/imx-mkimage.git"
51   -readonly G_IMXBOOT_BRACH="imx_5.4.70_2.3.0"
52   -readonly G_IMXBOOT_REV="8947fea369ab3932259630232cfb9f87b8f9dda1"
53   -
54   -#imx-atf
55   -readonly G_IMX_ATF_SRC_DIR="${DEF_SRC_DIR}/imx-atf"
56   -readonly G_IMX_ATF_GIT="git://source.codeaurora.org/external/imx/imx-atf.git"
57   -readonly G_IMX_ATF_BRANCH="imx_5.4.70_2.3.0"
58   -readonly G_IMX_ATF_REV="f1d7187f261ebf4b8a2a70d638d4bfc0a9b26c29"
59   -
60   -HDMI=yes
61   -TEE_LOAD_ADDR=0xbe000000
62   -ATF_LOAD_ADDR=0x00920000
63   -UBOOT_DTB="imx8mp-smarc.dtb"
64   -IMXBOOT_TARGETS="flash_evk"
65   -IMX_BOOT_TOOL_BL_BIN="bl31-imx8mp.bin"
66   -
67   -# default mirror
68   -readonly DEF_DEBIAN_MIRROR="https://snapshot.debian.org/archive/debian/20210712T151030Z/"
69   -
70   -#rootfs package group control
71   -#Default compilation of rootfs (Console Base + Multimedia + Graphics)
72   -#set package group below from G_DEBIAN_DISTRO_FEATURE_XX="n" to disable it
73   -
74   -#Multimedia - GStreamer Packages - Set it to "n" if you want to disable it
75   -readonly G_DEBIAN_DISTRO_FEATURE_MM="y"
76   -
77   -#Graphics - Full Graphics and GPU SDK - Set it to "n" if you want to disable it
78   -readonly G_DEBIAN_DISTRO_FEATURE_GRAPHICS="y"
79   -
80   -#Machine Learning - Machine learning libraries - Set it to "n" if you want to disable it
81   -readonly G_DEBIAN_DISTRO_FEATURE_ML="y"
embedian/smarcimx8mp4g/weston.config
View file @ 26863f5
1   -#!/bin/sh
2   -OPTARGS="--xwayland --use-g2d=1"
embedian/smarcimx8mp4g/weston.ini
View file @ 26863f5
1   -[core]
2   -#gbm-format=argb8888
3   -idle-time=0
4   -use-g2d=1
5   -xwayland=true
6   -#drm-device=card0
7   -repaint-window=16
8   -#enable-overlay-view=1
9   -
10   -#[shell]
11   -#size=1920x1080
12   -
13   -[libinput]
14   -touchscreen_calibrator=true
15   -
16   -#[output]
17   -#name=HDMI-A-1
18   -#mode=1920x1080@60
19   -#transform=rotate-90
20   -
21   -#[output]
22   -#name=HDMI-A-2
23   -#mode=off
24   -# WIDTHxHEIGHT Resolution size width and height in pixels
25   -# off Disables the output
26   -# preferred Uses the preferred mode
27   -# current Uses the current crt controller mode
28   -#transform=rotate-90
29   -
30   -[screen-share]
31   -command=@bindir@/weston --backend=rdp-backend.so --shell=fullscreen-shell.so --no-clients-resize
32   -
33   -[shell]
34   -background-image=/usr/share/images/desktop-base/default
35   -background-type=scale-crop
embedian/smarcimx8mp6g/01-eth.sh
View file @ 26863f5
1   -#!/bin/sh
2   -
3   -case $1 in
4   -
5   -"suspend")
6   - ;;
7   -"resume")
8   - if [ -d /sys/class/net/eth0 ]; then
9   - ifconfig eth0 down
10   - ifconfig eth0 up
11   - fi
12   - if [ -d /sys/class/net/eth1 ]; then
13   - ifconfig eth1 down
14   - ifconfig eth1 up
15   - fi
16   - ;;
17   -esac
embedian/smarcimx8mp6g/blacklist.conf
View file @ 26863f5
1   -blacklist evbug
embedian/smarcimx8mp6g/bluez5/files/audio.conf
View file @ 26863f5
1   -# This section contains options which are not specific to any
2   -# particular interface
3   -[General]
4   -Enable=Source,Sink,Media,Socket
embedian/smarcimx8mp6g/bluez5/files/main.conf
View file @ 26863f5
1   -[General]
2   -
3   -# Default adaper name
4   -# Defaults to 'BlueZ X.YZ'
5   -Name = Variscite
6   -
7   -# Default device class. Only the major and minor device class bits are
8   -# considered. Defaults to '0x000000'.
9   -Class = 0x000100
10   -
11   -# How long to stay in discoverable mode before going back to non-discoverable
12   -# The value is in seconds. Default is 180, i.e. 3 minutes.
13   -# 0 = disable timer, i.e. stay discoverable forever
14   -#DiscoverableTimeout = 0
15   -
16   -# How long to stay in pairable mode before going back to non-discoverable
17   -# The value is in seconds. Default is 0.
18   -# 0 = disable timer, i.e. stay pairable forever
19   -#PairableTimeout = 0
20   -
21   -# Automatic connection for bonded devices driven by platform/user events.
22   -# If a platform plugin uses this mechanism, automatic connections will be
23   -# enabled during the interval defined below. Initially, this feature
24   -# intends to be used to establish connections to ATT channels. Default is 60.
25   -#AutoConnectTimeout = 60
26   -
27   -# Use vendor id source (assigner), vendor, product and version information for
28   -# DID profile support. The values are separated by ":" and assigner, VID, PID
29   -# and version.
30   -# Possible vendor id source values: bluetooth, usb (defaults to usb)
31   -#DeviceID = bluetooth:1234:5678:abcd
32   -
33   -# Do reverse service discovery for previously unknown devices that connect to
34   -# us. This option is really only needed for qualification since the BITE tester
35   -# doesn't like us doing reverse SDP for some test cases (though there could in
36   -# theory be other useful purposes for this too). Defaults to 'true'.
37   -#ReverseServiceDiscovery = true
38   -
39   -# Enable name resolving after inquiry. Set it to 'false' if you don't need
40   -# remote devices name and want shorter discovery cycle. Defaults to 'true'.
41   -#NameResolving = true
42   -
43   -# Enable runtime persistency of debug link keys. Default is false which
44   -# makes debug link keys valid only for the duration of the connection
45   -# that they were created for.
46   -#DebugKeys = false
47   -
48   -# Restricts all controllers to the specified transport. Default value
49   -# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
50   -# Possible values: "dual", "bredr", "le"
51   -#ControllerMode = dual
52   -
53   -# Enables Multi Profile Specification support. This allows to specify if
54   -# system supports only Multiple Profiles Single Device (MPSD) configuration
55   -# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
56   -# Devices (MPMD) configurations.
57   -# Possible values: "off", "single", "multiple"
58   -#MultiProfile = off
59   -
60   -# Permanently enables the Fast Connectable setting for adapters that
61   -# support it. When enabled other devices can connect faster to us,
62   -# however the tradeoff is increased power consumptions. This feature
63   -# will fully work only on kernel version 4.1 and newer. Defaults to
64   -# 'false'.
65   -#FastConnectable = false
66   -
67   -#[Policy]
68   -#
69   -# The ReconnectUUIDs defines the set of remote services that should try
70   -# to be reconnected to in case of a link loss (link supervision
71   -# timeout). The policy plugin should contain a sane set of values by
72   -# default, but this list can be overridden here. By setting the list to
73   -# empty the reconnection feature gets disabled.
74   -#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb, 0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb
75   -
76   -# ReconnectAttempts define the number of attempts to reconnect after a link
77   -# lost. Setting the value to 0 disables reconnecting feature.
78   -#ReconnectAttempts=7
79   -
80   -# ReconnectIntervals define the set of intervals in seconds to use in between
81   -# attempts.
82   -# If the number of attempts defined in ReconnectAttempts is bigger than the
83   -# set of intervals the last interval is repeated until the last attempt.
84   -#ReconnectIntervals=1, 2, 4, 8, 16, 32, 64
85   -
86   -# AutoEnable defines option to enable all controllers when they are found.
87   -# This includes adapters present on start as well as adapters that are plugged
88   -# in later on. Defaults to 'false'.
89   -#AutoEnable=false
embedian/smarcimx8mp6g/bluez5/files/obex.service
View file @ 26863f5
1   -[Unit]
2   -Description=Bluetooth OBEX service
3   -
4   -[Service]
5   -Type=dbus
6   -BusName=org.bluez.obex
7   -Environment="DBUS_SESSION_BUS_ADDRESS=unix:path=/var/run/dbus/system_bus_socket"
8   -ExecStartPre=/bin/mkdir -p /tmp/bluetooth-inbox
9   -ExecStart=/usr/libexec/bluetooth/obexd -a -l -r /tmp/bluetooth-inbox
10   -
11   -[Install]
12   -Alias=dbus-org.bluez.obex.service
embedian/smarcimx8mp6g/bluez5/files/obexd.conf
View file @ 26863f5
1   -<!-- This configuration file specifies the required security policies
2   - for Obex core daemon to work. -->
3   -
4   -<!DOCTYPE busconfig PUBLIC "-//freedesktop/DTD D-BUS Configuration 1.0//EN"
5   - "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
6   -<busconfig>
7   - <policy user="root">
8   - <allow own="org.bluez.obex"/>
9   - <allow send_destination="org.bluez.obex"/>
10   - <allow send_interface="org.bluez.obex"/>
11   - </policy>
12   -</busconfig>
embedian/smarcimx8mp6g/imx-boot-tools/imx-boot/imx-mkimage-imx8m-soc.mak-add-smarc-imx8mp-support.patch
View file @ 26863f5
1   -From 7032ad5669be3ee54da01a864c9ea1d560f756e5 Mon Sep 17 00:00:00 2001
2   -From: Eric Lee <eric.lee@embedian.com>
3   -Date: Sun, 31 Oct 2021 00:31:53 +0800
4   -Subject: [PATCH] imx-mkimage: imx8m: soc.mak: Add support for Embedian
5   -
6   ----
7   - iMX8M/soc.mak | 4 ++--
8   - 1 file changed, 2 insertions(+), 2 deletions(-)
9   -
10   -diff --git a/iMX8M/soc.mak b/iMX8M/soc.mak
11   -index 30ecefd..c362034 100644
12   ---- a/iMX8M/soc.mak
13   -+++ b/iMX8M/soc.mak
14   -@@ -137,9 +137,9 @@ u-boot-atf-tee.bin: u-boot.bin bl31.bin tee.bin
15   - clean:
16   - @rm -f $(MKIMG) u-boot-atf.bin u-boot-atf-tee.bin u-boot-spl-ddr.bin u-boot.itb u-boot.its u-boot-ddr3l.itb u-boot-ddr3l.its u-boot-spl-ddr3l.bin u-boot-ddr4.itb u-boot-ddr4.its u-boot-spl-ddr4.bin u-boot-ddr4-evk.itb u-boot-ivt.itb u-boot-ddr4-evk.its $(OUTIMG)
17   -
18   --dtbs = evk.dtb
19   -+dtbs = smarc.dtb
20   - $(dtbs):
21   -- ./$(DTB_PREPROC) $(PLAT)-evk.dtb $(dtbs)
22   -+ ./$(DTB_PREPROC) $(PLAT)-smarc.dtb $(dtbs)
23   -
24   - u-boot.itb: $(dtbs)
25   - ./$(PAD_IMAGE) tee.bin
26   ---
27   -2.17.1
embedian/smarcimx8mp6g/pulseaudio/default.pa
View file @ 26863f5
1   -#!/usr/bin/pulseaudio -nF
2   -#
3   -# This file is part of PulseAudio.
4   -#
5   -# PulseAudio is free software; you can redistribute it and/or modify it
6   -# under the terms of the GNU Lesser General Public License as published by
7   -# the Free Software Foundation; either version 2 of the License, or
8   -# (at your option) any later version.
9   -#
10   -# PulseAudio is distributed in the hope that it will be useful, but
11   -# WITHOUT ANY WARRANTY; without even the implied warranty of
12   -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13   -# General Public License for more details.
14   -#
15   -# You should have received a copy of the GNU Lesser General Public License
16   -# along with PulseAudio; if not, write to the Free Software Foundation,
17   -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
18   -
19   -# This startup script is used only if PulseAudio is started per-user
20   -# (i.e. not in system mode)
21   -
22   -.nofail
23   -
24   -### Load something into the sample cache
25   -#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
26   -#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
27   -#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
28   -#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
29   -
30   -.fail
31   -
32   -### Automatically restore the volume of streams and devices
33   -load-module module-device-restore
34   -load-module module-stream-restore
35   -load-module module-card-restore
36   -
37   -### Automatically augment property information from .desktop files
38   -### stored in /usr/share/application
39   -load-module module-augment-properties
40   -
41   -### Should be after module-*-restore but before module-*-detect
42   -load-module module-switch-on-port-available
43   -
44   -### Load audio drivers statically
45   -### (it's probably better to not load these drivers manually, but instead
46   -### use module-udev-detect -- see below -- for doing this automatically)
47   -load-module module-alsa-sink
48   -load-module module-alsa-source device=hw:0,0
49   -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
50   -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
51   -#load-module module-null-sink
52   -#load-module module-pipe-sink
53   -
54   -### Automatically load driver modules depending on the hardware available
55   -#.ifexists module-udev-detect.so
56   -#load-module module-udev-detect tsched=0
57   -#.else
58   -### Use the static hardware detection module (for systems that lack udev support)
59   -#load-module module-detect
60   -#.endif
61   -
62   -### Automatically connect sink and source if JACK server is present
63   -.ifexists module-jackdbus-detect.so
64   -.nofail
65   -load-module module-jackdbus-detect channels=2
66   -.fail
67   -.endif
68   -
69   -### Automatically load driver modules for Bluetooth hardware
70   -.ifexists module-bluetooth-policy.so
71   -load-module module-bluetooth-policy
72   -.endif
73   -
74   -.ifexists module-bluetooth-discover.so
75   -load-module module-bluetooth-discover
76   -.endif
77   -
78   -### Load several protocols
79   -.ifexists module-esound-protocol-unix.so
80   -load-module module-esound-protocol-unix
81   -.endif
82   -load-module module-native-protocol-unix
83   -
84   -### Network access (may be configured with paprefs, so leave this commented
85   -### here if you plan to use paprefs)
86   -#load-module module-esound-protocol-tcp
87   -#load-module module-native-protocol-tcp
88   -#load-module module-zeroconf-publish
89   -
90   -### Load the RTP receiver module (also configured via paprefs, see above)
91   -#load-module module-rtp-recv
92   -
93   -### Load the RTP sender module (also configured via paprefs, see above)
94   -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
95   -#load-module module-rtp-send source=rtp.monitor
96   -
97   -### Load additional modules from GConf settings. This can be configured with the paprefs tool.
98   -### Please keep in mind that the modules configured by paprefs might conflict with manually
99   -### loaded modules.
100   -.ifexists module-gconf.so
101   -.nofail
102   -load-module module-gconf
103   -.fail
104   -.endif
105   -
106   -### Automatically restore the default sink/source when changed by the user
107   -### during runtime
108   -### NOTE: This should be loaded as early as possible so that subsequent modules
109   -### that look up the default sink/source get the right value
110   -load-module module-default-device-restore
111   -
112   -### Automatically move streams to the default sink if the sink they are
113   -### connected to dies, similar for sources
114   -load-module module-rescue-streams
115   -
116   -### Make sure we always have a sink around, even if it is a null sink.
117   -load-module module-always-sink
118   -
119   -### Honour intended role device property
120   -load-module module-intended-roles
121   -
122   -### Automatically suspend sinks/sources that become idle for too long
123   -load-module module-suspend-on-idle
124   -
125   -### If autoexit on idle is enabled we want to make sure we only quit
126   -### when no local session needs us anymore.
127   -.ifexists module-console-kit.so
128   -load-module module-console-kit
129   -.endif
130   -.ifexists module-systemd-login.so
131   -load-module module-systemd-login
132   -.endif
133   -
134   -### Enable positioned event sounds
135   -load-module module-position-event-sounds
136   -
137   -### Cork music/video streams when a phone stream is active
138   -load-module module-role-cork
139   -
140   -### Modules to allow autoloading of filters (such as echo cancellation)
141   -### on demand. module-filter-heuristics tries to determine what filters
142   -### make sense, and module-filter-apply does the heavy-lifting of
143   -### loading modules and rerouting streams.
144   -load-module module-filter-heuristics
145   -load-module module-filter-apply
146   -
147   -### Load DBus protocol
148   -.ifexists module-dbus-protocol.so
149   -load-module module-dbus-protocol
150   -.endif
151   -
152   -# X11 modules should not be started from default.pa so that one daemon
153   -# can be shared by multiple sessions.
154   -
155   -### Load X11 bell module
156   -#load-module module-x11-bell sample=bell-windowing-system
157   -
158   -### Register ourselves in the X11 session manager
159   -#load-module module-x11-xsmp
160   -
161   -### Publish connection data in the X11 root window
162   -#.ifexists module-x11-publish.so
163   -#.nofail
164   -#load-module module-x11-publish
165   -#.fail
166   -#.endif
167   -
168   -### Make some devices default
169   -#set-default-sink output
170   -#set-default-source input
embedian/smarcimx8mp6g/pulseaudio/pulseaudio-bluetooth.conf
View file @ 26863f5
1   -<busconfig>
2   -
3   - <policy user="pulse">
4   - <allow send_destination="org.bluez"/>
5   - </policy>
6   -
7   -</busconfig>
embedian/smarcimx8mp6g/pulseaudio/pulseaudio.service
View file @ 26863f5
1   -[Unit]
2   -Description=PulseAudio system server
3   -
4   -[Service]
5   -Type=forking
6   -PIDFile=/var/run/pulse/pid
7   -ExecStart=/usr/bin/pulseaudio --system --disallow-exit --disable-shm --exit-idle-time=-1 --daemonize
8   -
9   -[Install]
10   -WantedBy=multi-user.target
embedian/smarcimx8mp6g/pulseaudio/system.pa
View file @ 26863f5
1   -#!/usr/bin/pulseaudio -nF
2   -#
3   -# This file is part of PulseAudio.
4   -#
5   -# PulseAudio is free software; you can redistribute it and/or modify it
6   -# under the terms of the GNU Lesser General Public License as published by
7   -# the Free Software Foundation; either version 2 of the License, or
8   -# (at your option) any later version.
9   -#
10   -# PulseAudio is distributed in the hope that it will be useful, but
11   -# WITHOUT ANY WARRANTY; without even the implied warranty of
12   -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13   -# General Public License for more details.
14   -#
15   -# You should have received a copy of the GNU Lesser General Public License
16   -# along with PulseAudio; if not, write to the Free Software Foundation,
17   -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
18   -
19   -# This startup script is used only if PulseAudio is started per-user
20   -# (i.e. not in system mode)
21   -
22   -.nofail
23   -
24   -### Load something into the sample cache
25   -#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
26   -#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
27   -#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
28   -#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
29   -
30   -.fail
31   -
32   -### Automatically restore the volume of streams and devices
33   -load-module module-device-restore
34   -load-module module-stream-restore
35   -load-module module-card-restore
36   -
37   -### Automatically augment property information from .desktop files
38   -### stored in /usr/share/application
39   -#load-module module-augment-properties
40   -
41   -### Should be after module-*-restore but before module-*-detect
42   -load-module module-switch-on-port-available
43   -
44   -### Load audio drivers statically
45   -### (it's probably better to not load these drivers manually, but instead
46   -### use module-udev-detect -- see below -- for doing this automatically)
47   -load-module module-alsa-sink
48   -load-module module-alsa-source device=hw:0,0
49   -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
50   -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
51   -#load-module module-null-sink
52   -#load-module module-pipe-sink
53   -
54   -### Load driver modules for Bluetooth hardware
55   -.ifexists module-bluetooth-policy.so
56   -load-module module-bluetooth-policy
57   -.endif
58   -
59   -.ifexists module-bluetooth-discover.so
60   -load-module module-bluetooth-discover
61   -.endif
62   -
63   -### Automatically load driver modules depending on the hardware available
64   -#.ifexists module-udev-detect.so
65   -#load-module module-udev-detect tsched=0
66   -#.else
67   -### Use the static hardware detection module (for systems that lack udev support)
68   -#load-module module-detect
69   -#.endif
70   -
71   -### Automatically connect sink and source if JACK server is present
72   -.ifexists module-jackdbus-detect.so
73   -.nofail
74   -load-module module-jackdbus-detect channels=2
75   -.fail
76   -.endif
77   -
78   -### Load several protocols
79   -.ifexists module-esound-protocol-unix.so
80   -load-module module-esound-protocol-unix
81   -.endif
82   -load-module module-native-protocol-unix auth-anonymous=1
83   -
84   -### Network access (may be configured with paprefs, so leave this commented
85   -### here if you plan to use paprefs)
86   -#load-module module-esound-protocol-tcp
87   -#load-module module-native-protocol-tcp
88   -#load-module module-zeroconf-publish
89   -
90   -### Load the RTP receiver module (also configured via paprefs, see above)
91   -#load-module module-rtp-recv
92   -
93   -### Load the RTP sender module (also configured via paprefs, see above)
94   -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
95   -#load-module module-rtp-send source=rtp.monitor
96   -
97   -### Load additional modules from GConf settings. This can be configured with the paprefs tool.
98   -### Please keep in mind that the modules configured by paprefs might conflict with manually
99   -### loaded modules.
100   -#.ifexists module-gconf.so
101   -#.nofail
102   -#load-module module-gconf
103   -#.fail
104   -#.endif
105   -
106   -### Automatically restore the default sink/source when changed by the user
107   -### during runtime
108   -### NOTE: This should be loaded as early as possible so that subsequent modules
109   -### that look up the default sink/source get the right value
110   -load-module module-default-device-restore
111   -
112   -### Automatically move streams to the default sink if the sink they are
113   -### connected to dies, similar for sources
114   -load-module module-rescue-streams
115   -
116   -### Make sure we always have a sink around, even if it is a null sink.
117   -load-module module-always-sink
118   -
119   -### Honour intended role device property
120   -load-module module-intended-roles
121   -
122   -### Automatically suspend sinks/sources that become idle for too long
123   -load-module module-suspend-on-idle
124   -
125   -### If autoexit on idle is enabled we want to make sure we only quit
126   -### when no local session needs us anymore.
127   -#.ifexists module-console-kit.so
128   -#load-module module-console-kit
129   -#.endif
130   -#.ifexists module-systemd-login.so
131   -#load-module module-systemd-login
132   -#.endif
133   -
134   -### Enable positioned event sounds
135   -load-module module-position-event-sounds
136   -
137   -### Cork music/video streams when a phone stream is active
138   -load-module module-role-cork
139   -
140   -### Modules to allow autoloading of filters (such as echo cancellation)
141   -### on demand. module-filter-heuristics tries to determine what filters
142   -### make sense, and module-filter-apply does the heavy-lifting of
143   -### loading modules and rerouting streams.
144   -load-module module-filter-heuristics
145   -load-module module-filter-apply
146   -
147   -### Load DBus protocol
148   -.ifexists module-dbus-protocol.so
149   -load-module module-dbus-protocol
150   -.endif
151   -
152   -# X11 modules should not be started from default.pa so that one daemon
153   -# can be shared by multiple sessions.
154   -
155   -### Load X11 bell module
156   -#load-module module-x11-bell sample=bell-windowing-system
157   -
158   -### Register ourselves in the X11 session manager
159   -#load-module module-x11-xsmp
160   -
161   -### Publish connection data in the X11 root window
162   -#.ifexists module-x11-publish.so
163   -#.nofail
164   -#load-module module-x11-publish
165   -#.fail
166   -#.endif
167   -
168   -### Make some devices default
169   -#set-default-sink output
170   -#set-default-source input
embedian/smarcimx8mp6g/smarcimx8mp6g.sh
View file @ 26863f5
1   -readonly ARCH_CPU="64BIT"
2   -
3   -# U-Boot
4   -readonly G_UBOOT_SRC_DIR="${DEF_SRC_DIR}/uboot"
5   -readonly G_UBOOT_GIT="git@git.embedian.com:developer/smarc-t335x-uboot.git"
6   -readonly G_UBOOT_BRANCH="smarc_8mp_lf_v2020.04"
7   -readonly G_UBOOT_REV="57e535649cba0900d49c3a06ddb7b3c15b900255"
8   -G_UBOOT_DEF_CONFIG_MMC="smarcimx8mp_6g_ser3_defconfig"
9   -readonly G_UBOOT_NAME_FOR_EMMC='imx-boot-sd.bin'
10   -
11   -# Linux kernel
12   -readonly G_LINUX_KERNEL_SRC_DIR="${DEF_SRC_DIR}/kernel"
13   -readonly G_LINUX_KERNEL_GIT="git@git.embedian.com:developer/smarc-fsl-linux-kernel.git"
14   -readonly G_LINUX_KERNEL_BRANCH="smarc_8mp_lf-5.10.y"
15   -readonly G_LINUX_KERNEL_REV="2471bf6c1fd105e00eff834b88a5b43643187fdb"
16   -readonly G_LINUX_KERNEL_DEF_CONFIG='smarcimx8mp_defconfig'
17   -G_LINUX_DTB="embedian/imx8mp-smarc.dtb
18   - embedian/imx8mp-smarc-hdmi.dtb
19   - embedian/imx8mp-smarc-lvds.dtb
20   - embedian/imx8mp-smarc-m7.dtb
21   - "
22   -
23   -readonly G_GPU_IMX_VIV_PACKAGE_DIR="imx-gpu-viv-6.4.3.p1.4"
24   -readonly G_GPU_IMX_VIV_SDK_PACKAGE_DIR="imx-gpu-sdk-6.4.0.p2.0"
25   -readonly GST_MM_VERSION="MM_04.05.07_2011_L5.4.70"
26   -readonly G_GST_PLUGINS_BAD_DIR="MM_04.05.07_2011_L5.4.70_U1"
27   -readonly G2D_PACKAGE_DIR="imx-gpu-g2d-6.4.3.p1.4"
28   -readonly IMX_FIRMWARE_VERSION="8.10"
29   -readonly WESTON_PACKAGE_DIR="imx8m-vivante-g2d/weston-9"
30   -readonly IMX_GPU_VIV_DEFAULT_WL_PACKAGE="imx-gpu-viv-core"
31   -
32   -readonly G_IMX_CODEC_DIR="imxcodec-4.5.7"
33   -readonly G_IMX_PARSER_DIR="imxparser-4.5.7"
34   -readonly G_IMX_VPU_HANTRO_DIR="imxvpuhantro-1.20.0"
35   -readonly G_IMX_VPU_HANTRO_VC_DIR="imxvpuhantro-vc-1.3.0"
36   -readonly G_IMX_VPU_WRAPPER_DIR="imxvpuwrap-4.5.7"
37   -readonly G_IMX_NN_DIR="imx-nn-1.1.9"
38   -
39   -IMXGSTPLG="imx-gst1.0-plugin-mx8mp"
40   -G2DPACKAGE="imx-gpu-g2d"
41   -readonly G_NO_EXECSTACK="y"
42   -
43   -# Flashing variables
44   -BOOTLOADER_OFFSET=32
45   -
46   -BOOT_DTB="imx8mp-smarc.dtb"
47   -DEFAULT_BOOT_DTB="imx8mp-smarc.dtb"
48   -
49   -readonly G_IMXBOOT_SRC_DIR="${DEF_SRC_DIR}/imx-mkimage"
50   -readonly G_IMXBOOT_GIT="git://source.codeaurora.org/external/imx/imx-mkimage.git"
51   -readonly G_IMXBOOT_BRACH="imx_5.4.70_2.3.0"
52   -readonly G_IMXBOOT_REV="8947fea369ab3932259630232cfb9f87b8f9dda1"
53   -
54   -#imx-atf
55   -readonly G_IMX_ATF_SRC_DIR="${DEF_SRC_DIR}/imx-atf"
56   -readonly G_IMX_ATF_GIT="git://source.codeaurora.org/external/imx/imx-atf.git"
57   -readonly G_IMX_ATF_BRANCH="imx_5.4.70_2.3.0"
58   -readonly G_IMX_ATF_REV="f1d7187f261ebf4b8a2a70d638d4bfc0a9b26c29"
59   -
60   -HDMI=yes
61   -TEE_LOAD_ADDR=0xbe000000
62   -ATF_LOAD_ADDR=0x00920000
63   -UBOOT_DTB="imx8mp-smarc.dtb"
64   -IMXBOOT_TARGETS="flash_evk"
65   -IMX_BOOT_TOOL_BL_BIN="bl31-imx8mp.bin"
66   -
67   -# default mirror
68   -readonly DEF_DEBIAN_MIRROR="https://snapshot.debian.org/archive/debian/20210712T151030Z/"
69   -
70   -#rootfs package group control
71   -#Default compilation of rootfs (Console Base + Multimedia + Graphics)
72   -#set package group below from G_DEBIAN_DISTRO_FEATURE_XX="n" to disable it
73   -
74   -#Multimedia - GStreamer Packages - Set it to "n" if you want to disable it
75   -readonly G_DEBIAN_DISTRO_FEATURE_MM="y"
76   -
77   -#Graphics - Full Graphics and GPU SDK - Set it to "n" if you want to disable it
78   -readonly G_DEBIAN_DISTRO_FEATURE_GRAPHICS="y"
79   -
80   -#Machine Learning - Machine learning libraries - Set it to "n" if you want to disable it
81   -readonly G_DEBIAN_DISTRO_FEATURE_ML="y"
embedian/smarcimx8mp6g/weston.config
View file @ 26863f5
1   -#!/bin/sh
2   -OPTARGS="--xwayland --use-g2d=1"
embedian/smarcimx8mp6g/weston.ini
View file @ 26863f5
1   -[core]
2   -#gbm-format=argb8888
3   -idle-time=0
4   -use-g2d=1
5   -xwayland=true
6   -#drm-device=card0
7   -repaint-window=16
8   -#enable-overlay-view=1
9   -
10   -#[shell]
11   -#size=1920x1080
12   -
13   -[libinput]
14   -touchscreen_calibrator=true
15   -
16   -#[output]
17   -#name=HDMI-A-1
18   -#mode=1920x1080@60
19   -#transform=rotate-90
20   -
21   -#[output]
22   -#name=HDMI-A-2
23   -#mode=off
24   -# WIDTHxHEIGHT Resolution size width and height in pixels
25   -# off Disables the output
26   -# preferred Uses the preferred mode
27   -# current Uses the current crt controller mode
28   -#transform=rotate-90
29   -
30   -[screen-share]
31   -command=@bindir@/weston --backend=rdp-backend.so --shell=fullscreen-shell.so --no-clients-resize
32   -
33   -[shell]
34   -background-image=/usr/share/images/desktop-base/default
35   -background-type=scale-crop
embedian/smarcimx8mq2g/smarcimx8mq2g.sh
Diff comments   View file @ 26863f5
... ... @@ -4,7 +4,7 @@
4 4 readonly G_UBOOT_SRC_DIR="${DEF_SRC_DIR}/uboot"
5 5 readonly G_UBOOT_GIT="git@git.embedian.com:developer/smarc-t335x-uboot.git"
6 6 readonly G_UBOOT_BRANCH="smarc_8mq_lf_v2020.04"
7   -readonly G_UBOOT_REV="312ec620f3557f27301ec51dec03d4c4154d161e"
  7 +readonly G_UBOOT_REV="3f74d2934ffabab54e83ef0afcdb9dfb0a31a3da"
8 8 G_UBOOT_DEF_CONFIG_MMC="smarcimx8mq_2g_ser3_defconfig"
9 9 readonly G_UBOOT_NAME_FOR_EMMC='imx-boot-sd.bin'
10 10 readonly G_UBOOT_NAME_FOR_EMMC_DP='imx-boot-sd-dp.bin'
... ... @@ -13,7 +13,7 @@
13 13 readonly G_LINUX_KERNEL_SRC_DIR="${DEF_SRC_DIR}/kernel"
14 14 readonly G_LINUX_KERNEL_GIT="git@git.embedian.com:developer/smarc-fsl-linux-kernel.git"
15 15 readonly G_LINUX_KERNEL_BRANCH="smarc_8mq_lf-5.10.y"
16   -readonly G_LINUX_KERNEL_REV="cc6b6434fb239ffa20eb087bdeb5070282b50810"
  16 +readonly G_LINUX_KERNEL_REV="c4aa46bd382d293fac44fd4bee31f698ebe7b940"
17 17 readonly G_LINUX_KERNEL_DEF_CONFIG='smarcimx8mq_defconfig'
18 18 G_LINUX_DTB="embedian/imx8mq-smarc.dtb
19 19 embedian/imx8mq-smarc-hdmi.dtb
20 20  
... ... @@ -52,13 +52,13 @@
52 52 DEFAULT_BOOT_DTB="imx8mq-smarc.dtb"
53 53  
54 54 readonly G_IMXBOOT_SRC_DIR="${DEF_SRC_DIR}/imx-mkimage"
55   -readonly G_IMXBOOT_GIT="git://source.codeaurora.org/external/imx/imx-mkimage.git"
  55 +readonly G_IMXBOOT_GIT="https://github.com/nxp-imx/imx-mkimage.git"
56 56 readonly G_IMXBOOT_BRACH="imx_5.4.70_2.3.0"
57 57 readonly G_IMXBOOT_REV="8947fea369ab3932259630232cfb9f87b8f9dda1"
58 58  
59 59 #imx-atf
60 60 readonly G_IMX_ATF_SRC_DIR="${DEF_SRC_DIR}/imx-atf"
61   -readonly G_IMX_ATF_GIT="git://source.codeaurora.org/external/imx/imx-atf.git"
  61 +readonly G_IMX_ATF_GIT="https://github.com/nxp-imx/imx-atf.git"
62 62 readonly G_IMX_ATF_BRANCH="imx_5.4.70_2.3.0"
63 63 readonly G_IMX_ATF_REV="f1d7187f261ebf4b8a2a70d638d4bfc0a9b26c29"
64 64  
... ... @@ -70,7 +70,7 @@
70 70 IMX_BOOT_TOOL_BL_BIN="bl31-imx8mq.bin"
71 71  
72 72 # default mirror
73   -readonly DEF_DEBIAN_MIRROR="https://snapshot.debian.org/archive/debian/20210712T151030Z/"
  73 +readonly DEF_DEBIAN_MIRROR="https://debian.osuosl.org/debian/"
74 74  
75 75 #rootfs package group control
76 76 #Default compilation of rootfs (Console Base + Multimedia + Graphics)
embedian/smarcimx8mq4g/smarcimx8mq4g.sh
Diff comments   View file @ 26863f5
... ... @@ -4,7 +4,7 @@
4 4 readonly G_UBOOT_SRC_DIR="${DEF_SRC_DIR}/uboot"
5 5 readonly G_UBOOT_GIT="git@git.embedian.com:developer/smarc-t335x-uboot.git"
6 6 readonly G_UBOOT_BRANCH="smarc_8mq_lf_v2020.04"
7   -readonly G_UBOOT_REV="312ec620f3557f27301ec51dec03d4c4154d161e"
  7 +readonly G_UBOOT_REV="3f74d2934ffabab54e83ef0afcdb9dfb0a31a3da"
8 8 G_UBOOT_DEF_CONFIG_MMC="smarcimx8mq_4g_ser3_defconfig"
9 9 readonly G_UBOOT_NAME_FOR_EMMC='imx-boot-sd.bin'
10 10 readonly G_UBOOT_NAME_FOR_EMMC_DP='imx-boot-sd-dp.bin'
... ... @@ -13,7 +13,7 @@
13 13 readonly G_LINUX_KERNEL_SRC_DIR="${DEF_SRC_DIR}/kernel"
14 14 readonly G_LINUX_KERNEL_GIT="git@git.embedian.com:developer/smarc-fsl-linux-kernel.git"
15 15 readonly G_LINUX_KERNEL_BRANCH="smarc_8mq_lf-5.10.y"
16   -readonly G_LINUX_KERNEL_REV="cc6b6434fb239ffa20eb087bdeb5070282b50810"
  16 +readonly G_LINUX_KERNEL_REV="c4aa46bd382d293fac44fd4bee31f698ebe7b940"
17 17 readonly G_LINUX_KERNEL_DEF_CONFIG='smarcimx8mq_defconfig'
18 18 G_LINUX_DTB="embedian/imx8mq-smarc.dtb
19 19 embedian/imx8mq-smarc-hdmi.dtb
20 20  
... ... @@ -52,13 +52,13 @@
52 52 DEFAULT_BOOT_DTB="imx8mq-smarc.dtb"
53 53  
54 54 readonly G_IMXBOOT_SRC_DIR="${DEF_SRC_DIR}/imx-mkimage"
55   -readonly G_IMXBOOT_GIT="git://source.codeaurora.org/external/imx/imx-mkimage.git"
  55 +readonly G_IMXBOOT_GIT="https://github.com/nxp-imx/imx-mkimage.git"
56 56 readonly G_IMXBOOT_BRACH="imx_5.4.70_2.3.0"
57 57 readonly G_IMXBOOT_REV="8947fea369ab3932259630232cfb9f87b8f9dda1"
58 58  
59 59 #imx-atf
60 60 readonly G_IMX_ATF_SRC_DIR="${DEF_SRC_DIR}/imx-atf"
61   -readonly G_IMX_ATF_GIT="git://source.codeaurora.org/external/imx/imx-atf.git"
  61 +readonly G_IMX_ATF_GIT="https://github.com/nxp-imx/imx-atf.git"
62 62 readonly G_IMX_ATF_BRANCH="imx_5.4.70_2.3.0"
63 63 readonly G_IMX_ATF_REV="f1d7187f261ebf4b8a2a70d638d4bfc0a9b26c29"
64 64  
... ... @@ -70,7 +70,7 @@
70 70 IMX_BOOT_TOOL_BL_BIN="bl31-imx8mq.bin"
71 71  
72 72 # default mirror
73   -readonly DEF_DEBIAN_MIRROR="https://snapshot.debian.org/archive/debian/20210712T151030Z/"
  73 +readonly DEF_DEBIAN_MIRROR="https://debian.osuosl.org/debian/"
74 74  
75 75 #rootfs package group control
76 76 #Default compilation of rootfs (Console Base + Multimedia + Graphics)
embedian/weston_rootfs.sh
Diff comments   View file @ 26863f5
... ... @@ -821,7 +821,8 @@
821 821 cp -v ${LPARAM_OUTPUT_DIR}/imx8mq-smarc-${DISPLAY}.dtb ${P1_MOUNT_DIR}/dtbs/imx8mq-smarc.dtb
822 822 cp -v ${G_EMBEDIAN_PATH}/uEnv_8mq.txt ${P1_MOUNT_DIR}/uEnv.txt
823 823 fi
824   - if [ "${MACHINE}" = "smarcimx8mp4g" ] ||
  824 + if [ "${MACHINE}" = "smarcimx8mp2g" ] || \
  825 + [ "${MACHINE}" = "smarcimx8mp4g" ] || \
825 826 [ "${MACHINE}" = "smarcimx8mp6g" ]; then
826 827 cp -v ${LPARAM_OUTPUT_DIR}/imx8mp-smarc-${DISPLAY}.dtb ${P1_MOUNT_DIR}/dtbs/imx8mp-smarc.dtb
827 828 cp -v ${G_EMBEDIAN_PATH}/uEnv_8mp.txt ${P1_MOUNT_DIR}/uEnv.txt
... ... @@ -840,7 +841,8 @@
840 841 ${P2_MOUNT_DIR}/${DEBIAN_IMAGES_TO_ROOTFS_POINT}/${DEF_ROOTFS_TARBALL_NAME}
841 842  
842 843 pr_info "Copying MMC U-Boot to /${DEBIAN_IMAGES_TO_ROOTFS_POINT}"
843   - if [ "${MACHINE}" = "smarcimx8mp4g" ] || \
  844 + if [ "${MACHINE}" = "smarcimx8mp2g" ] || \
  845 + [ "${MACHINE}" = "smarcimx8mp4g" ] || \
844 846 [ "${MACHINE}" = "smarcimx8mp6g" ]; then
845 847 cp ${LPARAM_OUTPUT_DIR}/imx-boot-* \
846 848 ${P2_MOUNT_DIR}/${DEBIAN_IMAGES_TO_ROOTFS_POINT}/
... ... @@ -858,7 +860,8 @@
858 860 cp ${G_EMBEDIAN_PATH}/uEnv_emmc_8mq.txt \
859 861 ${P2_MOUNT_DIR}/${DEBIAN_IMAGES_TO_ROOTFS_POINT}/uEnv.txt
860 862 fi
861   - if [ "${MACHINE}" = "smarcimx8mp4g" ] ||
  863 + if [ "${MACHINE}" = "smarcimx8mp2g" ] || \
  864 + [ "${MACHINE}" = "smarcimx8mp4g" ] || \
862 865 [ "${MACHINE}" = "smarcimx8mp6g" ]; then
863 866 cp ${G_EMBEDIAN_PATH}/uEnv_emmc_8mp.txt \
864 867 ${P2_MOUNT_DIR}/${DEBIAN_IMAGES_TO_ROOTFS_POINT}/uEnv.txt