01 Dec, 2011
1 commit
-
This patch corrects keypwr1 pinmux to gpmc_a6.gpio1_22
Signed-off-by: Goutam Kumar
Signed-off-by: Hebbar, Gururaja
23 Nov, 2011
1 commit
-
* Fix a wrong gpio pin used for bluetooth enable on the beta evm.
was using gpio0_17 while it should be gpio3_21* Add a 70 msec delay after turning wlan on to allow for all voltages
to settle down before starting sdio activitySigned-off-by: Eyal Reizer
22 Nov, 2011
1 commit
-
Added PROFIBUS pinmux settings
Signed-off-by: Amit Shah
Signed-off-by: Amit Shah
21 Nov, 2011
1 commit
-
This patch cleans-up the driver based on internal lpr comments.
Separated board specific and SOC specific data and added to
appropriate files. Based on the EVM type it will initialize the
DCAN instanceThis patch cleans-up the driver according to Alpha EVM board
changes. Modified pinmux settings added udelay(1); for raminit.
Without this delay interrupts of the DCAN module is cleared while
first time CAN network-up.Signed-off-by: Anil Kumar Ch
18 Nov, 2011
3 commits
-
1. GPIO Keys Support Enabled for volume up/down push bottons.
2. Correction in Matrix Keypad for DB boot mode.Signed-off-by: Goutam Kumar
Signed-off-by: Hebbar, Gururaja -
This patch adds support for GPIO based Matric(2 x 3) Keypad.
Signed-off-by: Goutam Kumar
Signed-off-by: Hebbar, Gururaja -
* WLAN and Bluetooth enable pins are different between alpha(rev1.0) and
beta (rev1.1a) boards.
Use the right pin muxing based on the header read from eeprom.* Add the BT and WLAN enable pins to the wl12xx platform data so they can
be used by external modulesSigned-off-by: Eyal Reizer
16 Nov, 2011
2 commits
-
This patch adds the platform data needed by the driver. Added the
resources to the difference d_can instances.Initialization of message ram is necessary to read/write the message object
from/into the message RAMSigned-off-by: Anil Kumar Ch
-
Patch adds correct pin mux configuration for mmc1
as per beta GP EVM.Signed-off-by: Patil, Rachna
27 Oct, 2011
3 commits
-
* Pin muxing for wlan and blutooth enable pins
* Pin muxing for the wlan interrupt line
* Fix muxing mistake for gpmc_ben1 pinSigned-off-by: Eyal Reizer
-
Signed-off-by: Vaibhav Bedia
-
Signed-off-by: Afzal Mohammed
Signed-off-by: Vaibhav Hiremath