28 Nov, 2011
6 commits
-
Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2.
Update count (n_voltages) for VDD1/2.Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain
With above expr, number of voltages that can be selected is
step value count * gain countconstant for gain count will be called VDD1_2_NUM_VOLT_COARSE
existing constant for step value count is VDD1_2_NUM_VOLTS,
use VDD1_2_NUM_VOLT_FINE instead to make clear that step value
is not the only component in deciding selectable voltage countSigned-off-by: Afzal Mohammed
-
Create an array of fixed size for the platform to pass regulator
initalization data through.Passing an array of pointers to init data also allows more flexible
definition of init data as well as prevents reading past the end of the
array should the platform define an incorrectly sized array.Signed-off-by: Kyle Manna
-
Move the regulator defintions to the header so that platform board file
can use them to configure specific regulators.Signed-off-by: Kyle Manna
-
The tps65910.h file depends on linux/gpio.h. Move the include from the
source file to the tps65910.h header file.Signed-off-by: Kyle Manna
-
Add I2C slave addresses to the header file so that platform definitions
can use them.Signed-off-by: Kyle Manna
-
This patch adds support for lis33ldlh digital accelerometer to the
lis3lv02d driver family. Adds ID field for detecting the lis33ldlh
module, based on this ID field lis3lv02d driver will export the
lis33ldlh module functionality.Also exports g_range parameter to user space for run-time value
change. User must give 2/4/8 value depends on requirement.Signed-off-by: Anil Kumar Ch
21 Nov, 2011
1 commit
-
This patch cleans-up the driver based on internal lpr review comments.
Also modified the code which can be fit for both alpha and beta am335x
EVM's.Signed-off-by: Anil Kumar Ch
18 Nov, 2011
1 commit
-
* WLAN and Bluetooth enable pins are different between alpha(rev1.0) and
beta (rev1.1a) boards.
Use the right pin muxing based on the header read from eeprom.* Add the BT and WLAN enable pins to the wl12xx platform data so they can
be used by external modulesSigned-off-by: Eyal Reizer
16 Nov, 2011
1 commit
-
Bosch D_CAN controller is a full-CAN implementation which is compliant
to CAN protocol version 2.0 part A and B. Bosch D_CAN user manual can be
obtained from:http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/can/d_can_users_manual_111.pdf
This patch adds the support for this controller.
The following are the design choices made while writing the controller
driver:
1. Interface Register set IF1 has be used for transmit and IF2 is used for
receive message objects.
2. Out of the total Message objects available, half of it are kept aside for RX
purposes and the rest for TX purposes.
3. NAPI implementation is such that both the TX and RX paths functions
in polling mode.This patch adds the dcan driver support to am335x chip.
Signed-off-by: Anil Kumar Ch
15 Nov, 2011
2 commits
-
This patch adds support for pressure measurement configurations
on TSC. Along with X and Y co-ordinates pressure is also reported
to the sub-system.Signed-off-by: Patil, Rachna
-
AN1 and AN2(analog inputs to analog front end) were swapped
on alpha EVM's. This change is IP dependent, hence changes are
made in the driver to support the beta EVM.Signed-off-by: Patil, Rachna
27 Oct, 2011
7 commits
-
The initial definition of __kfree_rcu() checked a static inline function
argument to see if it was a compile-time constant. Apparently not all
compilers are willing to put up with this at all optimization levels.
Add a nasty comment and remove the warning, relying on the fact that
__kfree_rcu() is called only from kfree_rcu(), which always passes in
a compile-time constant.Signed-off-by: Paul E. McKenney
Signed-off-by: Hebbar, Gururaja -
Modified the nop driver to support multi nop transceiver.
Changes:
- Global xceiv to xceiv[2]
- nop transceiver regiser/deregiser based on musb->id
- Changes to other glue layersSigned-off-by: Ravi B
Signed-off-by: Ajay Kumar Gupta
Signed-off-by: Vaibhav Hiremath -
Current musb host driver does the giveback of completed urb first and
then start the next request. This is significantly affecting the streaming
from an USB camera wherein we observe huge delay between the two IN tokens
from musb host. This is due to the fact that UVC driver is doing decoding
and further processing in giveback context.The patch tries to defer the giveback part to a workqueue and continues
with the start of new request in completion path.Signed-off-by: Ajay Kumar Gupta
Signed-off-by: Sriramakrishnan A G
Signed-off-by: Vaibhav Hiremath -
OMAP35x han an errata restricting active endpoints to use either
first 8K or next 8K of FIFO space while this issue has been
fixed in OMAP3630.This issue requires the OMAP35x platform to use fifo_mode=5 but
OMAP3630 and AM35x can use fifo_mode=4 which utilises entire 16K
of FIFO.Signed-off-by: Ajay Kumar Gupta
Signed-off-by: Sriramakrishnan A G
Signed-off-by: Vaibhav Hiremath -
Adding member variables for USB internal LDOs in twl4030_platform_data
and registering them in twl-core.c if the variables are populated
from board-evm file.Signed-off-by: Ajay Kumar Gupta
Signed-off-by: Sriramakrishnan A G
Signed-off-by: Vaibhav Hiremath -
This patch adds all the necessary changes to
add touchscreen driver present inside am335x.
The controller is a 4/5/8 wire resistive panel that is
directly fed to the ADC.Signed-off-by: Patil, Rachna
-
This patch added to add support for CPSW driver. CPSW driver along with
CPSW ALE driver are added and also added support in Makefile and Kconfig
files.Signed-off-by: Chandan Nath
20 Oct, 2011
1 commit
-
Merge branches 'fixes-part2', 'dt-merge', 'soc', 'board' and 'testing-board' into tmp-rebuild-1319067784
06 Oct, 2011
1 commit
-
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
dm crypt: always disable discard_zeroes_data
dm: raid fix write_mostly arg validation
dm table: avoid crash if integrity profile changes
dm: flakey fix corrupt_bio_byte error path
05 Oct, 2011
3 commits
-
* git://github.com/davem330/net:
pch_gbe: Fixed the issue on which a network freezes
pch_gbe: Fixed the issue on which PC was frozen when link was downed.
make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
net: xen-netback: correctly restart Tx after a VM restore/migrate
bonding: properly stop queuing work when requested
can bcm: fix incomplete tx_setup fix
RDSRDMA: Fix cleanup of rds_iw_mr_pool
net: Documentation: Fix type of variables
ibmveth: Fix oops on request_irq failure
ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
cxgb4: Fix EEH on IBM P7IOC
can bcm: fix tx_setup off-by-one errors
MAINTAINERS: tehuti: Alexander Indenbaum's address bounces
dp83640: reduce driver noise
ptp: fix L2 event message recognition -
Add the ability to disable PCI-E MPS turning and using the BIOS
configured MPS defaults. Due to the number of issues recently
discovered on some x86 chipsets, make this the default behavior.Also, add the option for peer to peer DMA MPS configuration. Peer to
peer DMA is outside the scope of this patch, but MPS configuration could
prevent it from working by having the MPS on one root port different
than the MPS on another. To work around this, simply make the system
wide MPS the smallest possible value (128B).Signed-off-by: Jon Mason
Acked-by: Benjamin Herrenschmidt
Signed-off-by: Linus Torvalds -
Add of_property_read_string_index and of_property_count_strings
to retrieve one string inside a property that will contains
severals strings.Signed-off-by: Benoit Cousson
Acked-by: Grant Likely
Signed-off-by: Kevin Hilman
01 Oct, 2011
1 commit
-
…for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
* 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
irq: Fix check for already initialized irq_domain in irq_domain_add
irq: Add declaration of irq_domain_simple_ops to irqdomain.h* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
x86/rtc: Don't recursively acquire rtc_lock* 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
posix-cpu-timers: Cure SMP wobbles
sched: Fix up wchan borkage
sched/rt: Migrate equal priority tasks to available CPUs
30 Sep, 2011
1 commit
-
David reported:
Attached below is a watered-down version of rt/tst-cpuclock2.c from
GLIBC. Just build it with "gcc -o test test.c -lpthread -lrt" or
similar.Run it several times, and you will see cases where the main thread
will measure a process clock difference before and after the nanosleep
which is smaller than the cpu-burner thread's individual thread clock
difference. This doesn't make any sense since the cpu-burner thread
is part of the top-level process's thread group.I've reproduced this on both x86-64 and sparc64 (using both 32-bit and
64-bit binaries).For example:
[davem@boricha build-x86_64-linux]$ ./test
process: before(0.001221967) after(0.498624371) diff(497402404)
thread: before(0.000081692) after(0.498316431) diff(498234739)
self: before(0.001223521) after(0.001240219) diff(16698)
[davem@boricha build-x86_64-linux]$The diff of 'process' should always be >= the diff of 'thread'.
I make sure to wrap the 'thread' clock measurements the most tightly
around the nanosleep() call, and that the 'process' clock measurements
are the outer-most ones.---
#include
#include
#include
#include
#include
#include
#include
#includestatic pthread_barrier_t barrier;
static void *chew_cpu(void *arg)
{
pthread_barrier_wait(&barrier);
while (1)
__asm__ __volatile__("" : : : "memory");
return NULL;
}int main(void)
{
clockid_t process_clock, my_thread_clock, th_clock;
struct timespec process_before, process_after;
struct timespec me_before, me_after;
struct timespec th_before, th_after;
struct timespec sleeptime;
unsigned long diff;
pthread_t th;
int err;err = clock_getcpuclockid(0, &process_clock);
if (err)
return 1;err = pthread_getcpuclockid(pthread_self(), &my_thread_clock);
if (err)
return 1;pthread_barrier_init(&barrier, NULL, 2);
err = pthread_create(&th, NULL, chew_cpu, NULL);
if (err)
return 1;err = pthread_getcpuclockid(th, &th_clock);
if (err)
return 1;pthread_barrier_wait(&barrier);
err = clock_gettime(process_clock, &process_before);
if (err)
return 1;err = clock_gettime(my_thread_clock, &me_before);
if (err)
return 1;err = clock_gettime(th_clock, &th_before);
if (err)
return 1;sleeptime.tv_sec = 0;
sleeptime.tv_nsec = 500000000;
nanosleep(&sleeptime, NULL);err = clock_gettime(th_clock, &th_after);
if (err)
return 1;err = clock_gettime(my_thread_clock, &me_after);
if (err)
return 1;err = clock_gettime(process_clock, &process_after);
if (err)
return 1;diff = process_after.tv_nsec - process_before.tv_nsec;
printf("process: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
process_before.tv_sec, process_before.tv_nsec,
process_after.tv_sec, process_after.tv_nsec, diff);
diff = th_after.tv_nsec - th_before.tv_nsec;
printf("thread: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
th_before.tv_sec, th_before.tv_nsec,
th_after.tv_sec, th_after.tv_nsec, diff);
diff = me_after.tv_nsec - me_before.tv_nsec;
printf("self: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
me_before.tv_sec, me_before.tv_nsec,
me_after.tv_sec, me_after.tv_nsec, diff);return 0;
}This is due to us using p->se.sum_exec_runtime in
thread_group_cputime() where we iterate the thread group and sum all
data. This does not take time since the last schedule operation (tick
or otherwise) into account. We can cure this by using
task_sched_runtime() at the cost of having to take locks.This also means we can (and must) do away with
thread_group_sched_runtime() since the modified thread_group_cputime()
is now more accurate and would deadlock when called from
thread_group_sched_runtime().Aside of that it makes the function safe on 32 bit systems. The old
code added t->se.sum_exec_runtime unprotected. sum_exec_runtime is a
64bit value and could be changed on another cpu at the same time.Reported-by: David Miller
Signed-off-by: Peter Zijlstra
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1314874459.7945.22.camel@twins
Tested-by: David Miller
Signed-off-by: Thomas Gleixner
29 Sep, 2011
1 commit
-
The IEEE 1588 standard defines two kinds of messages, event and general
messages. Event messages require time stamping, and general do not. When
using UDP transport, two separate ports are used for the two message
types.The BPF designed to recognize event messages incorrectly classifies L2
general messages as event messages. This commit fixes the issue by
extending the filter to check the message type field for L2 PTP packets.
Event messages are be distinguished from general messages by testing
the "general" bit.Signed-off-by: Richard Cochran
Cc:
Signed-off-by: David S. Miller
27 Sep, 2011
2 commits
-
That flag no longer makes sense, since we don't look up automount points
as eagerly any more. Additionally, it turns out that the NO_AUTOMOUNT
handling was buggy to begin with: it would avoid automounting even for
cases where we really *needed* to do the automount handling, and could
return ENOENT for autofs entries that hadn't been instantiated yet.With our new non-eager automount semantics, one discussion has been
about adding a AT_AUTOMOUNT flag to vfs_fstatat (and thus the
newfstatat() and fstatat64() system calls), but it's probably not worth
it: you can always force at least directory automounting by simply
adding the final '/' to the filename, which works for *all* of the stat
family system calls, old and new.So AT_NO_AUTOMOUNT (and thus LOOKUP_NO_AUTOMOUNT) really were just a
result of our bad default behavior.Acked-by: Ian Kent
Acked-by: Trond Myklebust
Signed-off-by: Linus Torvalds -
Since we've now turned around and made LOOKUP_FOLLOW *not* force an
automount, we want to add the ability to force an automount event on
lookup even if we don't happen to have one of the other flags that force
it implicitly (LOOKUP_OPEN, LOOKUP_DIRECTORY, LOOKUP_PARENT..)Most cases will never want to use this, since you'd normally want to
delay automounting as long as possible, which usually implies
LOOKUP_OPEN (when we open a file or directory, we really cannot avoid
the automount any more).But Trond argued sufficiently forcefully that at a minimum bind mounting
a file and quotactl will want to force the automount lookup. Some other
cases (like nfs_follow_remote_path()) could use it too, although
LOOKUP_DIRECTORY would work there as well.This commit just adds the flag and logic, no users yet, though. It also
doesn't actually touch the LOOKUP_NO_AUTOMOUNT flag that is related, and
was made irrelevant by the same change that made us not follow on
LOOKUP_FOLLOW.Cc: Trond Myklebust
Cc: Ian Kent
Cc: Jeff Layton
Cc: Miklos Szeredi
Cc: David Howells
Cc: Al Viro
Cc: Greg KH
Signed-off-by: Linus Torvalds
26 Sep, 2011
1 commit
-
If optional discard support in dm-crypt is enabled, discards requests
bypass the crypt queue and blocks of the underlying device are discarded.
For the read path, discarded blocks are handled the same as normal
ciphertext blocks, thus decrypted.So if the underlying device announces discarded regions return zeroes,
dm-crypt must disable this flag because after decryption there is just
random noise instead of zeroes.Signed-off-by: Milan Broz
Signed-off-by: Alasdair G Kergon
23 Sep, 2011
1 commit
-
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] kvm: extension capability for new address space layout
[S390] kvm: fix address mode switching
22 Sep, 2011
1 commit
-
* 'for-linus' of git://git.kernel.dk/linux-block:
floppy: use del_timer_sync() in init cleanup
blk-cgroup: be able to remove the record of unplugged device
block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request
mm: Add comment explaining task state setting in bdi_forker_thread()
mm: Cleanup clearing of BDI_pending bit in bdi_forker_thread()
block: simplify force plug flush code a little bit
block: change force plug flush call order
block: Fix queue_flag update when rq_affinity goes from 2 to 1
block: separate priority boosting from REQ_META
block: remove READ_META and WRITE_META
xen-blkback: fixed indentation and comments
xen-blkback: Don't disconnect backend until state switched to XenbusStateClosed.
20 Sep, 2011
2 commits
-
598841ca9919d008b520114d8a4378c4ce4e40a1 ([S390] use gmap address
spaces for kvm guest images) changed kvm on s390 to use a separate
address space for kvm guests. We can now put KVM guests anywhere
in the user address mode with a size up to 8PB - as long as the
memory is 1MB-aligned. This change was done without KVM extension
capability bit.
The change was added after 3.0, but we still have a chance to add
a feature bit before 3.1 (keeping the releases in a sane state).
We use number 71 to avoid collisions with other pending kvm patches
as requested by Alexander Graf.Signed-off-by: Christian Borntraeger
Acked-by: Avi Kivity
Cc: Alexander Graf
Signed-off-by: Heiko Carstens -
irq_domain_simple_ops is exported, but is not declared in irqdomain.h,
so add it.Signed-off-by: Rob Herring
Cc: Grant Likely
Cc: marc.zyngier@arm.com
Cc: thomas.abraham@linaro.org
Cc: jamie@jamieiles.com
Cc: b-cousson@ti.com
Cc: shawn.guo@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1316017900-19918-2-git-send-email-robherring2@gmail.com
Signed-off-by: Thomas Gleixner
19 Sep, 2011
2 commits
-
* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6:
mfd: Fix omap-usb-host build failure
mfd: Make omap-usb-host TLL mode work again
mfd: Set MAX8997 irq pointer
mfd: Fix initialisation of tps65910 interrupts
mfd: Check for twl4030-madc NULL pointer
mfd: Copy the device pointer to the twl4030-madc structure
mfd: Rename wm8350 static gpio_set_debounce()
mfd: Fix value of WM8994_CONFIGURE_GPIO -
* git://github.com/davem330/net: (62 commits)
ipv6: don't use inetpeer to store metrics for routes.
can: ti_hecc: include linux/io.h
IRDA: Fix global type conflicts in net/irda/irsysctl.c v2
net: Handle different key sizes between address families in flow cache
net: Align AF-specific flowi structs to long
ipv4: Fix fib_info->fib_metrics leak
caif: fix a potential NULL dereference
sctp: deal with multiple COOKIE_ECHO chunks
ibmveth: Fix checksum offload failure handling
ibmveth: Checksum offload is always disabled
ibmveth: Fix issue with DMA mapping failure
ibmveth: Fix DMA unmap error
pch_gbe: support ML7831 IOH
pch_gbe: added the process of FIFO over run error
pch_gbe: fixed the issue which receives an unnecessary packet.
sfc: Use 64-bit writes for TX push where possible
Revert "sfc: Use write-combining to reduce TX latency" and follow-ups
bnx2x: Fix ethtool advertisement
bnx2x: Fix 578xx link LED
bnx2x: Fix XMAC loopback test
...
16 Sep, 2011
3 commits
-
dev_forward_skb loops an skb back into host networking
stack which might hang on the memory indefinitely.
In particular, this can happen in macvtap in bridged mode.
Copy the userspace fragments to avoid blocking the
sender in that case.As this patch makes skb_copy_ubufs extern now,
I also added some documentation and made it clear
the SKBTX_DEV_ZEROCOPY flag automatically instead
of doing it in all callers. This can be made into a separate
patch if people feel it's worth it.Signed-off-by: Michael S. Tsirkin
Signed-off-by: David S. Miller -
"Possible SYN flooding on port xxxx " messages can fill logs on servers.
Change logic to log the message only once per listener, and add two new
SNMP counters to track :TCPReqQFullDoCookies : number of times a SYNCOOKIE was replied to client
TCPReqQFullDrop : number of times a SYN request was dropped because
syncookies were not enabled.Based on a prior patch from Tom Herbert, and suggestions from David.
Signed-off-by: Eric Dumazet
CC: Tom Herbert
Signed-off-by: David S. Miller
15 Sep, 2011
2 commits
-
Building a kernel with hotplug disabled results in a link failure:
`bgpio_remove' referenced in section `___ksymtab_gpl+bgpio_remove' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
This is because of bgpio_remove() is exported. It is illegal to export
symbols which are discarded either at link time or as part of an
init/exit section.Fix this by dropping the __devexit attributation from bgpio_remove().
Also drop the __devinit attributation from bgpio_init().Signed-off-by: Russell King
Cc: Grant Likely
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Revert the post-3.0 commit 82f9d486e59f5 ("memcg: add
memory.vmscan_stat").The implementation of per-memcg reclaim statistics violates how memcg
hierarchies usually behave: hierarchically.The reclaim statistics are accounted to child memcgs and the parent
hitting the limit, but not to hierarchy levels in between. Usually,
hierarchical statistics are perfectly recursive, with each level
representing the sum of itself and all its children.Since this exports statistics to userspace, this may lead to confusion
and problems with changing things after the release, so revert it now,
we can try again later.Signed-off-by: Johannes Weiner
Acked-by: KAMEZAWA Hiroyuki
Cc: Daisuke Nishimura
Cc: Michal Hocko
Cc: Ying Han
Cc: Balbir Singh
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
