26 Aug, 2011

2 commits


30 Jul, 2011

2 commits

  • * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
    kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()
    xconfig: Abort close if configuration cannot be saved
    kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h
    kconfig/nconf: remove useless conditionnal
    kconfig/nconf: prevent segfault on empty menu
    kconfig/nconf: use the generic menu_get_ext_help()
    nconfig: Avoid Wunused-but-set warning
    kconfig/conf: mark xfgets() private
    kconfig: remove pending prototypes for kconfig_load()
    kconfig/conf: add command line options' description
    kconfig/conf: reduce the scope of `defconfig_file'
    kconfig: use calloc() for expr allocation
    kconfig: introduce specialized printer
    kconfig: do not overwrite symbol direct dependency in assignment
    kconfig/gconf: silent missing prototype warnings
    kconfig/gconf: kill deadcode
    kconfig: nuke LKC_DIRECT_LINK cruft
    kconfig: nuke reference to SWIG
    kconfig: add missing inclusion
    kconfig: add missing inclusion
    ...

    Fix up conflicts in scripts/kconfig/Makefile

    Linus Torvalds
     
  • Replace the config_is_*() macros with a variant that allows for grepping
    for usage of CONFIG_* options in the code. Usage:

    if (IS_ENABLED(CONFIG_NUMA))

    or

    #if IS_ENABLED(CONFIG_NUMA)

    The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
    or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
    the option is 'm'. Only boolean and tristate options are supported.

    Reviewed-by: Arnaud Lacombe
    Acked-by: Randy Dunlap
    Signed-off-by: Michal Marek

    Michal Marek
     

26 Jul, 2011

11 commits

  • * Merge akpm patch series: (122 commits)
    drivers/connector/cn_proc.c: remove unused local
    Documentation/SubmitChecklist: add RCU debug config options
    reiserfs: use hweight_long()
    reiserfs: use proper little-endian bitops
    pnpacpi: register disabled resources
    drivers/rtc/rtc-tegra.c: properly initialize spinlock
    drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
    drivers/rtc: add support for Qualcomm PMIC8xxx RTC
    drivers/rtc/rtc-s3c.c: support clock gating
    drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
    init: skip calibration delay if previously done
    misc/eeprom: add eeprom access driver for digsy_mtc board
    misc/eeprom: add driver for microwire 93xx46 EEPROMs
    checkpatch.pl: update $logFunctions
    checkpatch: make utf-8 test --strict
    checkpatch.pl: add ability to ignore various messages
    checkpatch: add a "prefer __aligned" check
    checkpatch: validate signature styles and To: and Cc: lines
    checkpatch: add __rcu as a sparse modifier
    checkpatch: suggest using min_t or max_t
    ...

    Did this as a merge because of (trivial) conflicts in
    - Documentation/feature-removal-schedule.txt
    - arch/xtensa/include/asm/uaccess.h
    that were just easier to fix up in the merge than in the patch series.

    Linus Torvalds
     
  • Previous behavior allowed only alphabetic prefixes like pr_info to exceed
    the 80 column line length limit.

    ath6kl wants to add a digit into the prefix, so allow numbers as well as
    digits in the _ printks.

    __ratelimited and __once and WARN_RATELIMIT
    and WARN_ONCE may now exceed 80 cols.

    Add missing _printk type for completeness.

    Signed-off-by: Joe Perches
    Cc: Andy Whitcroft
    Cc: Kalle Valo
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Joe Perches
     
  • Some patches are sent in using ISO-8859 or even Windows codepage 1252.

    Make checkpatch accept these by default and only emit the "Invalid UTF-8"
    message when using --strict.

    Signed-off-by: Joe Perches
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Joe Perches
     
  • Some users would like the ability to not emit some of the messages that
    checkpatch produces. This can make it easier to use checkpatch in other
    projects and integrate into scm hook scripts.

    Add command line option to "--ignore" various message types. Add option
    --show-types to emit the "type" of each message. Categorize all ERROR,
    WARN and CHK messages with types.

    Add optional .checkpatch.conf file to store default options.
    3 paths are searched for .checkpatch.conf
    . customized per-tree configurations
    $HOME user global configuration when per-tree configs don't exist
    ./scripts lk defaults to override script
    The .conf file can contain any valid command-line argument and
    the contents are prepended to any additional command line arguments.
    Multiple lines may be used, blank lines are ignored, # is a comment.

    Update "false positive" output for readability.

    Update version to 0.32

    Signed-off-by: Joe Perches
    Acked-by: Mike Frysinger
    Cc: Andy Whitcroft
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Joe Perches
     
  • Prefer the use of __aligned(size) over __attribute__((__aligned___(size)))

    Link: http://lkml.kernel.org/r/20110609094526.1571774c.akpm@linux-foundation.org

    Suggested-by: Andrew Morton
    Signed-off-by: Joe Perches
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Joe Perches
     
  • Signatures have many forms and can sometimes cause problems if not in the
    correct format when using git send-email or quilt.

    Try to verify the signature tags and email addresses to use the generally
    accepted "Signed-off-by: Full Name " form.

    Original idea by Anish Kumar

    Signed-off-by: Joe Perches
    Cc: Anish Kumar
    Cc: Nick Bowler
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Joe Perches
     
  • Fix "need consistent spacing around '*'" error after a __rcu sparse
    annotation which was caused by the missing __rcu entry in the
    checkpatch.pl internal list of sparse keywords.

    Signed-off-by: Sven Eckelmann
    Cc: Andy Whitcroft
    Cc: Joe Perches
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Sven Eckelmann
     
  • A common issue with min() or max() is using a cast on one or both of the
    arguments when using min_t/max_t could be better.

    Add cast detection to uses of min/max and suggest an appropriate use of
    min_t or max_t instead.

    Caveat: This only works for min() or max() on a single line.
    It does not find min() or max() split across multiple lines.

    This does find:
    min((u32)foo, bar);
    But it does not find:
    max((unsigned long)foo,
    bar);

    Suggested-by: Andrew Morton
    Signed-off-by: Joe Perches
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Joe Perches
     
  • Entries that used formats other than "Proper Name "
    were not parsed properly.

    Try to improve the parsing so that the entries in the forms of:
    Proper Name
    and
    Proper Name Commit Name
    are transformed correctly.

    Signed-off-by: Joe Perches
    Reviewed-by: Florian Mickler
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Joe Perches
     
  • …linux/kernel/git/mmarek/kbuild-2.6

    * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
    genksyms: Use same type in loop comparison
    kbuild: silence generated makefile message
    kernel: prevent unnecessary rebuilding due to config_data.gz
    headers_install: fix __packed in exported kernel headers
    dtc: regen parser
    dtc: migrate parser to implicit rules
    kconfig: regen parser
    kconfig: migrate parser to implicit rules
    kconfig/zconf.l: do not ask to generate backup
    kconfig: kill no longer needed reference to YYDEBUG
    kconfig: constify `kconf_id_lookup'
    genksym: regen parser
    genksyms: migrate parser to implicit rules
    genksyms: drop -Wno-uninitialized from HOSTCFLAGS_parse.tab.o
    genksyms: pass hash and lookup functions name and target language though the input file
    kbuild: simplify the %_shipped rule
    kbuild: add implicit rules for parser generation
    kbuild: add `baseprereq'
    kbuild: Fix reference to vermagic.h

    * 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
    package: Makefile: fix perf target bug

    * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
    gitignore: ignore debian build directory

    Linus Torvalds
     
  • * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
    fs: Merge split strings
    treewide: fix potentially dangerous trailing ';' in #defined values/expressions
    uwb: Fix misspelling of neighbourhood in comment
    net, netfilter: Remove redundant goto in ebt_ulog_packet
    trivial: don't touch files that are removed in the staging tree
    lib/vsprintf: replace link to Draft by final RFC number
    doc: Kconfig: `to be' -> `be'
    doc: Kconfig: Typo: square -> squared
    doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
    drivers/net: static should be at beginning of declaration
    drivers/media: static should be at beginning of declaration
    drivers/i2c: static should be at beginning of declaration
    XTENSA: static should be at beginning of declaration
    SH: static should be at beginning of declaration
    MIPS: static should be at beginning of declaration
    ARM: static should be at beginning of declaration
    rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
    Update my e-mail address
    PCIe ASPM: forcedly -> forcibly
    gma500: push through device driver tree
    ...

    Fix up trivial conflicts:
    - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
    - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
    - drivers/net/r8169.c (just context changes)

    Linus Torvalds
     

25 Jul, 2011

2 commits

  • Give the user an opportunity to fix the error or save the configuration
    under a different path.

    Reported-by: Hiromu Yakura
    Signed-off-by: Michal Marek

    Michal Marek
     
  • The ARRAY_SIZE macro in scripts/genksyms/genksyms.c returns a value of
    type size_t. That value is being compared to a variable of type int in
    a loop in read_node(). Change the int variable to size_t type as well,
    so we don't do signed vs unsigned type comparisons with all the
    potential promotion/sign extension trouble that can cause (also
    silences compiler warnings at high levels of warnings).

    Signed-off-by: Jesper Juhl
    Signed-off-by: Michal Marek

    Jesper Juhl
     

24 Jul, 2011

1 commit

  • The commit f02e8a6 sorts symbols placing each of them in its own elf section.
    The sorting and merging into the canonical sections are done by the linker.
    Unfortunately modpost to generate Module.symvers file parses vmlinux
    (already linked) and all modules object files (which aren't linked yet).
    These aren't sanitized by the linker yet. That breaks modpost that can't
    detect license properly for modules. This patch makes modpost aware of
    the new exported symbols structure.

    Thanks to Arnaud Lacombe and Anders Kaseorg
    for providing useful suggestions about code.

    This work was supported by a hardware donation from the CE Linux Forum.

    Reported-by: Jan Beulich
    Signed-off-by: Alessio Igor Bogani
    Signed-off-by: Rusty Russell

    Alessio Igor Bogani
     

20 Jul, 2011

1 commit


18 Jul, 2011

1 commit

  • The specialized printer for headers (espectially autoconf.h) is missing
    fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
    warn for such missing prefix, this code is needed. Fix this.

    In the same time, fix some nits in `header_print_symbol()'.

    Cc: Randy Dunlap
    Cc: Mauro Carvalho Chehab

    Broken-by: Arnaud Lacombe
    Reported-by: Randy Dunlap
    Reported-by: Mauro Carvalho Chehab
    Acked-by: Mauro Carvalho Chehab
    Acked-by: Randy Dunlap
    Signed-off-by: Arnaud Lacombe
    Signed-off-by: Michal Marek

    Arnaud Lacombe
     

14 Jul, 2011

1 commit


13 Jul, 2011

4 commits

  • After the test

    if (!submenu || ...)
    continue;

    the variable `submenu' can _not_ be NULL, so do not test for this
    situation.

    Cc: Nir Tzachar
    Signed-off-by: Arnaud Lacombe
    Signed-off-by: Michal Marek

    Arnaud Lacombe
     
  • nconf does not check the validity of the current menu when help is
    requested (with either , '?' or 'h'). This leads to a NULL pointer
    dereference when an empty menu is encountered.

    The following reduced testcase exposes the problem:

    config DEP
    bool

    menu "FOO"

    config BAR
    bool "BAR"
    depends on DEP

    endmenu

    Issue will happen when entering menu "FOO" and requesting help.

    nconf is the only front-end which do not filter the validity of the
    current menu. Such filter can not really happen beforehand as other key
    which does not deals with the current menu might be entered by the user,
    so just bails out earlier if we encounter an invalid menu.

    Cc: Nir Tzachar
    Cc: Andrej Gelenberg
    Reported-by: Andrej Gelenberg
    Signed-off-by: Arnaud Lacombe
    Signed-off-by: Michal Marek

    Arnaud Lacombe
     
  • nconf is the only front-end which does not use this helper, but prefer
    to copy/paste the code. The test wrt. menu validity added in this
    version of the code is bogus anyway as an invalid menu will get
    dereferenced a few line below by calling menu_get_prompt().

    For now, convert nconf to use menu_get_ext_help(), as do every other
    front-end. We will deals with menu validity checks properly in a
    separate commit.

    Cc: Nir Tzachar
    Cc: Andrej Gelenberg
    Signed-off-by: Arnaud Lacombe
    Signed-off-by: Michal Marek

    Arnaud Lacombe
     
  • I am seeing Wunused-but-set warning while make nconfig. Looks like
    active_menu is not used. Removing it fixes the warning.

    Signed-off-by: Raghavendra D Prabhu
    Acked-by: WANG Cong
    Signed-off-by: Michal Marek

    Raghavendra D Prabhu
     

12 Jul, 2011

1 commit


11 Jul, 2011

1 commit


04 Jul, 2011

1 commit


02 Jul, 2011

5 commits


01 Jul, 2011

1 commit

  • Make conf_write_symbol() grammar agnostic to be able to use it from different
    code path. These path pass a printer callback which will print a symbol's name
    and its value in different format.

    conf_write_symbol()'s job become mostly only to prepare a string for the
    printer. This avoid to have to pass specialized flag to generic
    functions

    Signed-off-by: Arnaud Lacombe
    [mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
    macro)]
    Signed-off-by: Michal Marek

    Arnaud Lacombe
     

24 Jun, 2011

4 commits

  • Considering the following configuration:

    config F
    bool "F"

    choice AB
    bool "AB"
    config A
    bool "A"
    config B
    bool "B"
    endchoice

    if A
    config D
    bool
    default y if F
    select E
    config E
    bool "E"
    endif

    if B
    config D
    bool
    default y if F
    select E
    config E
    bool "E"
    endif

    The following configuration:

    CONFIG_F=y
    CONFIG_A=y
    # CONFIG_B is not set
    CONFIG_D=y
    CONFIG_E=y

    emits a spurious warning:

    (D) selects E which has unmet direct dependencies (B)

    If a symbol appears in two different branch of the tree, it should inherit the
    dependency of both parent, not just the last one.

    Reported-by: Yann E. Morin
    Tested-by: Yann E. Morin
    Signed-off-by: Arnaud Lacombe
    Signed-off-by: Michal Marek

    Arnaud Lacombe
     
  • checkpatch.pl warns about using __attribute__((packed)) in kernel
    headers: "__packed is preferred over __attribute__((packed))". If one
    follows that advice it could cause problems in the exported header
    files, because the outside world doesn't know about this shortcut.

    For example busybox will fail to compile:
    CC miscutils/ubi_attach_detach.o
    In file included from miscutils/ubi_attach_detach.c:27:0:
    /usr/include/mtd/ubi-user.h:330:3: error: conflicting types for ‘__packed’
    /usr/include/mtd/ubi-user.h:314:3: note: previous declaration of ‘__packed’ was here
    ...

    Fix the problem by substituting __packed with __attribute__((packed)) in
    the header_install.pl script.

    Cc: Artem Bityutskiy
    CC: Joe Perches
    Signed-off-by: Markus Trippelsdorf
    Signed-off-by: Michal Marek

    Markus Trippelsdorf
     
  • Specify --git-dir when building perf targets to allow out-of-tree
    builds using O=.

    The shell command in `git archive' had to be modified to allow proper
    file name expansion of the files listed in MANIFEST.

    Signed-off-by: matt mooney
    Signed-off-by: Michal Marek

    matt mooney
     
  • Michal Marek
     

17 Jun, 2011

1 commit

  • The placement of the opening brace "{" after 'if' statements in
    scripts/docproc.c is inconsistent. Most are placed on the same line as the 'if'
    statement itself as per CodingStyle, but a few are not. This patch cleans up
    the inconsistency. We save a few source lines and the file then uses the same
    style throughout, which is nice.

    Signed-off-by: Jesper Juhl
    Signed-off-by: Jiri Kosina

    Jesper Juhl
     

16 Jun, 2011

1 commit