21 Aug, 2010
1 commit
-
This list moved to lists.ozlabs.org quite some time ago.
Signed-off-by: Stephen Rothwell
Signed-off-by: Linus Torvalds
17 Aug, 2010
1 commit
-
Marvell and GPIO bindings live in their own files, so the TOC should not
mention them.Also fix chapters numbering.
Signed-off-by: Anton Vorontsov
Signed-off-by: Grant Likely
11 Aug, 2010
1 commit
-
Signed-off-by: Roy Zang
Cc: Jerry Huang
Cc: Benjamin Herrenschmidt
Cc: Kumar Gala
Cc: Grant Likely
Cc:
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
06 Aug, 2010
1 commit
-
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits)
powerpc/8xx: Add support for the MPC8xx based boards from TQC
powerpc/85xx: Introduce support for the Freescale P1022DS reference board
powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board
powerpc/85xx: Change deprecated binding for 85xx-based boards
powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge
powerpc/tqm85xx: update PCI interrupt-map attribute
powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale
powerpc/fsl_pci: add quirk for mpc8308 pcie bridge
powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards
powerpc/85xx: Fix booting for P1021MDS boards
powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards
powerpc/85xx: kexec for SMP 85xx BookE systems
powerpc/5200/i2c: improve i2c bus error recovery
of/xilinxfb: update tft compatible versions
powerpc/fsl-diu-fb: Support setting display mode using EDID
powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings
powerpc/5121: shared DIU framebuffer support
powerpc/5121: move fsl-diu-fb.h to include/linux
powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor
powerpc/512x: add clock structure for Video-IN (VIU) unit
...
04 Aug, 2010
1 commit
-
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.Signed-off-by: Justin P. Mattock
Signed-off-by: Thomas Weber
Signed-off-by: Mike Frysinger
Cc: Paulo Marques
Cc: Randy Dunlap
Cc: Michael Neuling
Signed-off-by: Jiri Kosina
02 Aug, 2010
3 commits
-
This patch improves the recovery of the MPC's I2C bus from errors like bus
hangs resulting in timeouts:
1. make the bus timeout configurable, as it depends on the bus clock and
the attached slave chip(s); default is still 1 second;
2. detect any of the cases indicated by the CF, BB and RXAK MSR flags if a
timeout occurs, and add a missing (required) MAL reset;
3. use a more reliable method to fixup the bus if a hang has been detected.
The sequence is sent 9 times which seems to be necessary if a slave
"misses" more than one clock cycle. For 400 kHz bus speed, the fixup is
also ~70us (81us vs. 150us) faster.Tested on a custom Lite5200b derived board, with a Dallas RTC, AD sensors
and NXP IO expander chips attached to the i2c.Changes vs. v1:
- use improved bus fixup sequence for all chips (not only the 5200)
- calculate real clock from defaults if no clock is given in the device tree
- better description (I hope) of the changes.I didn't split the changes in this file into three parts as recommended by
Grant, as they actually belong together (i.e. they address one single
problem, just in three places of one single source file).Signed-off-by: Albrecht Dreß
[grant.likely@secretlab.ca: fixup for ->node to ->dev.of_node transition]
Signed-off-by: Grant Likely -
Adds support for encoding display mode information
in the device tree using verbatim EDID block.If the EDID entry in the DIU node is present, the
driver will build mode database using EDID data
and allow setting the display modes from this database.
Otherwise display mode will be set using mode
entries from driver's internal database as usual.This patch also updates device tree bindings.
Signed-off-by: Anatolij Gustschin
Acked-by: Timur Tabi
Signed-off-by: Grant Likely -
Update compatible and interrupt properties description.
Furthermore an example for the MPC5121 has been added.Signed-off-by: Anatolij Gustschin
Acked-by: Timur Tabi
Signed-off-by: Grant Likely
22 May, 2010
1 commit
-
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits)
powerpc: Remove unused 'protect4gb' boot parameter
powerpc: Build-in e1000e for pseries & ppc64_defconfig
powerpc/pseries: Make request_ras_irqs() available to other pseries code
powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity
powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim
powerpc: Use smt_snooze_delay=-1 to always busy loop
powerpc: Remove check of ibm,smt-snooze-delay OF property
powerpc/kdump: Fix race in kdump shutdown
powerpc/kexec: Fix race in kexec shutdown
powerpc/kexec: Speedup kexec hash PTE tear down
powerpc/pseries: Add hcall to read 4 ptes at a time in real mode
powerpc: Use more accurate limit for first segment memory allocations
powerpc/kdump: Use chip->shutdown to disable IRQs
powerpc/kdump: CPUs assume the context of the oopsing CPU
powerpc/crashdump: Do not fail on NULL pointer dereferencing
powerpc/eeh: Fix oops when probing in early boot
powerpc/pci: Check devices status property when scanning OF tree
powerpc/vio: Switch VIO Bus PM to use generic helpers
powerpc: Avoid bad relocations in iSeries code
powerpc: Use common cpu_die (fixes SMP+SUSPEND build)
...
17 May, 2010
1 commit
-
Signed-off-by: Peter Korsgaard
Acked-by: Anton Vorontsov
Signed-off-by: Kumar Gala
06 May, 2010
1 commit
-
By setting "reset_type" to one of the following values, the default
software reset mechanism may be overidden. Here the possible values of
"reset_type":1 - PPC4xx core reset
2 - PPC4xx chip reset
3 - PPC4xx system reset (default)This will be used by a new PPC440SPe board port, which needs a "chip
reset" instead of the default "system reset" to be asserted.Signed-off-by: Stefan Roese
Cc: Josh Boyer
Cc: Benjamin Herrenschmidt
Acked-by: Josh Boyer
Signed-off-by: Josh Boyer
23 Apr, 2010
2 commits
-
Fix obvious cases of "it's" being used when "its" was meant.
Signed-off-by: Francis Galiegue
Acked-by: Randy Dunlap
Signed-off-by: Jiri Kosina
29 Mar, 2010
1 commit
-
Signed-off-by: Gilles Espinasse
Signed-off-by: Jiri Kosina
27 Mar, 2010
1 commit
-
Define a binding for embedding a QE firmware blob into the device tree. Also
define a new property for the QE node that links to a firmware node.Signed-off-by: Timur Tabi
Signed-off-by: Grant Likely
08 Mar, 2010
1 commit
-
This patch adds the MPC5121 to the list of supported devices,
enhances the doc of the "clock-frequency" property and removes
the obsolete "cell-index", "device_type" and "fsl-i2c" property.
Furthermore an example for the MPC5121 has been added.Signed-off-by: Wolfgang Grandegger
Reviewed-by: Wolfram Sang
Signed-off-by: Ben Dooks
05 Mar, 2010
1 commit
-
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (28 commits)
ioat: cleanup ->timer_fn() and ->cleanup_fn() prototypes
ioat3: interrupt coalescing
ioat: close potential BUG_ON race in the descriptor cleanup path
ioat2: kill pending flag
ioat3: use ioat2_quiesce()
ioat3: cleanup, don't enable DCA completion writes
DMAENGINE: COH 901 318 lli sg offset fix
DMAENGINE: COH 901 318 configure channel direction
DMAENGINE: COH 901 318 remove irq counting
DMAENGINE: COH 901 318 descriptor pool refactoring
DMAENGINE: COH 901 318 cleanups
dma: Add MPC512x DMA driver
Debugging options for the DMA engine subsystem
iop-adma: redundant/wrong tests in iop_*_count()?
dmatest: fix handling of an even number of xor_sources
dmatest: correct raid6 PQ test
fsldma: Fix cookie issues
fsldma: Fix cookie issues
dma: cases IPU_PIX_FMT_BGRA32, BGR32 and ABGR32 are the same in ipu_ch_param_set_size()
dma: make Open Firmware device id constant
...
01 Mar, 2010
1 commit
-
Conflicts:
drivers/firmware/iscsi_ibft.c
19 Feb, 2010
1 commit
17 Feb, 2010
3 commits
-
Added devicetree binding documentation for gpios used as chipselect. The
code to evaluate these is already present in spi_mpc8xxx.c.Signed-off-by: Ernst Schwab
Reviewed-by: Wolfram Sang
Signed-off-by: Grant Likely -
Support for MPC5121 PSC UART in the mpc52xx_uart driver
added new DTS properties for FSL MPC5121 PSC FIFO Controller.
Provide documentation of the new properties and some examples.Signed-off-by: Anatolij Gustschin
Acked-by: Greg Kroah-Hartman
Signed-off-by: Grant Likely -
powerpc: Extended ptrace interface
From: Dave Kleikamp
Based on patches originally written by Torez Smith.
Add a new extended ptrace interface so that user-space has a single
interface for powerpc, without having to know the specific layout
of the debug registers.Implement:
PPC_PTRACE_GETHWDEBUGINFO
PPC_PTRACE_SETHWDEBUG
PPC_PTRACE_DELHWDEBUGSigned-off-by: Dave Kleikamp
Acked-by: David Gibson
Cc: Torez Smith
Cc: Benjamin Herrenschmidt
Cc: Josh Boyer
Cc: Kumar Gala
Cc: Sergio Durigan Junior
Cc: Thiago Jung Bauermann
Cc: linuxppc-dev list
Signed-off-by: Benjamin Herrenschmidt
03 Feb, 2010
1 commit
-
The IRQ probing is needlessly complex. All off the 83xx device trees in
arch/powerpc/boot/dts/ specify 5 interrupts per DMA controller: one for the
controller, and one for each channel. These interrupts are all attached to
the same IRQ line.This causes an interesting situation if two channels interrupt at the same
time. The per-controller handler will handle the first channel, and the
per-channel handler will handle the remaining channels.Instead of this mess, we fix the bug in the per-controller handler, and
make it handle all channels that generated an interrupt. When a
per-controller handler is specified in the device tree, we prefer to use
the shared handler instead of the per-channel handler.The 85xx/86xx controllers do not have a per-controller interrupt, and
instead use a per-channel interrupt. This behavior has not been changed.Signed-off-by: Ira W. Snyder
Signed-off-by: Dan Williams
08 Jan, 2010
1 commit
-
This patch adds documentation for the MSCAN OF device bindings for
the MPC512x and moves the one for the MPC5200 to the new common file
"Documentation/powerpc/dts-bindings/fsl/can.txt".Signed-off-by: Wolfgang Grandegger
Reviewed-by: Wolfram Sang
Signed-off-by: David S. Miller
21 Dec, 2009
1 commit
17 Dec, 2009
2 commits
-
* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
powerpc: fix up for mmu_mapin_ram api change
powerpc: wii: allow ioremap within the memory hole
powerpc: allow ioremap within reserved memory regions
wii: use both mem1 and mem2 as ram
wii: bootwrapper: add fixup to calc useable mem2
powerpc: gamecube/wii: early debugging using usbgecko
powerpc: reserve fixmap entries for early debug
powerpc: wii: default config
powerpc: wii: platform support
powerpc: wii: hollywood interrupt controller support
powerpc: broadway processor support
powerpc: wii: bootwrapper bits
powerpc: wii: device tree
powerpc: gamecube: default config
powerpc: gamecube: platform support
powerpc: gamecube/wii: flipper interrupt controller support
powerpc: gamecube/wii: udbg support for usbgecko
powerpc: gamecube/wii: do not include PCI support
powerpc: gamecube/wii: declare as non-coherent platforms
powerpc: gamecube/wii: introduce GAMECUBE_COMMON
...Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c.
Hopefully even close to correctly.
-
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
ppc440spe-adma: adds updated ppc440spe adma driver
iop-adma.c: use resource_size()
dmaengine: clarify the meaning of the DMA_CTRL_ACK flag
sh: stylistic improvements for the DMA driver
dmaengine: fix dmatest to verify minimum transfer length and test buffer size
sh: DMA driver has to specify its alignment requirements
Add COH 901 318 DMA block driver v5
13 Dec, 2009
3 commits
-
Add a device tree source file for the Nintendo Wii video game console.
Signed-off-by: Albert Herranz
Acked-by: Segher Boessenkool
Acked-by: Benjamin Herrenschmidt
Signed-off-by: Grant Likely -
Add a device tree source file for the Nintendo GameCube video game console.
Signed-off-by: Albert Herranz
Acked-by: Segher Boessenkool
Signed-off-by: Grant Likely -
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
MAINTAINERS: Add PowerPC patterns
powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
powerpc: Make "intspec" pointers in irq_host->xlate() const
powerpc/8xx: DTLB Miss cleanup
powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
powerpc/8xx: Start using dcbX instructions in various copy routines
powerpc/8xx: Restore _PAGE_WRITETHRU
powerpc/8xx: Add missing Guarded setting in DTLB Error.
powerpc/8xx: Fixup DAR from buggy dcbX instructions.
powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
powerpc/8xx: Invalidate non present TLBs
powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
pseries/pseries: Add code to online/offline CPUs of a DLPAR node
powerpc: stop_this_cpu: remove the cpu from the online map.
powerpc/pseries: Add kernel based CPU DLPAR handling
sysfs/cpu: Add probe/release files
powerpc/pseries: Kernel DLPAR Infrastructure
...
12 Dec, 2009
2 commits
-
This patch adds new version of the PPC440SPe ADMA driver.
Signed-off-by: Yuri Tikhonov
Signed-off-by: Anatolij Gustschin
Signed-off-by: Dan Williams -
Add bus glue driver for Xilinx USB host controller. The controller can be
configured as HS only or HS/FS hybrid. The driver uses the device tree file
to configure the driver according to the setting in the hardware system.This driver has been tested with usbtest using the NET2280 PCI card.
Signed-off-by: Julie Zhu
Signed-off-by: John Linn
Acked-by: Grant Likely
Signed-off-by: Greg Kroah-Hartman
10 Dec, 2009
1 commit
-
Signed-off-by: Sebastian Andrzej Siewior
Signed-off-by: Kumar Gala
09 Dec, 2009
2 commits
-
Conflicts:
include/linux/kvm.h
17 Nov, 2009
1 commit
-
Signed-off-by: Wolfram Sang
Cc: devicetree-discuss@ozlabs.org
Signed-off-by: David S. Miller
14 Nov, 2009
2 commits
-
Taken from socketcan-svn, fixed remaining todos, cleaned up, tested with a
phyCORE-MPC5200B-IO and a custom board.Signed-off-by: Wolfram Sang
Cc: Wolfgang Grandegger
Cc: Grant Likely
Cc: David Miller
Signed-off-by: David S. Miller -
Add the "fsl,wdt-on-boot" OF property as to reserve a GPT as WDT which may
be a requirement in safety-related (e.g. ISO/EN 61508) applications.Signed-off-by: Albrecht Dreß
Signed-off-by: Grant Likely
12 Nov, 2009
1 commit
-
This patch adds needed nodes and properties to support suspend/resume
on the MPC8610HPCD boards.There is a dedicated switch (SW9) that is used to wake up the boards.
By default the SW9 button is routed to IRQ8, but could be re-routed
(via PIXIS) to sreset.With 'no_console_suspend' kernel command line argument specified, the
board is also able to wakeup upon serial port input.Signed-off-by: Anton Vorontsov
Acked-by: Scott Wood [dts]
Signed-off-by: Kumar Gala
24 Sep, 2009
1 commit
-
* git://git.infradead.org/mtd-2.6: (58 commits)
mtd: jedec_probe: add PSD4256G6V id
mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
m25p80: Add Spansion S25FL129P serial flashes
jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
mtd: sh_flctl: register sh_flctl using platform_driver_probe()
mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
mtd: nand: fix tmio_nand ecc correction
mtd: nand: add __nand_correct_data helper function
mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
mtd: inftl: fix fold chain block number
mtd: jedec: fix compilation problem with I28F640C3B definition
mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
mtd: ofpart: Check availability of reg property instead of name property
driver/Makefile: Initialize "mtd" and "spi" before "net"
mtd: omap: adding DMA mode support in nand prefetch/post-write
mtd: omap: add support for nand prefetch-read and post-write
mtd: add nand support for w90p910 (v2)
mtd: maps: add mtd-ram support to physmap_of
mtd: pxa3xx_nand: add single-bit error corrections reporting
...