Eric Lee / linux-smarc-t335x-v3.2

10 Jun, 2011

1 commit

  • 3733e424c   ALSA: Use KBUILD_MODNAME for pci_driver.name entries ... Browse Code »

    The convention for pci_driver.name entry in kernel drivers seem to be
    the module name or equivalent ones. But, so far, almost all PCI sound
    drivers use more verbose name like "ABC Xyz (12)", and these are fairly
    confusing when appearing as a file name.

    This patch converts the all pci_driver.name entries in sound/pci/* to
    use KBUILD_MODNAME for more unified appearance.

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

05 Aug, 2010

1 commit

  • c4685849b   ALSA: als4000: Fix potentially invalid DMA mode setup ... Browse Code »

    My previous patch assumed that the DMA mode (represented by 3 lowest bits of
    ALS4K_GCR99_DMA_EMULATION_CTRL register) is set to the default value 0. If
    that's not the case, it might result in invalid mode to be set.
    This patch fixes this potential problem.

    Signed-off-by: Ondrej Zary
    Signed-off-by: Takashi Iwai

    Ondrej Zary
     

04 Aug, 2010

1 commit

  • b9619230e   ALSA: als4000: enable burst mode ... Browse Code »

    Enable burst mode to prevent dropouts during high PCI bus usage.
    The card is useless in X without this because of dropouts when anything moves
    on the screen (at least with PCI VGA card). Enabling this is also recommended
    by the datasheet (page 48).

    Signed-off-by: Ondrej Zary
    Signed-off-by: Takashi Iwai

    Ondrej Zary
     

30 Mar, 2010

1 commit

  • 5a0e3ad6a   include cleanup: Update gfp.h and slab.h includes to prepare for breaking implic… ... Browse Code »

    …it slab.h inclusion from percpu.h

    percpu.h is included by sched.h and module.h and thus ends up being
    included when building most .c files. percpu.h includes slab.h which
    in turn includes gfp.h making everything defined by the two files
    universally available and complicating inclusion dependencies.

    percpu.h -> slab.h dependency is about to be removed. Prepare for
    this change by updating users of gfp and slab facilities include those
    headers directly instead of assuming availability. As this conversion
    needs to touch large number of source files, the following script is
    used as the basis of conversion.

    http://userweb.kernel.org/~tj/misc/slabh-sweep.py

    The script does the followings.

    * Scan files for gfp and slab usages and update includes such that
    only the necessary includes are there. ie. if only gfp is used,
    gfp.h, if slab is used, slab.h.

    * When the script inserts a new include, it looks at the include
    blocks and try to put the new include such that its order conforms
    to its surrounding. It's put in the include block which contains
    core kernel includes, in the same order that the rest are ordered -
    alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
    doesn't seem to be any matching order.

    * If the script can't find a place to put a new include (mostly
    because the file doesn't have fitting include block), it prints out
    an error message indicating which .h file needs to be added to the
    file.

    The conversion was done in the following steps.

    1. The initial automatic conversion of all .c files updated slightly
    over 4000 files, deleting around 700 includes and adding ~480 gfp.h
    and ~3000 slab.h inclusions. The script emitted errors for ~400
    files.

    2. Each error was manually checked. Some didn't need the inclusion,
    some needed manual addition while adding it to implementation .h or
    embedding .c file was more appropriate for others. This step added
    inclusions to around 150 files.

    3. The script was run again and the output was compared to the edits
    from #2 to make sure no file was left behind.

    4. Several build tests were done and a couple of problems were fixed.
    e.g. lib/decompress_*.c used malloc/free() wrappers around slab
    APIs requiring slab.h to be added manually.

    5. The script was run on all .h files but without automatically
    editing them as sprinkling gfp.h and slab.h inclusions around .h
    files could easily lead to inclusion dependency hell. Most gfp.h
    inclusion directives were ignored as stuff from gfp.h was usually
    wildly available and often used in preprocessor macros. Each
    slab.h inclusion directive was examined and added manually as
    necessary.

    6. percpu.h was updated not to include slab.h.

    7. Build test were done on the following configurations and failures
    were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
    distributed build env didn't work with gcov compiles) and a few
    more options had to be turned off depending on archs to make things
    build (like ipr on powerpc/64 which failed due to missing writeq).

    * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
    * powerpc and powerpc64 SMP allmodconfig
    * sparc and sparc64 SMP allmodconfig
    * ia64 SMP allmodconfig
    * s390 SMP allmodconfig
    * alpha SMP allmodconfig
    * um on x86_64 SMP allmodconfig

    8. percpu.h modifications were reverted so that it could be applied as
    a separate patch and serve as bisection point.

    Given the fact that I had only a couple of failures from tests on step
    6, I'm fairly confident about the coverage of this conversion patch.
    If there is a breakage, it's likely to be something in one of the arch
    headers which should be easily discoverable easily on most builds of
    the specific arch.

    Signed-off-by: Tejun Heo <tj@kernel.org>
    Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
    Cc: Ingo Molnar <mingo@redhat.com>
    Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

    Tejun Heo
     

09 Feb, 2010

1 commit

07 Apr, 2009

1 commit

12 Jan, 2009

1 commit

25 Aug, 2008

2 commits

  • cb780cdd8   ALSA: ALS4000 driver work, step 2 ... Browse Code »

    - more register naming work
    - finally figured out that weird CR register stuff
    (and did I mention that I hate _really_ undecipherable open-coded values?)
    - fix handling of IRQ sharing in interrupt handler
    (hopefully properly, otherwise I'd be grateful to hear your
    pedantic comments ;)
    - add handy SPECS_PAGE references wherever useful
    - comments, cleanup
    - add me as module author

    Signed-off-by: Andreas Mohr
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Andreas Mohr
     
  • c08744498   ALSA: als4000 - Code clean up ... Browse Code »

    - use specs-derived register name enums instead of open-coded numeric
    values, for better understanding of things
    - fix naming confusion ("gcr" was _NOT_ the GCR register stuff, but
    instead the io _base_ which has multiplexed _access_ to GCR config
    space, at _sub_ registers 0x08 and 0x0c)
    - add FIXME comments about a race condition and MPU401 features

    Signed-off-by: Andreas Mohr
    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Andreas Mohr
     

01 Feb, 2008

1 commit

  • 9004acc70   [ALSA] Remove sound/driver.h ... Browse Code »

    This header file exists only for some hacks to adapt alsa-driver
    tree. It's useless for building in the kernel. Let's move a few
    lines in it to sound/core.h and remove it.
    With this patch, sound/driver.h isn't removed but has just a single
    compile warning to include it. This should be really killed in
    future.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

16 Oct, 2007

1 commit

22 Oct, 2006

1 commit

  • 30b35399c   [ALSA] Various fixes for suspend/resume of ALSA PCI drivers ... Browse Code »

    - Check the return value of pci_enable_device() and request_irq()
    in the suspend. If any error occurs there, disable the device
    using snd_card_disconnect().
    - Call pci_set_power_state() properly with pci_choose_state().
    - Fix the order to call pci_set_power_state().
    - Removed obsolete house-made PM codes in some drivers.

    Signed-off-by: Takashi Iwai
    Signed-off-by: Jaroslav Kysela

    Takashi Iwai
     

05 Oct, 2006

1 commit

  • 7d12e780e   IRQ: Maintain regs pointer globally rather than passing to IRQ handlers ... Browse Code »

    Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
    of passing regs around manually through all ~1800 interrupt handlers in the
    Linux kernel.

    The regs pointer is used in few places, but it potentially costs both stack
    space and code to pass it around. On the FRV arch, removing the regs parameter
    from all the genirq function results in a 20% speed up of the IRQ exit path
    (ie: from leaving timer_interrupt() to leaving do_IRQ()).

    Where appropriate, an arch may override the generic storage facility and do
    something different with the variable. On FRV, for instance, the address is
    maintained in GR28 at all times inside the kernel as part of general exception
    handling.

    Having looked over the code, it appears that the parameter may be handed down
    through up to twenty or so layers of functions. Consider a USB character
    device attached to a USB hub, attached to a USB controller that posts its
    interrupts through a cascaded auxiliary interrupt controller. A character
    device driver may want to pass regs to the sysrq handler through the input
    layer which adds another few layers of parameter passing.

    I've build this code with allyesconfig for x86_64 and i386. I've runtested the
    main part of the code on FRV and i386, though I can't test most of the drivers.
    I've also done partial conversion for powerpc and MIPS - these at least compile
    with minimal configurations.

    This will affect all archs. Mostly the changes should be relatively easy.
    Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

    struct pt_regs *old_regs = set_irq_regs(regs);

    And put the old one back at the end:

    set_irq_regs(old_regs);

    Don't pass regs through to generic_handle_irq() or __do_IRQ().

    In timer_interrupt(), this sort of change will be necessary:

    - update_process_times(user_mode(regs));
    - profile_tick(CPU_PROFILING, regs);
    + update_process_times(user_mode(get_irq_regs()));
    + profile_tick(CPU_PROFILING);

    I'd like to move update_process_times()'s use of get_irq_regs() into itself,
    except that i386, alone of the archs, uses something other than user_mode().

    Some notes on the interrupt handling in the drivers:

    (*) input_dev() is now gone entirely. The regs pointer is no longer stored in
    the input_dev struct.

    (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
    something different depending on whether it's been supplied with a regs
    pointer or not.

    (*) Various IRQ handler function pointers have been moved to type
    irq_handler_t.

    Signed-Off-By: David Howells
    (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

    David Howells
     

13 Jul, 2006

1 commit

23 Jun, 2006

1 commit

28 Apr, 2006

1 commit

29 Mar, 2006

1 commit

03 Jan, 2006

4 commits

11 Nov, 2005

1 commit

04 Nov, 2005

2 commits

12 Sep, 2005

1 commit

  • 3bcd4649b   [ALSA] set owner field in struct pci_driver ... Browse Code »

    AD1889 driver,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
    AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
    ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
    Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
    RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
    ALI5451 driver,au88x0 driver,CS46xx driver,EMU10K1/EMU10K2 driver
    HDA Intel driver,ICE1712 driver,ICE1724 driver,KORG1212 driver
    MIXART driver,NM256 driver,RME HDSP driver,RME9652 driver
    Trident driver,Digigram VX222 driver,YMFPCI driver
    Set the module owner field in each driver's struct pci_driver to get
    the driver symlink in the sysfs device directory.

    Signed-off-by: Clemens Ladisch

    Clemens Ladisch
     

29 May, 2005

2 commits

  • 11ca9afcf   [ALSA] als4000 - Fix kernel panic with MPU401 ... Browse Code »

    ALS4000 driver
    Fix kernel panic with als4000 when MPU401 is accessed.

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     
  • 01d25d460   [ALSA] Replace pci_module_init() with pci_register_driver() ... Browse Code »

    Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
    AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
    ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
    Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
    RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
    ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver
    EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
    KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver
    RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver
    Replace the obsolete pci_module_init() with pci_register_driver().

    Signed-off-by: Takashi Iwai

    Takashi Iwai
     

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds