Eric Lee / linux-smarc-t335x-v3.2

25 Nov, 2008

1 commit

  • 7a6b6f515   DCB: fix kconfig option ... Browse Code »

    Since the netlink option for DCB is necessary to actually be useful,
    simplified the Kconfig option. In addition, added useful help text for the
    Kconfig option.

    Signed-off-by: Jeff Kirsher
    Signed-off-by: David S. Miller

    Jeff Kirsher
     

22 Nov, 2008

1 commit

21 Nov, 2008

1 commit

  • 2f90b8657   ixgbe: this patch adds support for DCB to the kernel and ixgbe driver ... Browse Code »

    This adds support for Data Center Bridging (DCB) features in the ixgbe
    driver and adds an rtnetlink interface for configuring DCB to the
    kernel. The DCB feature support included are Priority Grouping (PG) -
    which allows bandwidth guarantees to be allocated to groups to traffic
    based on the 802.1q priority, and Priority Based Flow Control (PFC) -
    which introduces a new MAC control PAUSE frame which works at
    granularity of the 802.1p priority instead of the link (IEEE 802.3x).

    Signed-off-by: Alexander Duyck
    Signed-off-by: Jeff Kirsher
    Signed-off-by: Peter P Waskiewicz Jr
    Signed-off-by: David S. Miller

    Alexander Duyck
     

09 Oct, 2008

1 commit

  • 91da11f87   net: Distributed Switch Architecture protocol support ... Browse Code »

    Distributed Switch Architecture is a protocol for managing hardware
    switch chips. It consists of a set of MII management registers and
    commands to configure the switch, and an ethernet header format to
    signal which of the ports of the switch a packet was received from
    or is intended to be sent to.

    The switches that this driver supports are typically embedded in
    access points and routers, and a typical setup with a DSA switch
    looks something like this:

    +-----------+ +-----------+
    | | RGMII | |
    | +-------+ +------ 1000baseT MDI ("WAN")
    | | | 6-port +------ 1000baseT MDI ("LAN1")
    | CPU | | ethernet +------ 1000baseT MDI ("LAN2")
    | |MIImgmt| switch +------ 1000baseT MDI ("LAN3")
    | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4")
    | | | |
    +-----------+ +-----------+

    The switch driver presents each port on the switch as a separate
    network interface to Linux, polls the switch to maintain software
    link state of those ports, forwards MII management interface
    accesses to those network interfaces (e.g. as done by ethtool) to
    the switch, and exposes the switch's hardware statistics counters
    via the appropriate Linux kernel interfaces.

    This initial patch supports the MII management interface register
    layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and
    supports the "Ethertype DSA" packet tagging format.

    (There is no officially registered ethertype for the Ethertype DSA
    packet format, so we just grab a random one. The ethertype to use
    is programmed into the switch, and the switch driver uses the value
    of ETH_P_EDSA for this, so this define can be changed at any time in
    the future if the one we chose is allocated to another protocol or
    if Ethertype DSA gets its own officially registered ethertype, and
    everything will continue to work.)

    Signed-off-by: Lennert Buytenhek
    Tested-by: Nicolas Pitre
    Tested-by: Byron Bradley
    Tested-by: Tim Ellis
    Tested-by: Peter van Valderen
    Tested-by: Dirk Teurlings
    Signed-off-by: David S. Miller

    Lennert Buytenhek
     

23 Sep, 2008

1 commit

08 Jul, 2008

1 commit

  • 7750f403c   vlan: uninline __vlan_hwaccel_rx ... Browse Code »

    The function is huge and included at least once in every VLAN acceleration
    capable driver. Uninline it; to avoid having drivers depend on the VLAN
    module, the function is always built in statically when VLAN is enabled.

    With all VLAN acceleration capable drivers that build on x86_64 enabled,
    this results in:

    text data bss dec hex filename
    6515227 854044 343968 7713239 75b1d7 vmlinux.inlined
    6505637 854044 343968 7703649 758c61 vmlinux.uninlined
    ----------------------------------------------------------
    -9590

    Signed-off-by: Patrick McHardy
    Signed-off-by: David S. Miller

    Patrick McHardy
     

29 Jan, 2008

1 commit

  • 0d66548a1   [CAN]: Add PF_CAN core module ... Browse Code »

    This patch adds the CAN core functionality but no protocols or drivers.
    No protocol implementations are included here. They come as separate
    patches. Protocol numbers are already in include/linux/can.h.

    Signed-off-by: Oliver Hartkopp
    Signed-off-by: Urs Thuermann
    Signed-off-by: David S. Miller

    Oliver Hartkopp
     

15 Jul, 2007

1 commit

  • bd238fb43   9p: Reorganization of 9p file system code ... Browse Code »

    This patchset moves non-filesystem interfaces of v9fs from fs/9p to net/9p.
    It moves the transport, packet marshalling and connection layers to net/9p
    leaving only the VFS related files in fs/9p. This work is being done in
    preparation for in-kernel 9p servers as well as alternate 9p clients (other
    than VFS).

    Signed-off-by: Latchesar Ionkov
    Signed-off-by: Eric Van Hensbergen

    Latchesar Ionkov
     

11 Jul, 2007

1 commit

07 May, 2007

1 commit

06 May, 2007

1 commit

27 Apr, 2007

1 commit

  • 17926a793   [AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both ... Browse Code »

    Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve
    answers to AFS clients. KerberosIV security is fully supported. The patches
    and some example test programs can be found in:

    http://people.redhat.com/~dhowells/rxrpc/

    This will eventually replace the old implementation of kernel-only RxRPC
    currently resident in net/rxrpc/.

    Signed-off-by: David Howells
    Signed-off-by: David S. Miller

    David Howells
     

26 Apr, 2007

1 commit

  • 2a5e1c0eb   [WIRELESS]: Refactor wireless Kconfig. ... Browse Code »

    This patch refactors the wireless Kconfig all over and already
    introduces net/wireless/Kconfig with just the WEXT bit for now,
    the cfg80211 patch will add to that as well.

    Signed-off-by: Johannes Berg
    Signed-off-by: John W. Linville
    Signed-off-by: David S. Miller

    Johannes Berg
     

09 Feb, 2007

1 commit

23 Sep, 2006

1 commit

  • d15c345fe   [NetLabel]: core NetLabel subsystem ... Browse Code »

    Add a new kernel subsystem, NetLabel, to provide explicit packet
    labeling services (CIPSO, RIPSO, etc.) to LSM developers. NetLabel is
    designed to work in conjunction with a LSM to intercept and decode
    security labels on incoming network packets as well as ensure that
    outgoing network packets are labeled according to the security
    mechanism employed by the LSM. The NetLabel subsystem is configured
    through a Generic NETLINK interface described in the header files
    included in this patch.

    Signed-off-by: Paul Moore
    Signed-off-by: David S. Miller

    Paul Moore
     

13 Jan, 2006

1 commit

  • b97bf3fd8   [TIPC] Initial merge ... Browse Code »

    TIPC (Transparent Inter Process Communication) is a protocol designed for
    intra cluster communication. For more information see
    http://tipc.sourceforge.net

    Signed-off-by: Per Liden

    Per Liden
     

15 Nov, 2005

1 commit

  • 47d4305bf   [NETFILTER]: link 'netfilter' before ipv4 ... Browse Code »

    Staticaly linked nf_conntrack_ipv4 requires nf_conntrack. but currently
    nf_conntrack is linked after it. This changes the order of ipv4 and netfilter
    to fix this.

    Signed-off-by: Krzysztof Oledzki
    Signed-off-by: Yasuyuki Kozakai
    Signed-off-by: Harald Welte
    Signed-off-by: David S. Miller

    Krzysztof Oledzki
     

02 Sep, 2005

1 commit

30 Aug, 2005

2 commits

  • 7c657876b   [DCCP]: Initial implementation ... Browse Code »

    Development to this point was done on a subversion repository at:

    http://oops.ghostprotocols.net:81/cgi-bin/viewcvs.cgi/dccp-2.6/

    This repository will be kept at this site for the foreseable future,
    so that interested parties can see the history of this code,
    attributions, etc.

    If I ever decide to take this offline I'll provide the full history at
    some other suitable place.

    Signed-off-by: Arnaldo Carvalho de Melo
    Signed-off-by: David S. Miller

    Arnaldo Carvalho de Melo
     
  • f9e815b37   [NETFITLER]: Add nfnetlink layer. ... Browse Code »

    Introduce "nfnetlink" (netfilter netlink) layer. This layer is used as
    transport layer for all userspace communication of the new upcoming
    netfilter subsystems, such as ctnetlink, nfnetlink_queue and some day even
    the mythical pkttables ;)

    Signed-off-by: Harald Welte
    Signed-off-by: David S. Miller

    Harald Welte
     

13 May, 2005

1 commit

17 Apr, 2005

1 commit

  • 1da177e4c   Linux-2.6.12-rc2 ... Browse Code »

    Initial git repository build. I'm not bothering with the full history,
    even though we have it. We can create a separate "historical" git
    archive of that later if we want to, and in the meantime it's about
    3.2GB when imported into git - space that would just make the early
    git days unnecessarily complicated, when we don't have a lot of good
    infrastructure for it.

    Let it rip!

    Linus Torvalds