06 Jan, 2009
1 commit
-
Signed-off-by: Alan Cox
Signed-off-by: Linus Torvalds
30 Dec, 2008
2 commits
-
ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.Signed-off-by: Julia Lawall
Acked-by: "Prakash, Sathya"
Signed-off-by: James Bottomley -
Remove excess kernel-doc function parameter notation:
Warning(drivers/message/fusion/mptbase.c:964): Excess function parameter or struct member 'handle' description in 'mpt_free_msg_frame'
Warning(drivers/message/fusion/mptbase.c:5434): Excess function parameter or struct member 'portnum' description in 'mpt_findImVolumes'
Warning(drivers/message/fusion/mptbase.c:6949): Excess function parameter or struct member 'mr' description in 'mpt_spi_log_info'Signed-off-by: Randy Dunlap
cc: Eric.Moore@lsi.com
Signed-off-by: James Bottomley
29 Dec, 2008
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
20 Dec, 2008
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] mpt fusion: clear list of outstanding commands on host reset
[SCSI] scsi_lib: only call scsi_unprep_request() under queue lock
[SCSI] ibmvstgt: move crq_queue_create to the end of initialization
[SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools
[SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S
17 Dec, 2008
1 commit
-
A bug in the fusion driver was exposed by the switch to block timeout.
Basically, drivers are supposed to terminate commands once error
handling begins on them. The fusion apparently wasn't doing this.
Under the old timeout regime, completions on terminated commands would
by and large get ignored because of the way command timeouts used to
work. The new block timers are very intolerant to this, though,
becuase the request gets cleaned and freed.Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=12195
Reported-by: Alex Shi
Tested-by: Ming Lin
Cc: Eric Moore
Signed-off-by: James Bottomley
16 Dec, 2008
1 commit
-
Conflicts:
drivers/net/e1000e/ich8lan.c
06 Dec, 2008
2 commits
-
no argument named @msg in i2o_msg_get_wait(), remove it.
Signed-off-by: Qinghuang Feng
Signed-off-by: Alan Cox
Signed-off-by: Linus Torvalds -
Fix incorrect use of loose in i2o_block.c
It should be 'lose', not 'loose'.
Signed-off-by: Nick Andrew
Signed-off-by: Alan Cox
Signed-off-by: Linus Torvalds
04 Dec, 2008
1 commit
-
Simply replace netdev->priv with netdev_priv().
Signed-off-by: Wang Chen
Signed-off-by: David S. Miller
12 Nov, 2008
1 commit
-
Conflicts:
drivers/message/fusion/mptlan.c
drivers/net/sfc/ethtool.c
net/mac80211/debugfs_sta.c
08 Nov, 2008
1 commit
-
This triggers false bug reports as it does a bogus kmalloc with locks held
but is never really compiled into the kernel.Closes #8329
Signed-off-by: Alan Cox
Signed-off-by: Linus Torvalds
07 Nov, 2008
1 commit
-
Conflicts:
drivers/net/wireless/ath5k/base.c
net/8021q/vlan_core.c
02 Nov, 2008
1 commit
-
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set. And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.Signed-off-by: Al Viro
Signed-off-by: Linus Torvalds
31 Oct, 2008
2 commits
-
Conflicts:
drivers/net/wireless/p54/p54common.c
-
Fixup i2o kernel-doc warnings:
Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:579): No description found for parameter 'bdev'
Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:579): No description found for parameter 'mode'
Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:608): No description found for parameter 'disk'
Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:608): No description found for parameter 'mode'
Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:657): No description found for parameter 'bdev'
Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:657): No description found for parameter 'mode'Signed-off-by: Randy Dunlap
Cc: Al Viro
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
28 Oct, 2008
1 commit
-
A number of places still use %02x:...:%02x because it's
in debug statements or for no real reason. Make a few
of them use %pM.Signed-off-by: Johannes Berg
Signed-off-by: David S. Miller
24 Oct, 2008
2 commits
-
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits)
[SCSI] sd: fix computation of the full size of the device
[SCSI] lib: string_get_size(): don't hang on zero; no decimals on exact
[SCSI] sun3x_esp: Convert && to ||
[SCSI] sd: remove command-size switching code
[SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API
[SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API
[SCSI] fix netlink kernel-doc
[SCSI] sd: Fix handling of NO_SENSE check condition
[SCSI] export busy state via q->lld_busy_fn()
[SCSI] refactor sdev/starget/shost busy checking
[SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver.
[SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume
[SCSI] aic79xx: user visible misuse wrong SI units (not disk size!)
[SCSI] ipr: use memory_read_from_buffer()
[SCSI] aic79xx: fix shadowed variables
[SCSI] aic79xx: fix shadowed variables, add statics
[SCSI] aic7xxx: update *_shipped files
[SCSI] aic7xxx: update .reg files
[SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser
[SCSI] scsi_dh: Initialize path state to be passive when path is not owned
... -
Make SPI timeout 10s the same as SAS
Signed-off-by: Bernd Schubert
Acked-by: "Prakash, Sathya"
Signed-off-by: James Bottomley
21 Oct, 2008
2 commits
-
Signed-off-by: Al Viro
-
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both. That's this changeset.
2) for each driver convert to new methods. *ALL* drivers
are converted in this series.
3) kill the old (renamed) methods.Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain. The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.New methods:
open(bdev, mode)
release(disk, mode)
ioctl(bdev, mode, cmd, arg) /* Called without BKL */
compat_ioctl(bdev, mode, cmd, arg)
locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */Signed-off-by: Al Viro
17 Oct, 2008
1 commit
-
The I2O ioctls assume 32bits. In itself that is fine as they are old
cards and nobody uses 64bit. However on LKML it was noted this
assumption is also made for allocated memory and is unsafe on 64bit
systems.Fixing this is a mess. It turns out there is tons of crap buried in a
header file that does racy 32/64bit filtering on the masks.So we:
- Verify all callers of the racy code can sleep (i2o_dma_[re]alloc)
- Move the code into a new i2o/memory.c file
- Remove the gfp_mask argument so nobody can try and misuse the function
- Wrap a mutex around the problem area (a single mutex is easy to do and
none of this is performance relevant)
- Switch the remaining problem kmalloc holdout to use i2o_dma_allocCc: Markus Lidel
Cc: Vasily Averin
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
28 Jul, 2008
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (59 commits)
[SCSI] replace __FUNCTION__ with __func__
[SCSI] extend the last_sector_bug flag to cover more sectors
[SCSI] qla2xxx: Update version number to 8.02.01-k6.
[SCSI] qla2xxx: Additional NPIV corrections.
[SCSI] qla2xxx: suppress uninitialized-var warning
[SCSI] qla2xxx: use memory_read_from_buffer()
[SCSI] qla2xxx: Issue proper ISP callbacks during stop-firmware.
[SCSI] ch: fix ch_remove oops
[SCSI] 3w-9xxx: add MSI support and misc fixes
[SCSI] scsi_lib: use blk_rq_tagged in scsi_request_fn
[SCSI] ibmvfc: Update driver version to 1.0.1
[SCSI] ibmvfc: Add ADISC support
[SCSI] ibmvfc: Miscellaneous fixes
[SCSI] ibmvfc: Fix hang on module removal
[SCSI] ibmvfc: Target refcounting fixes
[SCSI] ibmvfc: Reduce unnecessary log noise
[SCSI] sym53c8xx: free luntbl in sym_hcb_free
[SCSI] scsi_scan.c: Release mutex in error handling code
[SCSI] scsi_eh_prep_cmnd should save scmd->underflow
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field
...
27 Jul, 2008
2 commits
-
[jejb: fixed up a ton of missed conversions.
All of you are on notice this has happened, driver trees will now
need to be rebased]Signed-off-by: Harvey Harrison
Cc: SCSI List
Signed-off-by: Andrew Morton
Signed-off-by: James Bottomley -
Cc: Randy Dunlap
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
25 Jul, 2008
1 commit
-
Compile warning:
ignoring return value of `sysfs_create_link', declared with attribute warn_unused_result.If sysfs_create_link failed, take care of the return value and do some
error handle after the failure.Since sysfs_remove_link() will check whether a link exists, when removing the
link in error path, we don't need to care whether a link was created.Signed-off-by: Wang Chen
Cc: Markus Lidel
Cc: Jens Axboe
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
22 Jul, 2008
1 commit
-
Kobjects do not have a limit in name size since a while, so stop
pretending that they do.Signed-off-by: Kay Sievers
Signed-off-by: Greg Kroah-Hartman
16 Jul, 2008
1 commit
-
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits)
[SCSI] scsi_dh: fix kconfig related build errors
[SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of
[SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h
[SCSI] make struct scsi_{host,target}_type static
[SCSI] fix locking in host use of blk_plug_device()
[SCSI] zfcp: Cleanup external header file
[SCSI] zfcp: Cleanup code in zfcp_erp.c
[SCSI] zfcp: zfcp_fsf cleanup.
[SCSI] zfcp: consolidate sysfs things into one file.
[SCSI] zfcp: Cleanup of code in zfcp_aux.c
[SCSI] zfcp: Cleanup of code in zfcp_scsi.c
[SCSI] zfcp: Move status accessors from zfcp to SCSI include file.
[SCSI] zfcp: Small QDIO cleanups
[SCSI] zfcp: Adapter reopen for large number of unsolicited status
[SCSI] zfcp: Fix error checking for ELS ADISC requests
[SCSI] zfcp: wait until adapter is finished with ERP during auto-port
[SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver
[SCSI] sg: Add target reset support
[SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC
[SCSI] sd: Move scsi_disk() accessor function to sd.h
...
15 Jul, 2008
1 commit
12 Jul, 2008
3 commits
-
When the firmware is in Fault state it will be identifed only when the next time
the driver access the IOC state.
This patch includes a polling function in the driver which will be executed in
regular interval to check the status of the firmware and if it is in Fault
state, then the firmware will be reset by the driver.Signed-off-by: Sathya Prakash
Signed-off-by: James Bottomley -
The initial period is set to 0xFF
Signed-off-by: Sathya Prakash
Signed-off-by: James Bottomley -
There's a fault on the FC controllers that makes them not respond
correctly to MSI. The SPI controllers are fine, but are likely to be
onboard on older motherboards which don't handle MSI correctly, so
default both these cases to disabled. Enable by setting the module
parameter mpt_msi_enable=1.For the SAS case, enable MSI by default, but it can be disabled by
setting the module parameter mpt_msi_enable=0.Cc: "Prakash, Sathya"
Signed-off-by: James Bottomley
08 Jul, 2008
1 commit
-
The problem here is that if the ioc faults too early in the bring up
sequence (as it usually does for an irq routing problem), ioc_reset gets
called before the scsi host is even allocated. This causes an oops when
it later schedules a renegotiation. Fix this by checking ioc->sh before
trying to renegotiate.Cc: "Moore, Eric"
Cc: Stable Tree
Signed-off-by: James Bottomley
03 Jul, 2008
2 commits
-
This driver appears to really need the BKL to protect open_files.
Signed-off-by: Jonathan Corbet
-
It looks like this driver really needs the BKL here.
Signed-off-by: Jonathan Corbet
21 Jun, 2008
1 commit
-
Signed-off-by: Arnd Bergmann
05 Jun, 2008
3 commits
-
Updating copyright statement to include the year 2008
Signed-off-by: Sathya Prakash
Signed-off-by: James Bottomley -
Updating driver version to 3.04.07 from 3.04.06
Signed-off-by: Sathya Prakash
Signed-off-by: James Bottomley -
This patch makes the needlessly global struct mpt_proc_root_dir static.
Signed-off-by: Adrian Bunk
Acked-by: "Prakash, Sathya"
Signed-off-by: James Bottomley
27 May, 2008
1 commit
-
Following a hard reset of a SAS raid, one of the raid targets is occasionally
missing. I tracked this down to a pretty obscure little bug.The LSI fusion drivers for SAS and Fibre Channel both use their respective
transport layers. Those transport layers increment the target number
assigned to new targets.The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host
structure to avoid scanning the scsi host adapter. Both fusion drivers set
"this_id" from a value returned in a firmware PortFacts response. For my
particular test case (SAS) the firmware id assigned to the initiator was
173. After enough raid resets to cause the raid targets to go and come a
sufficient number of times, the id assigned by the transport to a raid
target would match the id assigned by the host adapter to the "this_id"
field, resulting in that target not being scanned.Fix by not assigning this_id and not checking it in slave_configure.
Signed-off-by: Michael Reed
Acked-by: "Moore, Eric"
Signed-off-by: James Bottomley
