Eric Lee / linux-smarc-t335x-v3.2

02 Dec, 2008

1 commit

  • 36be47d6d   parport_serial: fix array overflow ... Browse Code »

    The netmos_9xx5_combo type assumes that PCI SSID provides always the
    correct value for the number of parallel and serial ports, but there are
    indeed broken devices with wrong numbers, which may result in Oops.

    This patch simply adds the check of the array range.

    Reference: Novell bnc#447067
    https://bugzilla.novell.com/show_bug.cgi?id=447067

    Signed-off-by: Takashi Iwai
    Cc:
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Takashi Iwai
     

19 Nov, 2008

1 commit

31 Oct, 2008

1 commit

24 Oct, 2008

1 commit

18 Oct, 2008

1 commit

17 Oct, 2008

2 commits

14 Oct, 2008

1 commit

  • 2be4ff2f0   Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 ... Browse Code »

    * git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
    pcmcia: ioctl-internal definitions
    pcmcia: cistpl header cleanup
    pcmcia: remove unused argument to pcmcia_parse_tuple()
    pcmcia: card services header cleanup
    pcmcia: device_id header cleanup
    pcmcia: encapsulate ioaddr_t
    pcmcia: cleanup device driver header file
    pcmcia: cleanup socket services header file
    pcmcia: merge ds_internal.h into cs_internal.h
    pcmcia: cleanup cs_internal.h
    pcmcia: cs_internal.h is internal
    pcmcia: use dev_printk for cs_error()
    pcmcia: remove CS_ error codes alltogether
    pcmcia: deprecate CS_BAD_TUPLE
    pcmcia: deprecate CS_BAD_ARGS
    pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE
    pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE
    pcmcia: deprecate CS_NO_MORE_ITEMS
    pcmcia: deprecate CS_IN_USE
    pcmcia: deprecate CS_CONFIGURATION_LOCKED
    ...

    Fix trivial conflict in drivers/pcmcia/ds.c manually

    Linus Torvalds
     

31 Aug, 2008

1 commit

29 Aug, 2008

1 commit

23 Aug, 2008

4 commits

27 Jul, 2008

4 commits

26 Jul, 2008

1 commit

  • db358b40e   parport: fix platform driver hotplug/coldplug ... Browse Code »

    Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
    with "platform:"), the platform modalias is prefixed with "platform:".
    Add MODULE_ALIAS() to the hotpluggable parport platform drivers, to
    re-enable auto loading.

    Signed-off-by: Kay Sievers
    Signed-off-by: David Brownell
    Cc: Greg KH
    Cc: "Rafael J. Wysocki"
    Acked-by: Ben Dooks
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Kay Sievers
     

30 Apr, 2008

2 commits

29 Apr, 2008

1 commit

  • f2b9a3962   parport_pc: wrap PNP probe code in #ifdef CONFIG_PNP ... Browse Code »

    Wrap PNP probe code in #ifdef CONFIG_PNP. We already do the same for
    CONFIG_PCI.

    Without this change, we'll have unresolved references to pnp_get_resource()
    function when CONFIG_PNP=n. (This is a new interface that's not in mainline
    yet.)

    Signed-off-by: Bjorn Helgaas
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Bjorn Helgaas
     

20 Apr, 2008

1 commit

  • cf2d3ff99   avr32: don't offer PARPORT_PC ... Browse Code »

    This patch fixes the following compile error:

    ...
    CC [M] drivers/parport/parport_pc.o
    /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/parport/parport_pc.c:67:25: error: asm/parport.h: No such file or directory
    /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/parport/parport_pc.c: In function 'parport_pc_find_ports':
    /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/parport/parport_pc.c:3215: error: implicit declaration of function 'parport_pc_find_nonpci_ports'
    make[3]: *** [drivers/parport/parport_pc.o] Error 1

    Signed-off-by: Adrian Bunk
    Signed-off-by: Haavard Skinnemoen

    Adrian Bunk
     

05 Apr, 2008

1 commit

  • 4ed919014   parport_pc: make sure to release IO ports after probing for IT87XX ... Browse Code »

    Commit f63fd7e299ee13da071ecfce2b90b58c5e1562b1 ("parport_pc: detection
    for SuperIO IT87XX POST") only released the IO port region on success,
    not when the probe for the IT87XX chip failed.

    That caused not only a reserved region to leak, but also caused an oops
    when the driver module was unloaded and somebody tried to cat
    /proc/ioports - because the string that was assigned to the IO port
    region was a static string in the module virtual address area.

    Reported-by: Lubos Lunak
    Cc: Jan Kara
    Cc: Petr Cvek
    Acked-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Linus Torvalds
     

14 Feb, 2008

1 commit

  • 55265b00a   parport: section fixup ... Browse Code »

    Fix section warning for parport_ECP_supported(); it's called from a routine
    exported to modules, so it can't be removed with __devinit section pruning.

    Signed-off-by: David Brownell
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    David Brownell
     

09 Feb, 2008

2 commits

  • 13050d890   parport: fix ieee1284_epp_read_addr ... Browse Code »

    We bought cheap notebooks to control our custom data acquisition system, which
    requires EPP mode (read/write, data/addr). The bios does not offer EPP mode,
    and indeed hardware EPP mode appears not to work, although the parport driver
    tries to use it. EPPSWE mode does work for data r/w and addr write, but addr
    read requires this patch.

    (stephan)rshgse3: lspci

    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
    00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
    00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
    02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12)
    05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
    08:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
    08:03.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
    08:03.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)

    (stephan)rshgse3: grep . /proc/sys/dev/parport/parport0/*

    /proc/sys/dev/parport/parport0/base-addr:888 1912
    /proc/sys/dev/parport/parport0/dma:-1
    /proc/sys/dev/parport/parport0/irq:7
    /proc/sys/dev/parport/parport0/modes:PCSPP,TRISTATE,EPP
    /proc/sys/dev/parport/parport0/spintime:500

    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Stephan Boettcher
     
  • b920de1b7   mn10300: add the MN10300/AM33 architecture to the kernel ... Browse Code »

    Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
    kernel.

    This patch also adds board support for the ASB2303 with the ASB2308 daughter
    board, and the ASB2305. The only processor supported is the MN103E010, which
    is an AM33v2 core plus on-chip devices.

    [akpm@linux-foundation.org: nuke cvs control strings]
    Signed-off-by: Masakazu Urade
    Signed-off-by: Koichi Yasutake
    Signed-off-by: David Howells
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    David Howells
     

07 Feb, 2008

3 commits

  • f63fd7e29   parport_pc: detection for SuperIO IT87XX POST ... Browse Code »

    Add detection for IT87XX SuperIO chip and disabling its POST feature, which
    made noise on parallel port's pins.

    Signed-off-by: Petr Cvek
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Petr Cvek
     
  • c01106e57   parport_serial: netmos 9855 fix ... Browse Code »

    Fix wrong netmos 9855 serial port configuration.

    On loading only one serial port was present and it wasn't working. After
    looking in the data sheet I realized that the base address was wrong. For
    further reference here is lspci and relevant dmesg output:

    02:00.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O
    Controller (rev 01) (prog-if 02)
    Subsystem: LSI Logic / Symbios Logic Unknown device 0022
    Flags: medium devsel, IRQ 19
    I/O ports at df00 [size=8]
    I/O ports at de00 [size=8]
    I/O ports at dd00 [size=8]
    I/O ports at dc00 [size=8]
    I/O ports at db00 [size=8]
    I/O ports at da00 [size=16]

    parport1: PC-style at 0xdd00 [PCSPP,TRISTATE]
    parport2: PC-style at 0xdf00 [PCSPP,TRISTATE,EPP]
    0000:02:00.0: ttyS0 at I/O 0xdb00 (irq = 19) is a 16550A
    0000:02:00.0: ttyS1 at I/O 0xda00 (irq = 19) is a 16550A

    Signed-off-by: Christian Pellegrin
    Cc: Thomas Richter
    Cc: Bjorn Helgaas
    Cc: Martin Schitter
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Christian Pellegrin
     
  • dc999159b   parport: add support for the Quatech SPPXP-100 Parallel port PCI ExpressCard ... Browse Code »

    Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to
    include/linux/pci_id.h

    Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard

    [akpm@linux-foundation.org: build fix]
    Signed-off-by: Luís P Mendes
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Luís P Mendes
     

03 Feb, 2008

1 commit

18 Dec, 2007

1 commit

24 Oct, 2007

3 commits

19 Oct, 2007

1 commit

  • 25398a158   sysctl: parport remove binary paths ... Browse Code »

    The sysctl binary paths don't look as if they even code work, .data is not
    filled in, and all of the proc_handlers look at extra1 and there is not
    strategy routine.

    So just kill the binary paths.

    In addition this patch removes the setting of extra1 on directories. It
    doesn't look like the parport code ever examines it, and it's bad sysctl form.

    [bunk@kernel.org: remove parport_device_num()]
    Signed-off-by: Eric W. Biederman
    Signed-off-by: Adrian Bunk
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Eric W. Biederman
     

01 Aug, 2007

1 commit

  • 8daedea65   parport_pc locking fix ... Browse Code »

    http://bugzilla.kernel.org/show_bug.cgi?id=8821 reports a might_sleep()
    warning due to parport_pc_exit() running platform_device_unregister() while
    holding ports_lock.

    Just remove the locking: nobody else can access ports_list during module_exit.

    Cc: "Mike Sharkey"
    Cc: Tim Waugh
    Cc: Stas Sergeev
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Andrew Morton
     

20 Jul, 2007

2 commits

  • dfedfaf55   m68k: exclude more unbuildable drivers ... Browse Code »

    anything that wants working dma-mapping won't work
    parport_pc won't work on m68k unless we have ISA

    Signed-off-by: Al Viro
    Signed-off-by: Linus Torvalds

    Al Viro
     
  • dd00cc486   some kmalloc/memset ->kzalloc (tree wide) ... Browse Code »

    Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

    Here is a short excerpt of the semantic patch performing
    this transformation:

    @@
    type T2;
    expression x;
    identifier f,fld;
    expression E;
    expression E1,E2;
    expression e1,e2,e3,y;
    statement S;
    @@

    x =
    - kmalloc
    + kzalloc
    (E1,E2)
    ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
    - memset((T2)x,0,E1);

    @@
    expression E1,E2,E3;
    @@

    - kzalloc(E1 * E2,E3)
    + kcalloc(E1,E2,E3)

    [akpm@linux-foundation.org: get kcalloc args the right way around]
    Signed-off-by: Yoann Padioleau
    Cc: Richard Henderson
    Cc: Ivan Kokshaysky
    Acked-by: Russell King
    Cc: Bryan Wu
    Acked-by: Jiri Slaby
    Cc: Dave Airlie
    Acked-by: Roland Dreier
    Cc: Jiri Kosina
    Acked-by: Dmitry Torokhov
    Cc: Benjamin Herrenschmidt
    Acked-by: Mauro Carvalho Chehab
    Acked-by: Pierre Ossman
    Cc: Jeff Garzik
    Cc: "David S. Miller"
    Acked-by: Greg KH
    Cc: James Bottomley
    Cc: "Antonino A. Daplas"
    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Yoann Padioleau
     

17 Jul, 2007

1 commit

  • e7c310c36   parport_pc: it887x fix ... Browse Code »

    The IO port range requested by parport_pc.c:sio_ite_8872_probe is too small.
    The IO-ports of ttyS1 (0x2f8) will be missconfigured by the ITE-chip. The ITE
    starts looking for the chip a 0x2a0. An IO-portrange of 32 will not overwrite
    the ports of ttyS1. Therefore register 0x60 should be written with
    0xe5000000, enabling the ITE and setting IO-portsize to 32 bytes.

    Signed-off-by: Andrew Morton
    Signed-off-by: Linus Torvalds

    Niels de Vos