06 May, 2011
1 commit
-
Saves about 50KB of data.
Old/new size of all objects:
text data bss dec hex filename
563015 80096 130684 773795 bcea3 (TOTALS)
610916 32256 130632 773804 bceac (TOTALS)Signed-off-by: Joe Perches
Acked-by: Kurt Van Dijck (for drivers/net/can/softing/softing_cs.c)
Signed-off-by: Dominik Brodowski
29 Sep, 2010
5 commits
-
Tested-by: Wolfram Sang
Signed-off-by: Dominik Brodowski -
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding
fields in struct pcmcia_device *p_dev->resource[0,1,2] are set
accordinly. Drivers wishing to override certain settings may do so in
the callback function, but they no longer need to parse the CIS entries
stored in cistpl_cftable_entry_t themselves.CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang
Signed-off-by: Dominik Brodowski -
Introduce an autoconfiguration feature to set certain values in
pcmcia_loop_config(), instead of copying the same code over and over
in each PCMCIA driver. At first, introduce the following options:CONF_AUTO_CHECK_VCC check or matching Vcc entry
CONF_AUTO_SET_VPP set Vpp
CONF_AUTO_AUDIO enable the speaker lineCC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan (for drivers/bluetooth)
Tested-by: Wolfram Sang
Signed-off-by: Dominik Brodowski -
pcmcia_enable_device() now replaces pcmcia_request_configuration().
Instead of config_req_t, all necessary flags are either passed as
a parameter to pcmcia_enable_device(), or (in rare circumstances)
set in struct pcmcia_device -> flags.With the last remaining user of include/pcmcia/cs.h gone, remove
all references.CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan (for drivers/bluetooth)
Tested-by: Wolfram Sang
Signed-off-by: Dominik Brodowski -
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO
(all other drivers). As this flags seems to relate to ioport access, make
it conditional to the driver having requested IO port access. There are two
drivers which do not request IO ports, but did set INT_MEMORY_AND_IO:
ray_cs and b43. For those, we consistently only set INT_MEMORY in future.CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan (for drivers/bluetooth)
Tested-by: Wolfram Sang
Signed-off-by: Dominik Brodowski
03 Aug, 2010
2 commits
-
Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch
Acked-by: Marcel Holtmann (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski -
After pcmcia_request_io(), do not make use of the values stored in
io_req_t, but instead use those found in struct pcmcia_device->resource[].CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski
31 Jul, 2010
1 commit
-
Remove cs_types.h which is no longer needed: Most definitions aren't
used at all, a few can be made away with, and two remaining definitions
(typedefs, unfortunatley) may be moved to more specific places.CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann (for drivers/bluetooth/)
Acked-by: David S. Miller
Signed-off-by: Dominik Brodowski
10 May, 2010
1 commit
-
dev_node_t was only used to transport some minor/major numbers
from the PCMCIA device drivers to deprecated userspace helpers.
However, only a few drivers made use of it, and the userspace
helpers are deprecated anyways. Therefore, get rid of dev_node_t .As a first step, remove any usage of dev_node_t from drivers which
only wrote to this typedef/struct, but did not make use of it.CC: linux-bluetooth@vger.kernel.org
CC: Harald Welte
CC: linux-mtd@lists.infradead.org
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: alsa-devel@alsa-project.org
Signed-off-by: Dominik Brodowski
09 Nov, 2009
1 commit
-
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.CC: linux-mtd@lists.infradead.org
CC: linux-usb@vger.kernel.org
Signed-off-by: Dominik Brodowski
23 Aug, 2008
4 commits
-
By passing the current Vcc setting to the pcmcia_config_loop callback
function, we can remove pcmcia_get_configuration_info() calls from many
drivers.Signed-off-by: Dominik Brodowski
-
Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.Signed-off-by: Dominik Brodowski
-
Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in
the pcmcia_config_loop() callback function. Therefore, factor it out.Signed-off-by: Dominik Brodowski
-
Use the config loop helper in misc pcmcia drivers.
CC: Harald Welte
CC:
CC: Russell King
CC: Ed Okerson
CC: linux-serial@vger.kernel.org
CC: boti@rocketmail.com
CC: linux-usb@vger.kernel.org
Signed-off-by: Dominik Brodowski
20 Jul, 2007
1 commit
-
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).
Here is a short excerpt of the semantic patch performing
this transformation:@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@x =
- kmalloc
+ kzalloc
(E1,E2)
... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);@@
expression E1,E2,E3;
@@- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau
Cc: Richard Henderson
Cc: Ivan Kokshaysky
Acked-by: Russell King
Cc: Bryan Wu
Acked-by: Jiri Slaby
Cc: Dave Airlie
Acked-by: Roland Dreier
Cc: Jiri Kosina
Acked-by: Dmitry Torokhov
Cc: Benjamin Herrenschmidt
Acked-by: Mauro Carvalho Chehab
Acked-by: Pierre Ossman
Cc: Jeff Garzik
Cc: "David S. Miller"
Acked-by: Greg KH
Cc: James Bottomley
Cc: "Antonino A. Daplas"
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
15 Feb, 2007
1 commit
-
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).Signed-off-by: Tim Schmielau
Acked-by: Russell King
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
05 Dec, 2006
2 commits
-
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost
all PCMICA driver right at the beginning, using the same calls but slightly
different implementations. Unfiy this in the PCMCIA core.Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused
label") from and Signed-off-by Adrian BunkSigned-off-by: Dominik Brodowski
-
As we read out the product information strings (VERS_1) from the PCMCIA device
in the PCMCIA core, and device drivers can access those reliably in struct
pcmcia_device's fields prod_id[], remove additional product information string
detection logic from PCMCIA device drivers.Signed-off-by: Dominik Brodowski
31 Mar, 2006
8 commits
-
Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.Signed-off-by: Dominik Brodowski
-
Remove the unused DEV_RELEASE_PENDING flag, and move the DEV_SUSPEND flag
into the p_dev structure, and make use of it at the core level.Signed-off-by: Dominik Brodowski
-
Most of the driver initialization isn't done in the .probe function, but in
the internal _config() functions. Make them return a value, so that .probe
can properly report whether the probing of the device succeeded or not.Signed-off-by: Dominik Brodowski
-
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now.
Therefore, remove all such indirections.Signed-off-by: Dominik Brodowski
-
Embed dev_link_t into struct pcmcia_device(), as they basically address the
same entity. The actual contents of dev_link_t will be cleaned up step by step.
This patch includes a bugfix from and signed-off-by Andrew Morton.Signed-off-by: Dominik Brodowski
-
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.Signed-off-by: Dominik Brodowski
-
In all but one case, the suspend and resume functions of PCMCIA drivers
contain mostly of calls to pcmcia_release_configuration() and
pcmcia_request_configuration(). Therefore, move this code out of the
drivers and into the core.Signed-off-by: Dominik Brodowski
-
Convert the remaining drivers which use pcmcia_release_io or
pcmcia_release_irq, and remove the EXPORT of these symbols.Signed-off-by: Dominik Brodowski
06 Jan, 2006
4 commits
-
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:int (*probe) (struct pcmcia_device *dev);
void (*remove) (struct pcmcia_device *dev);int (*suspend) (struct pcmcia_device *dev);
int (*resume) (struct pcmcia_device *dev);Signed-off-by: Dominik Brodowski
-
The linked list of devices managed by each PCMCIA driver is, in very most
cases, unused. Therefore, remove it from many drivers.Signed-off-by: Dominik Brodowski
-
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function.
Old functionality is preserved, for the moment.Signed-off-by: Dominik Brodowski
-
Move the suspend and resume methods out of the event handler, and into
special functions. Also use these functions for pre- and post-reset, as
almost all drivers already do, and the remaining ones can easily be
converted.Bugfix to include/pcmcia/ds.c
Signed-off-by: Andrew MortonSigned-off-by: Dominik Brodowski
08 Jul, 2005
2 commits
-
As a follow-up, remove the inclusion of pcmcia/version.h in many files.
Signed-off-by: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Move the "event handler" to struct pcmcia_driver -- the unified event handler
will disappear really soon, but switching it to struct pcmcia_driver in the
meantime allows for better "step-by-step" patches.Signed-off-by: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
28 Jun, 2005
1 commit
-
Add pcmcia_device_id table.
Signed-off-by: Dominik Brodowski
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
17 Apr, 2005
1 commit
-
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.Let it rip!
