09 Sep, 2005
40 commits
-
Rework the 68x328 configuration and setup code. All 68x328 varient
share the same timer hardware, so extract that into its own file,
instead of keeping copies in each processors setup code.Signed-off-by: Greg Ungerer
Signed-off-by: Linus Torvalds -
Create common 68VZ328 config code. It is essentially the same for
all boards that use this, so no point having a version of it for
each.Signed-off-by: Greg Ungerer
Signed-off-by: Linus Torvalds -
Remove DragonEngine2 specific config code. Use common 68VZ328 config
code now.Signed-off-by: Greg Ungerer
Signed-off-by: Linus Torvalds -
Remove uCdimm specific config code. Use common 68VZ328 config code now.
Signed-off-by: Greg Ungerer
Signed-off-by: Linus Torvalds -
Signed-off-by: Greg Ungerer
Signed-off-by: Linus Torvalds -
Add processor level and clock support defines for the ColdFire 523x
processor.Signed-off-by: Greg Ungerer
Signed-off-by: Linus Torvalds -
ColdFire 523x processor hardware register definitions.
Signed-off-by: Greg Ungerer
Signed-off-by: Linus Torvalds -
Signed-off-by: Henk Vergonet
Signed-off-by: Greg Kroah-Hartman -
sparse still complains about the htons usage, but I'll leave that for
others to fix.Signed-off-by: Greg Kroah-Hartman
-
This patch aggregates all modifications in the -mm tree and adds
complete ringtone support.The following features are supported:
- keyboard full support
- LCD full support
- LED full support
- dialtone full support
- ringtone full support
- audio playback via generic usb audio diver
- audio record via generic usb audio diverFor driver documentation see: Documentation/input/yealink.txt
For vendor documentation see: http://yealink.comSigned-off-by: Henk
Signed-off-by: Greg Kroah-Hartman -
As sugested by Alan Stern here are a few code cleanups for onetouch.c:
-Check number of endpoints before directly referencing intf->endpoint[2]
-Use defined constants instead of magic numbers
-Revmove the non-ascii characters from copyright notice
-Make registration and deregistration messages more similarSigned-off-by: Nick Sillik
Signed-off-by: Greg Kroah-Hartman -
This code looks at urb->transfer_dma, maps the page and takes the data.
I am looking for volunteers to contribute architectures other than i386
or to develop an architecure-neutral API for it (or point me that it
was done already).Signed-off-by: Pete Zaitcev
Signed-off-by: Greg Kroah-Hartman -
This adds the field tt_usecs to ehci_qh and ehci_iso_stream, and sets it
appropriately when setting them up as periodic endpoints. It records
the transation translator's think_time (added in last patch) plus the
downstream (i.e. low or full speed) bustime of the transfer associated
with each interrupt or iso frame, as calculated by usb_calc_bus_time.Signed-off-by: Dan Streetman
Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This adds think_time to the usb_tt struct and sets it appropriately
(measured in ns); this can help us implement better split transaction
scheduling.Signed-off-by: Dan Streetman
Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This wraps up the conversion of the "usbnet" driver structure, by
moving the Prolific PL-2201/2302 minidriver to a module of its own.
It also includes some minor cleanups to the remaining "usbnet" file,
notably removing that long changelog at the top.Minor historical note: Linux 2.2 first called the driver for
this hardware "plusb".Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This adds host-side RNDIS support to the "usbnet" driver, so Linux can talk
to various devices (often based on WinCE) that otherwise only Windows could
talk to.Tested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based
peripheral. This also includes updates from Eddie C. Dost
for big-endian SPARC Linux talking to a Nokia 9500 Communicator.It's still marked as EXPERIMENTAL because this code is so young. This
ought to let Linux to work with various cable modems that previously
would have been "Windows Only".Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
Makes the CDC Ethernet support live in a separate driver module.
This module is a bit special since it exports utility functions
that are reused by the the Zaurus and RNDIS drivers, but it's
not "core" like usbnet itself.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This moves usbnet support for Zaurus and compatibles into its own module.
Other than exporting a couple of helper functions, this just involved
shuffling some code and updating the comments.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This moves the GeneSys GL620USB-A support into its own driver file.
It also fixes a "return wrong skb" glitch in the rx unbatching, as
recently reported, and adds some missing byteswaps in the special
"genelink" headers (so it might now work on big-endian Linux).Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
As with the "cdc_subset" and "asix" drivers, this just moves the net1080
support into its one driver module. In this case there's a small bit of
extra cleanup involved, moving some funky framing logic into the tx_fixup()
routine (resolving a long overdue FIXME).Minor historical note: "usbnet" started out as "net1080", then got
generalized to make it easier for other network drivers to reuse the
urb queueing and fault management code here.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This patch moves the ASIX AX8817x driver into its own file, just using
the "usbnet" infrastructure as a utility library.- As with "cdc_subset" this involved minor Kconfig/kbuild tweaks,
moving code from one file to another, and exporting a few functions.- This includes updates from Jamie Painter to add (and use) a new hook
to handle the different maximum transfer sizes for rx and tx sides.- Also from Jamie, some bugfixes:
* MDIO byteorder (to address some PPC media negotiation problems);
* Force alignment at key spots when using ax88772 framing (on some
embedded hardware, the network stack will break otherwise);
* Address some link reset problems.It also makes this driver use the standard (5 seconds vs half second)
control timeouts used elsewhere in USB; and wraps a few lines before
the 80th column (which previously needed it).Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This patch creates the first of several separate "minidriver" modules
for "usbnet". This one handles only the very simplest hardware, which
can be handled almost entirely by the "usbnet" core.- Move device-specific bits into new "cdc_subset.c" driver,
shrinking "usbnet" by a bunch;- Export the functions needed to support this minidriver
(with EXPORT_SYMBOL_GPL);- Update Kconfig and kbuild accordingly.
This one handles about a dozen different device types, with the most
notable ones being Gumstix and most Linux-based PDAs (except Zaurus
running that ancient code from Sharp).Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This starts to prepare the core of "usbnet" to know less about various
framing protocols that map Ethernet packets onto USB, so "minidrivers"
can be modules that just plug into the core.- Remove some framing-specific code that cluttered the core:
* net->hard_header_len records how much space to preallocate;
now drivers that add their own framing (Net1080, GeneLink,
Zaurus, and RNDIS) will have smoother TX paths. Even for
the drivers (Zaurus, Net1080) that need trailers.* defines new dev->hard_mtu, using this "hardware" limit to
check changes to the link's settable "software" mtu.* now net->hard_header_len and dev->hard_mtu are set up in the
driver bind() routines, if needed.- Transaction ID is no longer specific to the Net1080 framing;
RNDIS needs one too.- Creates a new "usbnet.h" header with declarations that are shared
between the core and what will be separate modules.- Plus a couple other minor tweaks, like recognizing -ESHUTDOWN
means the keventd work should just shut itself down asap.The core code is only about 1/3 of this large file. Splitting out the
minidrivers into separate modules (e.g. ones for ASIX adapters,
Zaurii and similar, CDC Ethernet, etc), in later patches, will
improve maintainability and shrink typical runtime footprints.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
Fix
drivers/usb/misc/ldusb.c: In function `ld_usb_read':
drivers/usb/misc/ldusb.c:467: warning: int format, different type arg (arg 4)
drivers/usb/misc/ldusb.c: In function `ld_usb_write':
drivers/usb/misc/ldusb.c:531: warning: int format, different type arg (arg 4)
drivers/usb/misc/ldusb.c:532: warning: int format, different type arg (arg 5)
drivers/usb/misc/ldusb.c:532: warning: int format, different type arg (arg 6)Signed-off-by: Alexey Dobriyan
Signed-off-by: Greg Kroah-Hartman -
Deprecate the OSS USB drivers.
This patch includes spelling fixes by Lee Revell.
Signed-off-by: Adrian Bunk
Signed-off-by: Greg Kroah-Hartman -
ohci-ppc-soc.c provides for a platform-specific callback mechanism for
when the HC is successfully probed or removed. It turned out that none
of the 3 platforms using it need this facility. Also the required
include/asm-ppc/usb.h has never been accepted. This patch removes the
callback feature and the include of .Signed-off-by: Dale Farnsworth
Signed-off-by: Greg Kroah-Hartman -
Avoid an annoying message that can appear if devices are disconnected
in the middle of a USB scatterlist operation.Message noted in http://bugzilla.kernel.org/show_bug.cgi?id=4373
(but the real issue there seems to be a SCSI level hang).Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
Use a more correct calculation for highspeed bit times.
http://bugzilla.kernel.org/show_bug.cgi?id=3604
This sort if thing might start to make a difference now that the high
speed periodic scheduler is more complete -- and even getting used.Signed-off-by: David Brownell
Signed-off-by: Greg Kroah-Hartman -
This patch (as556) adds support for unbinding the usb_generic "driver".
That driver only binds to USB devices, as opposed to interfaces, and it
does nothing much besides marking which struct device's go with an
overall USB device plus providing suspend/resume methods. Now that
users can unbind drivers at will using the sysfs "unbind" attribute, we
need a rational way of dealing with USB devices that are no longer under
full control of the USB stack. The patch handles this by unconfiguring
the device, thereby removing all the interfaces and their associated
drivers and children.Signed-off-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
This patch (as555) modifies the already-awkward
usb_lock_device_for_reset routine in usbcore by adding a timeout. The
whole point of the routine is that the caller wants to acquire some
semaphores in the wrong order; protecting against the possibility of
deadlock by timing out seems only prudent.Signed-off-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
Signed-off-by: Dale Farnsworth
Signed-off-by: Greg Kroah-Hartman -
Fix the port numbering confusion for the S3C24XX platform device
information as reported by RudyThis patch ensurs that the the ports are numbered 0 and 1.
Signed-off-by: Ben Dooks
Signed-off-by: Greg Kroah-Hartman -
This patch (as554) makes the hub driver disconnect any child USB devices
when it is unbound from a hub. Normally this will never happen, but
there are a few oddball ways to unbind the hub driver while leaving the
children intact. For example, the new "unbind" sysfs attribute can be
used for this purpose.Given that unbinding hubs with children is now safe, the patch also
removes the code that prevented people from doing so using usbfs.Signed-off-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
This patch (as553) merely moves some code and deletes an unneeded test in
the hub driver. This is in preparation for the patch that follows.Signed-off-by: Alan Stern
Signed-off-by: Greg Kroah-Hartman -
Adding flash-device support to the shuttle_usbat driver in 2.6.11
introduced the need to detect which type of device we are dealing with:
CDRW drive, or flash media reader.The detection routine used turned out to not work for HP8200 CDRW users,
who saw their devices being detected as a flash disk.This patch (which has been tested on both flash and cdrom) removes some
unnecessary code, moves device detection to much later during
initialization, and introduces a new detection routine which appears to
work.Signed-off-by: Daniel Drake
Signed-off-by: Greg Kroah-Hartman -
Signed-off-by: Greg Kroah-Hartman
