15 Jan, 2012
1 commit
-
2nd round of GPIO changes for v3.3 merge window
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion
gpio: pl061: remove combined interrupt
gpio: pl061: convert to use generic irq chip
GPIO: add bindings for managed devices
ARM: realview: convert pl061 no irq to 0 instead of -1
gpio: pl061: convert to use 0 for no irq
gpio: pl061: use chained_irq_* functions in irq handler
GPIO/pl061: Add suspend resume capability
drivers/gpio/gpio-tegra.c: use devm_request_and_ioremap
14 Jan, 2012
2 commits
-
The existing gpio_to_irq() implementation on sa1100 only translates
validly for internal GPIOs. Since this sub-arch enables GPIOLIB
support, this results in buggy translations for non-internal GPIOs.Get rid of the private gpio_to_irq() implementation, replacing it
with the .to_irq method in the sa1100 gpio chip instead.Signed-off-by: Russell King
Acked-by: Linus Walleij
Signed-off-by: Grant Likely -
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
rtc: max8925: Add function to work as wakeup source
mfd: Add pm ops to max8925
mfd: Convert aat2870 to dev_pm_ops
mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
mfd: Introduce missing kfree in 88pm860x probe routine
mfd: Add S5M series configuration
mfd: Add s5m series irq driver
mfd: Add S5M core driver
mfd: Improve mc13xxx dt binding document
mfd: Fix stmpe section mismatch
mfd: Fix stmpe build warning
mfd: Fix STMPE I2c build failure
mfd: Constify aat2870-core i2c_device_id table
gpio: Add support for stmpe variant 801
mfd: Add support for stmpe variant 801
mfd: Add support for stmpe variant 610
mfd: Add support for STMPE SPI interface
mfd: Separate out STMPE controller and interface specific code
misc: Remove max8997-muic sysfs attributes
mfd: Remove unused wm831x_irq_data_to_mask_reg()
...Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.
12 Jan, 2012
1 commit
-
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
PCI: Increase resource array mask bit size in pcim_iomap_regions()
PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
x86/PCI: amd: factor out MMCONFIG discovery
PCI: Enable ATS at the device state restore
PCI: msi: fix imbalanced refcount of msi irq sysfs objects
PCI: kconfig: English typo in pci/pcie/Kconfig
PCI/PM/Runtime: make PCI traces quieter
PCI: remove pci_create_bus()
xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
sparc/PCI: convert to pci_create_root_bus()
sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
powerpc/PCI: convert to pci_create_root_bus()
powerpc/PCI: split PHB part out of pcibios_map_io_space()
...Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
to the same patches being applied in other branches.
10 Jan, 2012
1 commit
-
Conflicts:
arch/arm/mach-mxs/include/mach/common.hPull in previous samsung conflict merges and do a trivial
merge of an mxs double-add conflict.Signed-off-by: Arnd Bergmann
09 Jan, 2012
2 commits
-
Make use of memory resources rather than hardcoded IO adresses.
This is a first step towards DT support.Signed-off-by: Jochen Friedrich
Signed-off-by: Samuel Ortiz -
Signed-off-by: Jochen Friedrich
Signed-off-by: Samuel Ortiz
07 Jan, 2012
1 commit
-
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups. This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.CC: Russell King
Signed-off-by: Bjorn Helgaas
Signed-off-by: Jesse Barnes
05 Jan, 2012
6 commits
-
Conflicts:
arch/arm/mach-exynos/cpu.cThe changes to arch/arm/mach-exynos/cpu.c were moved to
mach-exynos/common.c. -
Conflicts:
arch/arm/kernel/setup.c
arch/arm/mach-shmobile/board-kota2.c -
Fixed up a simple typo in the runtime sched_clock conversion
so we compile again.Cc: Kristoffer Ericson
Acked-by: Marc Zyngier
Signed-off-by: Linus Walleij
Signed-off-by: Russell King -
Remove the now empty arch_reset() from all the mach/system.h includes,
and remove its callsite. Remove arm_machine_restart() as this function
no longer does anything useful.For samsung platforms, remove the include of mach/system-reset.h and
plat/system-reset.h from their respective mach/system.h headers as these
just define their arch_reset functions. As a result, the s3c2410 and
plat-samsung system-reset.h files are no longer referenced, so remove
these files entirely.Acked-by: Nicolas Pitre
Acked-by: H Hartley Sweeten
Acked-by: Jamie Iles
Acked-by: Tony Lindgren
Acked-by: Linus Walleij
Signed-off-by: Russell King -
Hook these platforms restart code into the new restart hook rather
than using arch_reset().Signed-off-by: Russell King
-
Conflicts:
arch/arm/kernel/setup.c
04 Jan, 2012
1 commit
-
Fixes this build error:
arch/arm/mach-sa1100/nanoengine.c:75:11: error: 'PAGE_SHIFT' undeclared here (not in a function)
CC: Marcelo Roberto Jimenez
Signed-off-by: Bjorn Helgaas
Signed-off-by: Russell King
28 Dec, 2011
2 commits
-
Signed-off-by: Jett.Zhou
Acked-by: Haojian Zhuang
Acked-by: Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Arnd Bergmann -
Since the regmap of rtc on sa1100, pxa and mmp Marvell soc families are
almost the same, so re-arch the rtc-sa1100 to support them.Signed-off-by: Jett.Zhou
Acked-by: Arnd Bergmann
Acked-by: Haojian Zhuang
Acked-by: Robert Jarzmik
Signed-off-by: Arnd Bergmann
19 Dec, 2011
1 commit
-
sched_clock() is yet another blocker on the road to the single
image. This patch implements an idea by Russell King:http://www.spinics.net/lists/linux-omap/msg49561.html
Instead of asking the platform to implement both sched_clock()
itself and the rollover callback, simply register a read()
function, and let the ARM code care about sched_clock() itself,
the conversion to ns and the rollover. sched_clock() uses
this read() function as an indirection to the platform code.
If the platform doesn't provide a read(), the code falls back
to the jiffy counter (just like the default sched_clock).This allow some simplifications and possibly some footprint gain
when multiple platforms are compiled in. Among the drawbacks,
the removal of the *_fixed_sched_clock optimization which could
negatively impact some platforms (sa1100, tegra, versatile
and omap).Tested on 11MPCore, OMAP4 and Tegra.
Cc: Imre Kaloz
Cc: Eric Miao
Cc: Colin Cross
Cc: Erik Gilling
Cc: Olof Johansson
Cc: Sascha Hauer
Cc: Alessandro Rubini
Cc: STEricsson
Cc: Lennert Buytenhek
Cc: Ben Dooks
Tested-by: Jamie Iles
Tested-by: Tony Lindgren
Tested-by: Kyungmin Park
Acked-by: Linus Walleij
Acked-by: Nicolas Pitre
Acked-by: Krzysztof Halasa
Acked-by: Kukjin Kim
Signed-off-by: Marc Zyngier
Signed-off-by: Russell King
08 Dec, 2011
1 commit
-
arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error
make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1
make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2
make: *** [uImage] Error 2Signed-off-by: Haojian Zhuang
Signed-off-by: Jett.Zhou
06 Dec, 2011
1 commit
27 Nov, 2011
1 commit
-
Signed-off-by: Nicolas Pitre
21 Nov, 2011
1 commit
-
We only need to set the system up for a soft-restart if we're going to
be doing a soft-restart. Provide a new function (soft_restart()) which
does the setup and final call for this, and make platforms use it.
Eliminate the call to setup_restart() from the default handler.This means that platforms arch_reset() function is no longer called with
the page tables prepared for a soft-restart, and caches will still be
enabled.Acked-by: Nicolas Pitre
Acked-by: Will Deacon
Acked-by: H Hartley Sweeten
Acked-by: Kukjin Kim
Acked-by: Sascha Hauer
Acked-by: Viresh Kumar
Acked-by: Krzysztof Ha■asa
Acked-by: Paul Mundt
Acked-by: Richard Purdie
Acked-by: Wan ZongShun
Acked-by: Eric Miao
Signed-off-by: Russell King
01 Nov, 2011
1 commit
-
Add the include to fix things like this:
arch/arm/mach-sa1100/jornada720.c:278: error: 'PAGE_SHIFT' undeclared here (not in a function)
arch/arm/mach-bcmring/mm.c:32: error: 'PAGE_SHIFT' undeclared here (not in a function)
arch/arm/mach-sa1100/collie.c:361: error: 'PAGE_SHIFT' undeclared here (not in a function)Signed-off-by: Paul Gortmaker
29 Oct, 2011
1 commit
-
…git-cur/linux-2.6-arm
* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits)
ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET
ARM: gic, local timers: use the request_percpu_irq() interface
ARM: gic: consolidate PPI handling
ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H
ARM: mach-s5p64x0: remove mach/memory.h
ARM: mach-s3c64xx: remove mach/memory.h
ARM: plat-mxc: remove mach/memory.h
ARM: mach-prima2: remove mach/memory.h
ARM: mach-zynq: remove mach/memory.h
ARM: mach-bcmring: remove mach/memory.h
ARM: mach-davinci: remove mach/memory.h
ARM: mach-pxa: remove mach/memory.h
ARM: mach-ixp4xx: remove mach/memory.h
ARM: mach-h720x: remove mach/memory.h
ARM: mach-vt8500: remove mach/memory.h
ARM: mach-s5pc100: remove mach/memory.h
ARM: mach-tegra: remove mach/memory.h
ARM: plat-tcc: remove mach/memory.h
ARM: mach-mmp: remove mach/memory.h
ARM: mach-cns3xxx: remove mach/memory.h
...Fix up mostly pretty trivial conflicts in:
- arch/arm/Kconfig
- arch/arm/include/asm/localtimer.h
- arch/arm/kernel/Makefile
- arch/arm/mach-shmobile/board-ap4evb.c
- arch/arm/mach-u300/core.c
- arch/arm/mm/dma-mapping.c
- arch/arm/mm/proc-v7.S
- arch/arm/plat-omap/Kconfig
largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP ->
CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and
addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
27 Oct, 2011
1 commit
-
* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits)
ARM: 7135/1: ep93xx: bring back missing
ARM: 7104/1: plat-pxa: break out GPIO driver specifics
ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics
ARM: 7101/1: arm/tegra: Replace with
ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h
ARM: 7083/1: rewrite U300 GPIO to use gpiolib
ARM: 7074/1: gpio: davinci: eliminate unused variable warnings
ARM: 7063/1: Orion: gpio: add missing include of linux/types.h
ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build
ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio
ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq
ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio
ARM: 7057/1: mach-pnx4008: rename GPIO header
ARM: 7056/1: plat-nomadik: kill off
ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function
ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem
ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics
ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem
ARM: 7043/1: mach-ixp2000: rename GPIO header
...Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
25 Oct, 2011
2 commits
-
Conflicts:
arch/arm/mach-integrator/integrator_ap.c -
…'pgt' (early part) and 'smp' into for-linus
17 Oct, 2011
6 commits
-
Get rid of the mdesc pointer in the fixup function call. No one uses
the mdesc pointer, it shouldn't be modified anyway, and we can't wrap
it, so let's remove it.Platform files found by:
$ regexp=$(git grep -h '\.fixup.*=' arch/arm |
sed 's!.*= *\([^,]*\),* *!\1!' | sort -u |
tr '\n' '|' | sed 's,|$,,;s,|,\\|,g')
$ git grep $regexp arch/armAcked-by: Nicolas Pitre
Signed-off-by: Russell King -
Remove the legacy ARM LED code for simpad devices and
register a stadard LED platform device using GPIO line
instead.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King -
Register keyboard, polled keyboard and I2C platform
devices based on GPIOs.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King -
- prepend CS3 accessors by simpad_ to indicate they
are specific to simpad devices.
- use spinlock to protect shadow register.
- implement 8 read-only pins.
- use readl/writel macros so barriers are used where
necessary.
- register CS3 as GPIO controller with 24 pins
(16 output only and 8 input only).
- fix PCMCIA driver to access the read-only pins
rather than the shadow register for status bits.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King -
Add ucb1x00 GPIO definitions to simpad.h and add gpio_base
to ucb1x00 platform device so the pins are available using
the GPIO API.Signed-off-by: Jochen Friedrich
Signed-off-by: Russell King -
Boards used to specify zreladdr in their Makefile.boot with
zreladdr-y := x, so conflicting zreladdrs were silently overwritten.
This patch changes this to zreladdr-y += x, so that we end
up with multiple words in zreladdr in such a case. We can
detect this later and complain if necessary.Signed-off-by: Sascha Hauer
Signed-off-by: Russell King
26 Sep, 2011
1 commit
-
Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use. Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.Signed-off-by: nicolas Pitre
Reviewed-by: Kevin Hilman
22 Aug, 2011
3 commits
-
This function is not used in the assabet build, and on the whole the
call is hard to consolidate so get rid of it from this machine.Signed-off-by: Linus Walleij
Signed-off-by: Russell King -
As per example from the other ARM boards, push the SA100
GPIO driver down to the GPIO subsystem so it can be consolidated.Signed-off-by: Linus Walleij
Signed-off-by: Russell King -
Signed-off-by: Nicolas Pitre
Acked-by: Arnd Bergmann
17 Aug, 2011
1 commit
-
SA11x0 only uses IO_SPACE_LIMIT for SOC_COMMON, so we can use the
default value in asm/io.h.Signed-off-by: Russell King
12 Aug, 2011
1 commit
-
Rather than marking the mach/gpio.h header files which want to use the
trivial GPIOLIB implementation, mark those which do not want to use it
instead. This means that by default, you get the trivial implementation
and only have to do something extra if you need to. This should
encourage the use of the trivial default implementation.As an additional bonus, several gpio.h header files become empty.
Acked-by: H Hartley Sweeten
Tested-by: Jamie Iles
Acked-by: Kukjin Kim
Signed-off-by: Russell King
11 Aug, 2011
1 commit
-
The PCI nanoengine driver in the SA1100 machine probably has not
been building for some time. It probably dragged hardware.h
in implicitly and now it doesn't anymore. After this an SA1100
build selecting all system variants will build successfully.Signed-off-by: Linus Walleij