05 Jan, 2012
1 commit
-
Hook these platforms restart code into the new restart hook rather
than using arch_reset().Signed-off-by: Russell King
22 Aug, 2011
1 commit
-
Signed-off-by: Nicolas Pitre
Acked-by: Arnd Bergmann
20 Oct, 2010
1 commit
-
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.The various declarations were removed using the following script:
grep -rl MACHINE_START arch/arm | xargs \
sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'[ Initial patch was from Jeremy Kerr, example script from Russell King ]
Signed-off-by: Nicolas Pitre
Acked-by: Eric Miao
07 Dec, 2009
20 commits
-
Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
After a code reorganization and following split, there's some #includes
now unused. Clean them up and sort remaining alphabetticaly where possible.Compile tested.
Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Correct boilerplates after files split. Also shorten them a bit - use
standart GPL wording (as per http://lkml.org/lkml/2007/5/1/220) and
drop changelog, which only entry about h3800 support and abstracted
EGPIOs is just confusing now, as both of these features are gone.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Split common h3600.c into three separate files: h3100.c, h3600.c and
h3xxx.c (the latter contains common code for h3100/h3600)
Copyright boilerplates and #includes are copied intact and will be
cleaned up later.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Combine both headers into one, rename to h3xxx.h and change all
users accordingly.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
After conversion to gpiolib there's still some GPIOs left, that get
configured in *_mach_init() as outputs (using direct operations
on GPCR/GPDR registers), but otherwise unused. These GPIOs are mainly
sound related and should be configured by corresponding driver once
it is written.Drop this initialisation and configure all GPIOs as input.
Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
As all users of assign_h3600_egpio now converted to gpiolib, we
can safely remove all assign_h3600_egpio handling code and
definitions.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Use of gpio_request/gpio_free in some callbacks may look ugly, but
corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet)
init/exit hooks and registering these gpios in *_mach_init is also
not possible, because htc-gpio driver starts a bit later...Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
It will be used for future conversion of assign_h3600_egpio calls to
gpiolib.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
h3100 and h3600 have different sets of LCD-controlling gpios,
which mapped to the same "abstracted" EGPIO.
As we plan to get rid of those abstracted egpios completely, we
need to separate these helper functions.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
sa1100_fb driver handles this
Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
IRDA is handled by separate sa1100-ir driver and has
nothing to do with sa1100_serialSigned-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
The rtc-sa1100 driver takes care of this.
Signed-off-by: Russell King
-
No point calling sa1100_register_uart_fns early - these aren't
used until late in the boot sequence. Also convert to gpiolib
support.Signed-off-by: Russell King
-
Signed-off-by: Russell King
-
Signed-off-by: Russell King
-
Signed-off-by: Russell King
-
Signed-off-by: Russell King
-
Only register devices if we have platform data for those which require
platform data.Signed-off-by: Russell King
16 Mar, 2009
4 commits
-
Since now ipaq_model_ops used only for accessing h3600 EGPIOs,
drop it completely and use assign_h3600_egpio() directly.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Replace all occurences with assign_h3600_egpio.
Also simplify code a bit by replacing couple of if-else
statements with one-line equivalents.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Remove unused fields and associated funtions-accesors.
Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King -
Right now iPaq h3600's default MTD partitions table is a mess. It has
two #ifdefs with #else, giving total 3 variants, depending on your
kernel config. Replace all this with simple two-partitions scheme
(bootloader + rootfs), that used by both shipped WindowsCE and
most of the linux distributions (Familiar, Angstrom)Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King
22 Feb, 2009
1 commit
-
Code has never been in buildable state since initial
merge.Signed-off-by: Dmitry Artamonow
Signed-off-by: Russell King
07 Aug, 2008
2 commits
-
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King
-
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.Signed-off-by: Russell King
27 Jul, 2008
1 commit
-
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/gSigned-off-by: Dmitry Baryshkov
Signed-off-by: Russell King
06 Mar, 2008
1 commit
-
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison
Signed-off-by: Andrew Morton
Signed-off-by: Russell King
09 May, 2007
1 commit
-
Add IRQF_IRQPOLL for each timer interrupt.
Signed-off-by: Bernhard Walle
Cc: Russell King
Cc: Ingo Molnar
Cc: Thomas Gleixner
Cc: Alan Cox
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
30 Nov, 2006
1 commit
-
set_irq_chipdata -> set_irq_chip_data
get_irq_chipdata -> get_irq_chip_data
do_level_IRQ -> handle_level_irq
do_edge_IRQ -> handle_edge_irq
do_simple_IRQ -> handle_simple_irq
irqdesc -> irq_desc
irqchip -> irq_chipSigned-off-by: Russell King
07 Oct, 2006
1 commit
-
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.Signed-off-by: Linus Torvalds
03 Jul, 2006
1 commit
-
The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.Use the new IRQF_ constants and remove the SA_INTERRUPT define
Signed-off-by: Thomas Gleixner
Signed-off-by: Linus Torvalds
02 Jul, 2006
1 commit
-
Patch from Thomas Gleixner
From: Thomas Gleixner
Fixup the conversion to generic irq subsystem.
Signed-off-by: Thomas Gleixner
Signed-off-by: Ingo Molnar
Signed-off-by: Russell King
01 Jul, 2006
1 commit
-
Signed-off-by: Jörn Engel
Signed-off-by: Adrian Bunk
14 Jan, 2006
1 commit
-
Patch from Nicolas Pitre
This field is redundent since it must be equal to PHYS_OFFSET anyway.
Now that no code uses it anymore, mark it deprecated and remove all
initializations from the tree.Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King
28 Oct, 2005
1 commit
-
Patch from Deepak Saxena
SA1100 map_desc.pfn conversion
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King
