09 Jan, 2012
1 commit
-
Macro name for spi controller driver has been modified, so update default
board file accordingly.Signed-off-by: Sonic Zhang
Signed-off-by: Bob Liu
14 Nov, 2011
2 commits
-
Commit 8dc7a9c84 ("blackfin: Add export.h to files using
EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into
sections protected by an unrelated #if CONFIG_... statement. This can cause,
depending on the configuration used, warnings like this one:arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declarationThis patch fixes it by moving the includes out of the #if protected sections.
Signed-off-by: Lars-Peter Clausen
Acked-by: Mike Frysinger
Signed-off-by: Bob Liu -
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
Signed-off-by: Bob Liu
01 Nov, 2011
1 commit
-
These particular files were just assuming that module.h was
somehow in the include paths. Give them the more minimalist
header file explicitly.Signed-off-by: Paul Gortmaker
23 Jul, 2011
1 commit
-
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant. So punt
those parts.Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.Signed-off-by: Mike Frysinger
10 Jan, 2011
3 commits
-
Signed-off-by: Mike Frysinger
-
The SPORT/UART driver doesn't use the secondary channel pins, so don't
try and request them thus keeping other drivers from using them.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger -
In order to not touch the driver file for different xtal usage,
push the clkin value to board file and calculate the register
value instead of hardcoding it.Signed-off-by: Bob Liu
Signed-off-by: Mike Frysinger
10 Dec, 2010
2 commits
-
Just adding its own platform_driver, not really
using it yet.Later patches will come to split power management
code from musb_core and move it completely to HW
glue layer.Signed-off-by: Felipe Balbi
-
change all ocurrences of musb_hdrc to musb-hdrc.
We will call glue layer drivers musb-,
so in order to keep things somewhat standard, let's
change the underscore into a dash.Signed-off-by: Felipe Balbi
01 Dec, 2010
1 commit
-
Soon resource data will get automatically
populated from a set of autogenerated data
from TI's hardware database for the OMAP
platform.Such database, might not have resources at
the expected order by the current drivers.While we could hack in some exceptions to
that tool to generate resources in a specific
order, it seems less fragile to use the
resource name instead. That way, no matter
what order the resources are generated, the
driver still work.Modified the OMAP, Blackfin and Davinci
architecture files to add the name of the IRQs
in the resource structures and musb driver to
use the platform_get_irq_byname() api to get
the device and dma irq numbers instead of using
the index.Cc: Tony Lindgren
Acked-by: Kevin Hilman
Acked-by: Mike Frysinger
Signed-off-by: Hema HK
Signed-off-by: Felipe Balbi
25 Oct, 2010
1 commit
-
Move all the pin settings out of the Kconfig and into the platform
resources (MII vs RMII). This clean up also lets us push out the
phy settings so that board porters may control the layout.Signed-off-by: Sonic Zhang
Acked-by: David S. Miller
Signed-off-by: Mike Frysinger
22 Oct, 2010
1 commit
-
Since these boards can boot out of NAND, make sure we give u-boot its
own partition by default to avoid clobbering it.Signed-off-by: Mike Frysinger
28 Aug, 2010
1 commit
-
Now that the driver for the Blackfin on-chip NFC no longer uses/respects
the page_size from the platform resources (figures out the needs on the
fly), drop it from the platform resources. This fixes some build errors
since the defines no longer exists.Signed-off-by: Barry Song
Signed-off-by: Mike Frysinger
21 May, 2010
1 commit
-
These boards all have the GPIO VRSEL hooked up as an active high.
Signed-off-by: Cliff Cai
Signed-off-by: Mike Frysinger
09 Mar, 2010
5 commits
-
Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger -
This lets us support the new BF527-EZKIT V2.1 via platform resources
tweaks only.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger -
This lets people easily select the UART/SPORT consoles for early printk
while leveraging the pins declared in the boards file.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger -
Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file. This lets people easily select the specific pins/ports for
the normal emulated UART as well as GPIOs for CTS/RTS.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger -
Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file. This lets people easily select the specific pins/ports for
the normal UART as well as GPIOs for CTS/RTS.Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
08 Oct, 2009
1 commit
-
The simple-gpio has been replaced by the gpio sysfs interface, so drop the
unused simple-gpio resources from all Blackfin boards.Signed-off-by: Mike Frysinger
07 Oct, 2009
1 commit
-
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.It also removes:
- verbose GPL text(refer to the top level ./COPYING file)
- file names (you are looking at the file)
- bug url (it's in the ./MAINTAINERS file)
- "or later" on GPL-2, when we did not have that rightIt also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).Signed-off-by: Robin Getz
Signed-off-by: Mike Frysinger
17 Sep, 2009
2 commits
-
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.Signed-off-by: Mike Frysinger
-
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the
defines in the board resources accordingly.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
16 Jul, 2009
1 commit
-
The sed used to rename the bfin-twi-lcd only replaced the first instance
rather than all which led to the resources not being enabled when the
driver was built as a module.Signed-off-by: Michael Hennerich
Signed-off-by: Mike Frysinger
23 Jun, 2009
1 commit
-
The BF526-EZBRD has a SST SPI flash on it, not a ST Micro.
Signed-off-by: Graf Yang
Signed-off-by: Mike Frysinger
13 Jun, 2009
1 commit
-
The Blackfin SPI driver can be driven by an IRQ now, so declare it in
the board resources.Signed-off-by: Yi Li
Signed-off-by: Mike Frysinger
12 Jun, 2009
1 commit
-
Try to keep the naming conventions consistent, so:
SPI_ADC_BF533 -> BFIN_SPI_ADC
TWI_LCD -> BFIN_TWI_LCDSigned-off-by: Mike Frysinger
06 Mar, 2009
1 commit
-
Signed-off-by: Mike Frysinger
Signed-off-by: Michael Hennerich
Signed-off-by: Bryan Wu
04 Feb, 2009
4 commits
-
…orm resources to board files
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org> -
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu -
Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this
already by stubbing things outSigned-off-by: Mike Frysinger
Signed-off-by: Bryan Wu -
[Mike Frysinger :
- setup P_DEFAULT_BOOT_SPI_CS for every arch based on
the default bootrom behavior and convert all our boards
to it
- revert previous anomaly change ... bf51x is not affected
by anomaly 05000353]Signed-off-by: Sonic Zhang
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
07 Jan, 2009
3 commits
-
Signed-off-by: Michael Hennerich
Signed-off-by: Bryan Wu -
Blackfin MUSB has 8 endpoints including ep0 and 8 dma channels not 7
Signed-off-by: Bryan Wu
-
Signed-off-by: Graf Yang
Signed-off-by: Bryan Wu
18 Nov, 2008
1 commit
-
Cc: Graf Yang
Signed-off-by: Mike Frysinger
Signed-off-by: Bryan Wu
13 Oct, 2008
1 commit
-
Signed-off-by: Michael Hennerich
Signed-off-by: Bryan Wu