08 Apr, 2020
1 commit
-
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
...
25 Mar, 2020
1 commit
-
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada
Signed-off-by: Greg Kroah-Hartman
23 Mar, 2020
1 commit
-
Added new PCI id for Tiger Lake processor thermal device along with
MMIO RAPL support.Signed-off-by: Sumeet Pawnikar
Signed-off-by: Zhang Rui
Signed-off-by: Daniel Lezcano
Link: https://lore.kernel.org/r/1583489952-29612-1-git-send-email-sumeet.r.pawnikar@intel.com
24 May, 2019
1 commit
-
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 or
later as published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more detailsextracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 6 file(s).
Signed-off-by: Thomas Gleixner
Reviewed-by: Richard Fontana
Reviewed-by: Allison Randal
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075211.856638608@linutronix.de
Signed-off-by: Greg Kroah-Hartman
04 Jan, 2019
1 commit
-
Using -O3 instead of -O1 if it's supported by compiler.
Signed-off-by: Jiri Olsa
Cc: Alexander Shishkin
Cc: Brian Norris
Cc: Markus Mayer
Cc: Namhyung Kim
Cc: Peter Zijlstra
Cc: Zhang Rui
Link: http://lkml.kernel.org/r/20190103161350.11446-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo
29 Dec, 2018
1 commit
-
So that the user can provide, e.g. distro package alternative values.
Signed-off-by: Jiri Olsa
Cc: Brian Norris
Cc: Herton Krzesinski
Cc: Markus Mayer
Cc: Zhang Rui
Link: http://lkml.kernel.org/r/20181212102537.25902-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo
27 Mar, 2018
1 commit
-
Fixes a segfault occurring when e.g. is pressed multiple times in the
ncurses tmon application. The segfault is caused by incrementing
cur_thermal_record in the main function without checking if it's value reached
NR_THERMAL_RECORD immediately. Since the boundary check only occurred in
update_thermal_data a race condition existed, which lead to an attempted read
beyond the last element of the trec array.The fix was implemented by moving the cur_thermal_record incrementation to the
update_thermal_data function using a temporary variable on which the boundary
condition is checked before updating cur_thread_record, so that the variable is
never incremented beyond the trec array's boundary.It seems the segfault does not occur on every machine: On a HP EliteBook G4 the
segfault happens, while it does not happen on a Thinkpad T540p.Signed-off-by: Frank Asseg
Signed-off-by: Jiri Kosina
18 Nov, 2017
1 commit
-
Pull thermal management updates from Zhang Rui:
- introduce brcmstb AVS TMON thermal driver (Brian Norris)
- add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao)
- major rework on HISI driver plus additional support of hisi3660
(Daniel Lezcano)- add nvmem-cells binding on imx6sx (Leonard Crestez)
- fix a NULL pointer dereference on ti thermal driver unloading (Tony
Lindgren)- improve tmon tool to make it easier to cross-compile tmon (Markus
Mayer)- add Coffee Lake and Cannon Lake support for intel processor and pch
thermal drivers (Srinivas Pandruvada)- other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen
Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann)* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits)
thermal: pch: Add Cannon Lake support
thermal: int340x: processor_thermal: Add Coffee Lake support
thermal: int340x: processor_thermal: Add Cannon Lake support
thermal: bxt: remove redundant variable trip
thermal: cpu_cooling: pr_err() strings should end with newlines
thermal: add brcmstb AVS TMON driver
Documentation: devicetree: add binding for Broadcom STB AVS TMON
thermal/drivers/hisi: Add support for hi3660 SoC
thermal/drivers/hisi: Prepare to add support for other hisi platforms
thermal/drivers/hisi: Add platform prefix to function name
thermal/drivers/hisi: Put platform code together
thermal/drivers/qcom-spmi: Use devm_iio_channel_get
thermal/drivers/generic-iio-adc: Switch tz request to devm version
thermal/drivers/step_wise: Fix temperature regulation misbehavior
thermal/drivers/hisi: Use round up step value
thermal/drivers/hisi: Move the clk setup in the corresponding functions
thermal/drivers/hisi: Remove mutex_lock in the code
thermal/drivers/hisi: Remove thermal data back pointer
thermal/drivers/hisi: Convert long to int
thermal/drivers/hisi: Rename and remove unused field
...
02 Nov, 2017
1 commit
-
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.By default all files without license information are under the default
license of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if
Reviewed-by: Philippe Ombredanne
Reviewed-by: Thomas Gleixner
Signed-off-by: Greg Kroah-Hartman
18 Oct, 2017
3 commits
-
To ease cross-compiling, make use of the $(PKG_CONFIG) variable rather
than hard-coding calls to pkg-config.Signed-off-by: Markus Mayer
Signed-off-by: Zhang Rui -
It can be helpful, especially when using a build system, to set the C
compiler externally.Signed-off-by: Markus Mayer
Signed-off-by: Zhang Rui -
Most, but not all, toolchains support the "-fstack-protector" flag. We
check if the compiler supports the flag before using it. This allows
tmon to be compiled for more environments.Signed-off-by: Markus Mayer
Signed-off-by: Zhang Rui
10 Oct, 2015
1 commit
-
The header might be in /usr/include/ncursesw, which is not
part of the standard include path. This fixes compile on openSUSE.Signed-off-by: Olaf Hering
Signed-off-by: Zhang Rui
09 May, 2015
1 commit
-
To install tmon we issue "make install" which produces bellow error.
root@odroidxu3:/usr/src/odroidxu3-4.y-testing/tools/thermal/tmon# make install
mkdir -p /usr/bin
install -m 755 -p "tmon" "/usr/bin/tmon"
mkdir -p /
install -m 644 -p "" "/"
install: cannot stat ‘’: No such file or directory
make: [install] Error 1 (ignored)Signed-off-by: Anand Moon
Acked-by: Jacob Pan
Signed-off-by: Zhang Rui
28 Feb, 2015
8 commits
-
gcc complains about the 'cols' variable being unused. This is
unavoidable, given the ncurses getmaxyx() macro-based API, which wants
to assign to a variable directly, even when we're not going to use it.Warning:
gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -c -o tui.o tui.c
tui.c: In function ‘show_dialogue’:
tui.c:288:12: warning: variable ‘cols’ set but not used [-Wunused-but-set-variable]
int rows, cols;
^So, add a hack to get rid of that warning.
Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui -
Some distros (e.g., Arch Linux) don't package the tinfo library
separately from ncurses, so don't unconditionally include it. Instead,
use pkg-config.The $(STATIC) ugliness is to handle the reported build case from commit
6b533269fb25 ("tools/thermal: tmon: fix compilation errors when building
statically"), where a developer wants to be able to build with:make LDFLAGS=-static
which requires an additional pkg-config flag.
Finally, support a lowest common denominator fallback (-lpanel
-lncurses) for build systems that don't have pkg-config entries for
ncurses.Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui -
We might want to prepare CFLAGS outside of this Makefile, so don't
overwrite its initial value.Then, support $(CROSS_COMPILE), so we can use a cross-compile toolchain.
Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui -
Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui -
The number of rows in the dialog vary according to the number of cooling
devices. However, some of the windowing computations were assuming a
fixed number of rows. This computation is OK when we have between 4 and
9 cooling devices (and they wrap to the next column), but with fewer
devices, we end up printing off the end of the window.This unifies the row computation into a single function and uses that
throughout the TUI code. This also accounts for increasing the number of
rows when there are more than 9 total cooling devices.Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui -
We can use the ncurses API to get the number of rows.
Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui -
Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui -
If we launch in daemon mode (--daemon), we don't have the ncurses UI,
but we might want to set the target temperature still. For example,
someone might stick the following in their boot script:tmon --control intel_powerclamp --target-temp 90 --log --daemon
This would turn on CPU idle injection when we're around 90 degrees
celsius, and would log temperature and throttling info to
/var/tmp/tmon.log.Signed-off-by: Brian Norris
Acked-by: Jacob Pan
Reviewed-by: Florian Fainelli
Signed-off-by: Zhang Rui
09 Dec, 2014
1 commit
-
The calloc() and xcalloc() functions takes @nmemb first and then @size. Fix all w/
pattern "calloc\s*(\s*sizeof".Signed-off-by: Arjun Sreedharan
Cc: "Yann E. MORIN"
Cc: Ingo Molnar
Cc: Paul Mackerras
Cc: Peter Zijlstra
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo
01 Jul, 2014
3 commits
-
Currently, the tmon umask value is set to 0, which means whatever the permission
mask in the shell are when starting tmon in daemon mode are what the permissions
of any created files will be. We should likely set something more explicit, so
lets go with the usual 022Signed-off-by: Neil Horman
Acked-by: Jacob Pan
Signed-off-by: Zhang Rui -
The tmon logging system blindly opens its log file on a static path, making it
very easy for someone to redirect that log information to inappropriate places
or overwrite other users data. Do some easy checking to make sure we're not
logging to a symlink or a file owned by another user.Signed-off-by: Neil Horman
Acked-by: Jacob Pan
Signed-off-by: Zhang Rui -
tmon fails to build statically with the following error:
$ make LDFLAGS=-static
gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -static tmon.o tui.o sysfs.o pid.o -o tmon -lm -lpanel -lncursesw -lpthread
tmon.o: In function `tmon_sig_handler':
tmon.c:(.text+0x21): undefined reference to `stdscr'
tmon.o: In function `tmon_cleanup':
tmon.c:(.text+0xb9): undefined reference to `stdscr'
tmon.c:(.text+0x11e): undefined reference to `stdscr'
tmon.c:(.text+0x123): undefined reference to `keypad'
tmon.c:(.text+0x12d): undefined reference to `nocbreak'
tmon.o: In function `main':
tmon.c:(.text+0x785): undefined reference to `stdscr'
tmon.c:(.text+0x78a): undefined reference to `nodelay'
tui.o: In function `setup_windows':
tui.c:(.text+0x131): undefined reference to `stdscr'
tui.c:(.text+0x176): undefined reference to `stdscr'
tui.c:(.text+0x19f): undefined reference to `stdscr'
tui.c:(.text+0x1cc): undefined reference to `stdscr'
tui.c:(.text+0x1ff): undefined reference to `stdscr'
tui.o:tui.c:(.text+0x229): more undefined references to `stdscr' follow
tui.o: In function `show_cooling_device':
[...]stdscr() and friends are in libtinfo (part of ncurses) so add it to
the libraries that are linked in when compiling tmon to fix it.Cc: Jacob Pan
Cc: Zhang Rui
Signed-off-by: Javi Merino
Acked-by: Jacob Pan
07 Nov, 2013
1 commit
-
Increasingly, Linux is running on thermally constrained devices. The simple
thermal relationship between processor and fan has become past for modern
computers.As hardware vendors cope with the thermal constraints on their products,
more sensors are added, new cooling capabilities are introduced. The
complexity of the thermal relationship can grow exponentially among cooling
devices, zones, sensors, and trip points. They can also change dynamically.To expose such relationship to the userspace, Linux generic thermal layer
introduced sysfs entry at /sys/class/thermal with a matrix of symbolic
links, trip point bindings, and device instances. To traverse such
matrix by hand is not a trivial task. Testing is also difficult in that
thermal conditions are often exception cases that hard to reach in
normal operations.TMON is conceived as a tool to help visualize, tune, and test the
complex thermal subsystem.Signed-off-by: Jacob Pan
Signed-off-by: Zhang Rui