26 Nov, 2009

4 commits

• 990c09d5f   Davinci: DM365: Enable DaVinci Key Scan support for DM365 EVM ... Browse Code »

  The general structures are defined at DM365 SoC file and the specific
  platform data structure for the EVM is defined at board file.

  Signed-off-by: Miguel Aguilar

  Miguel Aguilar

  2009-11-26 02:21:32 +0800  
• 42d399e41   DaVinci: remove unneeded #include's ... Browse Code »

  There have accumulated quite a lot of them after the code reorganizations...

  In several cases I had to replace #include which wasn't
  needed directly but happened to #include which was needed.

  Signed-off-by: Sergei Shtylyov
  Signed-off-by: Kevin Hilman

  Sergei Shtylyov

  2009-11-26 02:21:31 +0800  
• dc4c05a51   davinci: DM365: Update NAND driver platform data ... Browse Code »

  This patch updates the NAND driver platform data to use 4-bit ECC and the
  ECC_HW/ECC_HW_OOB_FIRST modes.

  Signed-off-by: Sneha Narnakaje
  Signed-off-by: Kevin Hilman

  Sneha Narnakaje

  2009-11-26 02:21:25 +0800  
• e9ab3214a   Davinci: DM365: Add platform device for McBSP ... Browse Code »

  1) Registers the platform device for McBSP on dm365.
  2) Add platform data to DM365 EVM board file.
  3) Set i2c address for audio codec at DM365 EVM board file.

  Signed-off-by: Miguel Aguilar
  Signed-off-by: Kevin Hilman

  Miguel Aguilar

  2009-11-26 02:21:17 +0800  

29 Sep, 2009

1 commit

• 9a0f6b464   ARM: includecheck fix: mach-davinci, board-dm365-evm.c ... Browse Code »

  fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-dm365-evm.c: mach/common.h is included more than once.

  Signed-off-by: Jaswinder Singh Rajput
  Acked-by: Kevin Hilman
  Signed-off-by: Russell King

  Jaswinder Singh Rajput

  2009-09-29 01:06:20 +0800  

26 Aug, 2009

5 commits

• ff255c6ca   davinci: dm365 evm cpld support: leds, card detect, other setup ... Browse Code »

  Add basic support for the CPLD on the DM365 EVM board:

  - Read SW5 to set up NAND and keypad vs (someday) OneNAND
  - Export MMC/SD card detect and writeprotect signals
  - LED support (same layout as on DM355 EVM)
  - Static config for video input:
  * external HD imager precludes MMC1, Ethernet, audio
  * else either tvp5146 (SD/default) or tvp7002 (HD)

  The video input could actually be switched around dynamically;
  change that if/when that's needed (and after those other video
  inputs have driver support).

  Signed-off-by: David Brownell
  Signed-off-by: Kevin Hilman

  David Brownell

  2009-08-26 15:56:59 +0800  
• 37b798da5   davinci: dm365: add NAND support to EVM board ... Browse Code »

  Signed-off-by: Sandeep Paulraj
  Signed-off-by: Kevin Hilman

  Sandeep Paulraj

  2009-08-26 15:56:59 +0800  
• a45c8ba30   davinci: MMC/SD Support for dm365 EVM ... Browse Code »

  Patch adds support for MMC/SD in the DM365 EVM.
  Pinmux for MMC/SD slot 1 on the DM365 EVM is also
  configured.

  Signed-off-by: Sandeep Paulraj
  Signed-off-by: Kevin Hilman

  Sandeep Paulraj

  2009-08-26 15:56:59 +0800  
• 8ed0a9d4e   davinci: dm365: EMAC support for SoC and dm365 EVM ... Browse Code »

  The patch adds Support for EMAC in the DM365 SOC and
  the DM365 EVM board.

  Signed-off-by: Sandeep Paulraj
  Signed-off-by: Kevin Hilman

  Sandeep Paulraj

  2009-08-26 15:56:58 +0800  
• 37dd00956   davinci: Adding DM365 EVM board support ... Browse Code »

  The patch adds support for Evaluation Module (EVM) board for the dm365
  SoC.

  Signed-off-by: Sandeep Paulraj
  Signed-off-by: Kevin Hilman

  Sandeep Paulraj

  2009-08-26 15:56:57 +0800