28 Oct, 2016
1 commit
-
Back in commit f56141e3e2d9 ("all arches, signal: move restart_block to
struct task_struct"), all architectures and core code were changed to
use task_struct::restart_block. However, when h8300 support was
subsequently restored in v4.2, it was not updated to account for this,
and maintains thread_info::restart_block, which is not kept in sync.This patch drops the redundant restart_block from thread_info, and moves
h8300 to the common one in task_struct, ensuring that syscall restarting
always works as expected.Fixes: f56141e3e2d9 ("all arches, signal: move restart_block to struct task_struct")
Link: http://lkml.kernel.org/r/1476714934-11635-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Mark Rutland
Cc: Andy Lutomirski
Cc: Yoshinori Sato
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: [4.2+]
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
08 Oct, 2016
1 commit
-
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf
Acked-by: Peter Zijlstra (Intel)
Tested-by: Peter Zijlstra (Intel)
Tested-by: Daniel Thompson [arm]
Tested-by: Petr Mladek
Cc: Aaron Tomlin
Cc: Peter Zijlstra (Intel)
Cc: "Rafael J. Wysocki"
Cc: Russell King
Cc: Thomas Gleixner
Cc: Ingo Molnar
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
04 Aug, 2016
1 commit
-
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer. Thus the pointer can point to const data.
However the attributes do not have to be a bitfield. Instead unsigned
long will do fine:1. This is just simpler. Both in terms of reading the code and setting
attributes. Instead of initializing local attributes on the stack
and passing pointer to it to dma_set_attr(), just set the bits.2. It brings safeness and checking for const correctness because the
attributes are passed by value.Semantic patches for this change (at least most of them):
virtual patch
virtual context@r@
identifier f, attrs;@@
f(...,
- struct dma_attrs *attrs
+ unsigned long attrs
, ...)
{
...
}@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)and
// Options: --all-includes
virtual patch
virtual context@r@
identifier f, attrs;
type t;@@
t f(..., struct dma_attrs *attrs);@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski
Acked-by: Vineet Gupta
Acked-by: Robin Murphy
Acked-by: Hans-Christian Noren Egtvedt
Acked-by: Mark Salter [c6x]
Acked-by: Jesper Nilsson [cris]
Acked-by: Daniel Vetter [drm]
Reviewed-by: Bart Van Assche
Acked-by: Joerg Roedel [iommu]
Acked-by: Fabien Dessenne [bdisp]
Reviewed-by: Marek Szyprowski [vb2-core]
Acked-by: David Vrabel [xen]
Acked-by: Konrad Rzeszutek Wilk [xen swiotlb]
Acked-by: Joerg Roedel [iommu]
Acked-by: Richard Kuo [hexagon]
Acked-by: Geert Uytterhoeven [m68k]
Acked-by: Gerald Schaefer [s390]
Acked-by: Bjorn Andersson
Acked-by: Hans-Christian Noren Egtvedt [avr32]
Acked-by: Vineet Gupta [arc]
Acked-by: Robin Murphy [arm64 and dma-iommu]
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
25 Mar, 2016
1 commit
-
earlyprintk is architecture specific option.
earlycon is generic and small footprint.Signed-off-by: Yoshinori Sato
20 Jan, 2016
4 commits
-
Signed-off-by: Yoshinori Sato
-
- fix stack limit. h8300's stack not aligned 4byte.
- pritty output form.Signed-off-by: Yoshinori Sato
-
Signed-off-by: Yoshinori Sato
-
Signed-off-by: Yoshinori Sato
15 Dec, 2015
1 commit
-
For the sake of consistency, let rename all ctrl_out/in calls to the write/read
calls so we have the same API consistent with the other architectures hence
open the door for the increasing of the test compilation coverage.The unsigned long coercive cast is removed because all variables are set to
the right type "void __iomem *".Signed-off-by: Daniel Lezcano
12 Nov, 2015
1 commit
-
Signed-off-by: Yoshinori Sato
08 Nov, 2015
1 commit
-
Signed-off-by: Yoshinori Sato
23 Jun, 2015
6 commits
-
h8300's Makefile, Kconfig and memory layout.
Signed-off-by: Yoshinori Sato
-
Signed-off-by: Yoshinori Sato
-
Signed-off-by: Yoshinori Sato
-
Signed-off-by: Yoshinori Sato
-
Signed-off-by: Yoshinori Sato
-
Signed-off-by: Yoshinori Sato
17 Sep, 2013
1 commit
-
H8/300 has been dead for several years, and the kernel for it
has not compiled for ages. Drop support for it.Cc: Yoshinori Sato
Acked-by: Greg Kroah-Hartman
Signed-off-by: Guenter Roeck
04 Jul, 2013
2 commits
-
Merge first patch-bomb from Andrew Morton:
- various misc bits
- I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been
distracted. There has been quite a bit of activity.
- About half the MM queue
- Some backlight bits
- Various lib/ updates
- checkpatch updates
- zillions more little rtc patches
- ptrace
- signals
- exec
- procfs
- rapidio
- nbd
- aoe
- pps
- memstick
- tools/testing/selftests updates* emailed patches from Andrew Morton : (445 commits)
tools/testing/selftests: don't assume the x bit is set on scripts
selftests: add .gitignore for kcmp
selftests: fix clean target in kcmp Makefile
selftests: add .gitignore for vm
selftests: add hugetlbfstest
self-test: fix make clean
selftests: exit 1 on failure
kernel/resource.c: remove the unneeded assignment in function __find_resource
aio: fix wrong comment in aio_complete()
drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode
drivers/memstick/host/r592.c: convert to module_pci_driver
drivers/memstick/host/jmb38x_ms: convert to module_pci_driver
pps-gpio: add device-tree binding and support
drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
drivers/parport/share.c: use kzalloc
Documentation/accounting/getdelays.c: avoid strncpy in accounting tool
aoe: update internal version number to v83
aoe: update copyright date
aoe: perform I/O completions in parallel
... -
Generate mandatory global variables __bss_start/__bss_stop in
file vmlinux.lds.Also remove one unused declaration of _text.
Signed-off-by: Jiang Liu
Cc: Yoshinori Sato
Cc: Jiang Liu
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
23 Jun, 2013
2 commits
-
The CALL() macro abstracts (a.o.) the underscore symbol prefix.
Signed-off-by: Geert Uytterhoeven
-
Commit e1b5bb6d1236d4ad2084c53aa83dde7cdf6f8eea ("consolidate cond_syscall
and SYSCALL_ALIAS declarations") broke the h8300 build because it removed
the duplicate SYMBOL_NAME() macro from arch/h8300/include/asm/linkage.h,
and all the h8300 asm files include instead of
:arch/h8300/kernel/entry.S: Assembler messages:
arch/h8300/kernel/entry.S:158: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/kernel/syscalls.S: Assembler messages:
arch/h8300/kernel/syscalls.S:6: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/abs.S: Assembler messages:
arch/h8300/lib/abs.S:12: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/memcpy.S: Assembler messages:
arch/h8300/lib/memcpy.S:13: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/memset.S: Assembler messages:
arch/h8300/lib/memset.S:13: Error: junk at end of line, first unrecognized character is `('
...Commit 126de6b20bfb82cc19012d5048f11f339ae5a021 ("linkage.h: fix build
breakage due to symbol prefix handling") broke it even more, by removing
SYMBOL_NAME() and replacing it by __SYMBOL_NAME().Commit f8ce1faf55955de62e0a12e330c6d9a526071f65 ("Merge tag
'modules-next-for-linus' of
git://git.kernel.org/pub/scm/linuxkernel/git/rusty/linux")
also removed __SYMBOL_NAME(), hidden in a merge conflict resolution.Hence, replace the use of SYMBOL_NAME() and SYMBOL_NAME_LABEL() in h8300
assembler sources by hardcoding the underscore symbol prefix, like other
architectures (blackfin/metag) do.This allows to kill SYMBOL_NAME_LABEL(). Now becomes empty,
and h8300 can be switched to asm-generic/linkage.h.Signed-off-by: Geert Uytterhoeven
05 May, 2013
1 commit
-
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro
02 May, 2013
1 commit
-
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
01 May, 2013
2 commits
-
show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms. This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.* Archs which didn't print debug info now do.
alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
um, xtensa* Already prints debug info. Replaced with show_regs_print_info().
The printed information is superset of what used to be there.arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86
* s390 is special in that it used to print arch-specific information
along with generic debug info. Heiko and Martin think that the
arch-specific extra isn't worth keeping s390 specfic implementation.
Converted to use the generic version.Note that now all archs print the debug info before actual register
dumps.An example BUG() dump follows.
kernel BUG at /work/os/work/kernel/workqueue.c:4841!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
Hardware name: empty empty/S3992, BIOS 080011 10/26/2007
task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
RIP: 0010:[] [] init_workqueues+0x4/0x6
RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246
RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
Call Trace:
[] do_one_initcall+0x122/0x170
[] kernel_init_freeable+0x9b/0x1c8
[] ? rest_init+0x140/0x140
[] kernel_init+0xe/0xf0
[] ret_from_fork+0x7c/0xb0
[] ? rest_init+0x140/0x140
...v2: Typo fix in x86-32.
v3: CPU number dropped from show_regs_print_info() as
dump_stack_print_info() has been updated to print it. s390
specific implementation dropped as requested by s390 maintainers.Signed-off-by: Tejun Heo
Acked-by: David S. Miller
Acked-by: Jesper Nilsson
Cc: Heiko Carstens
Cc: Martin Schwidefsky
Cc: Bjorn Helgaas
Cc: Fengguang Wu
Cc: Mike Frysinger
Cc: Vineet Gupta
Cc: Sam Ravnborg
Acked-by: Chris Metcalf [tile bits]
Acked-by: Richard Kuo [hexagon bits]
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds -
Both dump_stack() and show_stack() are currently implemented by each
architecture. show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack(). On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().There's no reason to require archs to implement two separate but mostly
identical functions. It leads to unnecessary subtle information.This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin. Blackfin's
dump_stack() does something wonky that I don't understand.Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information. This is used
in blackfin.This patch brings the following behavior changes.
* On some archs, an extra level in backtrace for show_stack() could be
printed. This is because the top frame was determined in
dump_stack() on those archs while generic dump_stack() can't do that
reliably. It can be compensated by inlining dump_stack() but not
sure whether that'd be necessary.* Most archs didn't use to print debug info on dump_stack(). They do
now.An example WARN dump follows.
WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
Hardware name: empty
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
Call Trace:
[] dump_stack+0x19/0x1b
[] warn_slowpath_common+0x7f/0xc0
[] warn_slowpath_null+0x1a/0x20
[] init_workqueues+0x35/0x505
...v2: CPU number added to the generic debug info as requested by s390
folks and dropped the s390 specific dump_stack(). This loses %ksp
from the debug message which the maintainers think isn't important
enough to keep the s390-specific dump_stack() implementation.dump_stack_print_info() is moved to kernel/printk.c from
lib/dump_stack.c. Because linkage is per objecct file,
dump_stack_print_info() living in the same lib file as generic
dump_stack() means that archs which implement custom dump_stack()
- at this point, only blackfin - can't use dump_stack_print_info()
as that will bring in the generic version of dump_stack() too. v1
The v1 patch broke build on blackfin due to this issue. The build
breakage was reported by Fengguang Wu.Signed-off-by: Tejun Heo
Acked-by: David S. Miller
Acked-by: Vineet Gupta
Acked-by: Jesper Nilsson
Acked-by: Vineet Gupta
Acked-by: Martin Schwidefsky [s390 bits]
Cc: Heiko Carstens
Cc: Mike Frysinger
Cc: Fengguang Wu
Cc: Bjorn Helgaas
Cc: Sam Ravnborg
Acked-by: Richard Kuo [hexagon bits]
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
30 Apr, 2013
1 commit
-
Don't use create_proc_read_entry() as that is deprecated, but rather use
proc_create_data() and seq_file instead.Signed-off-by: David Howells
cc: Yoshinori Sato
Signed-off-by: Al Viro
10 Apr, 2013
1 commit
-
Signed-off-by: Al Viro
08 Apr, 2013
1 commit
-
Use the core idle poll function instead of the private one
Signed-off-by: Thomas Gleixner
Cc: Linus Torvalds
Cc: Rusty Russell
Cc: Paul McKenney
Cc: Peter Zijlstra
Reviewed-by: Cc: Srivatsa S. Bhat
Cc: Magnus Damm
Cc: Yoshinori Sato
Link: http://lkml.kernel.org/r/20130321215234.277153345@linutronix.de
Signed-off-by: Thomas Gleixner
04 Feb, 2013
4 commits
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
29 Nov, 2012
2 commits
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
15 Oct, 2012
3 commits
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
-
Signed-off-by: Al Viro
13 Oct, 2012
1 commit
-
getname() is intended to copy pathname strings from userspace into a
kernel buffer. The result is just a string in kernel space. It would
however be quite helpful to be able to attach some ancillary info to
the string.For instance, we could attach some audit-related info to reduce the
amount of audit-related processing needed. When auditing is enabled,
we could also call getname() on the string more than once and not
need to recopy it from userspace.This patchset converts the getname()/putname() interfaces to return
a struct instead of a string. For now, the struct just tracks the
string in kernel space and the original userland pointer for it.Later, we'll add other information to the struct as it becomes
convenient.Signed-off-by: Jeff Layton
Signed-off-by: Al Viro
12 Oct, 2012
1 commit
-
Pull pile 2 of execve and kernel_thread unification work from Al Viro:
"Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for
several more architectures plus assorted signal fixes and cleanups.There'll be more (in particular, real fixes for the alpha
do_notify_resume() irq mess)..."* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits)
alpha: don't open-code trace_report_syscall_{enter,exit}
Uninclude linux/freezer.h
m32r: trim masks
avr32: trim masks
tile: don't bother with SIGTRAP in setup_frame
microblaze: don't bother with SIGTRAP in setup_rt_frame()
mn10300: don't bother with SIGTRAP in setup_frame()
frv: no need to raise SIGTRAP in setup_frame()
x86: get rid of duplicate code in case of CONFIG_VM86
unicore32: remove pointless test
h8300: trim _TIF_WORK_MASK
parisc: decide whether to go to slow path (tracesys) based on thread flags
parisc: don't bother looping in do_signal()
parisc: fix double restarts
bury the rest of TIF_IRET
sanitize tsk_is_polling()
bury _TIF_RESTORE_SIGMASK
unicore32: unobfuscate _TIF_WORK_MASK
mips: NOTIFY_RESUME is not needed in TIF masks
mips: merge the identical "return from syscall" per-ABI code
...Conflicts:
arch/arm/include/asm/thread_info.h