Blame view
doc/README.m68k
5.64 KB
bf9e3b38f
|
1 2 |
U-Boot for Motorola M68K |
9acb626fc
|
3 4 |
==================================================================== History |
53677ef18
|
5 |
August 08,2005; Jens Scharsig <esw@bus-elektronik.de> |
9acb626fc
|
6 |
MCF5282 implementation without preloader |
53677ef18
|
7 |
January 12, 2004; <josef.baumgartner@telex.de> |
bf9e3b38f
|
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 |
==================================================================== This file contains status information for the port of U-Boot to the Motorola M68K series of CPUs. 1. OVERVIEW ----------- Bernhard Kuhn ported U-Boot 0.4.0 to the Motorola Coldfire architecture. The patches of Bernhard support the MCF5272 and MCF5282. A great disadvantage of these patches was that they needed a pre-bootloader to start u-boot. Because of this, a new port was created which no longer needs a first stage booter. Although this port is intended to cover all M68k processors, only the parts for the Motorola Coldfire MCF5272 and MCF5282 are implemented at the moment. Additional CPUs and boards will be hopefully added soon! 2. SUPPORTED CPUs ----------------- 2.1 Motorola Coldfire MCF5272 ----------------------------- |
a41455348
|
32 |
CPU specific code is located in: arch/m68k/cpu/mcf52x2 |
bf9e3b38f
|
33 34 35 36 |
2.1 Motorola Coldfire MCF5282 ----------------------------- |
a41455348
|
37 |
CPU specific code is located in: arch/m68k/cpu/mcf52x2 |
bf9e3b38f
|
38 |
|
9acb626fc
|
39 40 |
The MCF5282 Port no longer needs a preloader and can place in external or internal FLASH. |
bf9e3b38f
|
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 |
3. SUPPORTED BOARDs ------------------- 3.1 Motorola M5272C3 EVB ------------------------ Board specific code is located in: board/m5272c3 To configure the board, type: make M5272C3_config U-Boot Memory Map: ------------------ 0xffe00000 - 0xffe3ffff u-boot 0xffe04000 - 0xffe05fff environment (embedded in u-boot!) 0xffe40000 - 0xffffffff free for linux/applications 3.2 Motorola M5282 EVB ------------------------ Board specific code is located in: board/m5282evb To configure the board, type: make M5272C3_config |
9acb626fc
|
64 65 66 67 68 69 70 71 |
At the moment the code isn't fully implemented and still needs a pre-loader! The preloader must initialize the processor and then start u-boot. The board must be configured for a pre-loader (see 4.1) For the preloader, please see http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html U-boot is configured to run at 0x20000 at default. This can be configured by |
14d0a02a1
|
72 |
change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in |
9acb626fc
|
73 74 75 76 77 78 79 80 |
include/configs/M5282EVB.h. 3.2 BuS EB+MCF-EV123 --------------------- Board specific code is located in: board/bus/EB+MCF-EV123 To configure the board, type: |
53677ef18
|
81 82 |
make EB+MCF-EV123_config for external FLASH make EB+MCF-EV123_internal_config for internal FLASH |
9acb626fc
|
83 |
|
bf9e3b38f
|
84 85 86 87 88 89 90 91 92 93 |
4. CONFIGURATION OPTIONS/SETTINGS ---------------------------------- 4.1 Configuration to use a pre-loader ------------------------------------- If u-boot should be loaded to RAM and started by a pre-loader CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the initial vector table and basic processor initialization will not be compiled in. The start address of u-boot must be adjusted in |
6d0f6bcf3
|
94 |
the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile |
14d0a02a1
|
95 |
(CONFIG_SYS_TEXT_BASE) to the load address. |
bf9e3b38f
|
96 |
|
bf9e3b38f
|
97 98 99 100 101 102 103 104 |
4.1 MCF5272 specific Options/Settings ------------------------------------- CONFIG_MCF52x2 -- defined for all MCF52x2 CPUs CONFIG_M5272 -- defined for all Motorola MCF5272 CPUs CONFIG_MONITOR_IS_IN_RAM -- defined if u-boot is loaded by a pre-loader |
6d0f6bcf3
|
105 106 |
CONFIG_SYS_MBAR -- defines the base address of the MCF5272 configuration registers CONFIG_SYS_INIT_RAM_ADDR |
bf9e3b38f
|
107 |
-- defines the base address of the MCF5272 internal SRAM |
6d0f6bcf3
|
108 |
CONFIG_SYS_ENET_BD_BASE |
162630879
|
109 |
-- defines the base address of the FEC buffer descriptors |
bf9e3b38f
|
110 |
|
6d0f6bcf3
|
111 112 113 114 |
CONFIG_SYS_SCR -- defines the contents of the System Configuration Register CONFIG_SYS_SPR -- defines the contents of the System Protection Register CONFIG_SYS_BRx_PRELIM -- defines the contents of the Chip Select Base Registers CONFIG_SYS_ORx_PRELIM -- defines the contents of the Chip Select Option Registers |
bf9e3b38f
|
115 |
|
6d0f6bcf3
|
116 117 118 |
CONFIG_SYS_PxDDR -- defines the contents of the Data Direction Registers CONFIG_SYS_PxDAT -- defines the contents of the Data Registers CONFIG_SYS_PXCNT -- defines the contents of the Port Configuration Registers |
bf9e3b38f
|
119 120 121 122 123 124 125 126 127 128 |
4.2 MCF5282 specific Options/Settings ------------------------------------- CONFIG_MCF52x2 -- defined for all MCF52x2 CPUs CONFIG_M5282 -- defined for all Motorola MCF5282 CPUs CONFIG_MONITOR_IS_IN_RAM -- defined if u-boot is loaded by a pre-loader |
6d0f6bcf3
|
129 130 |
CONFIG_SYS_MBAR -- defines the base address of the MCF5282 internal register space CONFIG_SYS_INIT_RAM_ADDR |
bf9e3b38f
|
131 |
-- defines the base address of the MCF5282 internal SRAM |
6d0f6bcf3
|
132 |
CONFIG_SYS_INT_FLASH_BASE |
bf9e3b38f
|
133 |
-- defines the base address of the MCF5282 internal Flash memory |
6d0f6bcf3
|
134 |
CONFIG_SYS_ENET_BD_BASE |
162630879
|
135 |
-- defines the base address of the FEC buffer descriptors |
bf9e3b38f
|
136 |
|
6d0f6bcf3
|
137 |
CONFIG_SYS_MFD |
9acb626fc
|
138 139 |
-- defines the PLL Multiplication Factor Devider (see table 9-4 of MCF user manual) |
6d0f6bcf3
|
140 |
CONFIG_SYS_RFD -- defines the PLL Reduce Frecuency Devider |
9acb626fc
|
141 |
(see table 9-4 of MCF user manual) |
6d0f6bcf3
|
142 143 144 145 |
CONFIG_SYS_CSx_BASE -- defines the base address of chip select x CONFIG_SYS_CSx_SIZE -- defines the memory size (address range) of chip select x CONFIG_SYS_CSx_WIDTH -- defines the bus with of chip select x CONFIG_SYS_CSx_RO -- if set to 0 chip select x is read/wirte |
9acb626fc
|
146 |
else chipselct is read only |
6d0f6bcf3
|
147 |
CONFIG_SYS_CSx_WS -- defines the number of wait states of chip select x |
9acb626fc
|
148 |
|
6d0f6bcf3
|
149 150 151 |
CONFIG_SYS_PxDDR -- defines the contents of the Data Direction Registers CONFIG_SYS_PxDAT -- defines the contents of the Data Registers CONFIG_SYS_PXCNT -- defines the contents of the Port Configuration Registers |
9acb626fc
|
152 |
|
6d0f6bcf3
|
153 |
CONFIG_SYS_PxPAR -- defines the function of ports |
9acb626fc
|
154 |
|
bf9e3b38f
|
155 156 157 158 159 |
5. COMPILER ----------- To create U-Boot the gcc-2.95.3 compiler set (m68k-elf-20030314) from uClinux.org was used. You can download it from: http://www.uclinux.org/pub/uClinux/m68k-elf-tools/ |