/*
   * Copyright 2011, Marvell Semiconductor Inc.
   * Lei Wen <leiwen@marvell.com>
   *

   * SPDX-License-Identifier:	GPL-2.0+

   *
   * Back ported to the 8xx platform (from the 8260 platform) by
   * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
   */
  #ifndef __SDHCI_HW_H
  #define __SDHCI_HW_H
  
  #include <asm/io.h>

  #include <mmc.h>

  #include <asm/gpio.h>

  /*
   * Controller registers
   */
  
  #define SDHCI_DMA_ADDRESS	0x00
  
  #define SDHCI_BLOCK_SIZE	0x04
  #define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
  
  #define SDHCI_BLOCK_COUNT	0x06
  
  #define SDHCI_ARGUMENT		0x08
  
  #define SDHCI_TRANSFER_MODE	0x0C

  #define  SDHCI_TRNS_DMA		BIT(0)
  #define  SDHCI_TRNS_BLK_CNT_EN	BIT(1)
  #define  SDHCI_TRNS_ACMD12	BIT(2)
  #define  SDHCI_TRNS_READ	BIT(4)
  #define  SDHCI_TRNS_MULTI	BIT(5)

  
  #define SDHCI_COMMAND		0x0E
  #define  SDHCI_CMD_RESP_MASK	0x03
  #define  SDHCI_CMD_CRC		0x08
  #define  SDHCI_CMD_INDEX	0x10
  #define  SDHCI_CMD_DATA		0x20
  #define  SDHCI_CMD_ABORTCMD	0xC0
  
  #define  SDHCI_CMD_RESP_NONE	0x00
  #define  SDHCI_CMD_RESP_LONG	0x01
  #define  SDHCI_CMD_RESP_SHORT	0x02
  #define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
  
  #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
  #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
  
  #define SDHCI_RESPONSE		0x10
  
  #define SDHCI_BUFFER		0x20
  
  #define SDHCI_PRESENT_STATE	0x24

  #define  SDHCI_CMD_INHIBIT	BIT(0)
  #define  SDHCI_DATA_INHIBIT	BIT(1)
  #define  SDHCI_DOING_WRITE	BIT(8)
  #define  SDHCI_DOING_READ	BIT(9)
  #define  SDHCI_SPACE_AVAILABLE	BIT(10)
  #define  SDHCI_DATA_AVAILABLE	BIT(11)
  #define  SDHCI_CARD_PRESENT	BIT(16)
  #define  SDHCI_CARD_STATE_STABLE	BIT(17)
  #define  SDHCI_CARD_DETECT_PIN_LEVEL	BIT(18)
  #define  SDHCI_WRITE_PROTECT	BIT(19)

  
  #define SDHCI_HOST_CONTROL	0x28

  #define  SDHCI_CTRL_LED		BIT(0)
  #define  SDHCI_CTRL_4BITBUS	BIT(1)
  #define  SDHCI_CTRL_HISPD	BIT(2)

  #define  SDHCI_CTRL_DMA_MASK	0x18
  #define   SDHCI_CTRL_SDMA	0x00
  #define   SDHCI_CTRL_ADMA1	0x08
  #define   SDHCI_CTRL_ADMA32	0x10
  #define   SDHCI_CTRL_ADMA64	0x18

  #define  SDHCI_CTRL_8BITBUS	BIT(5)
  #define  SDHCI_CTRL_CD_TEST_INS	BIT(6)
  #define  SDHCI_CTRL_CD_TEST	BIT(7)

  
  #define SDHCI_POWER_CONTROL	0x29
  #define  SDHCI_POWER_ON		0x01
  #define  SDHCI_POWER_180	0x0A
  #define  SDHCI_POWER_300	0x0C
  #define  SDHCI_POWER_330	0x0E
  
  #define SDHCI_BLOCK_GAP_CONTROL	0x2A
  
  #define SDHCI_WAKE_UP_CONTROL	0x2B

  #define  SDHCI_WAKE_ON_INT	BIT(0)
  #define  SDHCI_WAKE_ON_INSERT	BIT(1)
  #define  SDHCI_WAKE_ON_REMOVE	BIT(2)

  
  #define SDHCI_CLOCK_CONTROL	0x2C
  #define  SDHCI_DIVIDER_SHIFT	8
  #define  SDHCI_DIVIDER_HI_SHIFT	6
  #define  SDHCI_DIV_MASK	0xFF
  #define  SDHCI_DIV_MASK_LEN	8
  #define  SDHCI_DIV_HI_MASK	0x300

  #define  SDHCI_PROG_CLOCK_MODE  BIT(5)
  #define  SDHCI_CLOCK_CARD_EN	BIT(2)
  #define  SDHCI_CLOCK_INT_STABLE	BIT(1)
  #define  SDHCI_CLOCK_INT_EN	BIT(0)

  
  #define SDHCI_TIMEOUT_CONTROL	0x2E
  
  #define SDHCI_SOFTWARE_RESET	0x2F
  #define  SDHCI_RESET_ALL	0x01
  #define  SDHCI_RESET_CMD	0x02
  #define  SDHCI_RESET_DATA	0x04
  
  #define SDHCI_INT_STATUS	0x30
  #define SDHCI_INT_ENABLE	0x34
  #define SDHCI_SIGNAL_ENABLE	0x38

  #define  SDHCI_INT_RESPONSE	BIT(0)
  #define  SDHCI_INT_DATA_END	BIT(1)
  #define  SDHCI_INT_DMA_END	BIT(3)
  #define  SDHCI_INT_SPACE_AVAIL	BIT(4)
  #define  SDHCI_INT_DATA_AVAIL	BIT(5)
  #define  SDHCI_INT_CARD_INSERT	BIT(6)
  #define  SDHCI_INT_CARD_REMOVE	BIT(7)
  #define  SDHCI_INT_CARD_INT	BIT(8)
  #define  SDHCI_INT_ERROR	BIT(15)
  #define  SDHCI_INT_TIMEOUT	BIT(16)
  #define  SDHCI_INT_CRC		BIT(17)
  #define  SDHCI_INT_END_BIT	BIT(18)
  #define  SDHCI_INT_INDEX	BIT(19)
  #define  SDHCI_INT_DATA_TIMEOUT	BIT(20)
  #define  SDHCI_INT_DATA_CRC	BIT(21)
  #define  SDHCI_INT_DATA_END_BIT	BIT(22)
  #define  SDHCI_INT_BUS_POWER	BIT(23)
  #define  SDHCI_INT_ACMD12ERR	BIT(24)
  #define  SDHCI_INT_ADMA_ERROR	BIT(25)

  
  #define  SDHCI_INT_NORMAL_MASK	0x00007FFF
  #define  SDHCI_INT_ERROR_MASK	0xFFFF8000
  
  #define  SDHCI_INT_CMD_MASK	(SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
  		SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
  #define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
  		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
  		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
  		SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
  #define SDHCI_INT_ALL_MASK	((unsigned int)-1)
  
  #define SDHCI_ACMD12_ERR	0x3C
  
  /* 3E-3F reserved */
  
  #define SDHCI_CAPABILITIES	0x40
  #define  SDHCI_TIMEOUT_CLK_MASK	0x0000003F
  #define  SDHCI_TIMEOUT_CLK_SHIFT 0
  #define  SDHCI_TIMEOUT_CLK_UNIT	0x00000080
  #define  SDHCI_CLOCK_BASE_MASK	0x00003F00
  #define  SDHCI_CLOCK_V3_BASE_MASK	0x0000FF00
  #define  SDHCI_CLOCK_BASE_SHIFT	8
  #define  SDHCI_MAX_BLOCK_MASK	0x00030000
  #define  SDHCI_MAX_BLOCK_SHIFT  16

  #define  SDHCI_CAN_DO_8BIT	BIT(18)
  #define  SDHCI_CAN_DO_ADMA2	BIT(19)
  #define  SDHCI_CAN_DO_ADMA1	BIT(20)
  #define  SDHCI_CAN_DO_HISPD	BIT(21)
  #define  SDHCI_CAN_DO_SDMA	BIT(22)
  #define  SDHCI_CAN_VDD_330	BIT(24)
  #define  SDHCI_CAN_VDD_300	BIT(25)
  #define  SDHCI_CAN_VDD_180	BIT(26)
  #define  SDHCI_CAN_64BIT	BIT(28)

  
  #define SDHCI_CAPABILITIES_1	0x44

  #define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
  #define  SDHCI_CLOCK_MUL_SHIFT	16

  
  #define SDHCI_MAX_CURRENT	0x48
  
  /* 4C-4F reserved for more max current */
  
  #define SDHCI_SET_ACMD12_ERROR	0x50
  #define SDHCI_SET_INT_ERROR	0x52
  
  #define SDHCI_ADMA_ERROR	0x54
  
  /* 55-57 reserved */
  
  #define SDHCI_ADMA_ADDRESS	0x58
  
  /* 60-FB reserved */
  
  #define SDHCI_SLOT_INT_STATUS	0xFC
  
  #define SDHCI_HOST_VERSION	0xFE
  #define  SDHCI_VENDOR_VER_MASK	0xFF00
  #define  SDHCI_VENDOR_VER_SHIFT	8
  #define  SDHCI_SPEC_VER_MASK	0x00FF
  #define  SDHCI_SPEC_VER_SHIFT	0
  #define   SDHCI_SPEC_100	0
  #define   SDHCI_SPEC_200	1
  #define   SDHCI_SPEC_300	2

  #define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)

  /*
   * End of controller registers.
   */
  
  #define SDHCI_MAX_DIV_SPEC_200	256
  #define SDHCI_MAX_DIV_SPEC_300	2046
  
  /*
   * quirks
   */
  #define SDHCI_QUIRK_32BIT_DMA_ADDR	(1 << 0)

  #define SDHCI_QUIRK_REG32_RW		(1 << 1)

  #define SDHCI_QUIRK_BROKEN_R1B		(1 << 2)

  #define SDHCI_QUIRK_NO_HISPD_BIT	(1 << 3)
  #define SDHCI_QUIRK_BROKEN_VOLTAGE	(1 << 4)

  #define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)

  #define SDHCI_QUIRK_USE_WIDE8		(1 << 8)

  /* to make gcc happy */
  struct sdhci_host;

  /*
   * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
   */
  #define SDHCI_DEFAULT_BOUNDARY_SIZE	(512 * 1024)
  #define SDHCI_DEFAULT_BOUNDARY_ARG	(7)
  struct sdhci_ops {
  #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS

  	u32	(*read_l)(struct sdhci_host *host, int reg);
  	u16	(*read_w)(struct sdhci_host *host, int reg);
  	u8	(*read_b)(struct sdhci_host *host, int reg);
  	void	(*write_l)(struct sdhci_host *host, u32 val, int reg);
  	void	(*write_w)(struct sdhci_host *host, u16 val, int reg);
  	void	(*write_b)(struct sdhci_host *host, u8 val, int reg);

  #endif

  	int	(*get_cd)(struct sdhci_host *host);
  	void	(*set_control_reg)(struct sdhci_host *host);

  	void	(*set_ios_post)(struct sdhci_host *host);

  	void	(*set_clock)(struct sdhci_host *host, u32 div);

  };
  
  struct sdhci_host {

  	const char *name;

  	void *ioaddr;
  	unsigned int quirks;

  	unsigned int host_caps;

  	unsigned int version;

  	unsigned int max_clk;   /* Maximum Base Clock frequency */

  	unsigned int clk_mul;   /* Clock Multiplier value */

  	unsigned int clock;

  	struct mmc *mmc;

  	const struct sdhci_ops *ops;

  	int index;

  	int bus_width;

  	struct gpio_desc pwr_gpio;	/* Power GPIO */
  	struct gpio_desc cd_gpio;		/* Card Detect GPIO */

  	uint	voltages;

  
  	struct mmc_config cfg;

  };
  
  #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
  
  static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
  {
  	if (unlikely(host->ops->write_l))
  		host->ops->write_l(host, val, reg);
  	else
  		writel(val, host->ioaddr + reg);
  }
  
  static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
  {
  	if (unlikely(host->ops->write_w))
  		host->ops->write_w(host, val, reg);
  	else
  		writew(val, host->ioaddr + reg);
  }
  
  static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
  {
  	if (unlikely(host->ops->write_b))
  		host->ops->write_b(host, val, reg);
  	else
  		writeb(val, host->ioaddr + reg);
  }
  
  static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
  {
  	if (unlikely(host->ops->read_l))
  		return host->ops->read_l(host, reg);
  	else
  		return readl(host->ioaddr + reg);
  }
  
  static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
  {
  	if (unlikely(host->ops->read_w))
  		return host->ops->read_w(host, reg);
  	else
  		return readw(host->ioaddr + reg);
  }
  
  static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
  {
  	if (unlikely(host->ops->read_b))
  		return host->ops->read_b(host, reg);
  	else
  		return readb(host->ioaddr + reg);
  }
  
  #else
  
  static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
  {
  	writel(val, host->ioaddr + reg);
  }
  
  static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
  {
  	writew(val, host->ioaddr + reg);
  }
  
  static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
  {
  	writeb(val, host->ioaddr + reg);
  }
  static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
  {
  	return readl(host->ioaddr + reg);
  }
  
  static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
  {
  	return readw(host->ioaddr + reg);
  }
  
  static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
  {
  	return readb(host->ioaddr + reg);
  }
  #endif

  #ifdef CONFIG_BLK
  /**
   * sdhci_setup_cfg() - Set up the configuration for DWMMC
   *
   * This is used to set up an SDHCI device when you are using CONFIG_BLK.
   *
   * This should be called from your MMC driver's probe() method once you have
   * the information required.
   *
   * Generally your driver will have a platform data structure which holds both
   * the configuration (struct mmc_config) and the MMC device info (struct mmc).
   * For example:
   *
   * struct msm_sdhc_plat {
   *	struct mmc_config cfg;
   *	struct mmc mmc;
   * };
   *
   * ...
   *
   * Inside U_BOOT_DRIVER():
   *	.platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat),
   *
   * To access platform data:
   *	struct msm_sdhc_plat *plat = dev_get_platdata(dev);
   *
   * See msm_sdhci.c for an example.
   *
   * @cfg:	Configuration structure to fill in (generally &plat->mmc)

   * @host:	SDHCI host structure

   * @f_max:	Maximum supported clock frequency in HZ (0 for default)
   * @f_min:	Minimum supported clock frequency in HZ (0 for default)

   */

  int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,

  		    u32 f_max, u32 f_min);

  
  /**
   * sdhci_bind() - Set up a new MMC block device
   *
   * This is used to set up an SDHCI block device when you are using CONFIG_BLK.
   * It should be called from your driver's bind() method.
   *
   * See msm_sdhci.c for an example.
   *
   * @dev:	Device to set up
   * @mmc:	Pointer to mmc structure (normally &plat->mmc)
   * @cfg:	Empty configuration structure (generally &plat->cfg). This is
   *		normally all zeroes at this point. The only purpose of passing
   *		this in is to set mmc->cfg to it.
   * @return 0 if OK, -ve if the block device could not be created
   */
  int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
  #else
  
  /**
   * add_sdhci() - Add a new SDHCI interface
   *
   * This is used when you are not using CONFIG_BLK. Convert your driver over!
   *
   * @host:	SDHCI host structure

   * @f_max:	Maximum supported clock frequency in HZ (0 for default)
   * @f_min:	Minimum supported clock frequency in HZ (0 for default)

   * @return 0 if OK, -ve on error
   */

  int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min);

  #endif /* !CONFIG_BLK */

  #ifdef CONFIG_DM_MMC

  /* Export the operations to drivers */
  int sdhci_probe(struct udevice *dev);
  extern const struct dm_mmc_ops sdhci_ops;
  #else
  #endif

  #endif /* __SDHCI_HW_H */