Watchdog driver general info
  
  CONFIG_HW_WATCHDOG
  	This enables hw_watchdog_reset to be called during various loops,
  	including waiting for a character on a serial port. But it
  	does not also call hw_watchdog_init. Boards which want this
  	enabled must call this function in their board file. This split
  	is useful because some rom's enable the watchdog when downloading
  	new code, so it must be serviced, but the board would rather it
  	was off. And, it cannot always be turned off once on.
  
  CONFIG_WATCHDOG_TIMEOUT_MSECS
  	Can be used to change the timeout for i.mx31/35/5x/6x.
  	If not given, will default to maximum timeout. This would
  	be 128000 msec for i.mx31/35/5x/6x.
  
  CONFIG_AT91SAM9_WATCHDOG
  	Available for AT91SAM9 to service the watchdog.
  
  CONFIG_FTWDT010_WATCHDOG
  	Available for FTWDT010 to service the watchdog.
  
  CONFIG_FTWDT010_HW_TIMEOUT
  	Can be used to change the timeout for FTWDT010.
  
  CONFIG_IMX_WATCHDOG
  	Available for i.mx31/35/5x/6x to service the watchdog. This is not
  	automatically set because some boards (vision2) still need to define
  	their own hw_watchdog_reset routine.

  
  CONFIG_XILINX_TB_WATCHDOG
  	Available for Xilinx Axi platforms to service timebase watchdog timer.

  
  CONFIG_BFIN_WATCHDOG
  	Available for bf5xx and bf6xx to service the watchdog.