zynq-zturn-myir.dts
2.78 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
/*
* Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
* Copyright (C) 2017 Alexander Graf <agraf@suse.de>
*
* Based on zynq-zed.dts which is:
* Copyright (C) 2011 - 2014 Xilinx
* Copyright (C) 2012 National Instruments Corp.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
model = "Zynq Z-Turn MYIR Board";
compatible = "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
serial1 = &uart0;
spi0 = &qspi;
mmc0 = &sdhci0;
};
memory {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
led_r {
label = "led_r";
gpios = <&gpio0 0x72 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led_g {
label = "led_g";
gpios = <&gpio0 0x73 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led_b {
label = "led_b";
gpios = <&gpio0 0x74 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
usr_led1 {
label = "usr_led1";
gpios = <&gpio0 0x0 0x1>;
default-state = "off";
linux,default-trigger = "none";
};
usr_led2 {
label = "usr_led2";
gpios = <&gpio0 0x9 0x1>;
default-state = "off";
linux,default-trigger = "none";
};
};
gpio-beep {
compatible = "gpio-beeper";
label = "pl-beep";
gpios = <&gpio0 0x75 0x0>;
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <0x1>;
#size-cells = <0x0>;
autorepeat;
K1 {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
gpio-key,wakeup;
autorepeat;
};
};
};
&clkc {
ps-clk-frequency = <33333333>;
fclk-enable = <0xf>;
};
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <ðernet_phy>;
ethernet_phy: ethernet-phy@0 {
reg = <0x0>;
};
};
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&can0 {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
stlm75@49 {
status = "okay";
compatible = "lm75";
reg = <0x49>;
};
adxl345@53 {
compatible = "adi,adxl34x", "adxl34x";
reg = <0x53>;
interrupt-parent = <&intc>;
interrupts = <0x0 0x1e 0x4>;
};
};