Commit 10bb5cf4d0a4d079c1463df6d4cb3f51f1b5ad18
Committed by
Ye Li
Ye Li
1 parent
f800cd6890
Exists in
smarc_8mm-imx_v2018.03_4.14.98_2.0.0_ga
and in
5 other branches
MLK-19722-1 doc: Move device tree bindings documentation to doc/device-tree-bindings
Currently the U-Boot project contains 2 documentation directories: - doc/ - Documentation/ The Documentation directory only contains device tree bindings related content, so move the 2 files to doc/device-tree-bindings/. This commit is based in a previous submission in U-Boot upstream: http://git.denx.de/?p=u-boot.git;a=commit;h=ad7061ed742e1312289644268859a0f4b512aaee Signed-off-by: Breno Lima <breno.lima@nxp.com>
Showing 4 changed files with 38 additions and 38 deletions Side-by-side Diff
Documentation/devicetree/bindings/phy/no-op.txt
| 1 | -NOP PHY driver | |
| 2 | - | |
| 3 | -This driver is used to stub PHY operations in a driver (USB, SATA). | |
| 4 | -This is useful when the 'client' driver (USB, SATA, ...) uses the PHY framework | |
| 5 | -and there is no actual PHY harwdare to drive. | |
| 6 | - | |
| 7 | -Required properties: | |
| 8 | -- compatible : must contain "nop-phy" | |
| 9 | -- #phy-cells : must contain <0> | |
| 10 | - | |
| 11 | -Example: | |
| 12 | - | |
| 13 | -nop_phy { | |
| 14 | - compatible = "nop-phy"; | |
| 15 | - #phy-cells = <0>; | |
| 16 | -}; |
Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
| 1 | -Broadcom STB wake-up Timer | |
| 2 | - | |
| 3 | -The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the | |
| 4 | -ability to wake up the system from low-power suspend/standby modes. | |
| 5 | - | |
| 6 | -Required properties: | |
| 7 | -- compatible : should contain "brcm,brcmstb-waketimer" | |
| 8 | -- reg : the register start and length for the WKTMR block | |
| 9 | -- interrupts : The TIMER interrupt | |
| 10 | -- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2 | |
| 11 | - interrupt controller node | |
| 12 | -- clocks : The phandle to the UPG fixed clock (27Mhz domain) | |
| 13 | - | |
| 14 | -Example: | |
| 15 | - | |
| 16 | -waketimer@f0411580 { | |
| 17 | - compatible = "brcm,brcmstb-waketimer"; | |
| 18 | - reg = <0xf0411580 0x14>; | |
| 19 | - interrupts = <0x3>; | |
| 20 | - interrupt-parent = <&aon_pm_l2_intc>; | |
| 21 | - clocks = <&upg_fixed>; | |
| 22 | -}; |
doc/device-tree-bindings/phy/no-op.txt
| 1 | +NOP PHY driver | |
| 2 | + | |
| 3 | +This driver is used to stub PHY operations in a driver (USB, SATA). | |
| 4 | +This is useful when the 'client' driver (USB, SATA, ...) uses the PHY framework | |
| 5 | +and there is no actual PHY harwdare to drive. | |
| 6 | + | |
| 7 | +Required properties: | |
| 8 | +- compatible : must contain "nop-phy" | |
| 9 | +- #phy-cells : must contain <0> | |
| 10 | + | |
| 11 | +Example: | |
| 12 | + | |
| 13 | +nop_phy { | |
| 14 | + compatible = "nop-phy"; | |
| 15 | + #phy-cells = <0>; | |
| 16 | +}; |
doc/device-tree-bindings/rtc/brcm,brcmstb-waketimer.txt
| 1 | +Broadcom STB wake-up Timer | |
| 2 | + | |
| 3 | +The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the | |
| 4 | +ability to wake up the system from low-power suspend/standby modes. | |
| 5 | + | |
| 6 | +Required properties: | |
| 7 | +- compatible : should contain "brcm,brcmstb-waketimer" | |
| 8 | +- reg : the register start and length for the WKTMR block | |
| 9 | +- interrupts : The TIMER interrupt | |
| 10 | +- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2 | |
| 11 | + interrupt controller node | |
| 12 | +- clocks : The phandle to the UPG fixed clock (27Mhz domain) | |
| 13 | + | |
| 14 | +Example: | |
| 15 | + | |
| 16 | +waketimer@f0411580 { | |
| 17 | + compatible = "brcm,brcmstb-waketimer"; | |
| 18 | + reg = <0xf0411580 0x14>; | |
| 19 | + interrupts = <0x3>; | |
| 20 | + interrupt-parent = <&aon_pm_l2_intc>; | |
| 21 | + clocks = <&upg_fixed>; | |
| 22 | +}; |