sunxi: Add defconfig and dts file for the Orange Pi Lite SBC

The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>

sunxi: Add defconfig and dts file for the Orange Pi Lite SBC
The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede
1 parent fa8a485d06
Showing 4 changed files with 195 additions and 0 deletions Side-by-side Diff
arch/arm/dts/Makefile
arch/arm/dts/sun8i-h3-orangepi-lite.dts
board/sunxi/MAINTAINERS
configs/orangepi_lite_defconfig
@@ -242,6 +242,7 @@
 	sun8i-a83t-sinovoip-bpi-m3.dtb
 dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
 	sun8i-h3-orangepi-one.dtb \
 	sun8i-h3-orangepi-pc.dtb \
 	sun8i-h3-orangepi-plus.dtb
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet1 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
@@ -56,6 +56,7 @@
 F:	configs/gt90h_v4_defconfig
 F:	configs/inet86dz_defconfig
 F:	configs/orangepi_2_defconfig
+F:	configs/orangepi_lite_defconfig
 F:	configs/orangepi_one_defconfig
 F:	configs/orangepi_pc_defconfig
 F:	configs/orangepi_plus_defconfig
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PF6"
+# CONFIG_VIDEO is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_USB_EHCI_HCD=y
...	...	@@ -242,6 +242,7 @@
242	242	sun8i-a83t-sinovoip-bpi-m3.dtb
243	243	dtb-$(CONFIG_MACH_SUN8I_H3) += \
244	244	sun8i-h3-orangepi-2.dtb \
	245	+ sun8i-h3-orangepi-lite.dtb \
245	246	sun8i-h3-orangepi-one.dtb \
246	247	sun8i-h3-orangepi-pc.dtb \
247	248	sun8i-h3-orangepi-plus.dtb
	1	+/*
	2	+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
	3	+ *
	4	+ * This file is dual-licensed: you can use it either under the terms
	5	+ * of the GPL or the X11 license, at your option. Note that this dual
	6	+ * licensing only applies to this file, and not this project as a
	7	+ * whole.
	8	+ *
	9	+ * a) This file is free software; you can redistribute it and/or
	10	+ * modify it under the terms of the GNU General Public License as
	11	+ * published by the Free Software Foundation; either version 2 of the
	12	+ * License, or (at your option) any later version.
	13	+ *
	14	+ * This file is distributed in the hope that it will be useful,
	15	+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	+ * GNU General Public License for more details.
	18	+ *
	19	+ * Or, alternatively,
	20	+ *
	21	+ * b) Permission is hereby granted, free of charge, to any person
	22	+ * obtaining a copy of this software and associated documentation
	23	+ * files (the "Software"), to deal in the Software without
	24	+ * restriction, including without limitation the rights to use,
	25	+ * copy, modify, merge, publish, distribute, sublicense, and/or
	26	+ * sell copies of the Software, and to permit persons to whom the
	27	+ * Software is furnished to do so, subject to the following
	28	+ * conditions:
	29	+ *
	30	+ * The above copyright notice and this permission notice shall be
	31	+ * included in all copies or substantial portions of the Software.
	32	+ *
	33	+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	34	+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	35	+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	36	+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	37	+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	38	+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	39	+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	40	+ * OTHER DEALINGS IN THE SOFTWARE.
	41	+ */
	42	+
	43	+/dts-v1/;
	44	+#include "sun8i-h3.dtsi"
	45	+#include "sunxi-common-regulators.dtsi"
	46	+
	47	+#include <dt-bindings/gpio/gpio.h>
	48	+#include <dt-bindings/input/input.h>
	49	+#include <dt-bindings/pinctrl/sun4i-a10.h>
	50	+
	51	+/ {
	52	+ model = "Xunlong Orange Pi Lite";
	53	+ compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
	54	+
	55	+ aliases {
	56	+ /* The H3 emac is not used so the wifi is ethernet0 */
	57	+ ethernet1 = &rtl8189ftv;
	58	+ serial0 = &uart0;
	59	+ };
	60	+
	61	+ chosen {
	62	+ stdout-path = "serial0:115200n8";
	63	+ };
	64	+
	65	+ leds {
	66	+ compatible = "gpio-leds";
	67	+ pinctrl-names = "default";
	68	+ pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
	69	+
	70	+ pwr_led {
	71	+ label = "orangepi:green:pwr";
	72	+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
	73	+ default-state = "on";
	74	+ };
	75	+
	76	+ status_led {
	77	+ label = "orangepi:red:status";
	78	+ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
	79	+ };
	80	+ };
	81	+
	82	+ r_gpio_keys {
	83	+ compatible = "gpio-keys";
	84	+ pinctrl-names = "default";
	85	+ pinctrl-0 = <&sw_r_opc>;
	86	+
	87	+ sw4 {
	88	+ label = "sw4";
	89	+ linux,code = <BTN_0>;
	90	+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
	91	+ };
	92	+ };
	93	+};
	94	+
	95	+&ehci1 {
	96	+ status = "okay";
	97	+};
	98	+
	99	+&ehci2 {
	100	+ status = "okay";
	101	+};
	102	+
	103	+&ir {
	104	+ pinctrl-names = "default";
	105	+ pinctrl-0 = <&ir_pins_a>;
	106	+ status = "okay";
	107	+};
	108	+
	109	+&mmc0 {
	110	+ pinctrl-names = "default";
	111	+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
	112	+ vmmc-supply = <&reg_vcc3v3>;
	113	+ bus-width = <4>;
	114	+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
	115	+ cd-inverted;
	116	+ status = "okay";
	117	+};
	118	+
	119	+&mmc1 {
	120	+ pinctrl-names = "default";
	121	+ pinctrl-0 = <&mmc1_pins_a>;
	122	+ vmmc-supply = <&reg_vcc3v3>;
	123	+ bus-width = <4>;
	124	+ non-removable;
	125	+ status = "okay";
	126	+
	127	+ /*
	128	+ * Explicitly define the sdio device, so that we can add an ethernet
	129	+ * alias for it (which e.g. makes u-boot set a mac-address).
	130	+ */
	131	+ rtl8189ftv: sdio_wifi@1 {
	132	+ reg = <1>;
	133	+ };
	134	+};
	135	+
	136	+&ohci1 {
	137	+ status = "okay";
	138	+};
	139	+
	140	+&ohci2 {
	141	+ status = "okay";
	142	+};
	143	+
	144	+&pio {
	145	+ leds_opc: led_pins@0 {
	146	+ allwinner,pins = "PA15";
	147	+ allwinner,function = "gpio_out";
	148	+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	149	+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	150	+ };
	151	+};
	152	+
	153	+&r_pio {
	154	+ leds_r_opc: led_pins@0 {
	155	+ allwinner,pins = "PL10";
	156	+ allwinner,function = "gpio_out";
	157	+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	158	+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	159	+ };
	160	+
	161	+ sw_r_opc: key_pins@0 {
	162	+ allwinner,pins = "PL3";
	163	+ allwinner,function = "gpio_in";
	164	+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	165	+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	166	+ };
	167	+};
	168	+
	169	+&uart0 {
	170	+ pinctrl-names = "default";
	171	+ pinctrl-0 = <&uart0_pins_a>;
	172	+ status = "okay";
	173	+};
	174	+
	175	+&usbphy {
	176	+ /* USB VBUS is always on */
	177	+ status = "okay";
	178	+};
...	...	@@ -56,6 +56,7 @@
56	56	F: configs/gt90h_v4_defconfig
57	57	F: configs/inet86dz_defconfig
58	58	F: configs/orangepi_2_defconfig
	59	+F: configs/orangepi_lite_defconfig
59	60	F: configs/orangepi_one_defconfig
60	61	F: configs/orangepi_pc_defconfig
61	62	F: configs/orangepi_plus_defconfig
	1	+CONFIG_ARM=y
	2	+CONFIG_ARCH_SUNXI=y
	3	+CONFIG_MACH_SUN8I_H3=y
	4	+CONFIG_DRAM_CLK=672
	5	+CONFIG_DRAM_ZQ=3881979
	6	+CONFIG_DRAM_ODT_EN=y
	7	+CONFIG_MMC0_CD_PIN="PF6"
	8	+# CONFIG_VIDEO is not set
	9	+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite"
	10	+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
	11	+CONFIG_SPL=y
	12	+# CONFIG_CMD_IMLS is not set
	13	+# CONFIG_CMD_FLASH is not set
	14	+# CONFIG_CMD_FPGA is not set
	15	+CONFIG_USB_EHCI_HCD=y