Commit 7e4c5d207398ac38c5b97a7c99d79f0a518cc015
Committed by
Hans de Goede
1 parent
3cc7177913
Exists in
v2017.01-smarct4x
and in
29 other branches
sunxi: Cubietruck Plus: Enable USB Kconfig options in defconfig
The Cubietruck Plus uses all 3 USB controllers: - USB OTG functions are provided by the musb USB OTG controller - Onboard SATA is provied by a USB-SATA bridge connected to USB1 - The USB host ports on the board are provided by an HSIC USB hub FLDO1 is set to 1.2V for HSIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Showing 1 changed file with 9 additions and 1 deletions Side-by-side Diff
configs/Cubietruck_plus_defconfig
... | ... | @@ -6,14 +6,22 @@ |
6 | 6 | CONFIG_DRAM_ODT_EN=y |
7 | 7 | CONFIG_MMC0_CD_PIN="PF6" |
8 | 8 | CONFIG_I2C0_ENABLE=y |
9 | +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" | |
10 | +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" | |
11 | +CONFIG_USB0_ID_DET="PH11" | |
12 | +CONFIG_USB1_VBUS_PIN="PD29" | |
13 | +CONFIG_USB2_VBUS_PIN="PL6" | |
9 | 14 | CONFIG_AXP_GPIO=y |
10 | 15 | CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus" |
11 | 16 | # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set |
12 | 17 | CONFIG_SPL=y |
13 | -CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)" | |
14 | 18 | # CONFIG_CMD_IMLS is not set |
15 | 19 | # CONFIG_CMD_FLASH is not set |
16 | 20 | # CONFIG_CMD_FPGA is not set |
21 | +CONFIG_CMD_GPIO=y | |
17 | 22 | CONFIG_AXP_DLDO3_VOLT=2500 |
18 | 23 | CONFIG_AXP_DLDO4_VOLT=3300 |
24 | +CONFIG_AXP_FLDO1_VOLT=1200 | |
25 | +CONFIG_USB_EHCI_HCD=y | |
26 | +CONFIG_USB_MUSB_HOST=y |