Commit
998250f78499a97bfa1ec032e31a6485b1e9538d
Exists in
v2017.01-smarct4x
and in
26 other branches
8qm-imx_v2020.04_5.4.70_2.3.0, emb_lf_v2022.04, emb_lf_v2023.04, pitx_8mp_lf_v2020.04, smarc-8m-android-10.0.0_2.6.0, smarc-8m-android-11.0.0_2.0.0, smarc-8mp-android-11.0.0_2.0.0, smarc-imx6_v2018.03_4.14.98_2.0.0_ga, smarc-imx7_v2017.03_4.9.11_1.0.0_ga, smarc-imx7_v2018.03_4.14.98_2.0.0_ga, smarc-imx_v2017.03_4.9.11_1.0.0_ga, smarc-imx_v2017.03_4.9.88_2.0.0_ga, smarc-imx_v2017.03_o8.1.0_1.3.0_8m, smarc-imx_v2018.03_4.14.78_1.0.0_ga, smarc-n7.1.2_2.0.0-ga, smarc_8m-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8m-imx_v2019.04_4.19.35_1.1.0, smarc_8m_00d0-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8mm-imx_v2018.03_4.14.98_2.0.0_ga, smarc_8mm-imx_v2019.04_4.19.35_1.1.0, smarc_8mm-imx_v2020.04_5.4.24_2.1.0, smarc_8mp_lf_v2020.04, smarc_8mq-imx_v2020.04_5.4.24_2.1.0, smarc_8mq_lf_v2020.04, v2017.01-smarct3x, v2017.01-smarct3x-emmc
configs: am43x: hs: Modify SPL load address to fix UART boot issue
An issue in the TI secure image generation tool causes the ROM to
load the SPL at a different load address than what is specified by
CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot.
This causes the SPL to fail on secure devices during peripheral
boot.
The TI secure image generation tool has been fixed so that the SPL
will always be loaded at 0x403018E0 by the ROM code for both
peripheral and memory boot modes. am43x hs defconfig file have been
updated to reflect this change.
Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Showing
1 changed file
with
1 additions
and
1 deletions
Side-by-side Diff
| ... |
... |
@@ -2,7 +2,7 @@ |
|
2
|
2 |
CONFIG_AM43XX=y |
|
3
|
3 |
CONFIG_TI_SECURE_DEVICE=y |
|
4
|
4 |
CONFIG_TARGET_AM43XX_EVM=y |
|
5
|
|
-CONFIG_ISW_ENTRY_ADDR=0x40302ae0 |
|
|
5 |
+CONFIG_ISW_ENTRY_ADDR=0x403018e0 |
|
6
|
6 |
CONFIG_SPL_STACK_R_ADDR=0x82000000 |
|
7
|
7 |
CONFIG_SPL_YMODEM_SUPPORT=y |
|
8
|
8 |
CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" |
Tom Rini