Commit a9046b9e1aeeedc66ddf1d00474ad0ce8c6aa6e4
1 parent
f986325dd5
Exists in
master
and in
54 other branches
Prepare v2010-rc2
Signed-off-by: Wolfgang Denk <wd@denx.de>
Showing 3 changed files with 288 additions and 5 deletions Side-by-side Diff
CHANGELOG
1 | +commit f986325dd569faeaec4186f678d113505c5c4828 | |
2 | +Author: Ron Madrid <ron_madrid@sbcglobal.net> | |
3 | +Date: Tue Jun 1 17:00:49 2010 -0700 | |
4 | + | |
5 | + Update SICRL_USBDR to reflect 4 different settings | |
6 | + | |
7 | + This patch changed the SICRL_USBDR define to reflect the 4 different bit | |
8 | + settings for this two-bit field. The four different options are '00', '01', | |
9 | + '10', and '11'. This patch also corrects the config file for SIMPC8313 and | |
10 | + MPC8313ERDB for the appropriate fields. This change only affects the MPC8313 | |
11 | + cpu. | |
12 | + | |
13 | + Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> | |
14 | + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
15 | + | |
16 | +commit 3057c6be5efda781a72ca04432e0a4ed6e670030 | |
17 | +Author: Kim Phillips <kim.phillips@freescale.com> | |
18 | +Date: Fri Apr 23 12:20:11 2010 -0500 | |
19 | + | |
20 | + fdt_support: add entry for sec3.1 and fix sec3.3 | |
21 | + | |
22 | + Add sec3.1 h/w geometry for fdt node fixups. | |
23 | + | |
24 | + Also, technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor | |
25 | + type, it lacks the ARC4 algorithm execution unit required to be able | |
26 | + to execute anything meaningful with it. Change the node to agree with | |
27 | + the documentation that declares that the sec3.3 really doesn't have such | |
28 | + a descriptor type. | |
29 | + | |
30 | + Reported-by: Haiying Wang <Haiying.Wang@freescale.com> | |
31 | + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
32 | + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
33 | + | |
34 | +commit 5f4d36825a028e300b7d56a566d2cf84418b7a68 | |
35 | +Author: Timur Tabi <timur@freescale.com> | |
36 | +Date: Thu May 20 11:16:16 2010 -0500 | |
37 | + | |
38 | + fsl: rename 'dma' to 'brdcfg1' in the ngPIXIS structure | |
39 | + | |
40 | + The ngPIXIS is a board-specific FPGA, but the definition of the registers | |
41 | + is mostly consistent. On boards where it matter, register 9 is called | |
42 | + 'brdcfg1' instead of 'dma', so rename the variable in the ngpixis_t | |
43 | + definition. | |
44 | + | |
45 | + Signed-off-by: Timur Tabi <timur@freescale.com> | |
46 | + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
47 | + | |
48 | +commit 6e37a044076896ba88b0d6316fadd492032c5193 | |
49 | +Author: Timur Tabi <timur@freescale.com> | |
50 | +Date: Thu May 20 12:45:39 2010 -0500 | |
51 | + | |
52 | + fsl/85xx: add clkdvdr and pmuxcr2 to global utilities structure definition | |
53 | + | |
54 | + Add the 'clkdvdr' and 'pmuxcr2' registers to the 85xx definition of | |
55 | + struct ccsr_gur. | |
56 | + | |
57 | + Signed-off-by: Timur Tabi <timur@freescale.com> | |
58 | + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
59 | + | |
60 | +commit 39c209546ab5b11ca6410c5cc57dcbf457e50800 | |
61 | +Author: Tom <Tom@bumblecow.com> | |
62 | +Date: Fri May 28 13:23:16 2010 -0500 | |
63 | + | |
64 | + ARM Update mach-types | |
65 | + | |
66 | + Fetched from http://www.arm.linux.org.uk/developer/machines/download.php | |
67 | + And built with | |
68 | + | |
69 | + repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm | |
70 | + commit 3defb2476166445982a90c12d33f8947e75476c4 | |
71 | + | |
72 | + Signed-off-by: Tom <Tom@bumblecow.com> | |
73 | + | |
74 | +commit 551bd947bd6f982fa38dde840576eba52346160c | |
75 | +Author: Tom <Tom@bumblecow.com> | |
76 | +Date: Sun May 9 16:58:11 2010 -0500 | |
77 | + | |
78 | + ARM Update mach-types | |
79 | + | |
80 | + Fetched from http://www.arm.linux.org.uk/developer/machines/download.php | |
81 | + And built with | |
82 | + | |
83 | + repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm | |
84 | + commit 257dab81413b31b8648becfe11586b3a41e5c29a | |
85 | + | |
86 | + Signed-off-by: Tom <Tom@bumblecow.com> | |
87 | + | |
88 | +commit 1117cbf2adac59050af1751af6c6a524afa5c3ef | |
89 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
90 | +Date: Fri May 28 10:56:50 2010 +0800 | |
91 | + | |
92 | + nios: remove nios-32 arch | |
93 | + | |
94 | + The nios-32 arch is obsolete and broken. So it is removed. | |
95 | + | |
96 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
97 | + | |
98 | +commit 6803336c9f21ba428f5c1b1cf825bbbac0a762e5 | |
99 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
100 | +Date: Fri May 21 11:08:02 2010 +0800 | |
101 | + | |
102 | + nios2: allow STANDALONE_LOAD_ADDR overriding | |
103 | + | |
104 | + This patch allows users to override default STANDALONE_LOAD_ADDR. | |
105 | + The gcclibdir path was duplicated in the standalone Makefile and | |
106 | + can be removed. | |
107 | + | |
108 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
109 | + Signed-off-by: Scott McNutt <smcnutt@psyent.com> | |
110 | + | |
111 | +commit 8d52ea6db484c689a75ef8a36a4e525753b8f078 | |
112 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
113 | +Date: Sat May 15 06:00:05 2010 +0800 | |
114 | + | |
115 | + nios2: fix div64 issue for gcc4 | |
116 | + | |
117 | + This patch fixes the run-time error on div64 when built with | |
118 | + gcc4, which was reported by jhwu0625 on nios forum. It merges | |
119 | + math support from libgcc of gcc4. This patch is copied from | |
120 | + nios2-linux. | |
121 | + | |
122 | + It works with both gcc3 and gcc4. The old mult.c, divmod.c and | |
123 | + math.h are removed. | |
124 | + | |
125 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
126 | + Signed-off-by: Scott McNutt <smcnutt@psyent.com> | |
127 | + | |
128 | +commit 0df01fd3d71481b5cc7aeea6a741b9fc3be15178 | |
129 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
130 | +Date: Fri May 21 11:08:03 2010 +0800 | |
131 | + | |
132 | + nios2: fix r15 issue for gcc4 | |
133 | + | |
134 | + The "-ffixed-r15" option doesn't work well for gcc4. Since we | |
135 | + don't use gp for small data with option "-G0", we can use gp | |
136 | + as global data pointer. This allows compiler to use r15. It | |
137 | + is necessary for gcc4 to work properly. | |
138 | + | |
139 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
140 | + Signed-off-by: Scott McNutt <smcnutt@psyent.com> | |
141 | + | |
142 | +commit 661ba14051db6766932fcb50ba1ec7c67f230054 | |
143 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
144 | +Date: Fri Apr 30 11:34:16 2010 +0800 | |
145 | + | |
146 | + spi: add altera spi controller support | |
147 | + | |
148 | + This patch adds the driver of altera spi controller, which is | |
149 | + used as epcs/spi flash controller. It also works with mmc_spi | |
150 | + driver. | |
151 | + | |
152 | + This driver support more than one spi bus, with base list declared | |
153 | + #define CONFIG_SYS_ALTERA_SPI_LIST { BASE_0,BASE_1,... } | |
154 | + | |
155 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
156 | + Tested-by: Ian Abbott <abbotti@mev.co.uk> | |
157 | + Signed-off-by: Scott McNutt <smcnutt@psyent.com> | |
158 | + | |
159 | +commit 1e8e9bad2db38e93c3bc9f4b6238b3d8be99e469 | |
160 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
161 | +Date: Fri Apr 30 11:34:15 2010 +0800 | |
162 | + | |
163 | + nios2: add gpio support to nios2-generic board | |
164 | + | |
165 | + This patch adds gpio support of Altera PIO component to the | |
166 | + nios2-generic board. Though it drives only gpio_led at the | |
167 | + moment, it supports bidirectional port to control bit-banging | |
168 | + I2C, NAND flash busy status or button switches, etc. | |
169 | + | |
170 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
171 | + Tested-by: Ian Abbott <abbotti@mev.co.uk> | |
172 | + Signed-off-by: Scott McNutt <smcnutt@psyent.com> | |
173 | + | |
174 | +commit 3e6b86b5552840bb4147871a753840eb3923374c | |
175 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
176 | +Date: Fri Apr 30 11:34:14 2010 +0800 | |
177 | + | |
178 | + misc: add gpio based status led driver | |
179 | + | |
180 | + This patch adds a status led driver followed the GPIO access | |
181 | + conventions of Linux. The led mask is used to specify the gpio pin. | |
182 | + | |
183 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
184 | + Tested-by: Ian Abbott <abbotti@mev.co.uk> | |
185 | + Signed-off-by: Scott McNutt <smcnutt@psyent.com> | |
186 | + | |
187 | +commit cedd341d551b6b705e97ab1953a87575b9ff9ef9 | |
188 | +Author: Thomas Chou <thomas@wytron.com.tw> | |
189 | +Date: Fri Apr 30 11:34:13 2010 +0800 | |
190 | + | |
191 | + nios2: add gpio support | |
192 | + | |
193 | + This patch adds driver for a trivial gpio core, which is described | |
194 | + in http://nioswiki.com/GPIO. It is used for gpio led and nand flash | |
195 | + interface in u-boot. | |
196 | + | |
197 | + When CONFIG_SYS_GPIO_BASE is not defined, board may provide | |
198 | + its own driver. | |
199 | + | |
200 | + Signed-off-by: Thomas Chou <thomas@wytron.com.tw> | |
201 | + Tested-by: Ian Abbott <abbotti@mev.co.uk> | |
202 | + Signed-off-by: Scott McNutt <smcnutt@psyent.com> | |
203 | + | |
204 | +commit adf55679af1ed98c15a136eb81d6204ebe740b30 | |
205 | +Author: Wolfgang Wegner <w.wegner@astro-kom.de> | |
206 | +Date: Tue Mar 30 19:19:51 2010 +0100 | |
207 | + | |
208 | + add CONFIG_SYS_FEC_FULL_MII for MCF5445x | |
209 | + | |
210 | + This patch adds support for full MII interface on MCF5445x (in contrast | |
211 | + to RMII as used on the evaluation boards). | |
212 | + | |
213 | + Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de> | |
214 | + | |
215 | +commit ae49099755affc942171a7727c1b12c51d167abf | |
216 | +Author: Wolfgang Wegner <w.wegner@astro-kom.de> | |
217 | +Date: Tue Mar 30 19:19:50 2010 +0100 | |
218 | + | |
219 | + add CONFIG_SYS_FEC_NO_SHARED_PHY for MCF5445x | |
220 | + | |
221 | + This patch adds the possibility to handle seperate PHYs to MCF5445x. | |
222 | + Naming is chosen to resemble the contrary CONFIG_FEC_SHARED_PHY in the | |
223 | + linux kernel. | |
224 | + | |
225 | + Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de> | |
226 | + | |
227 | +commit e9b43cae1a20af13d1baeb13038b3f34905c14b5 | |
228 | +Author: Wolfgang Wegner <w.wegner@astro-kom.de> | |
229 | +Date: Tue Mar 30 19:20:31 2010 +0100 | |
230 | + | |
231 | + add missing PCS3 for MCF5445x | |
232 | + | |
233 | + This patch adds the code for handling PCS3 (DSPI chip select 3) in | |
234 | + cpu_init.c and m5445x.h | |
235 | + | |
236 | + Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de> | |
237 | + | |
238 | +commit d0fe1128c4451327b9cb0fac1a76efd194b078b5 | |
239 | +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
240 | +Date: Wed May 26 21:26:43 2010 +0400 | |
241 | + | |
242 | + USB: fix create_pipe() | |
243 | + | |
244 | + create_pipe() can give wrong result if an expression is passed as the 'endpoint' | |
245 | + argument -- due to missing parentheses. | |
246 | + | |
247 | + Thanks to Martin Mueller for finding the bug and providing the patch. | |
248 | + | |
249 | + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
250 | + | |
251 | +commit c941b77adc40f344215e367b3d1fc638addff870 | |
252 | +Author: Andrew Caldwell <Andrew.Caldwell@analog.com> | |
253 | +Date: Fri May 7 15:10:07 2010 -0400 | |
254 | + | |
255 | + Blackfin: nand: drain the write buffer before returning | |
256 | + | |
257 | + The current Blackfin nand write function fills up the write buffer but | |
258 | + returns before it has had a chance to drain. On faster systems, this | |
259 | + isn't a problem as the operation finishes before the ECC registers are | |
260 | + read, but on slower systems the ECC may be incomplete when the core tries | |
261 | + to read it. | |
262 | + | |
263 | + So wait for the buffer to drain once we're done writing to it. | |
264 | + | |
265 | + Signed-off-by: Andrew Caldwell <Andrew.Caldwell@analog.com> | |
266 | + Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
267 | + | |
268 | +commit 01f03bda5b22e5aeae5f02fd537da97a41485c73 | |
269 | +Author: Wolfgang Denk <wd@denx.de> | |
270 | +Date: Wed May 26 23:57:08 2010 +0200 | |
271 | + | |
272 | + Prepare v2010.06-rc1 | |
273 | + | |
274 | + Signed-off-by: Wolfgang Denk <wd@denx.de> | |
275 | + | |
276 | +commit c4976807cbbabd281f45466ac5e47e5639bcc9cb | |
277 | +Author: Wolfgang Denk <wd@denx.de> | |
278 | +Date: Wed May 26 23:51:22 2010 +0200 | |
279 | + | |
280 | + Coding style cleanup, update CHANGELOG. | |
281 | + | |
282 | + Signed-off-by: Wolfgang Denk <wd@denx.de> | |
283 | + | |
1 | 284 | commit c7da8c19b5f7fd58b5b4b1d247648851af56e1f0 |
2 | 285 | Author: Andreas Biessmann <andreas.devel@googlemail.com> |
3 | 286 | Date: Sat May 22 13:17:21 2010 +0200 |
Makefile
README
... | ... | @@ -143,9 +143,9 @@ |
143 | 143 | /cpu CPU specific files |
144 | 144 | /arm720t Files specific to ARM 720 CPUs |
145 | 145 | /arm920t Files specific to ARM 920 CPUs |
146 | - /at91rm9200 Files specific to Atmel AT91RM9200 CPU | |
147 | - /imx Files specific to Freescale MC9328 i.MX CPUs | |
148 | - /s3c24x0 Files specific to Samsung S3C24X0 CPUs | |
146 | + /at91rm9200 Files specific to Atmel AT91RM9200 CPU | |
147 | + /imx Files specific to Freescale MC9328 i.MX CPUs | |
148 | + /s3c24x0 Files specific to Samsung S3C24X0 CPUs | |
149 | 149 | /arm925t Files specific to ARM 925 CPUs |
150 | 150 | /arm926ejs Files specific to ARM 926 CPUs |
151 | 151 | /arm1136 Files specific to ARM 1136 CPUs |
... | ... | @@ -2504,7 +2504,7 @@ |
2504 | 2504 | I2C muxes, you can define here, how to reach this |
2505 | 2505 | EEPROM. For example: |
2506 | 2506 | |
2507 | - #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d "pca9547:70:d\0"" | |
2507 | + #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d "pca9547:70:d\0"" | |
2508 | 2508 | |
2509 | 2509 | EEPROM which holds the environment, is reached over |
2510 | 2510 | a pca9547 i2c mux with address 0x70, channel 3. |